When using OpenEmbedded and Yocto I had it previously set to OE and
this made bitbake to get confused. This was difficult to figure out
and then it seems safer and cleaner if the script unset it to avoid
this confusing behaviour.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Keep the la files in source directories unchanged,
and do relocation in destination directories (sysroot-destdir).
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
{e}glibc should install the scsi/*.h files, which are needed by hal.
Currently hal can build because eglibc-initial (which has its own do_install)
installs the files. In future eglibc will have its own sysroot, so hal
won't build.
BTW: in OE side, eglibc's do_install also doesn't remove the files.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Currently gcc-runtime installs the files, but actually gcc-runtime's
do_configure checks if the files are available, so before we build gcc-runtime,
we should have some recipe install the files first! -- currently
gcc-cross-intermediate actually does that(gcc-cross also installs the files,
but it installs into the gcc-build-internal* directory), but
gcc-cross-intermediate will have its own sysroot in future, after that,
gcc-runtime won't build. So let us add this new target recipe and move the
installation of the files from gcc-runtime into it.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
The switch to KARCH meant that the arch arm settings were not
being applied to all boards. This commit adds the new option
along with the existing one to cover all boards.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the SRCREV to capture this commit to the 2.6.34 kernel:
linux-2.6-windriver: atom-pc-preempt_rt meta-data
The following patch adds support for the preempt_rt kernel type
for the atom-pc machine. It should be applied to the wrs_meta
branch.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Enable the parameters required for systemtap for all BSPs based
off the standard kernel type.
CONFIG_KPROBES=y
CONFIG_RELAY=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
ExtUtils::Embed ccopts is getting the host's -I/usr/local/include and
using it to compile perf, which results in a compilation error that
started appearing just recently.
This turns the code that makes use of ExtUtils::Embed off and simply
hard-codes NO_LIBPERL.
It does the same for LIBPYTHON while we're at it, since it probably
suffers from a similar underlying problem and just by chance hasn't
broken anything yet.
This will be re-enabled after I familiarize myself with the perf
recipe and am able to create a proper fix.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Fixes [BUGID #595]
Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder
may suffer a timeout issue when running sanity test. We introduce variable
SHARE_IMAGE here to fix the issue. It is by default set to 1. Poky will copy
latest built-out image and keep using it in sanity testing. If it is set to 0,
latest built-out image will be copied and tested for each case, which will take
much time.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
PACKAGE_ARCHS represents all compatible architectures for a given machine.
It makes no sense for this variable to change any task checksums as it doesn't
inject any machine dependency into any known task. Multimachine means machine
specific packages will be detected through other variables.
Before this patch, even native packaging tasks were ending up being marked as
machine specific.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Even when a variable was whitelisted, any dependencies of that variable
could still creep into the task hash due to the way the whitelisting
code worked. This patch changes thing to ensure that when whitelisted,
that whitelisting applies to the variable and any dependencies it has.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes 'kernel-modules' installable again when perf isn't enabled in the kernel config
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We had a logic inversion that meant we where dropping quite a
significant number of events on the floor.... Fixed!
Signed-off-by: Joshua Lock <josh@linux.intel.com>
It's unlikely that someone wants to close the progress dialog
yet leave the UI (and BitBake process) running, so hook up
the progress dialogs delete-event to exit gtk.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
The recent change to Queue up events before the UI is spawned (in
26eda93337) broke the xmlrpc server because the
uievent implementation of BBUIEventQueue expects pickled strings for its
queue_event() method.
This is because the RPC exposed event.send() method must accept pickled
strings, but for xmlrpc event.send() is just mapped to queue_event().
Work around this by adding a send_event method which unpickles strings and
hands them off to queue_event() which can then be used for the remapping.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
The recipe was unsetting LDFLAGS, resulting in:
NOTE: QA Issue: No GNU_HASH in the elf binary: '/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/wpa-supplicant-0.7.3-r0/packages-split/wpa-supplicant/usr/sbin/wpa_supplicant'
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
bbvars.py will compare recipes in meta directories with documentation files
and report on variables that don't appear to be documented. It reports the
number of times a variable is used as well as any doctags present in the
documentation config file.
The output of this is intended to aid in determining where documentation may
be lacking, but it is not perfect, and does generate some false positives. An
experienced eye and careful attention to count and doctag should be applied to
the results.
