Fixes [YOCTO #1501]
hello-mod is an example kernel module, and does not provide any real
functionality. As such, it would be better placed under meta-skeleton than
meta.
(From OE-Core rev: bde1744018afd4616e114b20ffdc21b9abddcedc)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add reason for not updating syslinux this release.
(From OE-Core rev: d037060e2fec073ccfb33c83d426c9775b331457)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch changes P to BP to address where a file is installed
from when building with PAM enabled and using multi-lib.
[YOCTO #2224]
(From OE-Core rev: 7304874058011360070ab28f14423273aa99360e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* otherwise it sometimes finds host's expat
(From OE-Core rev: 19d034963cc16392a12db144e04c55cbab245576)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After successfully installed some lib32 multilib packages into the
x86-64 image, we just found that the file content of /var/lib/opkg/status in
rootfs changed after the very 1st boot, many lib32 related packages information
are missing in that file.
The missing arch "x86" in arch.conf cause the above problem. Adding the
condition for the content of arch.conf when enable multilib. If build
multilib image, "ALL_MULTILIB_PACKAGE_ARCHS" will be used instead of
"PACKAGE_ARCHS".
[YOCTO #1522]
(From OE-Core rev: 700fc9a5d25ebb1f85cb9db11e41ba502744fe7e)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu can't launch a target image on Fedora 16 64bit or Opensuse 12.1
64bit, this is because runqemu needs the host's libGL.so, which requires
GLIBC_2.14 which is defined in libc.so.6, but our default libc.so.6 is
version 2.13, here is the message from Richard:
The easiest solution would be to change the nativesdk libc to 2.15. I don't
think we plan to do this for the target libc for 1.2 but we could change
nativesdk's version if its well tested
[YOCTO #1968]
(From OE-Core rev: 5f1becfba0b801eeacb1c626659fe46cd6df25bf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The git may fail to rebuild when perl's Config.pm or config.h changes,
this is because Makefile detects that perl/perl.mak is out of date.
Remove perl.mak to let Makefile regenerate it would fix the error.
Both git and git-native have this problem.
To reproduce the error: (On x86_64 host)
$ bitbake git-native
$ touch tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.2/Config.pm
$ bitbake git-native -ccompile -f
[YOCTO #2156]
(From OE-Core rev: 7f9a3eb4e81f708573cfd5123655441d3b9532a5)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 2257]
GPT partitions are common for EFI systems. Add support for them by
including the part_gpt partition module in the grub-efi image. In
order to allow for loading a Linux kernel from an EXT* filesystem,
include the ext2 module as well.
With this fix applied, I was able to boot from a USB key using a
GPT partition table with the following layout:
$ sudo gdisk -l /dev/sdc
GPT fdisk (gdisk) version 0.8.2
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sdc: 7669824 sectors, 3.7 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 68FA7CD4-E0C3-4A8E-82B5-1331C9B17A3C
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 7669790
Partitions will be aligned on 2-sector boundaries
Total free space is 7428816 sectors (3.5 GiB)
Number Start (sector) End (sector) Size Code Name
1 34 32801 16.0 MiB 0700 # FAT16
2 32802 240974 101.6 MiB 0700 # EXT3
From within GRUB, booted as bootia32.efi from the BOOT partition, I
booted the OS with the following commands:
grub> linux (hd0,gpt2)/vmlinuz rootwait root=/dev/sda2 console=ttyS0,115200
grub> boot
This change will enable BSP developers to use the grub-efi image in
their own images as well as enable upcoming changes to the installer
to support EFI.
(From OE-Core rev: a2c6687410f00623efe8dfcb22385cbbc7f2e1a9)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Kishore Bodke <kishore.k.bodke@intel.com>
CC: Rahul Saxena <rahul.saxena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Data from 64b target is truncated by 32b host. This patch makes type of data
buf in host same as target.
[YOCTO #2221] got fixed.
(From OE-Core rev: d9f12cee3847cbf1cf9fc20cb614f8cd67d2a2ee)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
[Bumped PR - sgw]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable use of syslog to prevent sysroot user and group additions
from writing entries to the host's syslog.
This fixes [YOCTO #2012]
(From OE-Core rev: e5aee0a2f5973a7aef81d0f38307a93791f616c6)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gl.pc should be packaged in libgl-dev not the mesa-dev package
Fixes [YOCTO #2059]
(From OE-Core rev: d9d4fe9885e398df2062b3f2aed3fc274c656736)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a nicer theme (Clearlooks) to improve Hob's appearance in the self
hosted image and fix the progress bar not changing colour when the build
fails.
Fixes [YOCTO #2208]
(From OE-Core rev: 19a13ecceac1f48fcfe1552e88df18edd96e1bea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default amount of reserved space for ext2/3 is 5% - this amounts to
about 2GB of a 40GB filesystem that the builder user can't make use of.
