Having:
osmo-bts requires sysmobts-firmware > 3.11
sysmobts-firmware requires osmo-bts > 0.4.2
is something opkg can't resolve in one go. One needs two calls to
the opkg command to end up with a fully upgraded version. Make sure
that we require/pull newer firmware when installing a new version
of osmo-bts.
* Add sysmobts-firmware 3.11. The firmware will work with the
previous osmo-bts software and this one (as we don't use the
new primitives)
* Build newer version of osmo-bts with support for online
calibration and CMR fixes.
Build a version of barebox that has support for NAND flash and
ubifs. Load the kernel from the device. One needs to flash the
*mlo*.img into the xloader partitions and the other image into
the barebox partition.
erase /dev/nand0.xload.bb
erase /dev/nand0.xload_backup1.bb
erase /dev/nand0.xload_backup2.bb
erase /dev/nand0.xload_backup3.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload_backup1.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload_backup2.bb
cp /mnt/mmc0.0/MLO /dev/nand0.xload_backup3.bb
This doesn't work like this. We need to know the _exact_ PV/PR
of the package and we don't. Specially with the PR server in dora
and later we can not know the version.
This reverts commit 767d7b6939.
This upgrades the firmware from 3.6 to 3.10. This is a significant
firmware upgrade and it changed ABIs too. Try hard to fix the
dependencies as much as possible. This requires the DSP headers
files to be of version 3.10 as well but we can not have versioned
DEPENDS.
The code has not been finished and doesn't meet the quality
standards we have for a product. Comment the sysmobts-mgr
related files that will be back soon.
Let's flash multiple copies of UBL and U-Boot to cope better with
NAND bits flipping in these sectors. To fit multiple copies of
U-Boot into the flash we had to move the rootfs a bit to the end.
Daniel noticed that on upgrade his /etc/osmocom/osmo-bts.cfg
was overwritten. This was due the addition of the sysmobts-mgr
config file and using an assignment instead of an append.
We do not intend to use u-boot right now but at least this
version will build. In the first version we will use the
barebox images provided to us by the producer of the SoM.
This is fixing max_power_reduction for revC hardware and applies
a new max_power_reduction when it arrives through OML and the
system is already initialized.
We had an upgrade issue where using newer firmware with older
osmo-bts binaries didn't work. Make sure that the shiny new 0.4.0
binaries are used with firmware starting from 3.2.
Addresses: #158
Use the native systemd service file to avoid running a shell script
that is ran from within the screen. This code expects the pcu to have
a .service file itself.
sbts2050-util is a small binary-only userspace program used to
interface with the sysmoBTS 2050 board management controller,
i.e. to enable/disable PA power, read power consumption/temperature
and the like.
This tool is going to disappear once the respective features have been
included in the (open source) sysmobts-util / sysmobts-mgr. Please be
patient meanwhile.
The build differs in that it doesn't use a getty on ttyS0. In the fuutre,
a modified kernel serial driver as well as a 2050-specific utility
for managing the supervisor processor will follow.
This is a osmo-bts that will use libosmo-abis for OML and RSL and
is based on master. In one way it should improve quality in another
it is also testing.
This is a bigger update and brings the SAPI queue, readv/writev
and realtime scheduling to the sysmobts software. This will greatly
improve the stability of the software under load.
Install the sysmobts firmware headers on top of the Osmocom toolchain.
This way the SDK can be used to re-compile both the OpenBSC and the
osmo-bts software.
Make sure the -dev package of the femtobts-api has not runtime
dependencies to a library that does not exist.
The name will be resolved to the hash during parse time. This will
not work when not having access to the internet. Use the sha1 sum
to make offline builds work.
* Fix the link timeout handling as found in post-review.
* Fix the set bts attr parsing due a funny parsing error.
* Sleep 10 seconds after the execution, reload DSP and FPGA firmware
This will include
* Fix of CHAN_NR IEI in common channel RSL messages generated by BTS
* zecke/request_queueing
* Improve shutdown of DSP on exit
* various calib updates
* GSMTAP: use RxLevel and RxQual
* DSP power control bypass on ul_power_target==0
* Add radio link timeout procedure
The latest release currently does not support the RevC hardware. Install
both 3.0.1pre and 3.1 (luckily ubifs compresses them) and set a symlink.
Use the EEPROM size as an indicator if we are on revD or revC hardware
and then set the symlink. It has been tested for revC and needs to be tested
on revD hardware.