Creating a 3.0 bbappend to enable work on the hardware yocto targets.
The SRCREV updates in this file are accurate, but compatibility
has been commented out until support can be verified.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means if PKGARCHCOMPAT_ARMV7A is set, "armv7a-vfp-neon" is renamed
to be "armv7a". Other compatibility mappings can be added as needed.
(From OE-Core rev: 08c0b7060009113e8dffdef51ff6b9b4b7f28894)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to include file class and file color in order to do the conflict
resolution required with a multilib design. This is normally disabled when
we don't use the internal dependency generator, patch enables it in
all cases.
(From OE-Core rev: 4c43ea3440ecca02d2945b02017f56a8de9ff808)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When linking with gcc, the parameter is read from left to write, if *.o
calls a function contained in libxxx, the parameter order should be
"gcc ... *.o -lxxx".
This commit fixes the problem in distcc.
(From OE-Core rev: 782499eaa817f1beecc0aea5bfa075196f8e2a53)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We switch to using os.lchown in order to avoid following a symlink.
We also now check if an item is a symlink, if so we avoid the
os.chmod as a symlink inherits the mode of it's target.
(From OE-Core rev: c64d075b3d367e6c76aafa17782585d026b1f31e)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default man pages are compressed, the way ncurses compresses
them causes differences (timestamp and name) to be embedded into
the gziped file. So each build will end up with a slightly
different file. Avoid this, by not compressing the man pages.
Avoid header conflict with curses.h using the multilib header
helper.
(From OE-Core rev: ae5269039511d0f3d8aa6a87cb8d9fcf01d79ddd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to mismatches between various header definitions in i386 and x86_64
we need to overwrite the i386 versions of the headers with their x86_64
equivalents.
This can not be done for the syscall.h as it's dynamically generated,
so use the header conflict resolution helper for that.
(From OE-Core rev: 019a33236f76aacb989e8f37b09b81599c27f296)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ..install.cmd conflicts between various configure runs.
This isn't used anywhere, so remove it to avoid the conflict.
(From OE-Core rev: f7b1ccfaa15e2dd4ff25f2a5f56ac3aff63c7288)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
beecrypt/gnu.h conflicts between 32-bit and 64-bit versions.
(From OE-Core rev: f520b91f878bb16b4b351ddb5f2240e318181044)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
apr.h conflicts between 32-bit and 64-bit versions
(From OE-Core rev: 6e280bf3e2edf3a9e7dfe0e86bcc5c763d52211a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bfd.h conflicts between 32-bit and 64-bit versions.
(From OE-Core rev: cd2975f7ad380aaac8c88bc151a2c34a42d4c540)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This helper function and associated header will allow us to
resolve two/three header files that conflict due to contents
that change based on wordsize and ABI.
(From OE-Core rev: 1fe66d01b7bce70a37245d47b1abce155fae926e)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This creates a live image as an IMAGE_FSTYPES, thus removing the
need to have additional -live.bb recipes. To create a live image
one just needs to add live to the IMAGE_FSTYPES list
(From OE-Core rev: b3ff63796cd6629975ff0a726ba18cc168e0a2b2)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensure that the command line options from the creation of the wrapper
are actaully passed into the wrapper.
(From OE-Core rev: 190b4f17f5fc9879e680278dd0e31e26e5f5bca0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I believe that powerpc-linux is now a common file across 32bit/64bit
linux for powerpc be it uclibc or glibc. I compared the differences
between powerpc-linux-uclibc and powerpc-linux files and it
powerpc-linux was more uptodate and all the new stuff it had was needed
for uclibc anyway so we do not need to keep exact copy of powerpc-linux
as powerpc-linux-uclibc instead we use powerpc-linux for powerpc/uclibc
targets.
Secondly linux specific files were added in archinfo dictionary
which I think logically belongs to targetinfo dictionary therefore
moved them to targetinfo
now uclibc/powerpc is buildable again
(From OE-Core rev: 0fc798640ba60cbb9074d617ba18518b113b7186)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These functions are determined by the C library so move them to common-glibc
and common-uclibc
(From OE-Core rev: 9226635ab28b5ca44ec04931d27c5c3313d56e61)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are tests for glibc behavior which we have enabled in uclibc.
Note that if we ever disable MALLOC_GLIBC_COMPAT the uclibc tests
will need to be changed (but I believe this would also entail massive
patching to the rest of userspace so this should be unlikely).
(From OE-Core rev: cab512d7ee50fb55b9412c0e1a52a589de09e0a7)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note that we had a number of unused and ignored settings wrt mutex
support. These have been dropped as they weren't being used and
implied some odd things to boot. This is also a partial resync with
oe.dev which had some, but not all of these changes.