$ ./bbvars.py -d ../../documentation/poky-ref-manual/poky-ref-manual.html -m ../../meta -t ../../meta/conf/documentation.conf -T | head -n 10
Found 1413 undocumented bb variables (out of 1578):
VARIABLE COUNT DOCTAG
===================================================
BUILD_ARCH 4 The name of the building architecture. E.g. i686.
BUILD_CC_ARCH 2 FIXME
BUILD_PREFIX 4 FIXME
BUILD_SYS 13 FIXME
BUILD_VENDOR 2 FIXME
CACHE 1 The directory holding the cache of the metadata.
COMPATIBLE_HOST 19 A regular expression which matches the HOST_SYS names supported by the package/file. Failure to match will cause the file to be skipped by the parser.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
The routerstation pro and mpc8315e-rdb have been validated
on 2.6.37 so we can switch their preference to linux-yocto
and update the machine compatibility to add them to the support
list.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Upgrade to 6c696cec3f264a9399241b6e648f58bc97117d49 which
includes fixes to the Makefile to allow for user override of
CC and AR via the environment as well as python SWIG wrapper
fixes.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
for hostperl needing to load .so files (for module scalar::util) the host/native
perl library path is placed 1st in the @INC with the -I parameter to perl.
Otherwise hostperl gives error can not load module scalar::util.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
We use host perl while building target perl modules. When some of the
prebuilt perl modules such as scalar::util are used in the build process
directly or indirectly, perl needs to load the arch specific .so library
file. If perl can not find the .so library files, then perl
tries to use the target pm files which ends up in circular perl module
depedancy causing build time perl invocation to fail.
Adding this new parameter viz EXTRA_PERLFLAGS to cpan.bbclass allows perl
module recipes to specify the location of such host .so files for hostperl,
so that build time invocation of perl does not fail.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
perl 5.12.2 does not use /usr/share/perl path, and all that stuff goes
in /usr/lib/perl. This commit fixes cpan class which depends on
/usr/share/perl.
cpan.base/build.bbclass: change /usr/lib/perl5 to /usr/lib/perl
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Deleted these patches as they are part of the upstream code now.
deleted: files/perl-5.8.8-gcc-4.2.patch
deleted: perl-5.12.2/makedepend-dash.patch
deleted: perl-5.12.2/native-no-gdbminc.patch
deleted: perl-5.12.2/54_debian_perldoc-r.patch
And rebased these patches to the newer source code
modified: files/letgcc-find-errno.patch
modified: perl-5.12.2/Makefile.patch
modified: perl-5.12.2/asm-pageh-fix.patch
modified: perl-5.12.2/native-nopacklist.patch
modified: perl-5.12.2/native-perlinc.patch
modified: perl-5.12.2/Makefile.SH.patch
modified: perl-5.12.2/installperl.patch
modified: perl-5.12.2/perl-dynloader.patch
modified: perl-5.12.2/09_fix_installperl.patch
get patches from debian perl ver 5.12.2-2
the fakeroot.diff patch from debian is conflicting with our
Makefile.SH.patch, hence disabling the fakeroot patch
use newly created config files
Created with current milestone branch on qemu machines
modified: config.sh
modified: config.sh-32
modified: config.sh-64
get some changes from oe's perl 5.10.1 recipe
fix the Makefile.SH.patch use miniperl instead of perl
import a OE 5.10.1 patch: uudmap_cross
fix install issues
add /usr in the destdir, so that perl gets installed in
/usr/bin/perl and not in /bin/perl
link /usr/lib/perl to /usr/lib/perl5 so that operations with
/usr/lib/perl path in them keep on working.
Fix/Improve perl packaging
avoid perl-module-module-* kind of packages
recreate perl-rdepends_5.12.2.inc file with new set of packages
import from oe perl-rprovide_5.12.2.inc
combine all unicore perl scripts in one package
simplify perl-lib
reduce no of perl recipe packages greatly.
Add zlib to depedancy
fix buildtime host contamination
This also fixes [BUGID #384]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Otavio Salvador
Richard Purdie
Dongxiao Xu
Dexuan Cui
Bruce Ashfield
Tom Zanussi
Saul Wold
Jiajun Xu
Koen Kooi
Bernhard Reutner-Fischer
Beth Flanagan
Joshua Lock
Lianhao Lu
Darren Hart
Liping Ke
Nitin A Kamble
Chris Larson