Fixes [YOCTO #1501]
hello-mod is an example kernel module, and does not provide any real
functionality. As such, it would be better placed under meta-skeleton than
meta.
(From OE-Core rev: bde1744018afd4616e114b20ffdc21b9abddcedc)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add reason for not updating syslinux this release.
(From OE-Core rev: d037060e2fec073ccfb33c83d426c9775b331457)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch changes P to BP to address where a file is installed
from when building with PAM enabled and using multi-lib.
[YOCTO #2224]
(From OE-Core rev: 7304874058011360070ab28f14423273aa99360e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* otherwise it sometimes finds host's expat
(From OE-Core rev: 19d034963cc16392a12db144e04c55cbab245576)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After successfully installed some lib32 multilib packages into the
x86-64 image, we just found that the file content of /var/lib/opkg/status in
rootfs changed after the very 1st boot, many lib32 related packages information
are missing in that file.
The missing arch "x86" in arch.conf cause the above problem. Adding the
condition for the content of arch.conf when enable multilib. If build
multilib image, "ALL_MULTILIB_PACKAGE_ARCHS" will be used instead of
"PACKAGE_ARCHS".
[YOCTO #1522]
(From OE-Core rev: 700fc9a5d25ebb1f85cb9db11e41ba502744fe7e)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu can't launch a target image on Fedora 16 64bit or Opensuse 12.1
64bit, this is because runqemu needs the host's libGL.so, which requires
GLIBC_2.14 which is defined in libc.so.6, but our default libc.so.6 is
version 2.13, here is the message from Richard:
The easiest solution would be to change the nativesdk libc to 2.15. I don't
think we plan to do this for the target libc for 1.2 but we could change
nativesdk's version if its well tested
[YOCTO #1968]
(From OE-Core rev: 5f1becfba0b801eeacb1c626659fe46cd6df25bf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The git may fail to rebuild when perl's Config.pm or config.h changes,
this is because Makefile detects that perl/perl.mak is out of date.
Remove perl.mak to let Makefile regenerate it would fix the error.
Both git and git-native have this problem.
To reproduce the error: (On x86_64 host)
$ bitbake git-native
$ touch tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.2/Config.pm
$ bitbake git-native -ccompile -f
[YOCTO #2156]
(From OE-Core rev: 7f9a3eb4e81f708573cfd5123655441d3b9532a5)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 2257]
GPT partitions are common for EFI systems. Add support for them by
including the part_gpt partition module in the grub-efi image. In
order to allow for loading a Linux kernel from an EXT* filesystem,
include the ext2 module as well.
With this fix applied, I was able to boot from a USB key using a
GPT partition table with the following layout:
$ sudo gdisk -l /dev/sdc
GPT fdisk (gdisk) version 0.8.2
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sdc: 7669824 sectors, 3.7 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 68FA7CD4-E0C3-4A8E-82B5-1331C9B17A3C
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 7669790
Partitions will be aligned on 2-sector boundaries
Total free space is 7428816 sectors (3.5 GiB)
Number Start (sector) End (sector) Size Code Name
1 34 32801 16.0 MiB 0700 # FAT16
2 32802 240974 101.6 MiB 0700 # EXT3
From within GRUB, booted as bootia32.efi from the BOOT partition, I
booted the OS with the following commands:
grub> linux (hd0,gpt2)/vmlinuz rootwait root=/dev/sda2 console=ttyS0,115200
grub> boot
This change will enable BSP developers to use the grub-efi image in
their own images as well as enable upcoming changes to the installer
to support EFI.
(From OE-Core rev: a2c6687410f00623efe8dfcb22385cbbc7f2e1a9)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Kishore Bodke <kishore.k.bodke@intel.com>
CC: Rahul Saxena <rahul.saxena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Data from 64b target is truncated by 32b host. This patch makes type of data
buf in host same as target.
[YOCTO #2221] got fixed.
(From OE-Core rev: d9f12cee3847cbf1cf9fc20cb614f8cd67d2a2ee)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
[Bumped PR - sgw]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable use of syslog to prevent sysroot user and group additions
from writing entries to the host's syslog.
This fixes [YOCTO #2012]
(From OE-Core rev: e5aee0a2f5973a7aef81d0f38307a93791f616c6)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gl.pc should be packaged in libgl-dev not the mesa-dev package
Fixes [YOCTO #2059]
(From OE-Core rev: d9d4fe9885e398df2062b3f2aed3fc274c656736)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is common to use the same remote branch name as the local branch
name. In this case, it would be nice not to have to specify the
remote branch name.
Make the -b argument optional and assume the remote branch is the same
name as the local branch. Print a NOTE to this effect so as not to
catch the user by surprise:
NOTE: Assuming remote branch 'notthere', use -b to override.
