Adds the loop_last option to res_musiconhold,
which allows the last audio file in the directory
to be looped perpetually once reached, rather than
circling back to the beginning again.
Resolves: #122
ASTERISK-30462
UserNote: The loop_last option in musiconhold.conf now
allows the last file in the directory to be looped once reached.
Currently, the presentation for incoming channels is
always available, because it is never actually set,
meaning the channel presentation can be nonsensical.
If the presentation from the incoming Caller ID spill
is private or unavailable, we now update the channel
presentation to reflect this.
Resolves: #120
ASTERISK-30333
ASTERISK-21741
Adds a new AMI action (CoreShowChannelMap) that takes in a channel name
and provides a list of all channels that are connected to that channel,
following local channel connections as well.
Resolves: #104
UserNote: New AMI action CoreShowChannelMap has been added.
A previous change, ASTERISK_29991, made it possible
to send additional Caller ID parameters that were
not previously supported.
This change adds support for analog DAHDI channels
to now be able to receive these parameters for
on-hook Caller ID, in order to enhance the usability
of CPE that support these parameters.
Resolves: #94
ASTERISK-30331
UserNote: Additional Caller ID properties are now supported on
incoming calls to FXS stations, namely the
redirecting reason and call qualifier.
Add new type 'sdp_label' when creating a bridge using the ARI. This will
add labels to the SDP for each stream, the label is set to the
corresponding channel id.
Resolves: #91
UserNote: When creating a bridge using the ARI the 'type' argument now
accepts a new value 'sdp_label' which will configure the bridge to add
labels for each stream in the SDP with the corresponding channel id.
* app_followme: fix issue with enable_callee_prompt=no
If the FollowMe option 'enable_callee_prompt' is set to 'no' then Asterisk
incorrectly sets a winner channel to the channel from which any control frame was read.
This fix sets the winner channel only to the answered channel.
Resolves: #87
ASTERISK-30326
When Asterisk is restarted it does not preserve paused reason for
members of realtime queues. This was fixed for non-realtime queues in
ASTERISK_25732
Resolves: #66
UpgradeNote: Add a new column to the queue_member table:
reason_paused VARCHAR(80) so the reason can be preserved.
UserNote: Make paused reason in realtime queues persist an
Asterisk restart. This was fixed for non-realtime
queues in ASTERISK_25732.
The Caller ID generation routine currently is hardcoded
to always use the system time zone. This makes it possible
to optionally specify any TZ-format time zone.
Resolves: #98
ASTERISK-30330
The Asterisk logrotate script contains explicit
references to files with the .log extension,
which are also included when *log is expanded.
This causes issues with newer versions of logrotate.
This fixes this by ensuring that a log file cannot
be referenced multiple times after expansion occurs.
Resolves: #96
ASTERISK-30442
Reported by: EN Barnett
Tested by: EN Barnett
This removes the dependency of the SLAStation and SLATrunk
applications on app_meetme, in anticipation of the imminent
removal of the deprecated app_meetme module.
The user interface for the SLA applications is exactly the
same, and in theory, users should not notice a difference.
However, the SLA applications now use ConfBridge under the
hood, rather than MeetMe, and they are now contained within
their own module.
Resolves: #50
ASTERISK-30309
UpgradeNote: The SLAStation and SLATrunk applications have been moved
from app_meetme to app_sla. If you are using these applications and have
autoload=no, you will need to explicitly load this module in modules.conf.
With this change, session modifications in the early media state are
possible if the SDP was sent reliably and confirmed by a PRACK. For
details, see RFC 6337, escpecially section 3.2.
Resolves: #73
The hidecallerid setting in chan_dahdi.conf currently
is broken for a couple reasons.
First, the actual code in sig_analog to "allow" or "block"
Caller ID depending on this setting improperly used
ast_set_callerid instead of updating the presentation.
This issue was mostly fixed in ASTERISK_29991, and that
fix is carried forward to this code as well.
Secondly, the hidecallerid setting is set on the DAHDI
pvt but not carried forward to the analog pvt properly.
This is because the chan_dahdi config loading code improperly
set permhidecallerid to permhidecallerid from the config file,
even though hidecallerid is what is actually set from the config
file. (This is done correctly for call waiting, a few lines above.)
This is fixed to read the proper value.
Thirdly, in sig_analog, hidecallerid is set to permhidecallerid
only on hangup. This can lead to potential security vulnerabilities
as an allowed Caller ID from an initial call can "leak" into subsequent
calls if no hangup occurs between them. This is fixed by setting
hidecallerid to permcallerid when calls begin, rather than when they end.
