When in VariableParse, use the expand_cache if possible rather than looking
up data. Ultimately it would come from the same place but this short cuts
a heavily used code block for speed improvements.
(Bitbake rev: f682b8b83d21d576160bac8dc57c4c989b4dc555)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debugging showed the variable expansion regexp was catching python
expressions (starting with @). Since these are caught by their own
dedicated regexp, stop matching these for the plain variable expansion
for small performance improvements.
(Bitbake rev: c630d564285f55f9db10c18269bd310df797430e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All the values we need are already guaranteed to be in the lookupcache
so rather than fetch variables again, just use the cache. This gives a
small performance improvement and simplifies the code.
(Bitbake rev: 8ffaba61da7f195d7c3b64dce35b6a56272aecae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The if statement current causes the size of parent to be calcuated which
is like a len() operation on a datastore. Since we're only interested
whether the value is none, checking explictly for this gives a
small performance gain.
(Bitbake rev: 43a245bde318545ea75ca4ce7894395c1cf9b32a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean-up to avoid duplication and promote code reuse to factor
taskdata creation into a common function.
[RP: minor tweaks]
(Bitbake rev: 468c221449290c4f196e87f7d8e23fcd7db86135)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding a runQueueTaskSkipped to notify that the tasks that are not
run either because they are set-scened or they don't need an update
(timestamp was ok).
(Bitbake rev: cf4a0c7aa82090876ae652b611acfab3ce2688f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add the path to the logfile for all Task events except TaskInvalid
so that we can trace back the logfile locations at some future point.
TaskInvalid doesn't ever have a logfile.
(Bitbake rev: 8344d84c609446f59f9619cc7ca0d693b7e2bbd6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Exiting from the server is antisocial, instead we should raise an exception. This
will correctly fail the current command and reset the server state. We use
the handled exception since for these conditions to occur, something was
already displayed to the user.
(Bitbake rev: dacc94bcace85a2e95aee2dccd8e680c59e4545f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only display a CommandFailed ERROR: message if there is an error to display.
Only display an errors summary if we actually displayed errors.
(Bitbake rev: 568ea00acd226d48e725bb01d4f8c410ed1eaa61)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Empty messages should trigger CommandFailed, not CommandCompleted as
otherwise the exit code will be incorrect.
(Bitbake rev: 70a8ead31f9ffc987d9c6db61a926f7a9af8f8b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After running a command on the server, it needs to reset to the initial
state. This ensures that subsequent clients start from a known state
and notice any configuration changes.
Ultimately we may want to do more than this buts a good start and better
than nothing.
(Bitbake rev: dd15648fc2654b8d7c3e00ea7ab3dbf04f24f24b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The shutdown state causes the server to finish what its doing, stop was
them meant to completely stop it. It doesn't mean the server is stopped
though. Renaming the current stop event for forceshutdown gives more
meaning to what it actually does. The stopped namespace then becomes
available to indicate a completely stopped server.
(Bitbake rev: 12e9d33bfae5294e3870dfd1202f63383ad05e92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the cooker event data isn't rebuilt upon reset and the cache
configuration cannot be changed after init. These are both bad things
and this patch refactors the init/reset code so that it is possible
to reconfigure the server.
(Bitbake rev: 1193b8d76fcb6cb87e9ec135a2514370d7dd90ac)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This call only ever happens in cooker context now so we can drop the
nasty worker check from here.
(Bitbake rev: bc0b30199a8e3624c5b9914430adbcc7c6bd4497)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBakeUIEventServer is an unused class that pushes UI
events over a separate thread.
The current version of XMLRPC server works just fine with
the classic UI event handlers, so this class is not needed.
(Bitbake rev: 8e8e17631d790271b1be747c4b45059ec38ab606)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake wasn't reparsing when _remove items were added to its configuration
and equally, appends/prepends were also being badly tracked. This
change enrures these variables are accounted for in the configuration
hash.
[YOCTO #5172]
(Bitbake rev: 62914f9208ef2427a34daa523af857f4027900eb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_PRESERVE_ENV wasn't working since data.inheritFromOS wasn't getting a
correct list of keys to import into the data store. This fixes
things so it does add all environment variables into the data store
when BB_PRESERVE_ENV is used.
(Bitbake rev: 843e9339c5ee3c99657a40a0e2c7dbd777b6ef06)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding an event to be fired when a scene task is completed.
It is analogous to the run task completed event, and has
been missing for some reason.
(Bitbake rev: 73b8f4d3fbeaf1b330a66d76012d0a5cef8dbe2d)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be an race issue if we:
$ bitbake make-3.81 make-3.82
This because they are being built at the same time which would cause
unexpected problems, for example:
[snip]
ERROR: Package already staged (/path/to/tmp/sstate-control/manifest-qemux86-make.populate-sysroot)?!
ERROR: Function failed: sstate_task_postfunc
[snip]
Or there would be python's strack trace such as:
[snip]
*** 0004: mfile = open(manifest)
0005: entries = mfile.readlines()
0006: mfile.close()
0007:
0008: for entry in entries:
Exception: IOError: [Errno 2] No such file or directory: xxx
[snip]
[YOCTO #5094]
We can quit earlier to avoid this kind of issue when two versions of the same PN
are going to be built since this isn't supported.
(Bitbake rev: ab377c00c33a2d296bfda1b0b6c2a62b29d1004f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The runtime provider debug message is the same as the build time debug
message, make them different would be better.
[YOCTO #5067]
(Bitbake rev: 92b624cbc2711d3d859994099fb63918dfd0031a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In exclusive mode, we need to complete the transaction for writes to make
it to the database. Therefore add sync calls to ensure this happens.
Autocommit mode is significantly (100 times) slower so caching the
data is of significant benefit.
(Bitbake rev: 4e55f7821786a59c2cd7dbd8bfa2a22f5f196e99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 00ca441614695b4261d8d4f31b7ef0e3e3784282
Merge: 8cc367d bb88c0f
Author: Christopher Larson <kergoth@gmail.com>
Date: Thu Aug 22 16:42:42 2013 -0700
Merge pull request #6 from staticshock/multi-line-strings
Remove "keepend" and "excludenl" directives
commit bb88c0fd4ad2b7b9c8c4c73def2b3cb20c473ac3
Author: Anton Backer <olegov@gmail.com>
Date: Sat Jul 13 01:24:15 2013 -0400
Remove "keepend" and "excludenl" directives
It looks like these were never actually used correctly, and were doing
more harm than good. "keepend" on bbString, for instance, prevented
proper nesting of ${@python} in strings. Similarly, a balanced pair of
{ } braces inside a shell function would force the function to terminate
early if the closing brace was on its own line.
So far I've seen absolutely no negative consequences from removing
these, but a bunch of positive consequences.