If the remote branch doesn't exist, a WARNING is displayed just as if
the user had used -b to specify a non-existent branch:
WARNING: Branch 'notthere' was not found on the contrib git tree.
Please check your remote and branch parameter before sending.
(From OE-Core rev: 62570b7e3db44fbc3461f650abe6c4613940e068)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding this to the nfs to match the ext3 kernelcmdline, this re-enables
keyboard input on the qemuppc.
[YOCTO #2058]
Thanks to Yi Zhao <yi.zhao@windriver.com> for the initial patch suggestion
(From OE-Core rev: 1a82989345fb98becb487d270fd93a5e6dffeb47)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a nicer theme (Clearlooks) to improve Hob's appearance in the self
hosted image and fix the progress bar not changing colour when the build
fails.
Fixes [YOCTO #2208]
(From OE-Core rev: 19a13ecceac1f48fcfe1552e88df18edd96e1bea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default amount of reserved space for ext2/3 is 5% - this amounts to
about 2GB of a 40GB filesystem that the builder user can't make use of.
We don't need this much reserved so peg it back to 0.5% which should be
more than enough.
(From OE-Core rev: c62d6d119c107fc60894ba25e83c96536a1b423c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Corrected the package content of connman-test.
This is part of the bug fixing [YOCTO #2216].
(From OE-Core rev: 4df39d673156cc63b94531515d8f92ca4d0da77f)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Removed ofono addtion - sgw
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed an error in multilib prefix extracting.
(From OE-Core rev: 0e66900cbe6438b9b3ecfef1c348a5575bd27c41)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recent Linux kernel tries to load the libertas firmware with the version
string in its name first. This results in a delayed firmware load on
system boot. Keep the default libertas firmware name and add a link for
older driver versions.
(From OE-Core rev: baa1323dfff35ccd5aebc036ca97925a1f1a604e)
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it works only with 'new' packages and with fixed opkg-utils it will unpack
*all* packages, because filelist doesn't support 'cache' like Packages does
(From OE-Core rev: ad77d367e1526a805c383ce20f8f81ef3082c3d8)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2227]
I've updated the image descriptions per the bug description.
(From OE-Core rev: 479b020edbc609c3ae1e3846e9e0d1643ac10059)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fixes the following configure error by prefixing
PKG_CONFIG_SYSROOT_DIR:
| grep: /usr/include/gstreamer-0.10/gst/gstconfig.h: No such file or directory
(From OE-Core rev: 3c77f7a3bbd47d33dd7cac7ba536675357991c5f)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 2236]
With recent Linux kernel headers, such as 3.3 in Fedora 16, the linux/ext2_fs.h
header has been removed. This causes compile failures for syslinux-native.
Backport a fix to address this from syslinux-4.06-pre3.
(From OE-Core rev: bc875f685f38024ea96ba8570550d4e505a1e4b0)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Ross Burton <ross.burton@intel.com>
CC: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ndbm.h is needed by python for dbm module. This is why -enable-libgdbm-compat was added
to configure.
The second change is because python is looking for the gdbm headers in include/gdbm.
The easiest way to solve this issue is to add symlinks in include/gdbm.
[YOCTO #1937]
(From OE-Core rev: e4d2ee00419f675ba8b7fb5d75256762253d8b32)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: dd15a92a0932d3e177c0ca7b2923da1d72046e51)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the help info for both "yocto-bsp" and "yocto-kernel" to
emphasize that those are the *complete* lists of commands, not just
the most commonly used ones.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
params["pmake"] should be in the format "-j int".
When loading/saving "PARALLEL_MAKE" into templates, configuration.pmake will be
converted into "-j int", as "PACKAGE_CLASSES" and "BBLAYERS" do.
For "PACKAGE_CLASSES" and "BBLAYERS", params["pclass"] and params["layer"] are
also strings rather than the types of configuration.curr_package_format and
configuration.layers.
(Bitbake rev: d49db15badb77855cef855ee73430fcbc16b6916)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
image_fstypes in the configuration has been changed into a string rather than
a list. Here we correct it in __init__() of class Configuration. At other places,
image_fstypes are all strings.
(Bitbake rev: 59dd7e91c11e0348f967578f32e13f5984c6a452)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid the empty white space appearing on top of the machine selection combo
box and the image selection combo box in the "Image configuration" screen
[Yocto #2166]
(Bitbake rev: 9d30ad56803c67d2dc7ebddd7c339038438f02ba)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We call intsize_to_string (and string_to_intsize) in 3 different places.
We unify the implementations into one place.
(Bitbake rev: 578ce86a9ac2110f5b128aae582c6e0b3e739cec)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle exceptions during type conversion to integers.
(Bitbake rev: bb3a4e2d40486a347c13563d73e4df6d015a3c6c)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle exceptions during type conversion into integers.