We don't need this much reserved so peg it back to 0.5% which should be
more than enough.
(From OE-Core rev: c62d6d119c107fc60894ba25e83c96536a1b423c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Corrected the package content of connman-test.
This is part of the bug fixing [YOCTO #2216].
(From OE-Core rev: 4df39d673156cc63b94531515d8f92ca4d0da77f)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Removed ofono addtion - sgw
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed an error in multilib prefix extracting.
(From OE-Core rev: 0e66900cbe6438b9b3ecfef1c348a5575bd27c41)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recent Linux kernel tries to load the libertas firmware with the version
string in its name first. This results in a delayed firmware load on
system boot. Keep the default libertas firmware name and add a link for
older driver versions.
(From OE-Core rev: baa1323dfff35ccd5aebc036ca97925a1f1a604e)
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it works only with 'new' packages and with fixed opkg-utils it will unpack
*all* packages, because filelist doesn't support 'cache' like Packages does
(From OE-Core rev: ad77d367e1526a805c383ce20f8f81ef3082c3d8)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2227]
I've updated the image descriptions per the bug description.
(From OE-Core rev: 479b020edbc609c3ae1e3846e9e0d1643ac10059)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fixes the following configure error by prefixing
PKG_CONFIG_SYSROOT_DIR:
| grep: /usr/include/gstreamer-0.10/gst/gstconfig.h: No such file or directory
(From OE-Core rev: 3c77f7a3bbd47d33dd7cac7ba536675357991c5f)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 2236]
With recent Linux kernel headers, such as 3.3 in Fedora 16, the linux/ext2_fs.h
header has been removed. This causes compile failures for syslinux-native.
Backport a fix to address this from syslinux-4.06-pre3.
(From OE-Core rev: bc875f685f38024ea96ba8570550d4e505a1e4b0)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Ross Burton <ross.burton@intel.com>
CC: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ndbm.h is needed by python for dbm module. This is why -enable-libgdbm-compat was added
to configure.
The second change is because python is looking for the gdbm headers in include/gdbm.
The easiest way to solve this issue is to add symlinks in include/gdbm.
[YOCTO #1937]
(From OE-Core rev: e4d2ee00419f675ba8b7fb5d75256762253d8b32)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to have about 40G to do a full sato build even with rm_work enabled
Add sudo priveleges inorder to allow the builder user to setup the tap/tun
devices needed by runqemu
(From OE-Core rev: 3e4562500956550dbae5467a5fe9289f1d32f775)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the experimental SH tunings to match the tunings README.
These tunings have not been tested, and are experimental!
(From OE-Core rev: 603a15bf4c838e4b6352e31f70a958d93f91138f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanup the ARM tunings to match the new tunings README file.
The ARM tunings define TUNE_PKGARCH in a way that only one main
arm architecture, i.e. armv6, may be defined at the same time. We
may have to revise these settings in the future, as well as figure
out a way to better differentiate various optimize tunings in the
package arch. (This was not done, to preserve existing behavior!)
Fix a number of minor issues w/ the armv5 tunings where DSP variants
were referenced but not defined.
Fix incorrect armv7 entries in armv7a.
Fix PACKAGE_EXTRA_ARCHS definitions inside of tune-cortexm3 and tune-cortexr4.
(From OE-Core rev: 0e71abea5458122188d5eddef2c17147f61ff895)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanup the PowerPC tunings to match the new tuning README file.
Default PowerPC to using TUNE_PKGARCH = ${TUNE_PKGARCH_tune-<tune>}
Fix AVAILTUNE settings in ppc603e, and ppce500mc to be addative.
Correct potentially overlapping "spe" definitions in ppce500 and ppce500v2.
(From OE-Core rev: f81f71bcff4bb1032b034b068efe6065113ca9e7)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanup the MIPS tunings to match the new tuning README file. Also
add a MIPS specific README file to explain the MIPS specifical
architectural issues.
Finally correct the variant configurations within the tune-mips32.inc.
(From OE-Core rev: efbfa2ace3362393a20340af93e8dcab17a8619a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We perform a basic cleanup of the IA32 architecture and related
tunings in order to match the rules and descriptions within the
new tuning README file.
A number of small issues were corrected in the "c3" tuning to
bring it inline with the README.
(From OE-Core rev: ab77d3401908964f3249c761969600b5ec1bfbd0)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new README that covers the basic items used with various cpu
tunings. The goal is to better help people understand the various
settings and where things should or should not be defined.
Corresponding architecture README files will also be generated to
explain the particulars of architectural tunings.
Also remove the default TUNE_PKGARCH setting in bitbake.conf. This
was done to ensure an error occurs if an invalid tuning is defined.
