The ordering constrains on the urldata_init functions are not straight
forward. To avoid further problems, create a helper function to setup
the source revisions which the init functions can all at the appropriate
point.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a bug where ud.branches were being referenced before it was set by
the git fetcher when using AUTOREV. To do this some ordering needed
to be changed. This fixes errors like:
ERROR: Error parsing /recipes-kernel/linux/rt-tests_git.bb: Failure expanding variable
SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception
AttributeError: 'FetchData' object has no attribute 'branches'
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create the lockfile directory if it doesn't exist, rather than erroring out if
it doesn't exist (was also racy).
Also improve the wording of the error message shown when the lockfile's
directory is not writable.
Note for the future, this function should be improved, particularly with
regard to its exception handling. It should be catching the *exact*
exception(s) it will encounter when the file is locked, and continuing in that
case only. If it did that, there'd be no need for the proactive directory
writability check, as bb.utils.lockfile() would raise an appropriate IOError
for that case.
(Bitbake rev: 238151441c74db53d6e4d4753f4f96c32f6f13b6)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a build causes a real task to be run when the setscene task has already
run then it was possible for dependent packages to be rebuilding at the same
time as a rebuild of the packages they depended on, resulting in failures
when files were missing. This change looks in the setscene covered list and
removes anything where a dependency of the real task is going to be run (e.g.
do_install is going to be run even though the setscene equivalent of
do_populate_sysroot has already been run).
As an additional safeguard we also delete the stamp file for the setscene
task under these circumstances.
Fixes [YOCTO #792]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
This patch is a quick proof of concept to show how source code could
be shared between recipes which use ${B} to have a separate build
directory compared to source directory ${S}.
Issues:
a) gcc uses sed and creates config files against ${S} which means
the directory should not be shared. Need to change the way that works.
b) Could be extended to cover eglibc except there is a patch applied
against nativesdk versions which again makes the source incompatible.
c) Need to clean up the layout in work-shared and make a directory level deeper
to ensure patch separation.
d) clean task does not remove stamps
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix [BUGID #593]
The current manual build fails for printing formats which use latex as an
intermediate format. This bug has been reported in multiple locations and I
haven't found a solution posted to any of them.
Using --with-dblatex uses dblatex to make the conversion and successfully
generates the pdf. It adds a dependency on dblatex and its dependencies.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Joshua Lock <josh@linux.intel.com>
If a setscene task failed previously it was showing an incorrect task
name in the error line. This patch ensures we show the correct name, also
including the "_setscene" suffix.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Upstream have fixed the xmlrpclip.Transport() bug from Python #8194 for
the Python 2.7.2 release, therefore as we know which versions of the
standard library are affected we can only use our copy/paste class when
it's needed.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
This patch marks the bitbake-layers script as executable and fixes the
instantiation of the BBCooker to match recent changes in the BitBake
libraries.
I've also added a brief header which demonstrates the intent and usage
as taken from Chris Larson's original commit message.
Note: this fix is not upstreamable, it's only required in Poky because of an
outstanding difference between BitBake master and Poky's BitBake.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
An accidental logic inversion (aka thinko) had the cancel button only
cancel a build when the user didn't confirm the cancellation (i.e. clicked
no)...
Signed-off-by: Joshua Lock <josh@linux.intel.com>
With the current implementation, file:// urls as used by sstate don't access the
mirror code, breaking sstate mirror support. This change enables the usual
mirror handling. To do this, we remove the localfile special case, using the basename
paramemter instead. We also ensure the downloads directory is checked for files.
The drawback of this change is that file urls containing "*" globing require special
casing in the core.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* This patch fixes a cosmetic issue currently we get with master
WARNING: /home/kraj/work/bitbake/lib/bb/fetch2/__init__.py:733:
DeprecationWarning: Call to deprecated function bb.mkdirhier: Please use bb.utils.mkdirhier instead. bb.mkdirhier("%s/%s" % (rootdir, destdir))
(Bitbake rev: 36fe59ce314c295d239b76de34c8714def2c32d5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want this to ensure the user can run the run. script from anywhere.
(Bitbake rev: a600b79ecefc95eeb266c3f362c7160fa8c948c1)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Parsing the recipe in the parent before forking off the child worker
can mean the parent doesn't hit the idle loop and becomes a bottleneck
when lauching many short lived processes.
The reason we need this in the parent is to figure out the fakeroot
environmental options. To address this, add the fakeroot variables
to the cache and move recipe loadData into the child task.
For a poky-image-sato build this results in about a 2 minute speedup
(1.8%).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove a spurious signal emission which resulted in two progress dialogs
being shown after changing the machine.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
A file we're copying might be on a readonly filesystem so if we can already read
it, don't try and add read permission.