Fixes#1
commit 8cc367d01f4c699be5fcc072de59e6f2f14a138b
Merge: c58628c eec6b7f
Author: Christopher Larson <kergoth@gmail.com>
Date: Thu Aug 22 09:46:46 2013 -0700
Merge pull request #4 from staticshock/function-names
Parse function names with nested vars
commit c58628ca517cd25985361fc0d27863521cc28a5d
Merge: dfb0f7c a890982
Author: Christopher Larson <kergoth@gmail.com>
Date: Thu Aug 22 09:43:40 2013 -0700
Merge pull request #5 from yoyko/master
syntax: python expansion (${@...}) inside shell functions
commit a890982b7c33a6e363b12d6cb69e22b4bbc0f317
Author: Jozef Šiška <yoyo@ksp.sk>
Date: Thu Aug 22 13:20:45 2013 +0200
syntax: python expansion (${@...}) inside shell functions
Signed-off-by: Jozef Šiška <jsiska@nuvotechnologies.com>
commit eec6b7f6f0472787929f424968f9a0d78ac4af08
Author: Anton Backer <olegov@gmail.com>
Date: Fri Jul 12 22:16:01 2013 -0400
Parse function names with nested vars
For instance, pkg_postinst_${PN}
Fixes#3
commit dfb0f7c0d51556448cba79b474b8c19b9cded9af
Author: Christopher Larson <chris_larson@mentor.com>
Date: Fri Jun 1 18:57:13 2012 -0400
syntax: add ?= flag def
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
commit 589a62a00709ca822a42327e7086008aba2d9933
Author: Christopher Larson <kergoth@gmail.com>
Date: Fri Dec 9 22:25:47 2011 -0700
ftplugin: set commentstring
Signed-off-by: Christopher Larson <kergoth@gmail.com>
commit 7ffc80b3fb4ddf68cc5a69bdc63ab03d70c44f87
Author: Chris Larson <chris_larson@mentor.com>
Date: Thu Jun 2 15:27:48 2011 -0700
Handle +=/=+ for flags
Signed-off-by: Chris Larson <chris_larson@mentor.com>
(Bitbake rev: f5f479bbe9b74622cd54c8d6ba8786661a3ae3e6)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When displaying larger number of events the client can get caught up in displaying
the footer, then immediately overwriting it. To avoid this, wait for pauses
in the event stream before displaying the footer to give a slightly more
friendly feel to the UI.
(Bitbake rev: 5d706c7cd6ee8d83b67ff18312d4c8119bea8878)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the worker split the ${DATE} and ${TIME} variables could end up
with different values for different workers.
E.g., a task like do_rootfs that is run within a fakeroot environment
had a slightly different view of the time than another task that was not
fakerooted which made it impossible to correctly refer to the image
generated by do_rootfs from the other task.
(Bitbake rev: 756cc69ebf8bfe8455d0c90f288dd51be2499773)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Selected custom image recipes should be cleared from the combo the moment
you change your selection. The idea is to always perform the selection of
those images in the same way (i.e through the "Select from my image
recipes" option).
[YOCTO #5001]
(Bitbake rev: 94483ee5ae9f4051bccd660c4718c36564e17161)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Newer versions of git do not have the '-' concatenated command
(Bitbake rev: 7adb05978b917e624016bae1700db23bd280b41a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
DISTRO_FEATURES_remove = "opengl" wasn't working as expected. The reason
turned out the be the indirect reference to opengl and the fact _remove was
operating on unexpanded data.
This patch rearranges some code to ensure we operate on expanded data
by moving the expand cache handing into getVarFlags instead of getVar.
(Bitbake rev: 181899bd9665f74f8d1b22d2453616ad30d26d9e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before saving the packages for a custom images in a .bb file,
the packages were saved in bitbake memory. Now all the variables
are saved in conf file, so saving PACKAGE_INSTALL is not needed anymore.
Moved were LINGUAS_INSTALL is set, because both conditions are for testing
if a custom image is saved.
[YOCTO #5101]
(Bitbake rev: 8757f962b92e7668f40d2d8bd9e762b152f91f7b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUILDNAME is set from cooker by default, so since the worker split it
will not be set when executing functions. In OpenEmbedded this results
in /etc/version (which is populated from BUILDNAME) not having any
content. Pass this variable value through to the worker explicitly to
fix the issue.
Fixes [YOCTO #4818].
(Bitbake rev: 92940b0427d9b2b3f95e27c230ec1e36638a34bc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cookerdata.findconfigFile method has a new parameter. Changed some calls.
(Bitbake rev: dce0f9d4afe0986e2dd0146944fc4ac9dde275e4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was missed off in a previous patch.
(Bitbake rev: ad7664edd40fa46e6f6fec2144403e3b6fc3a639)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the server only expects a single client to connect (i.e.
no bind parameter set, so there is no way for the
clients to get the server port), stop the server after
the first client exits.
(Bitbake rev: eb6bae56f62082bf147045311154cbae4bca0f4c)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the threading mixin class resulted in large amounts of memory
being used by the PR server for no good reason. Using a receiver thread
and a thread to do the actual database operations on a single connection
gives the same performance with a much saner memory overhead so
switch to this.
(Bitbake rev: e08455d5f3b8e96765942b9c3b9767c30650557d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the basename of the .bb file is not unique, for example xxx-native
and xxx can overwrite each other. If this happens whilst running, you can
get odd backtraces as one file is parsed as another tries to write out
new data.
Avoid issues by using PN for the output filename instead.
(Bitbake rev: c9534f8e59d44b885334607ed90a3be2e492ec69)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we don't support using multiple servers on the same database file,
don't use the BEGIN/COMMIT syntax and allow writes to the database
to work ~100 times faster with no transaction locking.
(Bitbake rev: 42144a54979658f93fbbb43f7e271c1fff4d88ff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only support one server using the database at a time so take an exclusive
lock and avoid later lock overhead.
(Bitbake rev: e3e39be6f2d063858c92971ce8ccd89c95d4f26d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the database is locked we will get an immediate error indicating so,
there is no retry timeout. The looping code is therefore useless, the loop
count is near instantly exceeded.
Using a time based retry means we can wait a sensible time, then gracefully
exit.
(Bitbake rev: 9f9e6d87007ea87e62495705464f4232c996a165)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing backend server implementations were inefficient since they
were sleeping for the full length of the timeouts rather than being woken when
there was data ready for them. It was assumed they would wake and perhaps did
when we forked processes directory but that is no longer the case.
This updates both the process and xmlrpc backends to wait using select(). This
does mean we need to pass the file descriptors to wait on from the internals
who know which these file descriptors are but this is a logical improvement.
Tests of a pathaolgical load on the process server of ~420 rapid tasks
executed on a server with BB_NUMBER_THREAD=48 went from a wall clock
measurement of the overall command execution time of 75s to a much more
reasonable 24s.
(Bitbake rev: 9bee497960889d9baa0a4284d79a384b18a8e826)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Try and avoid errors like "ERROR: database table is locked: PRMAIN_nohist"
by retrying if we see the string "is locked".
(Bitbake rev: 1a175b51f80d13f747b653d29e9c0d2201b5109c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a better value that the earlier infinite timeout yet still
allows for servers with high loads. It does mean the bitbake process
can hang at exit for the timeout period but that should never happen
and only happened for me in some test cases which wouldn't happen
in normal use.
