This will allow gconftool-2 to run when configuration source addresses
contain the '+' sign.
[YOCTO #3893]
(From OE-Core rev: 5ba4d947189f76692ea6cc75500d9295417a2055)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using an initramfs, the default for poky-tiny, the kernel can't
automatically mount devtmpfs. Ensure it is mounted. This eliminates the
need to create the ptmx device.
(From meta-yocto rev: b0ae9ca7078ec57fe21ccd8a14302a075ca07aa3)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Atom-pc missed the kernel refresh last time around. 3.0 is on its way
out. Set the PREFERRED_PROVIDER to 3.4.
Boot tested on a Toshiba NB-305 using core-image-minimal.
(From meta-yocto rev: 5457e02d896f62d8b2e94be071083770a97dd38b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3870] atom-pc - cannot boot image on netbook after install
The problem here is that grub2 is installed but a grub 1 menu.lst is
created at install time. At boot, grub2 doesn't find a grub.cfg file and
drops to the grub shell.
This happens because the installer is looking for 40_custom (a grub2
file) on the rootfs, but grub2 isn't installed on the rootfs. It exists
in the initramfs. Patching the installer to look on the initramfs
resolves the problem.
Note that the problem may have occurred if grub2 used to be installed on
the rootfs but was later removed. In any case, the installer is HORRIBLE
and really needs to be completely redesigned as part of the deployment
effort. For now, this should get the live image installer limping along
again.
Tested on a Toshiba NB-305.
(From OE-Core rev: 8756a19bd24045d41ad20abb581e7872d0fc9ee6)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: alexandru.c.georgescu@intel.com
Cc: sgw@linux.intel.com
Cc: ross.burton@intel.com
Cc: richard.purdie@intel.com
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ CQID: WIND00404082 ]
It is possible for the TARGET_OS to change dependending on the multilib used
for a given package build. mips64 has two potential TARGET_OS values: linux
and linux-gnun32. The RPM and Smart setup needs to distinguish between the
two otherwise packages of the "non-default" TARGET_OS may be ignored as
incompatible.
(From OE-Core rev: aa760ff7dee4029c30c9de9fc0b640149e4a4c77)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
external-python-tarball only can be built when inherit package_ipk now.
Update it to reuse existed populate sdk code that it could be built for
rpm and deb too.
Remove var DEPENDS, SDK_* and flags of do_populate_sdk because they are
already defined in populate_sdk bbclasses.
[Yocto 3006]
(From OE-Core rev: 57134958a2c6b74de8654600e33acdd265966638)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to generate new disk images for ext(2,3,4) which contain root
file systems we do not want to rely on the host's genext2fs which may
have different arguments and features, so allow the nativesdk
genext2fs binary to be built.
(From OE-Core rev: b9eac9683baaeb458d70a5089cbb5e2b8149eb26)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ CQID: WIND00402802 ]
Remove the wildcard from the SRC_URI. This causes problems when you .bbappend
and add a FILESEXTRAPATHS entry. The unpack task may be unable to find the
files to unpack leading to an error.
Avoid wildcards at all costs...
Note, remove both man-1.5m2-multiple.patch and man-1.6e-lzma+xz-support.patch,
they were not being applied in the previous version. The later also fails to
apply when added to the SRC_URI.
(From OE-Core rev: 61b60906b2825d4f9ea1f5ae11e1f9fcc77ac4e7)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ YOCTO #3915 ]
[ CQID: WIND00404309 ]
When doing a multilib image build, such as bitbake lib32-core-image-sato, the
system needs to reorder the priority level of the feeds. If it does not
reorder the priorities, then 64-bit items can be selected by the automatic
dependency resolution in Smart.
(From OE-Core rev: dfbb1aa184955923b85b81aabf944de8f1a1e4b5)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create files `passwd' and `group' in `$D${sysconfdir}', if `$D${sysconfdir}'
does not exist, there is an error:
...
cannot create $D${sysconfdir}/passwd: Directory nonexistent
cannot create $D${sysconfdir}/group: Directory nonexistent
...
Attampt to create dir before file creation.
[YOCTO #3917]
(From OE-Core rev: aea1d6c29e0c3f7c854045057d8bb389a1609b2b)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The idea of a generic xorg.conf is meaningless, especially when they specify the
"intel" driver. Empty this file so that unless the BSP specifies it's own
xorg.conf, no xorg.conf file is installed.
(From OE-Core rev: 746b6e90a8403886e6957d33610bbda115de0a0c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many hardware platforms can autodetect their hardware and don't need a xorg.conf
at all. Make it easy for BSPs to not ship a xorg.conf by not installing empty
xorg.conf files.
(From OE-Core rev: 4b46149df5f123c7acf4699dbc552cc0e07f709a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dpkg-deb verifies that conffiles exist, so verify that the specified files
actually exist before writing them to conffiles.
This mirrors the behaviour of FILES and package_rpm's CONFFILES handling.
(From OE-Core rev: 767a3d1c45f97add720174a7034df750bfb09a8e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/etc/default/rcS might be missing if the init manager is not sysvinit.
So we have to check for the existence of this file before sourcing it.
[YOCTO #3697]
(From OE-Core rev: 416519ec595f59ebeafb95bed2546635cad41559)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added notes, signoff, and upstream status to internal patch.
