[ETSI TS 128 552 V16.9.0](https://www.etsi.org/deliver/etsi_ts/128500_128599/128552/16.09.00_60/ts_128552v160900p.pdf)
5.2.2 Registration procedure related measurements
SNSSAI labels are not provided.
- Number of registration requests received by the AMF is
exposed for each registration type.
```
fivegs_amffunction_rm_reginitreq 1
fivegs_amffunction_rm_regmobreq 0
fivegs_amffunction_rm_regperiodreq 0
fivegs_amffunction_rm_regemergreq 0
```
- Number of successful initial registrations at the AMF is
exposed for each registration type.
```
fivegs_amffunction_rm_reginitsucc 1
fivegs_amffunction_rm_regmobsucc 0
fivegs_amffunction_rm_regperiodsucc 0
fivegs_amffunction_rm_regemergsucc 0
```
- The existing counter of failed registrations at the AMF
is exposed separately for each registration type.
```
fivegs_amffunction_rm_reginitfail
fivegs_amffunction_rm_regmobfail
fivegs_amffunction_rm_regperiodfail
fivegs_amffunction_rm_regemergfail
```
5.2.5.2 Measurements for 5G paging
Number of 5G paging procedures initiated at the AMF:
```
fivegs_amffunction_mm_paging5greq 1
```
Number of successful 5G paging procedures initiated at the AMF:
```
fivegs_amffunction_mm_paging5gsucc 1
```
5.2.11 Authentication procedure related measurements
Number of authentication requests:
```
fivegs_amffunction_amf_authreq 2
```
Number of authentication rejections:
```
fivegs_amffunction_amf_authreject 1
```
Number of failed authentications due to parameter error:
```
fivegs_amffunction_amf_authfail{cause="21"} 1
```
5.2.8 UE Configuration Update procedure related measurements
Number of UE Configuration Update commands requested by the AMF:
```
fivegs_amffunction_mm_confupdate 2
```
Number of UE Configuration Update complete messages received by the AMF:
```
fivegs_amffunction_mm_confupdatesucc 1
```
* [pfcp] response_timeout should never call ogs_pfcp_xact_delete (#50)
* also remove ogs_pfcp_xact_delete since never called
* also had to catch one more ogs_pfcp_sendto()
---------
Co-authored-by: Spencer Sevilla <spencer@MacBook-Air.local>
TS33.401
7 Security procedures between UE and EPS access network elements
7.2 Handling of user-related keys in E-UTRAN
7.2.7 Key handling for the TAU procedure when registered in E-UTRAN
If the "active flag" is set in the TAU request message or
the MME chooses to establish radio bearers when there is pending downlink
UP data or pending downlink signalling, radio bearers will be established
as part of the TAU procedure and a KeNB derivation is necessary.
23.501 (5G NAS stage 2)
5.4.4.1:
"When the AMF receives Registration Request with the Registration type set
to Initial Registration or when it receives the first Registration Request
after E-UTRA/EPC Attach with Registration type set to Mobility Registration
Update, the AMF deletes the UE radio capability."
o TS24.301(4G/LTE)
5.5.1 Attach procedure
5.5.1.2 Attach procedure for EPS services
5.5.1.2.4 Attach accepted by the network
If the attach request is accepted by the network,
the MME shall delete the stored UE radio capability information
or the UE radio capability ID, if any.
o TS24.501(5G)
5.5.2 De-registration procedure
5.5.2.1 General
When the AMF enters the state 5GMM-DEREGISTERED for 3GPP access,
the AMF shall delete the stored UE radio capability information
or the UE radio capability ID, if any.
<nf>/init.c:<nf>_main() :
ogs_pollset_poll() receives the time of the expiration of next timer as
an argument. If this timeout is in very near future (1 millisecond),
and if there are multiple events that need to be processed by
ogs_pollset_poll(), these could take more than 1 millisecond for
processing, resulting in the timer already passed the expiration.
In case that another NF is under heavy load and responds to an SBI
request with some delay of a few seconds, it can happen that
ogs_pollset_poll() adds SBI responses to the event list for further
processing, then ogs_timer_mgr_expire() is called which will add an
additional event for timer expiration. When all events are processed
one-by-one, the SBI xact would get deleted twice in a row, resulting in
a crash.
0 __GI_abort () at ./stdlib/abort.c:107
1 0x00007f9de91693b1 in ?? () from /lib/x86_64-linux-gnu/libtalloc.so.2
2 0x00007f9de9a21745 in ogs_talloc_free (ptr=0x7f9d906c2c70, location=0x7f9de960bf41 "../lib/sbi/message.c:2423") at ../lib/core/ogs-memory.c:107
3 0x00007f9de95dbf31 in ogs_sbi_discovery_option_free (discovery_option=0x7f9d9090e670) at ../lib/sbi/message.c:2423
4 0x00007f9de95f7c47 in ogs_sbi_xact_remove (xact=0x7f9db630b630) at ../lib/sbi/context.c:1702
5 0x000055a482784846 in amf_state_operational (s=0x7f9d9488bbb0, e=0x7f9d90aecf20) at ../src/amf/amf-sm.c:604
6 0x00007f9de9a33cf0 in ogs_fsm_dispatch (fsm=0x7f9d9488bbb0, event=0x7f9d90aecf20) at ../lib/core/ogs-fsm.c:127
7 0x000055a48275b32e in amf_main (data=0x0) at ../src/amf/init.c:149
8 0x00007f9de9a249eb in thread_worker (arg=0x55a483d41d90) at ../lib/core/ogs-thread.c:67
9 0x00007f9de8fd2b43 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442
10 0x00007f9de9063bb4 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:100