(From OE-Core rev: e138f9f7e48e0af94c5c88045c4f0581cc68248d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe already includes "task-self-hosted" in the IMAGE_INSTALL
line:
IMAGE_INSTALL = "task-core-boot task-core-apps-console task-core-ssh-openssh task-self-hosted"
so there's no apparent need to include it again further down.
(From OE-Core rev: bbc7f24d463c11b16f000462528c18bbb86b1e88)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
g++ 4.7 is detecting inheritence problems
which we solve by explictly specifying
elements in constructors
(From OE-Core rev: 553ac1bf0ebf2ecf4e45ace4016b50c810ef7b26)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
C getpid needs unistd.h for getting
its signature
(From OE-Core rev: da89bb83298eaf28faebcc8782f207927fbe190a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Include unistd.h for all linux and not
just for android.
(From OE-Core rev: c870606c9da2fa90df2cd7c4a198e3bf5340304b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The modification is as follow:
- Modify some codes with more preferable readability and vague description.
- Use existed functions instead of custom functions.
(From OE-Core rev: 514319c4a15156cd63a4ac3c6ee903f64c98884e)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PACKAGE_NO_GCONV var manipulations ware happening in the
eglibc-options.inc file, and the eglibc-locale recipe do not
see it. Moving that into the libc-package.bbclass which is
common to eglibc & eglibc-locale recipes.
This fixes bug: [YOCTO #2089]
This avoids this error for poky-tiny
NOTE: package eglibc-locale-2.13-r19: task do_populate_sysroot: Started
ERROR: Error executing a python function in
/opt/poky.git/meta/recipes-core/eglibc/eglibc-locale_2.13.bb:
OSError: [Errno 2] No such file or directory:
'/home/rchatre/concordia/dev/ccd-distro-work/tmp/work/core2-poky-linux/eglibc-locale-2.13-r19/package/usr/lib/gconv'
ERROR: The stack trace of python calls that resulted in this exception/failure
was:
ERROR: File "package_do_split_gconvs", line 264, in <module>
ERROR:·
ERROR: File "package_do_split_gconvs", line 45, in package_do_split_gconvs
ERROR:·
ERROR: File "package.bbclass", line 30, in do_split_packages
ERROR:·
ERROR: The code that was being executed was:
ERROR: 0260:»------»-------bb.note("generation of binary locales disabled.
this may break i18n!")
ERROR: 0261:
ERROR: 0262:
ERROR: 0263:
ERROR: *** 0264:package_do_split_gconvs(d)
ERROR: 0265:
ERROR: (file: 'package_do_split_gconvs', lineno: 264, function: <module>)
ERROR: 0041:»------»-------»-------d.setVar('RPROVIDES_%s' % pkg,
pkg.replace(bpn, 'glibc'))
ERROR: 0042:
ERROR: 0043:»------do_split_packages(d, gconv_libdir,
file_regex='^(.*)\.so$', output_pattern=bpn+'-gconv-%s', \
ERROR: 0044:»------»-------description='gconv module for character set
%s', hook=calc_gconv_deps, \
ERROR: *** 0045:»------»-------extra_depends=bpn+'-gconv')
ERROR: 0046:
ERROR: 0047:»------def calc_charmap_deps(fn, pkg, file_regex,
output_pattern, group):
ERROR: 0048:»------»-------deps = []
ERROR: 0049:»------»-------f = open(fn, "r")
ERROR: (file: 'package_do_split_gconvs', lineno: 45, function:
package_do_split_gconvs)
ERROR: Function failed: package_do_split_gconvs
ERROR: Logfile of failure stored in:
/home/rchatre/concordia/dev/ccd-distro-work/tmp/work/core2-poky-linux/eglibc-locale-2.13-r19/temp/log.do_package.31042
NOTE: package eglibc-locale-2.13-r19: task do_package: Failed
ERROR: Task 552 (/opt/poky.git/meta/recipes-core/eglibc/eglibc-locale_2.13.bb,
do_package) failed with exit code '1'
Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This Fixes [Ycoto #2223] bug.
The gcc osdir is obtained in the do_install by invocation of
command "gcc -print-multi-os-directory". For x32 it returns gcc
osdir for the default abi which is x86_64. Fix this by adding
target abi parameter to the gcc command line to get correct gcc
osdir with invocation of command "gcc -mx32 -print-multi-os-directory"
(From OE-Core rev: e65b6a4282d5c4882d0565b79ccba99db90161ff)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Explicitly set umask to 022. Otherwise the build system's
umask may leak into the image.
(From OE-Core rev: d2a54427481856238bdfec9723cf575088320512)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
actually if a package has a license in its LICENSE variable
which is not in the whitelist nor in the blacklist and even
if an other license in this variable is in the whitelist,
the package gets excluded and is not taken in account in the
copyleft_compliance.
