Since it is an LTS release, the final version string was not
"Ubuntu 12.04" but "Ubuntu 12.04 LTS", so use this when doing the tested
host distribution check.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2385]
The installer only searches for hd[ab] sd[ab]. Some newer BSPs have mmcblk
devices that should be used as the install target. These devices also have a
partition prefix (mmcblk0p1 instead of mmcblk01). As they are detected
asynchronously, it is necessary to add the rootwait kernel parameter to avoid
a race condition trying to mount the root device.
As BSPs like the FRI2 and the sys940x have mmc devices and will have a 1.2
release, we should push this to 1.2.1. The changes are perfectly contained and
easily verified.
Test for an mmcblk device and add the p partition prefix if necessary. Add the
rootwait kernel parameter when an mmcblk device is detected. Replace the series
of explicit umount commands with a single umount using a wildcard. This will
find all the partitions and will not try to unmount non-existant devices. Avoid
copy and paste errors by replacing /dev/${device}${pX} references with the
previously assigned rootfs, bootfs, and swap variables.
These changes have been tested on the FRI2 Sato image which installed to
/dev/mmcblk0 as well as the N450 Sato image which installed to /dev/sda. Both
were successful.
(From OE-Core rev: bf403680d72e360c7382f540ea25cfdcbe77b4e5)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now runs with dash and busybox' ash as well as with bash
(From OE-Core rev: 2b93ed90736ed08c25561e24343a5ef2b8f7dbef)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I do not have "[[", just "[". Be gentle to users of legacy-free setups,
also by using '=' instead of the double notation.
(From OE-Core rev: e96ba42a977f4c07aa196ce379ecd73e4ddc23c5)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The error message erroneously talked about TMPDIR.
Just use OE_TMPDIR everywhere to make the name of the variable obvious.
(From OE-Core rev: 7b633d0a4cf9aa05e6243974bab2b780c246f8ba)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Backported from 523df15bcc21e1749771cca757613f3520243b8e
as suggested by Khem.
* Original commit message:
If build system has those libraries installed
gcc configure will pick them up. We want
consistent builds so we disable them since we
do not (yet) support them
(From OE-Core rev: 9de1de7c2c4e9f5accb4dd082fe819a711defbfb)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Regular expression did not check for mips64
(From OE-Core rev: 945b817d381bdb68202982536daaaaff78ad5761)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some versions of the screen utility provided from the host OS vendor
write the socket directory to $HOME/.screen. When using a shared home
directory across many servers, one sets the SCREENDIR environment
variable to avoid collisions in the shared home directory. This
results in problems launching a devshell where it is not entirely
obvious what happened because the SCREENDIR environment variable
got stripped from the environment prior to setting up the screen
in detached mode.
Example:
% bitbake -c devshell busybox
# ...Please connect in another terminal with "screen -r devshell"
% screen -r devshell
There is no screen to be resumed matching devshell.
The temporary work around was to do something like:
sh -c "unset SCREENDIR; screen -r devshell"
This patch adds SCREENDIR to the white list to ensure screen
works properly on systems where a developer needs to use
the SCREENDIR with shared home directories.
(From OE-Core rev: 5568a8f5a1c65bae021b2e36d735d3153acc6d72)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This cleans up and/or corrects a few values from machine includes
for consistency with future toolchain sanity checks, and also adds
the TUNEVALID and TUNECONFLICTS to documentation.conf.
(From OE-Core rev: 6ffe53c721a80cf156b44f59b564f2e899c6af50)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds some basic unit testing for the codeparser and data store code. Many of
the actual test cases were taken from work by Chris Larson's OE-Signatures work but with
changes to adapt to the current bitbake APIs we need to test.