Fixes BUGID #771 in Yocto.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need this if we want to run the buildWorldTargetList function more than
once, for example in a UI where we can change the MACHINE and DISTRO as much
as we like before triggering a build.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
When we're running a long operation with indeterminate duration it's useful
to use the gtk.ProgressBar's pulse method to show that something is happening
but we don't know how long it will take.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Provide a gtk.ListStore subclass which includes a function,
populate(), which takes as input the data emitted by
bb.event.TargetsTreeGenerated and fills the ListStore model
appropriately.
Furthermore convenience functions are provided by which the caller can
get gtk.TreeModel subclasses which provide filtered views of the data.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Add summary, license and group metadata to RecipeInfo and the cache.
Unfortunately this impacts parse speed but gives us a much richer set of
metadata to expose through UI's which can be accessed via the
generateTargetsTree command.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Move runqueua and taskdata initialisation into a new function,
prepareTreeData(), so that generateDepTreeData() and
generateTargetsTreeData() are not duplicating the same logic.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
The generateTargetsTree() command needs to return a model which includes more
metadata than the one generated by generateDepTree().
This patch adds a new method generateTargetsTreeData() to the cooker, based
on generateDepData(), and switches generateTargetsTree() to use it.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Some configuration variables (MACHINE, MACHINE-SDK and DISTRO) set which
confguration files bitbake should use.
The added command , findConfigFiles, enables a UI to query which files are
suitable values for a specified parameter.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Add a new command generateTargetsTree() which returns a dependency tree of
possible targets (tasks and recipes) as well as their dependency information.
Optional parameter 'klass' also ensures any recipes which inherit the
specified class path (i.e. 'classes/image.bbclass') are included in the model
Signed-off-by: Joshua Lock <josh@linux.intel.com>
In the none server, events don't get processed unless the idle_commands
function gets called, which previously wasn't happening with getEvent();
thus UIs that use this to get events were not working.
Fixes [BUGID #561]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Remove some comments, imports etc. to do with XMLRPC (inherited from xmlrpc.py
which this file was based upon.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
If expanding a variable triggers an exception the caller currently has no
way to supress the error message or otherwise handle the siutation. An
example of where this is a problem is "bitbake -e" showing tracebacks and
errors for variables like SRCPV in OE/Poky.
Secondly in a chained expansion fails, log mesages are recorded for
every step of the expansion, not just the innermost error which is
where the real failure occured.
To fix this we introduce a new exception ExpansionError which callers
can handle as appropriate.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if a variable has been set with ??= and the code looks it up
before the data finalisation phase, no value is found. This is causes
serious problems for anonymous python functions which manipulate data, or
for the fetcher revision handling code where revisions can be set with
??=.
There is also a significant performance implication for processing lazy
assignment in finalise.
Moving the check for a default value into getVarFlag addresses both
the timing issue and the performace. This change gives a 7% real time
performance improvement to parsing the Poky metadata. The cost of the
check at this point is minimal since we have all the data flags available.
This should also fix Yocto bug 752.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When parsing if a SystemExit event is triggered, it causes the parsing thread to
exit and the main process hangs waiting for it to finish indefintely. Add code to
catch BaseExceptions and raise these with the main process gracefully instead
of just hanging indefinitely with zombie processes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids cases where the stats are modified after the event is fired but
before it's dispatched to the UI.
(Bitbake rev: 1954f182687a0bd429175dda87f05d8a94bb403a)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake/lib/bb/process.py:15: DeprecationWarning: BaseException.message has been deprecated as of Python 2.6
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This create a clean() method in each of the fetcher modules
and correctly cleans the .done stamp file and lock files
Signed-off-by: Saul Wold <sgw@linux.intel.com>
This allows fetching git repositories using Kerberos authentication.
(Bitbake rev: d761cf98284b02eb3d3a1f879782c501c284b698)
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use '==' instead of 'is', otherwise it will always return
true since 'rev' and "SRCREVINACTION" are not the same object.
(Bitbake rev: f30b3af975a071d1584817054a2996f08a3aba4f)
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I forgot that bin/bitbake is what does the environment filtering based upon
BB_ENV_WHITELIST, etc.
(Bitbake rev: 2cc6b6951bd17832866ec710029d119d2df31ba4)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use comments instead of docstrings where appropriate in CacheData.
(Bitbake rev: 088d516e02bb2b4ce8a50bbaa967e944c46e620b)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script has subcommands which operate against your bitbake layers, either
displaying useful information, or acting against them. Currently, it only
provides a show_appends command, which shows you what bbappends are in effect,
and warns you if you have appends which are not being utilized.
Currently, a bug exists when using this due to the DataContext stuff, but I'm
not certain as to the root cause, it appears to be the bb package relying
implicitly on the way the bitbake script does things. A fix for that issue
will be forthcoming, as will further subcommands.
(Bitbake rev: 78b6d4cb26cec3321f8eec9889205a6b93b2ee18)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable the fetcher to be able to unpack and SRPM. By default the system will
unpack the contents of the SRPM into the WORKDIR.