This patch solves this by excluding a recipe _only_ if the
LICENSE variable includes a pattern from the blacklist and
including a recipe only if it includes a variable from the
whitelist _and_ none from the blacklist.
Example in busybox which has LICENSE="GPLv2 & BSD-4-Clause",
with the actual behaviour (where he blacklist contains only
CLOSED Proprietary) we get :
DEBUG: copyleft: busybox-1.19.4 is excluded: recipe has excluded licenses: BSD-4-Clause
which is not sane because busybox is covered by a copyleft license
which is GPLv2 and should match the default whitelist which is
GPL* LGPL*.
(From OE-Core rev: 987d06447d2eacf2e01f08e29469c00fbb0ef1db)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A cleaner way to check if copyfile suceeded is to use os.path.isfile.
In this way we can omit warns in some python versions where copyfile
return the same non-0 value even is this action is successfull.
(From OE-Core rev: fa51fe19a1dc1ddc4c9ec879a782953fd6a15117)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A comment in the binutils sources indicate that it should support all of the
-march= parameters that gcc supports. The tune validations noted that
gas failed on -march=armv5e.
It is not yet clear to me if this patch belongs upstream or not.
(From OE-Core rev: 4f2503ebdb5c491b758cbdf6eb7df96d4295c24f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix some library dependency issues:
* Disable lzma as xz-native is unstated in DEPENDS
* Disable bzip2 for native as it is in ASSUME_PROVIDED and thus isn't
available when elfutils-native is normally built, but if it gets
rebuilt the link will be made; plus we don't need it.
(From OE-Core rev: 1634d736c55f767fe82a46bbb7f83c32006fece9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fixes communication between gdbserver and gdb-cross
by using the same expat settings for both recipes.
* Adds missing build dependencies for expat/expat-native.
* Adds missing glibc-thread-db runtime recommendation
to gdbserver, which was set only for gdb.
(From OE-Core rev: 38ee88e3b32b7444d7f1eb64f1b4f69a48fe0458)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use SDK_GLIBC_ADDONS for eglibc-nativesdk so that it is not
dependant on the target eglibc's GLIBC_ADDONS settings.
(From OE-Core rev: e165203a6a7eb1fd47a20c3ede4d5a20ad49487f)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext-minimal-native andgettext-native are trampling over each other's files. This can
be reproduced with:
bitbake gettext-minimal-native
bitbake gettext-native
bitbake gettext-native -c clean
bitbake shadow-native
which will fail since the aclocal gettext macros will have disappeared. This patch
fixes the problem by giving ownership of them to gettext-minimal-native and ensuring
there is a correct dependency on this.
(From OE-Core rev: 5bcb68a232539cf11a30e3b812b2fbd6d7d76e35)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a similar situation to:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=3c96a5386355969428163ddb60216cc989e00b3d
Builds were failing with a failure in configure:
| checking for i586-poky-linux-gcc... ccache i586-poky-linux-gcc -m32 -march=i586 -L/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/qemux86/usr/lib
| checking whether the C compiler works... no
| configure: error: in `/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/work/i586-poky-linux/gst-ffmpeg-0.10.13-r2/gst-ffmpeg-0.10.13':
| configure: error: C compiler cannot create executables
| See `config.log' for more details
config.log shows:
configure:3976: ccache i586-poky-linux-gcc -m32 -march=i586 -L/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/qemux86/usr/lib -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed conftest.c >&5
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.4/ld: cannot find crt1.o: No such file or directory
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.4/ld: cannot find crti.o: No such file or directory
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.4/ld: cannot find crtbegin.o: No such file or directory
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.4/ld: cannot find -lgcc
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.4/ld: cannot find -lgcc_s
collect2: ld returned 1 exit status
The reason being the --sysroot option is missing from the gcc commandline and
its looking in nightly-x86, not nightly-world in this case.
There is no reason to add extra -L options to the compiler, the sysroot already
takes care of this. We can therefore simply remove this incorrect CC line.
(From OE-Core rev: 78299c87eafbea8331fa062f61095dd8de429109)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A cmp instruction with two constants is invalid, therefore 'g' constraint
is not correct but must be "rm" instead.
(From OE-Core rev: 1161c40a26146629613bd6a17b263175a492b751)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart
Saul Wold
Martin Jansa
Xiaofeng Yan
Lianhao Lu
Robert Yang
Zhai Edwin
Scott Garman
Joshua Lock
Paul Eggleton
Dexuan Cui
Stefan Herbrechtsmeier
Elizabeth Flanagan
Andreas Oberritter
Andrei Gherzan
Mark Hatle
Robert P. J. Day
Khem Raj
Nitin A Kamble
Eric Bénard
Richard Purdie