I also imported CoW tests written by Holger Freyther from the original bitbake-test
codebase: http://svn.berlios.de/wsvn/bitbake/trunk/bitbake-tests/tests/ and
some tests from the doctests that were removed in commit:
http://git.openembedded.org/bitbake/commit?id=3a11c2807972bbbddffde2fa67fc380d159da467
(Bitbake rev: ae4a95780e3e08cf73c854efa8cd93379e00c4e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This plugin manages the firmware loading for the TI wl12xx series of bluetooth/wifi/fm chips.
The double --enable-tist when both bluetooth and wireless are enabled is ugly, but harmless
The background on the plugin: https://bugs.meego.com/show_bug.cgi?id=8418
(From OE-Core rev: 22254a32f05e9212411216bf1a4e48fd86b9c3ef)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Support resolvconf
* Avoid bashism $((metric++))
* Use 'domain' instead of 'search' for domain parameter
(From OE-Core rev: 3d4ccf98b83fe662f375cd5b029fdd602824c0e8)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* OE-Core provides its own copy of simple.script.
(From OE-Core rev: 3a36efc17c8504b00a7a277a67a7b10caa4d1cdc)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fixes the following error after a system library upgrade
| .../mipsel-oe-linux/4.6.4/cc1: error while loading shared libraries: libppl.so.10: cannot open shared object file: No such file or directory
(From OE-Core rev: 2c0fb8265d4876db537850f4b20c898dde3a0f4c)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The echo line here was merging multiple lines into one, and the result
was that if both image and package changes had to be comitted then only
the image changes were being committed and the package changes could
potentially be merged into the next package change. Quoting the variable
reference fixes this.
Fixes [YOCTO #2411]
(From OE-Core rev: 2086bb86885951d0a74342e30ff205c24cb93f0d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having two different version comparision algorithms in bitbake has never seemed
like a sensible idea. Worryingly, they also return different results to each other.
The vercmp_string API is relatively unused with no users in OE-Core or BitBake
itself for example. This patch converts it to use vercmp internalls, bringing
consitency to the comparisions which is easy now we have other recently added
functions. Yes, this changes behaviour but in this case I'd prefer we were
consistent than having two different comparisions.
(Bitbake rev: a569c816e016447d60624c59a750709d59a0f455)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: b766630ed7e099fffe817928a2811272677a1b26)
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't check for network access before grabbing the the current head,
cloning, or updating a clone when the protocol is 'file'.
(Bitbake rev: d5847bc5254b9d2f28a6b574f6157d1286add27c)
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes:
ERROR: For recipe gcc, the following files/directories were installed but not shipped in any package:
ERROR: /usr/libexec/gcc/i586-poky-linux/4.7.1/plugin/gengtype
(From OE-Core rev: 0be64cda0a20ca3aab75ee0cc360236d2dc40c95)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If KERNEL_IMAGETYPE is vmlinux, the expectation is most likely that there will
be no kernel image package, but we still want a vmlinux package for debugging,
so move kernel-vmlinux in front of kernel-image in PACKAGES.
(From OE-Core rev: b62a44a9bf7b268296aeed64469390aa7efc2e73)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default the runqemu script tries to set the group permissions on any
tap device it creates. The TUNSETGROUP ioctl is not implemented on some
popular host enterprise linux distributions.
Internally the script will exit as follows:
++ /opt/qemux86/bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/tunctl -b -g 100
+ TAP='TUNSETGROUP: Invalid argument'
+ STATUS=1
+ '[' 1 -ne 0 ']'
+ echo 'tunctl failed:'
tunctl failed:
+ echo TUNSETGROUP: Invalid argument
This patch implements a fallback to using the userid as the owner of
the tap device which is supported by all 2.6 kernels, the default remains
to try and use the groupid first.