(Bitbake rev: ab8d926b9bc27c58011e7db9327e031ac76ba34b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It should be possible to run a build anywhere on the filesystem and have
bitbake find the correct build directory if its set somehow. The BBPATH
variable makes perfect sense for this usage. Therefore use any available
value of BBPATH to search for conf/bblayers.conf before walking the parent
directory structure.
This restores the option of being able to run bitbake from anywhere if
the user has set things up to operate in that environment.
(Bitbake rev: e86336b3fe245bc97fe74c9b9d6a21d38a536fb7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By definition, bblayers.conf is at the top of the build tree. We'd like
to support running bitbake anywhere within that build tree but TOPDIR
gets set to wherever cwd is. Change the code to reset TOPDIR
to the top of the build directory.
This shouldn't break anything but does make the system more usable.
(Bitbake rev: b266db27de0bba19a418e4d42e870649136b116b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the PR server multithreaded and able to handle multiple connections
at once which means its no longer a build bottle neck when serving one connection
at a time. I've experimented and database connection for each thread seems to
cause the least issues, pushing the contention for sqllite to handle itself.
This means moving the db/table connection code into the actual function methods.
It doesn't abstract well as a function since we need the db object around for
the lifetime of the function as well as the table else we lose the connection.
(Bitbake rev: bf9be2029b2bded5f532bdda4c38ae3dff5d1cf6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enabling threading for the PRServer causes a number of issues. Firstly is
the obtuse error:
sqlite3.InterfaceError: Error binding parameter 0 - probably unsupported type
which is due to the class not being derived from object. See:
http://docs.python.org/2/library/sqlite3.html#registering-an-adapter-callable
Secondly, we want to enable multithreadded access to the database so we do this
when we open it. This opens the way up to multithreading the PR server.
(Bitbake rev: 5709efc2ff1e36529bd28f49cd093ccfa7abff7f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 972bc43e6d5b1207b944b3baa8f9805adb35dda7 (serv.py: Fix hang
when spawned dynamically with bitbake) introduced a regression,
because the wrong patch was submitted. The syntax was incorrect in
the original patch. The logger iterator must be used with a call to
getLogger().
[YOCTO #5059]
(Bitbake rev: 85fed8acc3af3e15bf119db2f51c486a9de3646b)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is more idiomatic, and from the limited performance testing I did, is
faster as well. See https://gist.github.com/kergoth/6360248 for the naive
benchmark.
(Bitbake rev: 1aa49226d5a2bac911feeb90e3d9f19529bc1a3e)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PRServer has the possibility to hang indefinitely blocking on a
semaphore processing a xmlrpc request to send an event back to the
main bitbake instance. This was observed during a "bitbake -e" on a
heavily loaded machine and the main bitbake instance and cooker exited
before the PRServer emitted its first log.
The stack trace is provided below as to show what happens every time a
logger.info() is executed in the PRServer. Not only does it write to
the stream handler but it also tries to send the event to the main
event processor.
self._notempty.acquire()
self.queue.put(event)
_ui_handlers[h].event.send(event)
fire_ui_handlers(event, d)
fire(record, None)
self.emit(record)
hdlr.handle(record)
self.callHandlers(record)
self.handle(record)
self._log(INFO, msg, args, **kwargs)
(self.dbfile, self.host, self.port, str(os.getpid())))
self.work_forever()
pid = self.daemonize()
self.prserv.start()
singleton.start()
self.prhost = prserv.serv.auto_start(self.data)
cooker.pre_serve()
bb.cooker.server_main(self.cooker, self.main)
self.run()
code = process_obj._bootstrap()
self._popen = Popen(self)
self.serverImpl.start()
server.detach()
server = start_server(servermodule, configParams, configuration)
ret = main()
It was never intended for the PRServer to send its logs anywhere but
its own log file. The event processing is an artifact of how the
PRServer was forked and it inherits the event log handlers. The
simple fix is to clean up and purge all the log handlers after the
fork() but before doing any of the typical PRServer work or logging.
(Bitbake rev: 972bc43e6d5b1207b944b3baa8f9805adb35dda7)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an image from scratch is selected, and recipes parsing
is canceled, the image shown by the combo box isn't correct.
[YOCTO #5000]
(Bitbake rev: f8166ace0bd9155199166990ce15da24eb2e793b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create the _evt_list for hob; it is longer than the knotty
uses because it handles more events.
(Bitbake rev: 715aed74f972bb6e9b6a5130ca9ede48d4f79f0a)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default for the mask will be * (all the handlers)
(Bitbake rev: 4c95e5f46cf2a656100bbf5a0e5a09d506abf9b9)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
updateCache handles the logic for shutting down the parsing so we need
to call it for all cases when we're not running.
This fixes hangs if Ctrl+C is pressed during parsing.
(Bitbake rev: 552b8935dd2f9f11e8d5c08a597a7e966b891480)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are long standing complaints about the fact its very difficult
to remove a portion of a variable. The immediate request is for a -=
and =- operator. The trouble is that += and =+ are "immediate"
operators and are applied straight away. Most people would expect
-= and =- to be deferred to have the effect most people desire and
therefore implementing -= and =- would just make the situation more
confusing.
This deferred operation is much more similar to the override syntax
which happens at data store finalisation. The _remove operator is
therefore in keeping with the _append and _prepend operations.
This code is loosely based on a patch from Peter Seebach although it
has been rewritten to be simpler, more efficient and avoid some
potential bugs.
The code currently only works on space delimited variables, which
are by far the most commom type. If bitbake is ehanced to support
types natively in future, we can adjust this code to adapt to that.
(Bitbake rev: 9c91948e10df278dad4832487fa56888cd58d187)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add functionality to allow UIs to update and change the types of events they
recieve. To do this we need to add a new command and also need to be able
to obtain the current event hander ID. In the case of xmlrpc, this is
straightforward, in the case of the process server we need to save the result
in a multiprocessing.Value() so we can retrive it. An excplit command
was added to the server API to facilitate this.
The same function can also be used to mask or unmask specific log messages,
allowing the UI to optionally differ from the standard set of message
filtering.
Based upon work by Cristiana Voicu <cristiana.voicu@intel.com>
(Bitbake rev: ba5a6c88785d9889d4172ec79937ac2a5555327e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The standard python socket connect has long timouts which make sense for remote
connections but not local things like the PR Service. This adds a timeout
parameter to the common xmlrpc server creation function and sets it to a more
reasonable 5 seconds.
Making the PR server instantly exit is a good way to test the effect of this
on bitbake.
We can remove the bodged timeout in the PRServer terminate function which
has the side effect of affecting global scope.
(Bitbake rev: 8c01cff94787abbb64fbdf0c16cd63f8f97a7e03)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out we have a number of different ways the process server termination can
hang. If we call cancel_join_thread() on the event queue, it means that it can be left
containing partial data. This means the reading of the event queue in the terminate()
function can hang, the timeout and block parameters to Queue.get() don't make any
difference.
