Closes [YOCTO #1203]
Using the hard floating point abi is incompatible with some binary libaries and
3D support for the Beagleboard. While we do not provide these in poky and
meta-yocto, softfp should remain the default for compatibility reasons.
Provide documentation and a commented assignment to DEFAULT_TUNE instructing
how to enable hardfp, but leave it disabled by default.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The emenlow BSP is now contained in the meta-intel layer.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1400]
By using the included libxml and libcroco, we do not create additional
on this core library. There was an ordering issue that when one library
was not built, but gettext detected the other library a compliation would
fail, this will force it to always use the included libraries.
(From OE-Core rev: 0c12210f63f9705af98bcf5de8ccd715026bace3)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1381]
This patch came from from GCC Bugzilla via Khem
Cc: Khem Raj <raj.khem@gmail.com>
(From OE-Core rev: 61dac2f6f68bc46d8f3f6f7a8757924f103c7c54)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Qt" is correct according to the documentation.
(From OE-Core rev: 429be858090d1c40589cb269a70ed1515119ac1f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If DISTRO has been specified, ensure it is valid. (Unset or empty string
is valid for DISTRO in OE-core by the use of defaultsetup.conf.)
(From OE-Core rev: 895aa6b8ee9636a9f9d716c62c0adf951e1ff138)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you do not have debug-tweaks in IMAGE_FEATURES, then zap the root
password so that you can't log in as root without a password in an image
potentially intended for a production system.
Also mention debug-tweaks in the comments listing IMAGE_FEATURES in this
file.
(From OE-Core rev: 5ddda44efc97b4d6cf863033348e57e5cfdcd392)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hal may need some kernel headers, thus we need virtual/kernel as its
dependency.
(From OE-Core rev: b5db50e280e2547f5428440be5446c4ad267aeef)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel should be unique in a multilib system, so we remove the
linux-yocto's extension in multilib.conf
(From OE-Core rev: db78d1289705a38f0069f84101296e9309d67fa3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake would report failed dependency of kernel-module-* when testing
multilib. kernel-module-* are recommended by some other recipes.
Do not extend name for kernel-module-* related packages.
[YOCTO #1456]
(From OE-Core rev: 30ac343888dc801614922045b374537c6c54f312)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
telepathy-python install fails on latest Fedora 16 due to the tighter
check of duplicated file installation.
Remove one errors.py entry in Makefile.am to fix this issue.
[YOCTO #1453]
(From OE-Core rev: d84fd7c1e90f080ea0c702cba9a9f81a2c465ee6)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1374] - Fixes underlying issue
[YOCTO #1331] - Detects bad GNU_HASH tables
Update to the latest upstream version. This includes a number of
generic fixes, as well as a complete refresh of the prelink-rtld.
(Prelink-rtld is similar to the ld.so/ldd functionality on a normal
system.)
The new prelink-rtld update syncs to eglibc-2.13 and enables new
symbol resolution, include GNU_UNIQUE, that was causing problems on
x86_64 and potentially other architectures with C++.
An assert has been added to also detect a bad GNU_HASH situation
which was detected on some PPC64 systems. The underlying problem is
within the toolchain, however prelink was making it worse leaving the
problem undetected.
(From OE-Core rev: 4f401134694bbc1de532aaaab6c9a761649725a1)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently configure is looking whether the build system has certificates
to determine the certificate paths. This is clear contamination so
this patch disables that functionality to ensure builds are consistent.
We could equally set this option to a consistent path if we start
installing certificates.
[YOCTO #1451]
(From OE-Core rev: 658887961dbb1eea17d9a1ceeef4fe38cb8c33ba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the stderr msgs go into log.do_rootfs and can cause a fatal failure
in "log_check rootfs".
However, the err msg could be spurious since we *only attempt* to install the
the packages, which may not exist actually. E.g., without this patch, we can
get a fatal ERROR due to
E: Couldn't find package task-core-tools-dev.
(From OE-Core rev: 5f00bda874ccaebdb00714b5cb5227462d43f8fb)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
USB HID like touch screen could be presented as hidraw* device, this change
make user under rootless X can access them.
(From OE-Core rev: ddb54d4a467b51f5f8f305f532bd5ea64df92876)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1428]
Because the underlying grub 0.97 the initramfs-live-install RDEPDNEDS on
only supports 32bit x86 target, set the COMPATIBLE_HOST accordingly.