This also means we don't need to also set hidecallerid in chan_dahdi.c
when copying from the config, as we would have to otherwise.
Fourthly, sig_analog currently only allows dialing *67 or *82 if
that would actually toggle the presentation. A comment is added
clarifying that this behavior is okay.
Finally, a couple log messages are updated to be more accurate.
Resolves: #100
ASTERISK-30349 #close
Commit 09e989f972
categorized the T option as not being compatible
with remote consoles, but they do affect verbose
messages with remote console. This fixes this.
Resolves: #102
The existing res_pjsip_pubsub APIs are somewhat limited in
what they can do. This adds a few API extensions that make
it possible for PJSIP pubsub modules to implement richer
features than is currently possible.
* Allow pubsub modules to get a handle to pjsip_rx_data on subscription
* Allow pubsub modules to run a callback when a subscription is renewed
* Allow pubsub modules to run a callback for outgoing NOTIFYs, with
a handle to the tdata, so that modules can append their own headers
to the NOTIFYs
This change does not add any features directly, but makes possible
several new features that will be added in future changes.
Resolves: #81
ASTERISK-30485 #close
Master-Only: True
This enables the test to work with CC=clang.
Without this the test for 6 args would fail with:
utils.c:99:12: error: static declaration of 'gethostbyname_r' follows non-static declaration
static int gethostbyname_r (const char *name, struct hostent *ret, char *buf,
^
/usr/include/netdb.h:177:12: note: previous declaration is here
extern int gethostbyname_r (const char *__restrict __name,
^
Fixing the expected return type to int sorts this out.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Deprecate `ast_gethostbyname()` in favor of `ast_sockaddr_resolve()` and
`ast_sockaddr_resolve_first_af()`. `ast_gethostbyname()` has not been
used by any in-tree code since 2021.
This function will be removed entirely in Asterisk 23.
Resolves: #78
UpgradeNote: ast_gethostbyname() has been deprecated and will be removed
in Asterisk 23. New code should use `ast_sockaddr_resolve()` and
`ast_sockaddr_resolve_first_af()`.
If processing an XInclude results in new <xi:include> elements, we
need to run XInclude processing again. This continues until no
replacement occurs or an error is encountered.
There is a separate issue with dynamic strings (ast_str) that will be
addressed separately.
Resolves: #65
We should also return all codecs on an re-INVITE without SDP for a
call that used late offer (e.g. no SDP in the initial INVITE, SDP
in the ACK). Bugfix for feature introduced in ASTERISK-30193
(https://issues.asterisk.org/jira/browse/ASTERISK-30193)
Migration from previous gerrit change that was not merged.
The current AST_CEL_LOCAL_OPTIMIZE event is and has been
triggered on a local optimization end to serve as a flag
indicating the event occurred. This change adds a second
AST_CEL_LOCAL_OPTIMIZE_BEGIN event for further detail.
Resolves: #52
UpgradeNote: The existing AST_CEL_LOCAL_OPTIMIZE can continue
to be used as-is and the AST_CEL_LOCAL_OPTIMIZE_BEGIN event
can be ignored if desired.
UserNote: The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used
by itself or in conert with the existing
AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion.
* Remove .gitreview and switch to pulling the main asterisk branch
version from configure.ac instead.
* Replace references to JIRA with GitHub.
* Other minor cleanup found along the way.
Resolves: #39
When using mediasec, requests sent after a 401 must still contain the
Security-Client header according to
draft-dawes-sipcore-mediasec-parameter.
Resolves: #48
ast_waitstream was not called after ast_streamfile,
resulting in "o'clock" being skipped in French.
Additionally, the minute announcements should be
feminine.
Reported-by: Danny Lloyd
Resolves: #41
ASTERISK-30488
Currently, both pulse and tone dialing are always enabled
on all FXS lines, with no way of disabling one or the other.
In some circumstances, it is desirable or necessary to
disable one of these, and this behavior can be problematic.
A new "dialmode" option is added which allows setting the
methods to support on a per channel basis for FXS (FXO
signalled lines). The four options are "both", "pulse",
"dtmf"/"tone", and "none".
Additionally, integration with the CHANNEL function is
added so that this setting can be updated for a channel
during a call.
Resolves: #35
ASTERISK-29992
UserNote: A "dialmode" option has been added which allows
specifying, on a per-channel basis, what methods of
subscriber dialing (pulse and/or tone) are permitted.
Additionally, this can be changed on a channel
at any point during a call using the CHANNEL
function.