Equally, if we don't call cancel_join_thread(), the join_thread in terminate()
will hang giving a different deadlock.
The best solution I could find is to loop over the process is_alive() after requesting
it stops, trying to join the thread and if that fails, try and flush the event
queue again.
It wasn't clear what difference a force option should make in this case, we're
gracefully trying to empty queues and shut down regardless of whether its a SIGTERM
so I've simply removed the force option.
(Bitbake rev: c5c8f33ca4b81877a0115887849881001b745bf0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolve_file was behaving different when relative and absolute
paths were passed to it
* include relative-path/non-existent-file.inc
works correctly resolve_file throws IOError, BBHandler.py:handle()
doesn't catch it, ConfHandler.py:include() catches IOError and shows:
DEBUG: CONF file 'relative-path/non-existent-file.inc' not found
* include /absolute-path/non-existent-file.inc
was failing, because resolve_file just returns fn,
BBHandler.py:handle() calls bb.parse.mark_dependency(d, abs_fn)
which throws:
OSError: [Errno 2] No such file or directory: '/absolute-path/non-existent-file.inc'
and parsing fails.
Ad isfile() test for absolute fn and throw IOError to make
resolve_file behavior consistent for both paths.
* I know we had some issues with -b relative-path-to-recipe.bb and
absolute path, so consider this patch only as RFC and documentation of
this problem
* Catch OSError too in ConfHandler.py:include() e.g. in case the file exists, but user
cannot read it or something like that.
(Bitbake rev: b0bbd89a4f0b98fa1ab28b8e0526cd9ddb76fa57)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle spotted there were pid files being left around. This patch
fixes things so the removal function is called correctly, the code
contained a typo.
(Bitbake rev: c696a16c8200c31c52750037eeafe07e065b6517)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently one of the bigger bottlenecks in bitbake is passing all the
log messages over IPC to the UI. This is worthwhile if the UI is going
to use them, pointless otherwise. The memory resident bitbake suffers
from this performance issue particularly badly.
This patch filters the log events on the server side with the global
log levels and hence reduces the traffic. This speeds up parsing
(18.5s down to 17s) and bitbake general command overhead is reduced
(7.3s for a NOP to 6.2s).
What isn't added here is general event filtering or the ability to
change the log levels once set. Provision is made for adding this
in a follow up patch though.
(Bitbake rev: 1bf0e88f57ba0bca62532e81d0d62cf88e2abcbb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'courtesy' symlink for log.do_xxx are quite useful when debugging, so
with this commit, we now get similar 'courtesy' symlink for run.do_xxx
scripts.
We only create symlink for tasks, not individual functions.
The symlink is create right before the actual runfile is created, indeed
we cannot create the symlink right after running the task since a failure
or execption can happen, in which case the symlink wouldn't be created,
and symlink are particularely useful when the task failed!
Another option would be create the symlink after the runfile is created,
and before the script is executed, but that means we need to duplicate the
code in case of Shell vs Python task.
(Bitbake rev: a672b39c5d529ba85d72eee8fef4c4273eaa5397)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some cases when a new machine is selected, the image combo
shows the same option. Fixed this issue, because the image
combo box should be reseted.
Fix the counter for the options in the combobox. This bug
was introduced by the templates functionality. The combo box had some
last changes, and I forgot about this counter.
[YOCTO #4858 & #5000]
(Bitbake rev: 457fd80ee6b1b2bcef463e3a83e048da2f8bf805)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some cases, the length of the description and the brought
in by field was too big. That led to the size of the property
dialog exceeding Hob's size. For long tooltips we use
scrollable windows now.
[HOB #4321]
(Bitbake rev: 78ecabf19bf01e5a662b6e2b865cd93bf47d962b)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running scripts with 'set -e' produces silent failures with no
diagnostic. Add an exit handler which produces diagnostics, including
details of what was running if the shell seems to be bash.
(Bitbake rev: e213e6a4c297a4f1c22eed15bd7b4cbc0e9eab4f)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some labels needed to be changed in order to respect the convention.
[YOCTO #4999]
(Bitbake rev: 110b485eac6adea242297b7942da8710403c465a)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Assuming there is no known reason why an item is not provided, show
close matches on the assumption that it might have been a typo or
other mistake.
(Bitbake rev: ed81b0856b4a3892b53d39871eaaa6273390ea75)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Help to pick up mistakes such as "bitbake -c cleanstate xyz" (instead
of "bitbake -c cleansstate xyz".)
(Bitbake rev: 15c3db1cffdffd85641c6b12e77f19ce7a553472)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should have been part of 'hob: implement the "retrieve image dialog" +
changes to image combo box' but got lost in the merge process. This adds
the missing file.
(Bitbake rev: 0eadcc073f270c0b323955cf7719b77195cf4890)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Place the "Create your own image recipe" field to the
end of the image recipes list.
[YOCTO #4193]
(Bitbake rev: 288bbda31164efffd07a370a728a7682db775c08)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob retrieves the list of recipes and packages using the IMAGE_INSTALL
variable, so a custom image should be saved using this variable.
Changed how the image is saved in a bb file
[YOCTO #4193]
(Bitbake rev: edf3f52c05d86d49b71770cdafde583213e2034d)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tha changes related to the image combo box are related to the
action done in the retrieveImageDialog. When the user wants to select
a customize image, but then he cancels the action, the combo box is set to
--select a base image--.
If the user selects an image using the new dialog, a new item with its name
is added to the combo box list and then it is activated.
[YOCTO #4193]
(Bitbake rev: f25322de7e47719b31808397174e5c4f6d8649f2)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The entire file name (with the path) is needed to know
if the image is located in the "build" directory or it comes
from layers. According to this information, the image is placed
differently in the combobox.
[YOCTO #4193]
(Bitbake rev: 7d15eccc25b6c96851e4d01401f9f9b7821730b1)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added an item for the custom images.
Added a separator in the combo box.
[YOCTO #4193]
(Bitbake rev: 1eed84c11269c25c13bb444871d84c5dfeabcb73)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saving an image that requires another image will cause issues when
the second on is removed. So, we have agreed to "require" only the images
from layers.
The functionality is implemented in bitbake, in order to be more abstract,
and it is used by Hob when an image recipe is saved.
[YOCTO #4193]
(Bitbake rev: 28296ca78507ba2e414eb136c81afee65a8e25e5)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also, the image can be saved when the a name is filled.
[YOCTO #4193]
(Bitbake rev: 0edad0ab3ccd165125726d2aa3dfeb19dad246c9)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The image name and description should be saved for a future
save.
[YOCTO #4193]
(Bitbake rev: 6dc0fc243ac6046714523d08df4d8f88c48698cc)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was necessary to append ${TOPDIR}/recipes/images to BBFILES.
Implemented the mechanism to append a value to a variable: a command and
the method in cooker.
[YOCTO #4193]
(Bitbake rev: 4aedbee90bd92395c2460a68702e6ede00e256c9)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the image name to the list model, in order to show the image name as
the user named it.
