Harald Welte
cc45ecae11
udhcpd.conf: Provide DNS server IP for BTSs
...
If we don't provide a DNS server via DHCP to the BTSs, then their
ntpdate will not succeed in contacting pool.ntp.org (resolver failure),
which in turn means they have the wrong date, which again in turn leads
to failing opkg update or openvpn certificate verification failures.
2014-05-19 18:53:25 +02:00
Harald Welte
08e4e4c26a
sysmocom-backup: Include udhcpd.conf
...
... as some customers might have customer specific DHCP adresses/ranges
2014-05-19 18:51:30 +02:00
Harald Welte
c4956c65a3
sysmocom-backup: Include /etc/lcr for lcr config files in backup
...
This is needed on all systems where we have customer-specific lcr
configuration.
2014-05-19 18:49:02 +02:00
Harald Welte
f9697c1e24
osmo-bts: update git to call osmobts-mgr with config file
2014-05-19 13:04:11 +02:00
Harald Welte
6dbc14b02c
osmo-bts: Make sure to install osmobts-mgr.cfg
2014-05-19 12:59:32 +02:00
Harald Welte
30caceef90
osmo-bts: Update to current master for CMR in AMR support
2014-05-19 11:39:52 +02:00
c63ba210da
gpsd: Address warning by bitbake about -dev package
...
The .pc files were already covered by the normal -dev package
glob. No need to do more work here.
Addresses:
WARNING: Variable key FILES_${PN}-dev (${includedir} ${FILES_SOLIBSDEV} ${libdir}/*.la ${libdir}/*.o ${libdir}/pkgconfig ${datadir}/pkgconfig ${datadir}/aclocal ${base_libdir}/*.o ${libdir}/${BPN}/*.la ${base_libdir}/*.la) replaces original key FILES_gpsd-dev ( ${libdir}/pkgconfdir/libgpsd.pc ${libdir}/pkgconfdir/libgps.pc).
2014-05-18 10:50:03 +02:00
b3c600a368
sysmobts: Fix up the targeting of the 3.10.40 kernel
2014-05-18 10:47:57 +02:00
bb18e3152b
linux-sysmocom: Rebae and target latest stable version
2014-05-16 14:19:25 +02:00
3213964e17
linux-sysmocom: Enable SMP support for sysmocom-bsc
...
The new sysmocomNITB product is using a SMP capable system that
is needed for some more transcoding power. Enable SMP in the
kernel.
2014-05-16 14:18:55 +02:00
6f02ca5575
sysmocom-bsc: Run olddefconfig on a 3.10.40 kernel
2014-05-16 14:16:22 +02:00
7aeb916ea1
sysmocom-backup: Backup a new opkg config file for starterkits
...
We make the configuration packages for starterkit customers
available in a feed. Backup this feed configuration.
Fixes: SYS#365
2014-05-16 11:51:44 +02:00
d88a758c4e
sysmocom-backup: add the systemd-files for bsc, nitb and sgsn to backup when enabled
...
Fixes: SYS#261
2014-04-29 20:11:13 +02:00
22cb9fef1d
init-install.sh: do not rename the network devices after the new kernel/udev scheme
...
Fixes: SYS#75
2014-04-29 16:52:13 +02:00
1638def65e
sysmocom-bsc-image: add kernel-module-nls-iso8859-1 and kernel-module-nls-cp437 and disable LINGUAS
...
Fixes: SYS#75
2014-04-29 16:52:04 +02:00
8ac540640d
osmo-bts: Upgrade osmo-bts to fix a stupid handover issue
2014-04-19 19:38:35 +02:00
b0fa1e06d6
Merge remote-tracking branch 'hheinold/bsc-grub-image-install'
...
These provide us with a nice way to provision/install the BSCs
with grub. This way we can easily upgrade the kernel on the BSC
as well. It is a fix for SYS#75.
2014-04-08 18:09:29 +02:00
076f6e1bb0
init-install.sh: resize the install partition
2014-04-08 18:06:51 +02:00
45929766a9
core-image-minimal-initramfs: append the image to install charset deps for the vfat kernel modul
2014-04-08 18:06:51 +02:00
4433c53b76
initramfs: modify init-install to install our bsc image
...
Fixes: partly SYS#75
2014-04-08 18:06:27 +02:00
8f46ba7045
busybox: Enable dnsd on all the builds
...
Specially for the sysmobsc it can come in handy to have a DNS
server that will return some static addresses.
2014-04-04 13:09:05 +02:00
e06fa2ac4d
linux-sysmocom/sysmocom-bsc: enable EHCI_HCD to get USB 2.0 support
2014-04-01 19:19:48 +02:00
475b32b3fe
u-boot: Fix the deployment of symlinks and install SPL/MLO
2014-03-29 13:20:00 +01:00
6b4cc713b6
linux-sysmocom: Enable CGROUPS for the sysmocom-odu
2014-03-29 11:27:53 +01:00
f23a2cbd9a
sysmocom-odu: Fix the u-boot and linux recipe
...