(From OE-Core rev: 76cebb57d3ce507e3876e0a9a881eaa3e8c6fdb8)
Signed-off-by: Jeremy Stashluk <jstashluk@dekaresearch.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0001-Add-missing-argument-to-escape.patch: removed
- included in the new version
remove-gets.patch: not needed anymore
add-missing-argz-conditional.patch: added
- the Makefiles assume that the argz conditional
is present in configure.ac
(From OE-Core rev: a711a8617c39b06c9a494d0ceae9f96f65b024f9)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ARM Neon instruction set compilation error fixed.
Build system disables Neon optimisations if
ARM target does not support it.
BT support dependent on bluez and sbc support.
sbc package added as a dependency.
(From OE-Core rev: 4e7b91b5a2613b957b08aefbee1aac28fdd19598)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- gnome-common finally is GPLv2+
- omf.patch is included in the new version
(From OE-Core rev: dba2105d2f6f5788d8f827edad4e8c601a409d1f)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- obsolete_automake_macros.patch removed as it's part of upstream.
- dont_override_ac_config_macro_dir.patch removed as no longer needed.
- pkgconfig_fix.patch updated to apply cleanly
(From OE-Core rev: b0c541236b4c4670ce77f55886b6ce02c562b8c2)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.
(From OE-Core rev: 254799258ead1b7a59c301ad2d3e3c7e5b9fb8db)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The only new commit this pulls fixes build with automake-1.13.
(From OE-Core rev: 86284e488a984ee161af75bee30440b827bd72c9)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.
(From OE-Core rev: fd3586cfa620299ba2544ce16e140956b5171ae5)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the formfactor says we have no physical keyboard, add the keyboard applet so
the user can force the keyboard to show/hide on demand.
(From OE-Core rev: a0bca3dc35db1a8fbc49fa4e3884c2365353b9c1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The keyboard is more useful with the applet, as it means that you can hide it.
(From OE-Core rev: b6ea5818314d6de3a68df455e462f98f06cfd860)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In pakcage.bbclass,function replace('-dev', '') is
used to cut '-dev' suffix. but it will cause the
name "lib32-device-dev" to "lib32ice",
so change it to [:-4].
(From OE-Core rev: 91a3a48798029ca88a46a528200f4c5252f245e9)
Signed-off-by: Song.Li <Song.Li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The stamp cleaning process that occurs before writing out new stamps for
a task was deleting taint files as well. This resulted in tasks that
were forcibly re-executed using the -f or -C command line options to
have their previous output restored from shared state when called upon a
second time, because the taint value was no longer incorporated into the
task signature and thus it was reverting to its previous value. This
also affected the kernel menuconfig command in OE-Core.
Note that the taint file *is* still deleted when doing -c clean, which
is the desired behaviour.
Fixes [YOCTO #3919].
(Bitbake rev: e6db0ee31178d4386802e720d75303ec7dc21519)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 21fe2683aefde10e847e66c11c26d4f4c1e07cfd
since bitbake-selftest doesn't pass when this is applied and
we're seeing multiple build failures from this change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If multiple versions of the same package are in the package feed then the
generate status file would only contains a "deinstall" status for the last one,
which meant that BAD_RECOMMENDATIONS wouldn't actually work.
Use awk instead of grep and stop reading when we reach a newline, so we only
ever output a single stanza.
(From OE-Core rev: a5362de60c0051f16b88a40bd9cb41915bee0b0f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When relocating the SDK, applications using python will search for
python modules in the default location and will fail to start.
The below errors are thrown by gdb, for example:
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
ImportError: No module named site
In order to overcome this, add the PYTHONHOME variable to the
environment-setup script for both standalone toolchain and
adt-installer. No need to do that for meta-ide-support environment
script since this toolchain does not get relocated.
[YOCTO #3839]
(From OE-Core rev: e7a21cd69a326ab7e2d0e410db28f24956f61208)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the remove function to better handle cases where path contains
special shell chars like whitespaces, '$', ';' or'\'.
Thanks to Enrico Scholz for the fix.
(Bitbake rev: 617511c9f86cc4ef52457653c8adff582d94bce3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there there isn't a subdirectory to the downloadfilename, this was
failing. This patch avoids that issue.
(Bitbake rev: 58bfd8d88495d4cae808e23b7af40e65ad05450f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoid a libx11 dependency for nativesdk as it is not intended to
be run in the toolchain. We also remove the dbus-launch as without x11
support it might case trouble for user
(From OE-Core rev: 2dcb6bf9205a5b2144ccb7f2912bf3e13211ae88)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently its hard to run a devshell complete with fakeroot context. This
patch allows the fakeroot flag on the task to do this, as with any other
task. Since we may need to start X terminal applications, we need to
only start the fakeroot session on the final command, hence the hoops
this code jumps through.
As always with fakeroot, you can break out and run a command without
the fake permissions with syntax like "PSEUDO_UNLOAD=1 <command>"
[YOCTO #3374]
(From OE-Core rev: 0a2662a48eaf0487db043c348e2834bb9cdd0466)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Laurentiu Palcu
Darren Hart
Mark Hatle
Emilia Ciobanu
Kang Kai
Jason Wessel
Anders Roxell
Cristian Iorga
Hongxu Jia
Ross Burton
Chen Qi
Björn Stenberg
Jeremy Stashluk
Constantin Musca
Saul Wold
Marko Lindqvist
Song.Li
Paul Eggleton
Matthew McClintock
Christopher Larson
Otavio Salvador