Because these command lines don't start with "$(MAKE)", we should
tell make that we are recursing. Without this, the child make
can't run more than one job in parallel (and warns about this).
These packages don't contain binaries or libraries. The dependencies
on the corresponding shared library packages are specified directly,
not generated by dpkg-shlibdeps.
This fixes build-time warnings from dpkg-gencontrol.
- asciidoctor is only used to build the linux-perf package, so !nopython
- patchutils is only used to build the linux-source package, so
!pkg.linux.nosource
Several regexes were written as normal strings. Thankfully it appears
that none of the backslash-escaped sequences in them are parsed in
normal strings, so this shouldn't make any practical difference.
linux-perf wants to build a 32-bit program perf-read-vdso32 to enable
64-bit perf builds to read the vDSO for 32-bit tasks. This is now
worth doing for MIPS since it got a vDSO in Linux 4.4.
Ideally we should not require any special profile to be enabled for a
cross-build. (Unfortunately we still will because cross-compiler
and native compiler packages are named differently.)
For a native build, the build-dependency on libssl-dev is redundant
with the previous build-dependency on libssl-dev:native, so this
shouldn't make any practical difference.
Change all the build-dependencies for perf to be qualified by the
architectures we actually build perf for, except where they are
already arch-qualified.
Closes: #908519
The drivers in pata-modules depend on libata, which depends on scsi_mod.
The corresponding package dependencies pata-modules -> ata-modules
-> scsi-core-modules are already defined, and there is no sense in
adding a direct dependency from pata-modules to scsi-core-modules.
The usb-storage driver depends on scsi_mod in scsi-core-modules, not
any of the drivers in scsi-modules.
Merge the configuration and default-configuration directories,
using per-architecture overrides in package-list.
This requires a newer version of kernel-wedge to support
Depends_<arch> properly.
The only immediate change to debian/control is to remove the
different description for nic-modules on sparc64.
The hppa64 packages were listed twice with profile restrictions of
<!stage1 !cross> and <!stage1 cross>, which is equivalent to listing
them once with <!stage1>.
-----BEGIN PGP SIGNATURE-----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=Qmdt
-----END PGP SIGNATURE-----
Merge tag 'debian/4.17.17-1'
Release linux (4.17.17-1).
- Drop "gpu: host1x: Fix compiler errors by converting to dma_addr_t"
which is already in 4.18
- Drop ABI reference files and ABI number change
This reverts commit b91655bf3e and part
of commit 16dec97798.
The signing service is still using secure-boot-test-key-lfaraone and
we should make at least one more upload to be signed by it.
Drop x86-l1tf-fix-build-error-seen-if-config_kvm_intel-is-disabled.patch
Drop x86-i8259-add-missing-include-file.patch
Drop bluetooth-hidp-buffer-overflow-in-hidp_process_report.patch
Cleanup debian/changelog file
Currently, CONFIG_SPI is enabled globally. The purpose of SPIDEV is to
allow userspace to access SPI in a generic way, when SPI is supported on
the target. For arches that don't support SPI or disable it explicitly,
like m68k, both features will be disabled.
I converted the main patch series to quilt format in 3.2.20-1, but
this patch system was still used by genorig.py. One useful
feature that was not available elsewhere was using patch + unifdef
to exclude only part of a source file. However no source files
have needed this since 3.16-rc4 and I don't expect this to ever
be needed again.
The preceding changes moved the file removal/exclusion list into
debian/copyright and the disabling of broken features into the
main patch series, so the private patch system isn't doing
anything.
So we can now remove it completely.
The upstream Makefile uses DEBUG to control both stripping of debug
information *and* disabling optimisations.
We want to disable stripping of debug information so that (normally)
dh_strip can move it into a separate package later. However we also
want to enable optimisations by default.
Therefore:
- Set the STRIP variable (a command prefix) to "true"
- Set the DEBUG variable (a pseudo-boolean) to "true" if and only if
the "noopt" build option is used
These two are terse by default and don't respect the KBUILD_VERBOSE
environment variable.
(I considered adding V=1 to the MAKEFLAGS we use by default in
debian/rules.real, but this might have different semantics for the few
tools that aren't built using either kbuild or automake.)
This adds support for PREEMPT_RT by adding two new featureset: none and
rt. For now the rt featureset supports armmp only, support for lpae
might be added later. the none featureset supports both flavours armmp
and armmp-lpae.
-----BEGIN PGP SIGNATURE-----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=JUfi
-----END PGP SIGNATURE-----
Merge tag 'debian/4.17.6-2'
Release linux (4.17.6-2).
- Drop the ABI maintenance patch
- Resolve conflict between changes to config file generation in sid
(delete CONFIG_BUILD_SALT) and master (putting them in
arch-dependent packages)
Closes: #872263
- kbuild: Add build salt to the kernel and modules
- [arm64,powerpc,x86] Add build salt to the vDSO
- Set BUILD_SALT equal to the release string
The previous fix ensured that objtool was built for the right host
architecture, but it was still including some UAPI header files
(in particular <asm/bitsperlong.h>) for the build architecture.
Currently we replicate the mapping of Debian architectures to kernel
source architectures here. Use the KERNEL_ARCH variable that is now
passed down by rules.real. We still need to check whether perf is
supported on the architecture, though.
-----BEGIN PGP SIGNATURE-----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=VAyl
-----END PGP SIGNATURE-----
Merge tag 'debian/4.17.6-1'
Release linux (4.17.6-1).
- Drop patches for ABI maintenance or that are already upstream
- Drop ABI reference files
- Introduce linux-bootwrapper-<abiname> package containing boot wrapper
tools for the host architecture
- linux-image: Install symlinks to boot wrapper tools instead of the
native tools built by kbuild
This updates the debian changelog for listing changes of this stable
update. It also removes the patches that have been merged upstream.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
objtool is normally built and used during the kernel build process,
in which case it should always be built as a native executable.
But when we build it for linux-tools it should match the target
architecture. We need to override the CC and LD variables to
make this work.
For parallel display outputs like RGB panels on i.MX device
DRM_IMX_PARALLEL_DISPLAY needs to be enabled
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
In Linux 4.18, various compiler version and feature tests are invoked
via kconfig rather than via kbuild. This means that we generally
cannot generate kconfig files for foreign architectures.
Move the config files to a new linux-config-<version> package which is
arch-dependent (and also M-A: same).
Make linux-config-<version> and linux-source-<version> recommend each
other.
We generate all config files when building linux-source-<version>,
and this requires running kconfig. kconfig is now built using
bison and flex instead of requiring their output to be already
included in the source tree.
- Various config symbols were removed, renamed or split
- HOTPLUG_PCI_SHPC is now boolean, so set it to built-in
- The stack protector config symbols were changed to two booleans
with different names
AM35x use EDMA for McASP audio SoC, resulting in a "missing
SND_EDMA_SOC" message during probe. This enables the support.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Closes: #898087
We always used to match arbitrary revision suffixes, but in commit
f4dbf1aa82 ".../debian.py: Fix binNMU revision parsing" I excluded
'+' from the revision_other to ensure that it wouldn't match a
binNMU suffix (which is matched separately).
Stop excluding '+' from the revision_other group, and change the
repetition to non-greedy so that any binNMU suffix will still match
the following group.
Ben Hutchings
Romain Perier
Romain Perier
Salvatore Bonaccorso
Bastian Blank
Uwe Kleine-König
Vagrant Cascadian
John Paul Adrian Glaubitz
Cyril Brulebois
Sjoerd Simons
YunQiang Su