Add config sample for disk space monitoring to
meta-yocto/conf/local.conf.sample
[YOCTO #1589]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Monitor disk availability and take action when the free disk space or
amount of free inode is running low, it is enabled when BB_DISKMON_DIRS
is set.
* Variable meanings(from meta-yocto/conf/local.conf.sample):
# Set the directories to monitor for disk usage, if more than one
# directories are mounted in the same device, then only one directory
# would be monitored since the monitor is based on the device.
# The format is:
# "action,directory,minimum_space,minimum_free_inode"
#
# The "action" must be set and should be one of:
# ABORT: Immediately abort
# STOPTASKS: The new tasks can't be executed any more, will stop the build
# when the running tasks have been done.
# WARN: show warnings (see BB_DISKMON_WARNINTERVAL for more information)
#
# The "directory" must be set, any directory is OK.
#
# Either "minimum_space" or "minimum_free_inode" (or both of them)
# should be set, otherwise the monitor would not be enabled,
# the unit can be G, M, K or none, but do NOT use GB, MB or KB
# (B is not needed).
#BB_DISKMON_DIRS = "STOPTASKS,${TMPDIR},1G,100K WARN,${SSTATE_DIR},1G,100K"
#
# Set disk space and inode interval (only works when the action is "WARN",
# the unit can be G, M, or K, but do NOT use the GB, MB or KB
# (B is not needed), the format is:
# "disk_space_interval, disk_inode_interval", the default value is
# "50M,5K" which means that it would warn when the free space is
# lower than the minimum space(or inode), and would repeat the action
# when the disk space reduces 50M (or the amount of inode reduces 5k)
# again.
#BB_DISKMON_WARNINTERVAL = "50M,5K"
[YOCTO #1589]
(Bitbake rev: 4d173d441d2beb8e6492b6b1842682f8cf32e6cc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we call finish_now(True), rq.state is not updated to match. This
makes the behaviour of finish_now(False) and finish_now(True) consistent
so both leave rq.state consistently.
(Bitbake rev: 9079ae0ab74f9232b7e9853b2013b051d4fcf623)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python support is needed for providing finer scripting control
in gdb, and for remote controling gdb for example from qtcreator
* gdb/configure tries to autodetect python using python executable
with --includes --ldflags --exec-prefix to get the right flags
As it's difficult to achieve in OE's context, we generate a
script which will return the right values and make gdb's build
system happy. This idea was taken from the following article :
http://www.mentby.com/doug-evans-2/python-enabled-gdb-on-windows-and-relocation.html
* tested using angstrom & armv7 target & qtcreator 201005 & 2.4.0
* MJ: updated paths to python as disscussed here
http://lists.linuxtogo.org/pipermail/openembedded-core/2012-February/018222.html
now it's easier with cross-canadian staging dir and SDKPATH fixed :)
(From OE-Core rev: 73a90b88541c373aa5b83a939dd3b5f1fe05b9b8)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Cc: fcooper@ti.com
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* SDKPATH shouldn't depend on TARGET_ARCH as discused here:
http://lists.linuxtogo.org/pipermail/openembedded-core/2012-February/018222.html
* introduce SDK_NAME_PREFIX so that distributions can overwrite only
this instead of whole SDK_NAME
(From OE-Core rev: 54821d53f75eb31f1eca3809e674680316dcbf69)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* some people prefer subdirectory like ${TMPDIR}/cooker/${DATETIME}.log
(From OE-Core rev: d3a06178202c65ce52ea8ad7af5b72ed5c0881d4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As reported by Martin Jansa, the path to nativesdk sysroot was changing between
nativesdk and cross-canadian recipes. The problem was the incorrect deinfition of
STAGING_DIR_HOST in cross-canadian.bbclass.
Since nothing really uses the cross-canadian output in the sysroot, only the
packages, its not surprising this bug has gone un-noticed.