(From OE-Core rev: d128b4f2746ee8525352ce982a9c2a5e422630f2)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mtd-utils 1.4.6 is the lastest release of mtd-utils
at this time.
(From OE-Core rev: e43bec6c7dce3c6f9af5a0c5b7e5c6f740f89996)
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows pango to be installed in an image with read-only-rootfs.
(From OE-Core rev: 62381fd3a135318794f14dc3740b04facd32446e)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upating the meta data and machine branch contents with the up
to date merge of utrace.
(From OE-Core rev: cb8efc0e1ec00892b46325aabfb1b4020a46c078)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[
Author: Tom Zanussi <tom.zanussi@intel.com>
Date: Fri Sep 2 23:45:12 2011 -0500
meta: re-enable systemtap feature for linux-yocto
Re-enable the 'systemtap feature' that turns on the kernel options required
for systemtap, a system-wide tracing tool.
(From OE-Core rev: fdaaddbf2a673c7030c3e15e2f65cb13af3db720)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
icu-3.6 buildsystem contains small problem which causes some parallel
builds to fail. Fix that.
(From OE-Core rev: 41b7c955cfdc7b4d5c667c8a8742237d5edaca4f)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qt-demo-init initscript lacks some quotes, which makes it bave not fulle
correct. Fix that.
(From OE-Core rev: 84395cd31afd78a84d82a80297fe06f10406d57b)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without that commit ubinize.cfg lack a volume name value,
and the related ubinize.cfg line looks like that:
vol_name=
which result in a broken ubi image,which after beeing flashed produce
the following error:
UBI error: vtbl_check: volume table check failed: record 0, error 11
wich result in a kernel panic because the rootfs can't be mounted.
[RP: Moved from bitbake.conf to the .bbclass file]
(From OE-Core rev: 534dcaba0517ebfb6e48b6b436960a74e642a556)
Signed-off-by: Denis Carikli <denis@eukrea.com>
Acked-by: Anders Darander <anders@chargestorm.se>
Acked-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the wrapper script needs to build pseudo before we can launch hob we need
to notify the user so they aren't shocked by the action of launching a GUI
and seeing a bunch of text whiz by on the console.
Fixes [YOCTO #1435]
(From OE-Core rev: a160f4dd48b91c5e6f8c290c7572e29a39a3e693)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hob now uses both a pre and post file, update the wrapper script to generate
and use both of these.
Addresses [YOCTO #1281]
(From OE-Core rev: b68f90b765e7c8923033ee7ff7746f39a2e91ff7)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #940]
Since v3.0.4 is likely the last stable update in the the release
timeframe a configuration audit was performed. This updates the
SRCREV to remove obselete, and improperly defined configuration
items. With this, all qemu* BSPs configure with no warnings.
(From OE-Core rev: d19eaf7ca92c6632d42d12120800028f77ef21aa)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The v3.0.4 stable kernel is available and it can now be merged
into linux-yocto. Build and boot tested on all qemu* machines.
(From OE-Core rev: 0f3750ee83b8fe012cced2e376ec780a6e7f189b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After constructing a kernel configuration file it then needs
to be located in the tree so it can be audited against the
final .config. The previous string that was used for the search
pattern contains the kernel version. If the recipe space kernel
version and internal tree version are out of sync, this will
cause the constructed config to not be found. By removing the
version from the search string, we can still find out config and
gracefully adapt to minor version skew.
(From OE-Core rev: f072ddc43828ebe8df4dd7433726775dd547580b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently image_types.bbclass uses deploy/images/${MACHINE}tpm.gz dir for
temporary files when generating extX.gz images. This can lead to races
and strange errors during image generation. To overcome this use
deploy/images/${MACHINE}tpm.gz-${PN} dir for temporary files.
(From OE-Core rev: 3016f8f13e86034cc1c5686fc01a3bf39eb33d79)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old manner of specifying custom options to QEMU in this script
using angle brackets was a frequent source of confusion. Meanwhile,
Otavio Salvador added a decent method of specifying custom kernel
boot options to this script. This patch documents the bootparams
option and adds a similar way of specifying custom QEMU options
using qemuparams="".
This fixes [YOCTO #1019]
(From OE-Core rev: 1038df14a96d789b3f9e9e1692305ba1fea67886)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemtap now works with arm, so include it in task-core-tools-profile
for qemuarm.