[YOCTO #4193]
(Bitbake rev: 0aba493103d1fe50026a47db16529febbbbd77a2)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an new image is saved, the dialog for this action has
a field for the description. Changed how an image is saved, by
appending the DESCRIPTION variable at the end of the .bb file.
[YOCTO #4193]
(Bitbake rev: 5629007f2b984005e3a8ac5d9b71422cbc2f1409)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified generateNewImage function from cooker, in order to be used to
save a template in Hob.
Created a command to ensure that some dirs are created. The templates
(recipes) will be saved in {TOPDIR}/recipes/images folder.
Called these methods from Hob.
[YOCTO #4193]
(Bitbake rev: 96ffa00945c7eb09a0132fa47159aef3ef20fb3e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented a new dialog used by Hob. This dialog was desinged
in order to permit to save only in a particular directory.
Also, it has a field where the user can type a description
for the image.
Implemented in the handler a method to retrieve the topdir variable,
because the changes will be saved in {topdir}/recipes/images directory.
[YOCTO #4193]
(Bitbake rev: 117d4809a62e28ffe7e9dcda5433993d76f7d934)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the design document for templates in Hob was created, we've noticed
that some labels need to change.
[YOCTO #4193]
(Bitbake rev: fcbadbb73a8a94a3d5e330e1a5fa9550130d2c62)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On the "Edit packages list" page, the image size may be computed before
building. We didn't find another way to give a more accurate size, so
we have agreed to inform the user that this an estimated size.
[YOCTO #4388]
(Bitbake rev: 136eda2dcbc32aba4f59783049352dc1375cc945)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to be easier for the user to understand, we have changed the
toolchain labels to sdk.
[YOCTO #3808]
(Bitbake rev: 008afbcf6b1b315eb5463ecfb39fc50e6303687e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake-worker makes use of the signal module
but it doesn't import it. This patch fixes the issue.
[YOCTO #4750]
(Bitbake rev: c2ed639690f135994199eb24d964e37f57259e3a)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a file ends with .xz, it currently gets overwritten during unpack:
The decompress command for .xz files is:
'xz -dc %s > %s' % (file, efile)
and as efile == file, we end up overwriting file (the source).
Fix this by adding .xz to the list of suffixes that that need to
be removed from a file name for an extract command, leaving the
bare file name. Now, for a given file foo.xz,
file == foo.xz and efile == foo, similar to how .gz .bz2 and .Z
files are treated.
(Bitbake rev: 2cd2d0a48e12ab4358fb967eaf7a56c17993f48d)
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a warning if 'bitbake -C' is executed with a task that does not
exist.
Fixes [YOCTO #4877]
(Bitbake rev: 6459c1d0eb8f1007246df36149e2496ee531e25f)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now the split made searching the string "file://", but
this is not ok when SSTATE_VARIABLE has the following form:
SSTATE_MIRRORS ?= "\
file://.* http://someserver.tld/share/sstate/PATH \n \
file://.* file:///some/local/dir/sstate/PATH"
In the documentation I've found that \n is the list separator.
[YOCTO #4857]
(Bitbake rev: 73bcd96928cb2df390e1fc6d3a8b7ce3e9d546a4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't know the dynamic pacakge's name exactly, there might be a
problem, for example, when we use:
IMAGE_INSTALL_append += "ncurses-lib12344"
The ncurses-lib12344 matches ncurses' dynamic packages pattern:
PACKAGES_DYNAMIC = "^${PN}-lib.*"
so there is no errors before the rootfs creation though there is no
ncurses-lib12344.
We can warn this, but I think that we'd better not since there are many
dynamic packages, or there would be too many warnings, for example, the
perl and kernel modules, maybe we can print a debug message for it.
[YOCTO #4798]
(Bitbake rev: df372ca057f0c8c2152223b3e26ad9a30958bab6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modal dialogs doesn't run on the main loop so they cannot
catch any signal from the terminal. This patch makes sure
the dialogs are destroyed when a SIGINT is sent to HOB.
[YOCTO #3329]
(Bitbake rev: 6eee0cc37438cc3f91531b7df524330fba27161b)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The method was removed when the process for saving configuration
in Hob was changed. Replace the call with the right function.
[YOCTO #4793]
(Bitbake rev: b6aa2b63d71cbe82850a375381b2dbc750cf1905)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If BBPATH isn't set and bblayers.conf isn't found, improve the message
shown to the user to help their understanding of what the problem might
be.
[YOCTO #3271]
(Bitbake rev: 0e639f5cbc813c8d4719019cfdd4287e9a429610)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A
[YOCTO #4772]
When path:file change to python function, it maybe include '@' character.
So, add the special character to change to '_' for avoid error.
(Bitbake rev: 684bc6dcb11ecb1fd7a4d25c08909ad9879e8342)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In this case, the comment is appended to the end of the file.
Some text editors, do not place a '\n' to the end of the file
after saving it.
[YOCTO #4636]
(Bitbake rev: 2beb9589b1bd9773f587b4dc08afdfe50f4ea913)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(aka pay the cookie monster for weak defaults)
If you have code like:
MYVAR = "a"
MYVAR_override ??= "b"
then MYVAR will get the value "a" even when override is in OVERRIDES. The
reason is that the value of ??= is set as a flag not a value and the cookie
monster isn't paid.
The fix is to ensure appropriate payment is made for a defaultval varflag
matching the usual setVar case.
(Bitbake rev: 3d8044bc79c482c5ea008ddf12a8128dcd1527ee)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if the flags set against a variable in the base data store
change, it doesn't automatically trigger a reparse when it really
should. For example with the blacklist class setting:
PNBLACKLIST[qemu] = "bar"
PNBLACKLIST[bash] = "foo"
will not trigger a reparse if only one entry is changed and a
blacklisted recipe can still be built.
I did consider using BB_SIGNATURE_EXCLUDE_FLAGS in here however it
doesn't make sense, we want to trigger a reparse when any of the
flags change too (which is different to the sstate signatures which
we wouldn't want to change in those cases).
[YOCTO #4627]
(Bitbake rev: ed74ea50043f6feb698c891e571feda2b9f8513d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now the variables were saved in bitbake configuration,
now they are saved in configuration files, in order to be read by
bitbake-worker. This helps to assure the consistency for the rest
of the variables.
(Bitbake rev: ea65ebf43525f173205183aa2fd5d8db303ffd4a)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the cooker initialization is called, the variables history is lost.
It need a reset, in order to load the configuration files.
Also, concatenated the value for INHERIT variable.
(Bitbake rev: 2b8c0c09e09ab69edc53501b84050c797f0686e4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As it is implemented now, when parsing the configuration files is
needed, it also needs an initialization.
Also, implemented a function to create an extra configuration files
which can be used as postfile/prefiles when parsing.
(Bitbake rev: 5fe23c1b51da14f58f8c483f43f30b48766a0913)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we reset, the current tracking value may change unexpectedly. This
patch ensures that the default value is preserved over a datastore reset.
(Bitbake rev: 0aa27598d9fdc8c3d18839b3ef93d0ba9698f761)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up a number of old style accesses to the datastore.