A new syntax "unpack=file" was developed for the SRC_URI, to allow for a
recipe to extract a specific file within an SRPM. An unpack operation will
then be executed on the extracted file.
In order to apply extracted patches (or unpack files not specified with
unpack), you must specify the path using WORKDIR, i.e.:
file://${WORKDIR}/mypatch.patch
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
See the problems in http://bugs.python.org/issue1692335, need to set self.args
correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop some old md5 functions since we have improved functionality now which includes
sha256 checksum support. This stops each download being md5 checksumed twice.
Also change ".md5" stamp extentions to ".done" to better describe its use as a
download complete marker file and no longer write the md5 sum to the files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We no longer need index/workdir support in the mirror tree and it causes all
kind of reference naming problems.Simplifying the code to remove this and use
just bare clones addresses this problem.
We increase the "version" number on the mirror tarballs to reflect the change
and ensure older mirror tarballs are not used as they would break.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since local mirror fetches are always symlinked from the download directory
directly, there is no need for this premirrors hack which doesn't cover
mirrors and also abuses the localpath variable with inconsistent results.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When files are fetched from a mirror source that happens to be local,
ensure links are created for the file since subsequent fetch calls
can then follow the links to find files.
Any other approach such as the existing manipulations of localpath
internally to the fetcher are prone to errors, races and other issues.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing a cvs SRC_URI to a file:// mirror, the user and host information
will break the mirror processing. This patch addresses it by only constructing
valid urls.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* SRC_URI format:
the SRC_URI are extended to allow multiple src rev:
name=<name1>,<name2>,...<name-n>
branch=<branch1>,<branch2>,...,<branch-n>
also SRCREV can be defined with
SRCREV_<name1> = xxxxx
SRCREV_<name2> = xxxxx
* FetchData extention
to support multiple src rev, several FetchData data are added:
- FetchData.names: list of name in SRC_URI, one name per srcrev. name is the index of revision and branch
- FetchData.revisions: dictionary of name->revision.
- FetchData.branches: dictionary of name->branch.
For example, linux-yocto recipes becomes:
SRC_URI = "git://git.pokylinux.org/linux-yocto-2.6.37;protocol=git;branch=${KBRANCH},meta;name=machine,meta"
FetchData.names = ['machine', 'meta']
FetchData.revisions = { 'machine':xxxxx, 'meta':xxxxxx }
FetchData.branches = { 'machine':${KBRANCH}, 'meta':'meta'}
* generic revision handling extension
the related revision handling code in fetch2.__init__.py are changed accordingly. the major change is add name parameter to indicate which src rev to handling. originally there is one src rev per FetchData, so FetchData parameter is enough. now since one FetchData has multiple src rev, it is necessary to use FetchData + name to specifiy src rev.
* git extension
git fetcher are also revised to take advantage of the multiple src rev in FetchData. especially the download() method are enhanced to fetch multiple src rev.
* other fetcher (svn, hg, ...) does not support multiple src rev. they just sync the API to add name, and then simply ignore the name. no actually functional change
Signed-off-by: Yu Ke <ke.yu@intel.com>
Since we're now always providing the git source control files it becomes
pointless to handle the tarballs of specific git revisions so drop this
part of the fetcher.
Signed-off-by: Yu Ke <ke.yu@intel.com>
The git download method clones the git repository to the local machine. The unpack process
can be optimised to be a local to local machine clone or a direct readtree operation to the
destination using git.will clone git repo to local, so git unpack can be simplified
to only checkouting the code to the work dir. For fullclone case, we also
need to manually copy all the ref info, which is needed by the later do_kernel_checkout().
Rather than use hardlinks, we reference the repository using alternatives since the
download directory may be on a different filesystem.
[Change to use -s by Richard Purdie]
Signed-off-by: Yu Ke <ke.yu@intel.com>
The server UI was reading 1024 bytes, then sleeping for 0.25 seconds. Since
most new LogRecord events are larger than this it leads to a build up of data
which is only processed slowly, leading to a bottleneck and a slow down of
all bitbake processes.
Thanks to Dongxiao Xu <dongxiao.xu@intel.com> for the great work in debugging
this. A large value has been left in for the read() command just to ensure some
fairness amongst process handling if a task tries to log truly huge amounts of
data to the server, or goes crazy and ensures the main loop doesn't stall.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometime user want a purely local fetching, i.e. using local mirror without
any remote netowrk access. BB_NO_NETWORK option is introduced for this purpose
check_network_access() is the guard for BB_NO_NETWOKR option. it should be
put in any place that fetcher use network access
Signed-off-by: Yu Ke <ke.yu@intel.com>
Richard Purdie
Darren Hart
Chris Larson
Paul Eggleton
Joshua Lock
Khem Raj
Mark Hatle
Saul Wold
Javier Martin
Yu Ke