Register GPIO7 as heartbeat LED, same as in the linux kernel.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add i2c-omap and twlcore driver to panda board.
(Based on similar patch for pcm049).
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the pcm038 board to the new environment template and
does the necessary defaultconfig adjustments. Additionally it disables
UBI support as the pcm038 image is getting bigger and bigger and UBI
seems to be the most unused big (in size) feature.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this patch also cleans the source by putting in device_init
the code which is actually in console_init and has nothing
to see with the console.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
else USB device doesn't work as the hardware fix is present on the
boards
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is limited board support for the Freescale P2020RDB in single CPU
mode. The DDR is configured for a memory bus running at 667Mhz.
The system boots from NOR flash and provides the console at 115200
bauds, no other drivers are included.
Finally, the PPC Kconfig and make file make the building of
the P2020RDB platform firmware possible.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Kconfig and Makefile allow to include the 85xx cpu support in the
compilation process.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
_text_base assignment has been removed earlier from lib/board.c
for the mpc5xxx.
For the 85xx, _text_base is set to where the firmware relocates
in memory as passed by the function input variable.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds initialization functions used by the e500v2 start-up code
and board specific code (L2 cache initialization).
Other functions help identify the CPU or return the programmed memory size.
Finally, the Makefile and Kconfig file are added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch contains functions that returns information on
the CPU and buses frequency (LBC, DDR, system).
It also includes the clock source driver.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch includes functions to initialize LAW registers and
the chip select 0 of the CPU.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch defines functions to set interrupt vector registers and
functions to handle hardware exceptions.
It also defines support functions to set and search TLBs.
Finally, the Makefile is added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is the first part of the start-up code. The source code origin is
U-boot and is slightly modified to have e500v2 CPU support in 32-bit
mode only.
It includes the power-up entry point, CPU initialization code and
exports definition for D-cache flush and I-cache invalidate.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These header files are added to provide a minimal support to the
Freescale 85xx cpu to boot on a P2020RDB platform.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch reflects real naming of SPI by Freescale.
We have two ECSPI channels and one CSPI.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a check to verify if /barebox.BIP0 exists, and if so,
unlock the protection area, flash barebox, and reprotect the
area.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To speed-up linux kernel loading, switch the PXA cpu to the
maximum allowed frequency (520 MHz). This improves the load
time from several seconds to less than a second from the
MTD.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order for barebox to be functional, the docg3 DPS1 has to
protect barebox from writes, and have its embedded IPL coded
to load barebox (as barebox is the SPL).
Add a raw DPS1, which :
- protects the area from block 6 to block 123
This is DPS1 + barebox + barebox-logo
- encodes the 2048 bytes IPL
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make the autoboot work :
- if no USB cuable is plugged, continue directly to
autoboot
- if an USB cable is plugged, wait for 3 seconds for
any input on the USB serial gadget, and if none
happens, continue to autoboot linux kernel
- else interrupt autoboot and interact on barebox
console
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Recent evolutions of linux kernel's drivers for docg3 chip,
ie. it's renaming for mtdparts option, is handled by this
patch.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This got broken while updating the iomux definitions from the
kernel. Since then the PMIC did not work anymore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The value already is set by calling gpio_direction_output.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ok, I assume this should go into separate series. It fits both S5PV210 and S3C6410.
This adds support for S3C and S5P architectures (all of my knowledge) to the
serial driver. Since the only difference between them is in clock handling,
this is moved to an arch-dependent separate function.
Most modern architectures should define S3C_UART_HAS_UBRDIVSLOT and S3C_UART_HAS_UINTM.
This adds support for most
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Juergen Beisewrt <kernel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Actually ISP1504 ULPI chip are installed on PCM970 development board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We currently use the environment variable 'bootargs' to get the
Linux bootargs. This patch allows for a more flexible bootargs
generation using global variables. With it the Linux bootargs
are concatenated from multiple variables. This allows to replace
parts of the bootargs string without having to reconstruct it
completely.
With this bootargs can be constructed like:
global linux.bootargs.base="console=ttyS0,115200"
global linux.bootargs.ip="ip=dhcp"
global linux.mtdparts="physmap-flash.0:512K(nor0.barebox),-(root)"
This will then automatically be combined into a kernel bootargs
string during boot.
If the 'linux.bootargs.' variables are all empty the old standard
'bootargs' way will be used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>