(Bitbake rev: d872fef2c38749c3c6f5d84344db3ec2f9f134ce)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command for reparse does nothing, so I have managed to remove it,
because it can be misleading. When a reparse is needed, it can be used
the parse function.
(Bitbake rev: 188eaba121789112ffeb1188f0984d23dfe8df4f)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds a new command to create an extra configuration
file, in order to create it from Hob.
Also, it calls the enable/disable data tracking when needed.
Modified the prefiles and postfiles variables because the cooker
expects some lists.
(Bitbake rev: 92393701adcfa181a1090e3632bc6df7ee7852e6)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now, some configuration settings was saved in a hob specific
directory. From now on, it will be saved in conf directory through bitbake.
(Bitbake rev: c53e902b010d1c3f1550f7e60e744f40120f73c2)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_NO_NETWORK can be set by bitbake internally by the use of
BB_FETCH_PREMIRRORONLY so update the error message to give users a
hint about this.
[YOCTO #3222]
(Bitbake rev: cac3060d0bf8c7deeacda18d06d92787911380d0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, tasks like fetchall are slightly broken since if a recipe
has specific [depends] which occur after do_fetch and add items not listed
in DEPENDS and RDEPENDS, they are not caught by recrdeptask. We've gone
around in circles on this issue (e.g
http://git.yoctoproject.org/cgit.cgi/poky/commit/bitbake/lib/bb/runqueue.py?id=5fa6036d49ed7befe6ad50ec95c61a50aec48195
) and in many cases the behaviour of recrdepends is correct but tasks like
fetchall need the other behaviour.
To address this we add a recideptask flag which can be used in conjuction
with the recrdeptask flag to specify which task to to the inspection upon.
This means entries like do_rootfs[depends] which have do_fetch tasks are
caught and run.
I'm not 100% happy with needing another flag but I don't see any rational
way to get the correct behaviour in all cases without it.
[YOCTO #4597]
(Bitbake rev: f8c9b292b02ce2c28741b74901205f5e5807ca87)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change allows bitbake to connect to a remote server
by reading the BBSERVER environment variable and effecting
the config. Basically a shortcut to the command line parameters.
(Bitbake rev: 81929f86c57ed0a4ad0cda7aaa820fceabaa61e9)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I add an option to terminate a remote server gracefully
as not to need a kill command.
(Bitbake rev: 7495f835666a9561c2c7d84da7aaa74e4df55b9a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I add an observer only mode for the knotty UI and
the XMLRPC server that will allow the UI to register
a callback with a server in order to receive events.
The observer-UI is able to send read-only commands to the
server, and also is able to register as an event handler.
Read-only commands are the commands that do not change
the state of the server and have been marked as such in
the command module.
The observer can switch to a full client if it calls addClient
at any time, and the server has no other client running.
(Bitbake rev: 4de9ee21f1fa4d04937cc7430fb1fc8b7a8f61e2)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Interestingly the previous version comparision was broken and we were always using
the compatibility code, masking this bug. Oops.
(Bitbake rev: d48e8bcb24e8fa5d4fd60fd2c9927a95976d8d8b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now we've moved to require python 2.7.3, we can jettison the compatibility
workarounds/hacks for older python versions.
(Bitbake rev: a51c402304f2080a76720f9b31d6dfdbed393bba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a setscene task has a hard dependency on a task like pseudo-native, its
expected that the setscene task will not run unless the dependency is met.
This adds code to ensure that is the case, otherwise a bug would show up
with a usecase like:
bitbake gnome-common
bitbake pseudo-native -c cleansstate
bitbake gnome-common -c clean
bitbake gnome-common
With the double wrapper script environment, we'd not see issues like
this as it would be masked. The problem theoretically affects code like
useradd too as well as anything using a sstate postinstall.
(Bitbake rev: c54e738e2b5dc0d8e6fd8e93b284ed96e7a83051)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
XMLRPC API ran a XMLRPC server at port+2 in order
to provide endpoints to register an event server
in which to dump the events.
This is no longer used, so we remove it.
(Bitbake rev: e171a363913a86e56266f4c9d107110c7f5221e3)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a flag to event handlers which lists the events a given handler wishes to
process. By default event handlers recieve all events but this means
we can stop running code in many cases if we know it doesn't want the event.
This is part of the fix for YOCTO #3812, but implements filtering only
for class event handlers; the other part (events filter for UIs) will be
the subject of a different patch.
(Bitbake rev: 074003a4e7530a72863b9c685fc5c31b0f08c039)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the change to bitbake-worker we need to ensure the workers know
how to contact the PR service, the magic 0 port and singleton is
no longer enough.
(Bitbake rev: c761751e259bb8e940552a28794b45887b5a72d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're going to need a fakeroot/pseudo version of the worker so
abstract the code to start the worker process.
(Bitbake rev: b5d0f12f9df3ab211700473ed145ee6fbd9ca8e9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The worker was being executed by each execution queue so would get
constructed twice for each build. This is wasteful so move execution
to the main runqueue so we only have to start the worker once.
(Bitbake rev: 8117f8480125b121b2b5ac0afc31b108d9e670ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a pretty fundamental change to the way bitbake operates. It
splits out the task execution part of runqueue into a completely
separately exec'd process called bitbake-worker.
This means that the separate process has to build its own datastore and
that configuration needs to be passed from the cooker over to the
bitbake worker process.
Known issues:
* Hob is broken with this patch since it writes to the configuration
and that configuration isn't preserved in bitbake-worker.
* We create a worker for setscene, then a new worker for the main task
execution. This is wasteful but shouldn't be hard to fix.
* We probably send too much data over to bitbake-worker, need to
see if we can streamline it.
These are issues which will be followed up in subsequent patches.
This patch sets the groundwork for the removal of the double bitbake
execution for psuedo which will be in a follow on patch.
(Bitbake rev: b2e26f1db28d74f2dd9df8ab4ed3b472503b9a5c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
AUTOINC was meant to appear once at the start of the version string.
The list of names may not be sorted meaning it could get inserted in
the middle. This patch simplifies the code and ensures it appears at
the start.
Include cache version bump to ensure the cache picks up these changes.
(Bitbake rev: ad8bf10d873abb94d987860a3f6d06b134fb8a99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Go through the cached list of file checksums and check if any of the
files no longer exist; if any are missing then invalidate the cached
recipe, which will force it to be reparsed and thus force the list of
files to be collected again. This prevents a warning when moving a file
to a different location that is still picked up by the recipe, e.g.
moving a file from a "files" subdirectory to one named with the recipe
name (${BPN}).
Fixes [YOCTO #4474].
(Bitbake rev: e1aa103593c46612c4d9000524174983b5994dc9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The reasons for combining these objects is ancient history, it makes
sense to clean things up and separate them out now. This follows on
logically from the configuration cleansups and leads well into the
bitbake-worker changes.