(From OE-Core rev: 8c6966cb8e353dc28819419ea7e395fb0d5f2536)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dbus is only needed for some of the glib tests which we don't use. We can
therefore drop the dependency and gain some small parallelism gains.
(From OE-Core rev: 4642ae91cee2978956a61cf15df7ea62e3eb1726)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-dev packages require pkgconfig, but it pulls in glib->dbus->shadow
which breaks with tiny's minimal libc.
-dev packages are not currently supported on poky-tiny.
[YOCTO #2030]
Proposed-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit which introduced the new hob UI also deleted this class
which is used by depexp.
(Bitbake rev: d54dbe54cde8e0086bf1fb4926468e212660db53)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we find an error in the layer configuration (such as an unsatisfied
item in LAYERDEPENDS) then exit by raising an exception at the end of
handleCollections() (without producing a backtrace).
(Bitbake rev: c7486a09310fe63b1aa1b7b0bb9450f306b6093b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Added cifs to mountnfs.sh and umountnfs.sh.
(From OE-Core rev: c44e51f281101c8933679f679e3d4a75a41bedf7)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* += is important, because if oe-core is in BBLAYERS after some other
layers with SIGGEN_EXCLUDERECIPES_ABISAFE it overwrites their entries
(From OE-Core rev: 3aa1bb01c0fa91bcb7d9a03198d19ac88a1bdecb)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is to reduce the size of licenses added to images. With this
commit license.manifest, original license and generic license
adds about .5M to a core-image-minimal image, substantially less
than what is currently occuring when COPY_LIC_MANIFEST and
COPY_LIC_DIRS are set.
(From OE-Core rev: 2c753a714c1ee2b7c6479836f47aeec182ca3670)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should look for LICENSE at a package level first. If it's
not found, we should use the recipe level LICENSE. This adds a
bit more granularity to license manifests where needed.
(From OE-Core rev: d50dd280f52587b6225bc5db3c9e85f78107f5f5)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This slipped off my plate. Adding the email response from the
author of less which allows us to use a generic BSD instead of
the less license.
(From OE-Core rev: fa7bdf96b8eb8b5078db38249c5c60ec511c35c6)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the scripts to launch the new Hob.
(From OE-Core rev: 22194a04f224864dd687660e351a3a10da1f06fa)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit implements a new design for hob
Some of the new features:
- Friendly new designed GUI. Quick response to user actions.
- Two step builds support package generation and image generation.
- Support running GUI seprarately from bitbake server.
- Recipe/package selection and deselection.
- Accurate customization for image contents and size.
- Progress bars showing the parsing and build status.
- Load/save user configurations from/into templates.
(Bitbake rev: 4dacd29f9c957d20f4583330b51e5420f9c3338d)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Fengxia Hua <fengxia.hua@intel.com>
Designed-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The typical workflow for linux-yocto simply uses a remote
upstream repository (Whether it is mirrored or not), and in this
case there are no issues with consistency in the format of the
resository that is unpacked into the WORKDIR.
When working with a local linux-yocto repository for kernel
development the remote vs local branches is not always consistent
between repositories.
The suggested/documented workflow has always been to use a
bare clone of linux-yocto, and use a second working tree repository
for development. Changes flow from the working tree to the bare
clone and then into the working directory for build. A common
mistake that happens with this workflow is that the non-bare,
working repository is used instead of the bare clone version.
If a non-bare repository is reference by the SRC_URI, then the
branches that are fetched into WORKDIR are not consitent. If the
MACHINE and META branches are not present, cryptic build errors
will result.
To solve this problem, the checkout code has been changed in
several ways:
- works with a newly proposed 'bareclone' option to bitbake
- detects if a bareclone is present in WORKDIR or not and
adjustst the checkout accordingly.
- if a non-bare clone is detected, machine and meta branches
are checked. If they are not present, or can't be created
a clear error message is produced
- instead of manipulating the refs directly in the git tree,
local tracking branches are (quietly) created for remote
branches. Enabling a better workflow in the WORKDIR kernel
repository.