(From OE-Core rev: 3af2bc59776fb738bd795160512a2f3f49ce6d32)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc 4.7 uncovers a type mismatch in the code. And this commit fixes the issue:
| /srv/home/nitin/builds/build-gcc47/tmp/sysroots/qemux86/usr/include/glib-2.0/glib/gthread.h:58:7: error: 'union' tag used in naming 'struct _GMutex' [-Werror=permissive]
| In file included from ./wtf/Platform.h:1217:0,
| from ./config.h:30,
| from wtf/gobject/GOwnPtr.cpp:19:
| wtf/gobject/GTypedefs.h:55:16: note: 'struct _GMutex' was previously declared here
NOTE: package qt4-x11-free-4.8.1-r41.1: task do_compile: Failed
(From OE-Core rev: 1923455340fca5e4b68a2c3ac3566a99baa93cd9)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are required to build recent versions of glib-2.0
(From OE-Core rev: bb996003547f9b93b734ddac11407b4eb42ecfac)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* When nfsserver get's stopped, "modprobe -r nfsd" may
hang indefinitely. As there's no need to unload the
module, just remove the call to modprobe.
(From OE-Core rev: aba81b64679ec0b1809946cb480e261af47f7625)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures that tcpwrapper usage is always disabled, this was
inconsistent because it would test for libwrap and sometimes enable
and sometimes not.
This ensures consistent build reproducibility.
(From OE-Core rev: afa0efc3473fb5ba88d95594e382da2e03145c3b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add dialog box while bitbake starts hob to inform user
to please wait for the hob screen to become visible.
(From OE-Core rev: d4d8dd9e272ee651b98bb336e96be601af366d41)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the SRC_URI to use the GNU_MIRROR
(From OE-Core rev: 753b22012f10c393c191d3116b9d38ee4be6d112)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up some packaging issues, cairo-sphinx was installed
and is a testing tool that does not need to be packaged
(From OE-Core rev: 6a0dac89932b41502bb55a2dae07d835ca3c6245)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bin/python2 link is provided by the python install process,
so no need to create it.
rebase these patches to the newer code:
fix_for_using_different_libdir.patch
04-default-is-optimized.patch
remove this patch as it is upstream now:
sys_platform_is_now_always_linux2.patch
Change default python version to 2.7.3 in the distro config
(From OE-Core rev: 5d92a95ea9b480235b7c9ca5949a681376eba725)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were a couple problems with the handling of precompiled locales.
- it gathered the list of locales from the directories - this breaks due to
the naming mismatch, e.g. en_US.UTF-8 vs en_US.utf8.
- it retained its hardcoded assumption that the non-suffixed locale (en_US, as
opposed to en_US.*) is UTF-8, while the others are otherwise. Hardcoding
this is both inflexible and just plain wrong for some toolchains. It's most
common in desktop distros for 'en_US' to be non-utf8, and ''en_US.UTF-8' is
utf8, and this is the case in some external toolchains as well.
The code now uses the SUPPORTED file to hold the knowledge it needs. This file
not only holds the list of locales to generate, but also maps the locale names
to the charsets they correspond to. The code now uses this to assemble its
charset map, falling back to the '.' suffix as charset when the locale is not
in the map. For precompiled, it now uses the locale->charset knowledge it has,
thereby allowing non-utf8 non-suffixed locale names, whereas for
non-precompiled, it reverts to the previous assumption, renaming the utf8
locale and forcibly suffixing the others.
So, a person maintaining an external toolchain recipe is responsible for
ensuring that the SUPPORTED file they provide matches up with the compiled
locales in the toolchain, if they want to utilize precompiled locales.
I believe in the long term the compiled case should do the same thing
precompiled does, and use SUPPORTED or a similar mechanism to encode the
knowledge, and if people want all the non-suffixed names to be utf8, they can
change that file to do so. This would avoid the hardcoded assumption in the
code, as well as consolidating the behavior between the compiled and
precompiled cases.
(From OE-Core rev: 3f36058923ccda25a3dd85046542e65b6034c09e)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Darren Hart
Bernhard Reutner-Fischer
Andreas Oberritter
Khem Raj
Jason Wessel
Peter Seebach
Richard Purdie
Koen Kooi
Jeff Polk
Saul Wold
Christopher Larson
Martin Jansa
Nitin A Kamble