(Bitbake rev: 89ffd62661ebcf2a97ce0c8dfd5e4d5bfbe27de7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two fixes in bitbake related to running remote servers -
* can now specify correctly the bind port
* the information in print conforms to common server infrastructure
(Bitbake rev: b657208ee15ae065e5fcc2dd6e0051e03d246727)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch enables the XMLRPC server to remain
resident in memory after a task is run, and to accept
a new controlling client. To check the server after
task completion, do
lsof bitbake.lock
in the build directory. Kill the server with kill.
(Bitbake rev: e823e1f0675ff3794eb39ef0b4df2d7a220f4013)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In an attempt to minimize code duplication, create
clear interfaces, and maximize code reuse through OOP,
bb.server adds base classes for the BitBakeServer,
BitBakeServerConnection and actual server implementations
instructed in particular server types.
These classes document the minimum interfaces that the
derived classes must implement, and provide boilerplate code.
Changes to None, Process and XMLRPC servers as to use
the common server infrastructure.
(Bitbake rev: 6db4a64cef20f8d0aba804db4c4e1eec7b112b46)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added distroy signal to information dialogs
so that when pressing the close button,
the dialog would close.
[HOB #4568]
(Bitbake rev: 265e27857d1d8914486b924d3390bfbe88f4e39b)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some apparently debugging was left in in a previous commit. This caused
bitbake to return a list of bbappends when things changed from the cache.
Make this a proper debug message.
(Bitbake rev: 1965e5cbdfede18d7b7cb0218e0a5147c3f1c884)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added code in XMLRPC server that creates a stub local server
for a client-only connection and is able to connect to
a remote server, and receive events from the remote server.
Added the option to start a client with a remote server in
bitbake.
Original code by Bogdan Marinescu <bogdan.a.marinescu@intel.com>
(Bitbake rev: 25b2af76104d5aaf6435de8c158e0407512f97ce)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to be able to identify different clients over a
stateless XMLRPC connection, we add a custom header named
Bitbake-token, which identifies each client.
We refactor the rest of the code to use the new transport.
Based on a patch by Bogdan Marinescu <bogdan.a.marinescu@intel.com>
(Bitbake rev: a00c2186bffe848a7cedf31969b904f8f7322ae6)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a code sanitization targeted at making further
server-related changes easier (launch a server
separately or creating a mockup-server) to do.
(Bitbake rev: eac00258d213137ef73aed255c92b7981e2f1c75)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The collection of the extra caching data should not
be performed by the cooker, but supplied to it.
This patch will also streamline the code for launching servers
without a UI attached.
Based on a patch by Bogdan Marinescu <bogdan.a.marinescu@intel.com>
(Bitbake rev: f0b54280a6bce522508e4741e5f507bc284113a8)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Slight change in bitbake as to retrieve the entire UI module
for further processing instead of just the main function.
Based on a patch by Bogdan Marinescu <bogdan.a.marinescu@intel.com>
(Bitbake rev: f49341a9599d971829ef65b2b02732543740a3c9)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the removal of the none server type, we can remove the launchUI
method and simplify the code slightly.
(Bitbake rev: 9bef2f2dd0bcaa59528ebcb3c1ce053b7dff1ec6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The process server backend has been serving well as the default for a long
time now and the UI model is much better thought out that it used to be. With
the move to make bitbake a memory resident process, the none server is now
looking rather pointless and complicates the code needlessly. Lets therefore
now remove it.
(Bitbake rev: 9af03a89605e3db9bce3cea1e0f2d0b6cfaa6fe1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init function call was clobbering data hob relies on injecting, fix
this so the data injected by hob isn't overwritten.
(Bitbake rev: 64ca1aa1fd5f0473196b6cd805637fa644a92173)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "see xxx for further information" is misleading since it is just
the same information. Clarify just to mention the that this is the location
of the logfile without any empty promise.
[YOCTO #4343]
(Bitbake rev: 7088c0e8553dd3c408b5bc06f8c34d5b72e9ea9a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the show-appends and flatten subcommands for recent refactoring in
cooker.
[YOCTO #4536]
[YOCTO #4535]
(Bitbake rev: 54817d0de667941ee68fe3490684159e2d90e9c5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally it seemed like a good idea to keep the parameters around. Having
seen this in real life use, its incorrect, we should pull all the data we need
into the cooker's configuguration and then use this to build the datastore.
Being able to just build the datastore from the parameters seemed like a good
idea but having a dummy cooker configuration object is now looking like
the better option.
This also fixes failures in hob since the parseFiles command can call
into cooker directly now and reset the configuration prefiles and postfiles
at will, rather than the indirect calls before which were breaking the datastore
(e.g. BBPATH wasn't set).
The cleanup this allows in tinfoil illustrates how this change makes more sense.
(Bitbake rev: f50df5b891bf318f12fc61c74adfcc626cc6f836)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The assignment to True was missing from the code, well spotted Saul!
(Bitbake rev: e493fe8cb4953935f01361ffc0240e5818ebb283)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similarly to the execution context changes, establish better lifetime
management API of the class event handlers.
(Bitbake rev: 54e35a6cceead9521f8b1dacd48e55064e85c8bd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current execution context management for bitbake is ugly and the
use of a global variable is nasty. Fixing that is hard, however we
can improve things to start to establish an API for accessing
and changing that context.
This patch also adds in an explicit reset of the context when we reparse
the configuration data which starts to improve the lifecycle of the data
in setups like hob.
(Bitbake rev: 6c3281a140125337fc75783973485e16785d05a1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These have long since been deprecated, lets remove them.
(Bitbake rev: 3dc83bbb1bf387bb7ecea2e17f0f72cfccecba92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its confusing when an event handler in for example a bbclass receives
events for a recipe which doesn't use the class. This is due to the
class event handlers having confusing scope. Worse, the issue is not
deterministic and the events a handler will see depends on the parse
order.
To avoid these issues, remove the class event handler global scope
and only have class handlers recieve events for recipes using the
class.
(Bitbake rev: 7fb95f3d133e440d463d2faa7151c731f8e1ae96)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a global method scope confuses users and with the introduction
of parallel parsing, its not even possible to correctly detect conflicting
functions. Rather than try and fix that, its simpler to retire the global
method scope and restrict functions to those locations they're defined
within. This is more what users actually expect too.
If we remove the global function scope, the need for methodpool is reduced
to the point we may as well retire it. There is some small loss of caching
of parsed functions but timing measurements so the impact to be neglibile
in the overall parsing time.
(Bitbake rev: 4d50690489ee8dc329a9b0c7bc4ceb29b71e95e9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When this error occurs, the build should stop, not continue uninterrupted.
[YOCTO #4460]
(Bitbake rev: acd6d7ffa8813b3b11cad9145e8e614a695ae04a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After a recipe/package is deselected, the table is sorted as before the
fadeout animation.
[YOCTO #4453]
(Bitbake rev: d4968eac539f777367ab1243a1049117cb261176)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-applied a fade out mechanism for deselctiong on all the tabs of
recipes and packages list page
-set cursor on the package/recipe when it is included(important
when the its place is changing; like when the tree si order by
included tab)
[YOCTO #4342]
(Bitbake rev: 8bd0e0681a6a39c00accbfc0041ab248993f3877)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We use this externally in the OE layer index update script, so it
shouldn't really be named as an internal function.