This has been tested with linux-yocto remote upstreams, local
bare and non-bare respositories. All builds succeed or fail
with clear error messages.
(From OE-Core rev: e3b6537cc7931636ab11ae6ed2c8fbaad9da91bc)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* also fixes replacing paths for perl where cmd line was probably
too long for os.system(cmd) (it had 560410 characters because a lot of
files from sstate_scan_cmd).
* also print those 2 commands so we can find them in log.do_package
(From OE-Core rev: 94c52d68fc2ce258bcc5b0978ac73413480a1a93)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0.15.1 has been available in OE-Core for some time and has demonstrated
no major regressions, so remove the older version.
(From OE-Core rev: d242e637a2b5101985befd93d3b560f17b37504b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable X11 output support for target and nativesdk if x11 is not in
DISTRO_FEATURES.
Fixes [YOCTO #2020]
(From OE-Core rev: 506e4c9b05d61f126fff112d7c111902d5c9fac5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow building for nativesdk with x11 removed from DISTRO_FEATURES
by conditionally disabling qemugl (which requires X).
Fixes [YOCTO #2020]
(From OE-Core rev: 136b13eb6a682222e2af887d3247a61310476c70)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a SPLASH_IMAGES variable which you can set to include one or more
images (listed in URI form as they would appear in SRC_URI), and an
executable will be built for each one, with each executable packaged
separately and managed at runtime using the alternatives system. An
optional "outsuffix" parameter can be used to specify the suffix for the
executable/package name. The images themselves can either be
pre-processed image header files (produced using the
make-image-header.sh script that comes with psplash), or alternatively
you can provide a .png and it will be converted using the aforementioned
script on the fly (at the expense of requiring gdk-pixbuf-native at
build time).
This has been implemented in such a way that you can still just provide
your own psplash-poky-img.h in a bbappend and it will work as it did
before; the only change being that the psplash executable is provided
in a "psplash-default" package rather than in the main psplash package,
and an RRECOMMENDS is set up to ensure psplash-default gets pulled in
(if you specify your own file or change the outsuffix you will need to
either install it separately yourself or add your own RRECOMMENDS
relationship.)
Implements [YOCTO #1947]
(From OE-Core rev: d3de5f7308b4a42b809884119a670af5bedde38f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the OpenEmbedded logo for psplash in OE-Core.
(From OE-Core rev: cd321b83c78c00003f1ce06ac3ca85647cf9df51)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-core now uses the OpenEmbedded logo for the psplash image; override
this and use the Yocto Project image as we did previously.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For similar reasons as the nocheckout option, packages that need
enhanced control over the checkout and branch creation on a repository
may want a complete mirror/bareclone created of the repository when
performing the unpack.
This is useful/required when a local respository is being used, but
local tracking branches have not been created for all branches that
a given recipe needs to manipulate. The standard git clone operations
will create remote branches for the branches that are local to the
source repository, but branches that are remote do not translate to
the destination repository. Doing a mirror/bare clone of the source,
makes all branches available to the repository.
This is a particular use case, but the ability to do a bare clone
creates great flexibility in recipe space, with no impact to recipes
that don't need this functionality.
To implement this, a new option 'bareclone' is craeted which creates
a mirror copy of the repository and leaves it bare in the unpacking
phase. A recipe that uses this option must both checkout and debare
the repository itself.
(Bitbake rev: 82482aae6f311c994275fb0b6b32d954bbfc78c3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When introducing new items to DISTRO_FEATURES that control functionality
that is already enabled, in order to leave existing distro configuration
unchanged we need a way to "backfill" these new feature items onto the
existing DISTRO_FEATURES value.
This introduces a DISTRO_FEATURES_BACKFILL variable whose items will be
added to the end of DISTRO_FEATURES, unless they also appear in
DISTRO_FEATURES_BACKFILL_CONSIDERED which distros can use in their
configuration to prevent specific items from being added.
Fixes [YOCTO #1946].