While the kernel resides in a dedicated kernel partition we will
still install the uImage. For u-boot we just want it to be installed.
2014-03-29 10:50:04 +01:00
4b1f68ae33
cifs-utils: Move it to the extras like the other extras
2014-03-29 00:17:17 +01:00
e2853d21b5
cifs-utils: Add recipe based on the 5.x recipe of meta-networking
2014-03-28 22:32:35 +01:00
d9ebe05799
u-boot: Add something that could build for the sysmocom-odu
...
We do not intend to use u-boot right now but at least this
version will build. In the first version we will use the
barebox images provided to us by the producer of the SoM.
2014-03-28 21:56:27 +01:00
2700d6a642
u-boot: Start to use spaces instead of tabs to follow OE
2014-03-28 21:55:45 +01:00
5e84042d37
u-boot: Use PV/PR again as PKGV/PKGR didn't fix the AUTOINC in the filename
2014-03-28 21:55:04 +01:00
b008109769
linux-sysmocom: We require bc-native for kernel compilation now
2014-03-28 21:36:34 +01:00
575be79d5a
osmo-bts: Fix the AGCH through PCU socket message
2014-03-27 18:13:21 +01:00
318f4e4e52
osmo-bts: Update with max_power_red fixes and apply it
...
This is fixing max_power_reduction for revC hardware and applies
a new max_power_reduction when it arrives through OML and the
system is already initialized.
2014-03-27 07:57:45 +01:00
c5e607febc
sysmocom-bsc-ip-image-directdisk: do not rename the ethernet interfaces to the new scheme
...
Fixes: SYS#277
2014-03-23 23:08:30 +01:00
c872ce4a46
osmo-bts: Provide the direct PCU mode for the image
2014-03-21 19:28:59 +01:00
599e2d3679
systemd: Update osmo-bts/osmo-pcu recipes for newer service files
...
Some smaller other fixes in the osmo-pcu code
2014-03-21 19:13:23 +01:00
5b1ebe6a26
linux-sysmocom: Local hacks to have NAT/MASQ on 3.2 and 3.10 kernels
...
The name/structure of the NAT configuration was changed. Catch up
and put the new names into the old defconfig too. It is an ugly hack
to have it work with v3.2 and v3.10 kernels. The sysmobsc has been
fixed independently.
2014-03-21 19:13:23 +01:00
e797a8ac6b
sysmobts-firmware: Make the firmware conflict with older bts software
...
We had an upgrade issue where using newer firmware with older
osmo-bts binaries didn't work. Make sure that the shiny new 0.4.0
binaries are used with firmware starting from 3.2.
Addresses: #158
2014-03-21 16:52:30 +01:00
7c453471f1
osmo-pcu: Bump version number and requirements as well
...
The interface has not knowingly changed but it is good to
have comparable versions installed.
2014-03-21 16:52:30 +01:00
9ae58a33bf
osmo-bts: Upgrade the version number to 0.4.0
2014-03-21 16:52:29 +01:00
1b769147bd
sysmocom-odu: We want things to be packaed as uImage (do we?)
2014-03-13 17:08:17 +01:00
46098bb42e
osmo-pcu: Re-build with some cosmetic and logging changes
...
Make finding use after free more easy and change some log
regions to help in detecting what is going on.
2014-03-13 17:08:11 +01:00
ce642cba53
osmo-bts: Build newer version with handover, agch and manager changes
2014-03-13 17:08:08 +01:00
2ba19d8e54
femtobts-api: Build the latest git of the header files
2014-03-13 16:48:03 +01:00
2fa4a818c7
Merge branch 'hheinold/systemd-images'
2014-03-11 18:34:52 +01:00
36d4e0119a
sysmocom-bsc-image: enable osmo-bsc for sysvinit or systemd
2014-03-11 18:34:43 +01:00
72ce4c5203
sysmocom-nitb-image: enable nitb for sysvinit or systemd
2014-03-11 18:34:43 +01:00
4a9cc7acdb
systemd_sysmocom.inc: disable flushing of journald too
...
* bump INC_PR
Fixes: SYS#262
2014-03-11 18:30:55 +01:00
305426f7cf
Merge remote-tracking branch 'hheinold/dora-kernel-bsc-upgrade'
2014-03-11 18:30:04 +01:00
6f469116e1
sysmocom-bsc-ip-image-directdisk: switch from ext3 to ext4 filesystem
2014-03-11 18:17:51 +01:00
Harald Welte
Holger Hans Peter Freyther
Henning Heinold