(Bitbake rev: 89332a7874e94c8d91ea24200f9739abb1a50397)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the code here for recent changes to the initialisation of
configuration objects for cooker.
(Bitbake rev: 9d3ca9aa73a448b0594f03ac8e8317403ec0dc8d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
calc_bbfile_priority is now in CookerCollectFiles which can be accessed
on the collection attribute of a cooker instance.
Fixes [YOCTO #4513].
(Bitbake rev: 5d941631ad7198737d9a5c5a920a9062fa0431f8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means the variables show up in the shell execution "run" files since
its useful to know what the fakeroot environment is and how to set it up
manually.
(Bitbake rev: bdf437747b664479acde6deaa9096e2a6bcdf483)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the code stands today its hard to know which configuration variables
are used by which parts of the system. Some are used by the UIs, some
by bin/bitbake itself, some by cooker.
This patch changes the configuration to just contain the variables cooker
uses, and changes bin/bitbake to access the variables it needs directly
which hopefully lets us start to untangle this mess.
(Bitbake rev: e57497a24b6157c92519a34accd66035a39ad1f8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to have a memory resident bitbake and to allow task execution, we need
to be able to rebuild the base configuration without a cooker. This moves the
code into its own class so it can be built independently.
The interface is less than ideal here but I didn't want to add parsing methods
a subclassed DataSmart, at least until we've experimented further with this code
and are certain that makes sense. At the very least, the methods are ugly and need
cleaning up. Spliting the code out seems to be the right thing to do though and
should unblock various activities on BitBake so I believe this code is a step in
the right direction.
Based on a patch from Alexandru Damian <alexandru.damian@intel.com>
(Bitbake rev: 22a0b3cf73d2689db0c118b37aa7492632f8b0a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building up a set of actions for the server is tricky since we depend upon the
commandline but fall back to values from the datastore. We should be able to build
a datastore without a commandline and vice versa. Ultimately the UI should send
the commands to the server.
This patch amounts to code rearranging, moving the heavy lifting to the UI, though
a helper in the configuration option. This will need further cleanup/tweaking but
this should be the only update needed to the UIs. The code now queries the server
for any missing data should it need to.
This code allows various knowledge of configuration variables to move to the UI side
only, partcularly pkgs_to_build but also all the command specifiers. It should also
be possible to move cmd eventually, I'm just unsure if any callers call the commands
expecting this to default to something sane right now.
(Bitbake rev: 2dbbb1d51dafd4451fef8fe16f095bcd4b8f1177)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the UI and server configuration is one big incestuous mess. To
start to untangle this we creater cookerdata, a new module which contains
various confiuration modules and the code for building the base datastore.
To start with we add a ConfigParameters() class which contains information
about both the commandline configuration and the original environment.
The CookerConfiguration class is created to contain the cooker.configuration
options. This means we can transfer new paramters to the server over something
like XMLRPC and then build a new configuration from these on the server.
Based on a patch from Alexandru Damian <alexandru.damian@intel.com>
(Bitbake rev: 35bd5997e8d8e74bc36019030cc10c560a8134f9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the internal event processing, this excepting handler usually raises an
Empty error, masking the underlying failure. Ensure the original exception is
raised.
(Bitbake rev: 7d548568a55adfe84a976f2a549995e42da1afef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The long srcrevs are mainly used or the workdir construction as well as
the package version. The long entries are hashes generated by the git fetcher
and other scms using a similar revision mechanism.
We need these to change when the package changes however collisions are
unlikely to happen within the domains we care about. The long revisions
have generated negative user feedback due to the use in path and file
names.
This patch therefore truncates the revisions to 10 characters maximum.
This should be safe in the contexts where these revisions are used as
the chances of spatially close collisions is very low (distant
collisions are not a major issue in the way we use these).
(Bitbake rev: 43a8319cda7fae37862dae323eeb24cb39ca21b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now we no longer try and provide increasing values from the fetcher,
we can simplify the function structure for the sortable_revision
pieces and move the AUTOINC handling directly into the function
which needs it, simplifying the code.
(Bitbake rev: fb068bee47bb1a06f02447daf16c2b2a79c03288)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we account of the top level function's vardeps but not
those of any subfunction. This would imply we'd have to manually
write the dependencies of all parent functions which would be crazy.
This patch adds the dependencies to fix the issue.
(Bitbake rev: 658008cc6a8acd5c1f26877c9444c96002db01e7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The skipIf decorator is unavailable under python 2.6 and finding a syntax
works there is hard. This patch does allow network tests under 2.6.
(Bitbake rev: 565b3e31e0226c6e193ee0b031bd5e7bef25591e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move various random imports to the start of the modules as cleanup
and avoid an import issue with bb.process on python 2.6.
(Bitbake rev: aed4adfbe3a591ca4f8e41fb763c9f961bf2e6d5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the fetch tests fail on python 2.6 since check_output
doesn't exist on this version of python. Use bb.process instead
to avoid this problem.
(Bitbake rev: a3637155e829e06bbfe50fb8753de3de7ee8c22e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Contains a small fix to the builder.py code
(a missing "self" in a variable assignment).
With this changes, "hob" can run with the XMLRPC backend:
$ hob -t xmlrpc
(Bitbake rev: 3497478f803986af32099ddd124c47df8e89f6da)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"status" is a relic of very early versions of bitbake, rename it to match what it now
means.
(Bitbake rev: db307fc68773868de2db614a061f51c5c6a90468)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
updateCache() gets called by command.py when needed and needs to be iterated
over. The calls in cooker.py are therefore just plain wrong/confusing now.
(Bitbake rev: 8b7c65bba466bb6773c56849074978ce2c956129)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its clear looking at the code the path argument has never been used and doesn't
work. Tweak the function to be a little more readable.
(Bitbake rev: d7047ceaf29b870ade3257e263e010f65aa8bc6e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Cooker class is too large and needs to be split up into different
functional units. Splitting out the collections code into its own class
seems like a good place to start to try and disentangle things.
(Bitbake rev: ca1fcbb6e214c155a05328779d3d326e10c5eac0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the shell lexer finds an unrecognized dollar token, the error
message should contain what kind of token it is having problems with.
(Bitbake rev: 1acb9c338018c612db519d2db823c66b567863b9)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After the image was build, update the image size in the packagelistpage.
[YOCTO #4388]
(Bitbake rev: 4d6d02e61b32d1d710c708774f08cc5e7764415d)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the "cancel" callback function for both recipes and packages
list page.
[YOCTO #4333]
(Bitbake rev: 05ebbaa2426716c6254c4a98872020d02d2944bd)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you search a string, there are 2 groups: recipes/packages starting
with that string, and the rest. These 2 groups are now sorted.
[YOCTO #4111]
(Bitbake rev: 8d2b2a1c97570d3c6b40727f1afa1db8c00882f9)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>