(From OE-Core rev: 738658d9d5ddef026d2929188744aa225324bf26)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python-pygtk depends on libgtk and libgtk's recommends have
gdk-pixbuf-loader-{png,jpeg,gif,xpm}, so we have the warnings.
We can add hicolor-icon-theme to fix the warning:
Configuring gdk-pixbuf-loader-png.
gtk-update-icon-cache: No theme index file.
Configuring gdk-pixbuf-loader-jpeg.
gtk-update-icon-cache: No theme index file.
Configuring liberation-fonts.
Configuring gdk-pixbuf-loader-xpm.
gtk-update-icon-cache: No theme index file.
Configuring gdk-pixbuf-loader-gif.
gtk-update-icon-cache: No theme index file.
Add socat for to faciliate proxy setting.
(From OE-Core rev: d32933a74b380aac906bbfbe1ec7d89b02e9f72d)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add missing pango and glib-2.0 dependencies.
Fix QA warnings:
WARNING: For recipe libfm, the following files/directories were installed but not shipped in any package:
WARNING: /usr/lib/gio
WARNING: /usr/lib/gio/modules
WARNING: /usr/share/mime
WARNING: /usr/share/mime/packages
WARNING: /usr/share/mime/packages/libfm.xml
(From OE-Core rev: f6f527694e4f896b5d8a649f0b12f5b437c27cd1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current code prints a log when a setscene task starts, therefore
the progressbar in hob will not receive it. Use a sceneQueueTaskStarted
event instead.
Besides, change the sceneQueueTaskFailed event to inherit runQueueEvent
directly to avoid confusion to event receiver.
(Bitbake rev: 7c07cc93d6558d7d9c3144b13493901b7ebae050)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes runtime requirement checking and read-only-fs checking.
(From OE-Core rev: c50a46fbd50a148146fb1f077db20cdc8121f20b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new layer contains hob-image.bb and hob-toolchain.bb that
are used by hob to build images or toolchain.
(From OE-Core rev: 213b5038215b1d7df10f1df0375610034fa156c7)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
packageinfo.bbclass is to pass the accurate package information to
clients (e.g. Hob), including PN, PV, RDEPENDS, PKGSIZE, etc.
(From OE-Core rev: 1a0be9ec4d53cfcaea907edebe5d8bb525496b4e)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Write the size of a package into its pkgdata for hob2 to get the size
and show on the UI for image making.
(From OE-Core rev: 9c446d007957dab36ee2c012f0a5b22494a7a84f)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to ensure any aclocal-copy directory is removed before we s
earch for .m4 files, else the locations .m4 files are found from can
vary depending on whether its the first or second time we run configure.
Clearing any existing aclocal-copy directory before we start resolves
this issue and makes builds deterministic again.
(From OE-Core rev: 673e2a05013cbe08efde936f663845031025689d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no point in depending on desktop-file-utils if we're not going to
use it. This patch makes the dependency conditional upon the desktop tests
being enabled.
(From OE-Core rev: f775f76dc01f1a969c00f697507958d8a4f9b088)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can create directories like /usr/src/debug as part of the debug file
manipulations. If these are going to end up empty, remove them to avoid QA
warnings like:
WARNING: For recipe task-core-x11, the following files/directories were installed but not shipped in any package:
WARNING: /usr
WARNING: /usr/src
WARNING: /usr/src/debug
WARNING: For recipe task-core-console, the following files/directories were installed but not shipped in any package:
WARNING: /usr
WARNING: /usr/src
WARNING: /usr/src/debug
(From OE-Core rev: 4f4451f7c0f9762092eb3dbc995b4afa2572ceb6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang
Richard Purdie
Eric BENARD
Martin Jansa
Darren Hart
Joshua Lock
Paul Eggleton
Andreas Oberritter
Otavio Salvador
Elizabeth Flanagan
Saul Wold
Dongxiao Xu
Bruce Ashfield
Khem Raj
Dexuan Cui
Shane Wang