sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
u-boot/arch/arm
History
Heiko Stübner 3e747197b1 rockchip: rk3188: Add sdram driver 
The sdram controller blocks are very similar to the rk3288 in utilizing
memory scheduler, Designware uPCTL and Designware PUBL blocks, only
limited to one bank instead of two.

There are some minimal differences when setting up the ram, so it gets
a separate driver for the rk3188 but reuses the driver structs, as there
is no need to define the same again.

More optimization can happen when the modelling of the controller parts
in the dts actually follow the hardware layout hopefully at some point
in the future.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
 		2017-03-16 16:03:45 -06:00
..
cpu armv7m: Add SysTick timer driver 2017-03-14 20:40:18 -04:00
dts rockchip: rk3188: Add core devicetree files 2017-03-16 16:03:45 -06:00
imx-common Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs 2017-03-09 11:37:24 -05:00
include rockchip: rk3188: Add sdram driver 2017-03-16 16:03:45 -06:00
lib do_smhload: fix return code 2017-03-09 19:52:14 -05:00
mach-aspeed dm: core: Replace of_offset with accessor 2017-02-08 06:12:14 -07:00
mach-at91 Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig 2017-01-25 17:38:32 -05:00
mach-bcm283x ARM: bcm283x: Implement EFI RTS reset_system 2016-11-28 20:15:19 -05:00
mach-davinci Kconfig: Migrate BOARD_LATE_INIT to a select 2017-01-24 10:35:54 -05:00
mach-exynos ARM: Migrate errata to Kconfig 2017-03-09 19:52:50 -05:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-integrator integrator: switch to DM serial port 2015-08-12 20:47:49 -04:00
mach-keystone ARM: K2G: DDR3: Fix up priv ID for MPU 2016-12-03 13:21:10 -05:00
mach-kirkwood Kconfig: Migrate BOARD_LATE_INIT to a select 2017-01-24 10:35:54 -05:00
mach-meson arm: Disable HVC PSCI calls by default 2016-10-18 09:08:08 +02:00
mach-mvebu arm: mvebu: Implement secure boot 2017-02-01 09:04:18 +01:00
mach-omap2 arm: omap3: Bring back ARM errata workaround 725233 2017-03-14 20:40:17 -04:00
mach-orion5x Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
mach-rmobile armv8: aarch64: Fix the warning about x1-x3 nonzero issue 2017-01-18 09:29:33 -08:00
mach-rockchip rockchip: rk3188: Add sdram driver 2017-03-16 16:03:45 -06:00
mach-s5pc1xx arm: s5pc1xx: move SoC to mach-s5pc1xx 2015-11-30 17:17:01 +09:00
mach-snapdragon drivers/sysreset: group sysreset drivers 2016-08-12 09:22:17 -04:00
mach-socfpga SPL: add support to boot from a partition type 2017-02-17 14:15:14 -05:00
mach-sti board: Add STMicroelectronics STiH410-B2260 support 2017-03-14 20:40:21 -04:00
mach-stm32 ARM: SPI: stm32: add stm32f746 qspi driver 2017-01-28 14:04:50 -05:00
mach-sunxi sunxi: A64: enable SPL 2017-01-04 16:37:43 +01:00
mach-tegra ARM: Migrate errata to Kconfig 2017-03-09 19:52:50 -05:00
mach-uniphier ARM: uniphier: set DRAM_SPARSE flag for LD21 boards 2017-03-14 04:15:24 +09:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq mmc: zynq: rename CONFIG_ZYNQ_SDHCI to CONFIG_MMC_SDHCI_ZYNQ 2017-01-31 21:50:47 +09:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
Kconfig STiH410: Add STi SDHCI driver 2017-03-14 20:40:20 -04:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2017-02-01 16:34:25 -05:00
config.mk ARMv8: Add secure sections for PSCI text and data 2016-12-15 11:57:25 -08:00