(Bitbake rev: e03da8876045af545303db2b8044a17657337140)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We also need to check if the selected image is "Create your own image"
and set it as active.
Besides, to avoid the impact of set_active(), we need to move the
connect signal in the end of the update_image_combo() function.
(Bitbake rev: 54ae7ddac450b4717e5ccae3bfe9acb479449451)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We will not display multilib recipes and tasks in separate tabs,
therefore remove the specific types.
(Bitbake rev: da69e665196714b0f2039c11f9f232db7b58bce3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob uses API from pygtk 2.22, therefore check to see whether this
version is available and exit cleanly if not.
(Bitbake rev: 192d5fdf9ea27cdc8b043204857ae5b21173a011)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the deploy button is disabled since there is no deployable image,
the console will show the warning message:
WARNING: /home/yocto-build5/poky-contrib/bitbake/lib/bb/ui/crumbs/imagedetailspage.py:333:
GtkWarning: /build/buildd/gtk+2.0-2.22.0/gtk/gtkwidget.c:5684: widget not within a GtkWindow
self.deploy_button.grab_default()
This patch is to remove the warning message.
(Bitbake rev: 51a9a5557bb798b559874a4e6dc9924380b5d9a4)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously we reused the info display file which is for indication of tooltips.
But it is too small, when it is shown on the dialog as the dialog indication icon,
it becomes unclear after being stretched out. So, we replace it with a larger
icon.
(Bitbake rev: 87282847f1ba56420b0c6dbf04bea6e518962398)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If save every selected package into IMAGE_INSTALL field, and then build
the saved bb file by bitbake command line, it will report errors since
some packages could not be found since they are dynamically generated.
With this commit, Hob will only save those packages into the
IMAGE_INSTALL variable which are brought in by user.
(Bitbake rev: 6c970d07422bb9a8fcf339315587cfc9b207a44e)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally we added -dev and -dbg postfixes to our selected packages as
toolchain packages. However, some package names are modified in recipes,
so we could not rely on its base name. The new approach is to detect if
a package is selected, then include those packages under the same recipe
endswith "-dev" and "-dbg".
This fixes [YOCTO #2185]
(Bitbake rev: f99c66071bce63780301e1639d74316503ca934c)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes, certain variables have duplicated values inside, for example,
IMAGE_FSTYPES = "tar.bz2 ext3 tar.bz2 ext3"
We need to remove the redundancy for those values.
(Bitbake rev: 98849cf9201239b23bbbe9247db4d6901f0ed905)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initiate_new_build() function is in async mode and could not be called
before another async function.
Also we could not initialize the build if user simply change a setting,
therefore remove this function.
(Bitbake rev: c184cefe90115623e2312ad2bbe34ea95788c129)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If values in advanced is changed, we also need to reparse the cache to
get the latest value.
(Bitbake rev: 7b2f6744201511060f26cd2761e9556efec4b9a2)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define the empty curr_mach to be "" instead of None.
Fix the judgement for ' if self.curr_mach == "" ' to be
' if self.curr_mach '.
Also set machine to bitbake server when "MACHINE" is not empty.
(Bitbake rev: 662fa1b126d5b9b3a80193205c22b2fe29305185)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to have about 40G to do a full sato build even with rm_work enabled
Add sudo priveleges inorder to allow the builder user to setup the tap/tun
devices needed by runqemu
(From OE-Core rev: 3e4562500956550dbae5467a5fe9289f1d32f775)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the experimental SH tunings to match the tunings README.
These tunings have not been tested, and are experimental!
(From OE-Core rev: 603a15bf4c838e4b6352e31f70a958d93f91138f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanup the ARM tunings to match the new tunings README file.
The ARM tunings define TUNE_PKGARCH in a way that only one main
arm architecture, i.e. armv6, may be defined at the same time. We
may have to revise these settings in the future, as well as figure
out a way to better differentiate various optimize tunings in the
package arch. (This was not done, to preserve existing behavior!)
Fix a number of minor issues w/ the armv5 tunings where DSP variants
were referenced but not defined.
Fix incorrect armv7 entries in armv7a.
Fix PACKAGE_EXTRA_ARCHS definitions inside of tune-cortexm3 and tune-cortexr4.
(From OE-Core rev: 0e71abea5458122188d5eddef2c17147f61ff895)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart
Saul Wold
Martin Jansa
Xiaofeng Yan
Lianhao Lu
Robert Yang
Zhai Edwin
Scott Garman
Joshua Lock
Paul Eggleton
Dexuan Cui
Stefan Herbrechtsmeier
Elizabeth Flanagan
Andreas Oberritter
Andrei Gherzan
Robert P. J. Day
Shane Wang
Dongxiao Xu
Mark Hatle