(From OE-Core rev: 69a776eab96776ab33191cd6eeda4560e3f3f357)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also enable for arm, since systemtap now works on arm and remove the
gcc-4.6 compile fix patch since the problems it addresses have been
fixed upstream.
(From OE-Core rev: 09fa8e139b0c06f961927ac192d644bebdf31abf)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"/bin/sh" is needed by qt4e-demo-image, So I add busybox for fixing this problem.
[YOCTO #999]
(From OE-Core rev: 5f06d5012bfa8b2bd83092e41ab29babdfd4605e)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a wrapper for git to set GIT_EXEC_PATH and GIT_TEMPLATE_DIR so
that git-native is relocatable.
Fixes specific example given in [YOCTO #1137]
(From OE-Core rev: 9a3e25b5a3aa5e3b6ba543c4f789f66b240b38a7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OpenEmbedded is expecting to get a string from get_taskhash, but noop siggen
returns just 0 (number), so OE classes/sstate.bbclass barfs badly. Fix that.
(Bitbake rev: 24272dae15ccf641ece11ef5a6e2bfa3ebb6f5f9)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some internal lists were not being cleared, resulting in incorrect
program flow on the second build, causing a structure to be accessed
incorrectly which resulted in a segfault.
Fixes [YOCTO #1332]
(Bitbake rev: 71ac7fda51ed80e9ef6d1a3bca653683893e4770)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you don't clear out files_to_clean after the files get deleted and
then you run a second build, it will try to delete the files from the
first build and you will get a "No such file or directory" error.
(Bitbake rev: 069d85cde01d14f8da31ad5cbd843a4d99628d42)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's felt that the stability of package deselection is not sufficient for
the upcoming release and thus package removal should be disabled.
I'd actually like to see this patch, or its effects, reverted as soon as
the release bits have been frozen so that this issue can continue to be
worked on.
(Bitbake rev: 73b6ff4654d10baae59d83e8568d58d989e99dd7)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The buildstats handler causes an exception with: "'NoneType' object has no
attribute 'startswith'" early a build via hob, leaving a glaring red row
which means nothing to the user.
Mask this error until such a time as we have opportunity to correctly
diagnose and fix the root problem.
Workaround fix for [YOCTO #1433]
(Bitbake rev: b0cce5b52a20c0dad5ec0c4053f437cae89b6137)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The generic meta-toolchain-sdk we are currently building when this option
is enabled is likely unsuitable for the majority of images built with hob.
Remove this option from the Preferences UI until such a time as we can
correctly implement this feature to include the library headers for the
selected packages.
Addresses [YOCTO #1302]
(Bitbake rev: 3157967d08266b8d1ac563ba609ac3027b60d040)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hob requires pre and post configuration files to store configuration values
in, whilst this should (and will) be fixed long-term for so long as we
require these files we should alert the user should they run without them.
Fixes [YOCTO #1383]
(Bitbake rev: bb3e9113074ea1254aa03a247a1a1070682df9c8)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If no value is set for DISTRO the defaultsetup policy is used, reflect this
in the UI by having defaultsetup selected in the Distribution combo when no
other DISTRO is set.
(Bitbake rev: 126267c545ede65042959d134ea75c0345577747)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to set various variables *before* parse begins, the simplest way
to ensure this is to use a pre configuration file for the relevant
configuration entries.
This series adapts hob to use both pre and post files to store its
configuration. Any variables which affect initial parse are set in the pre
file and all others in the post file.
Unfortunately this requires hob related code to have even more hard-coded
data as to what is relevant but this is the simplest way to solve issues
with variables and parse order at this time.
Addresses [YOCTO #1281]
(Bitbake rev: 02ab0e11d8dd42f5ca440b3d8d2073e23f55113a)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kernel SRCREVs to pickup the latest meta and BSP
changes.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1440]
This fixes a problem where the native nsgmls has a path hard coded into
it, therefor add a wrapper to set the environment with the correct
paths for catalog files.
(From OE-Core rev: ce236234831ebc05ffdf1e0a368692ac2818a388)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart
Saul Wold
Paul Eggleton
Dongxiao Xu
Mark Hatle
Richard Purdie
Dexuan Cui
Denis Carikli
Zhai Edwin
Lianhao Lu
Phil Blundell
Bruce Ashfield
Dmitry Eremin-Solenikov
Joshua Lock
Scott Garman
Tom Zanussi
Xiaofeng Yan