(From OE-Core rev: 7cc52fca921259e331a34263d8113e29b9e0dee9)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More re-sync with oe.dev
(From OE-Core rev: a1ce2e6039652c94ba34bfe7343a4424a1cc133b)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Taken from oe.dev
(From OE-Core rev: 0844b64ea8b43719edfe1a887d56b9f5e3ceefaa)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More re-sync with oe.dev
(From OE-Core rev: 75aa86f4800a8344e1dfe721a729fdd281e26a20)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Part of re-syncing with oe.dev, move samba_cv_HAVE_IFACE_* to common-linux
(From OE-Core rev: bf1e4b1f4952d2dd8e4acd6babb96b3c65999df0)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify configuration "polkit-1" in /etc/pam.d/ for supporting pam.
(From OE-Core rev: 6bc6406b019ebc104a4abfb15c2d2e1263968664)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I make a patch and some changes in dropbear.inc for supporting pam.
- Enable pam in configure
- Modify file option.h to open pam supporting
(From OE-Core rev: e8f19e8616fb1b0c2d977fb63eaa64f504fb774b)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
add patches to make at enable pam support
(From OE-Core rev: eabf5a639c94a016316bfd6707ee6e5bd676d85d)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
add shadow-update-pam-conf.patch to update the pam related configure files
in oe way rather than Fedora.
(From OE-Core rev: 10e6fdd7e8fed5733f65a504148bba54bccb3c48)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable PAM support for cronie and update its pam config file 'crond'.
(From OE-Core rev: fec92e4b0c34adc9d512f61ff22de9026b83e3b4)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to DISTRO_FEATURES to add pam support for sudo, and import
configure file from Fedora.
(From OE-Core rev: 1f7e088f2d570d33c2344e32a05193b37a75ea76)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to DISTRO_FEATURES then add screen pam support or not.
Press "Ctrl+a x" will lock the screen terminal, then unlock it will
use pam.
Add pam related configure file sceen.pam from Fedora.
(From OE-Core rev: 7c08305f8008ab322d19d0a0852a851fd44ae510)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to distro_feature then add pam support for cups or not.
(From OE-Core rev: d1e0482bf7fb8e31746cb0e53bbd708fc08c9846)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update libpam to 1.1.4, and add dependecy cracklib because run xtexts will
need pam-plugin-cracklib.
There are some additional checks under subdirectory xtests and make it
as a subpackage libpam-xtests.
(From OE-Core rev: f9158bf219479c2da56dd21a13ecee3176cd6f8a)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The introduction of the linux-yocto-3.0 kernel is taking
precedence over the known working 2.6.37 version. Forcing
2.6.37 until 3.0 is validated on the qemu machines.
(From OE-Core rev: 77a41ab5ca92606ee08f002a8dfc631f642a3179)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use --keep-cr option to "git am" or otherwise we lose carriage returns
which can be important for patches against files that use CRs.
(From OE-Core rev: bab4952075245563787293428e031fa11d6cb2b4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was not doing anything (we don't even have the eglibc-svn directory).
(From OE-Core rev: f707be7ad16003af6e260297b29e30c92f02a612)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to have static module-init-tools for the cross
tools. Building such binaries requires a static libc which is not
required by the rest of OE and which is deprecated and not installed
by distributions like Fedora.
(From OE-Core rev: ff98be5bd096edc9728ab21d0a344d88c0d5add8)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wildcards in SRC_URI are not supported by oe-core and work only
when last (or first?) FILESPATH element points to the containing
directory. Specifying plain dir works fine for this recipe.
(From OE-Core rev: 104d9076efbba26c524649baa602d139e79ac47c)
Signed-off-by: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The long term solution is to remove the IMAGE_FEATURE check since images are not allowed to influence recipe compile options.
(From OE-Core rev: 1c24f36e982e680871bf7a05ac6e820314e19c7c)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Observed this to fail when populating new tmpdir
from shared state
(From OE-Core rev: 7bdc14b0537afa004830f1f23253b2778bb0e098)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Default to XTERM_TERM* instead of KONSOLE_TERM* since Konsole support
only works for KDE 3.x, and note this in the comments (see Yocto bug 1294
for further details.) Also add a comment about PATCHRESOLVE = "noop".
(From OE-Core rev: 4c88733f8bace5bb6503ebfe5238e96fe424e6d0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some additions and grammar fixes to the comments, as well as moving
the locale options to the same place.
(From OE-Core rev: f3cd4845d27fb5cecd173cb60c947bb36888d2e5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oprofileui-nativesdk would be a better way to handle these kinds of
requirements with the modern system, and it is not something that most
users will need to configure anyway (nor was it supported.)
(From OE-Core rev: 87443c874f03b2220290f13908da58a414d3a3a9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using i686 doesn't work well with locale generation and doesn't gain anything
so revert to the i586 default.
(From OE-Core rev: 79b7b1aab5d3d002bfa7a49887d5d834c29eae45)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield
Richard Purdie
Yu Ke
Mark Hatle
Dongxiao Xu
Saul Wold
Khem Raj
Tom Rini
Xiaofeng Yan
Wenzong Fan
Kang Kai
Paul Eggleton
Enrico Scholz
Enrico Scholz
Koen Kooi