The do_install_ptest_base task should have cleandirs flag, just like
the do_install task. The ${D}${PTEST_PATH} directory should be cleaned,
Otherwise, there would be similar errors like below if the
do_install_ptest_base task is rerun.
ln: failed to create symbolic link `xxx': File exists
[YOCTO #5129]
(From OE-Core rev: 25885d3b4f679c33a514d858bc20b0e21aa63721)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_install_ptest_base function uses 'type -t' command to check
whether do_install_ptest is a function and acts correspondingly.
However, the 'type' command is a shell builtin and its behavior is
not all the same across Linux distros. On ubuntu, if we use #!/bin/sh
as the interpreter for the scripts, as in the case of our intermediate
scripts, the '-t' option for the 'type' command is not supported. So
the check always fails and the do_install_ptest function, even if defined,
is not run.
The same problem also applies to the do_configure_ptest_base and the
do_compile_ptest_base functions.
This patch fixes this problem by avoiding using the 'type' builtin command.
[YOCTO #5128]
(From OE-Core rev: d5a4f031b460437e9501e4e65194ce94d3641130)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
APM is not only obsolete, but also requires a kernel config enabled, which is not enabled by default
[YOCTO #5121]
(From meta-yocto rev: e25c43661f27b27e61aa7fae868237c1c60e3e25)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
APM is not only obsolete, but also requires a kernel config enabled, which is not enabled by default
[YOCTO #5121]
(From meta-yocto rev: 91e6d33135cc48aaf20a6138c050c6989af1f13a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be an race issue if we:
$ bitbake make-3.81 make-3.82
This because they are being built at the same time which would cause
unexpected problems, for example:
[snip]
ERROR: Package already staged (/path/to/tmp/sstate-control/manifest-qemux86-make.populate-sysroot)?!
ERROR: Function failed: sstate_task_postfunc
[snip]
Or there would be python's strack trace such as:
[snip]
*** 0004: mfile = open(manifest)
0005: entries = mfile.readlines()
0006: mfile.close()
0007:
0008: for entry in entries:
Exception: IOError: [Errno 2] No such file or directory: xxx
[snip]
[YOCTO #5094]
We can quit earlier to avoid this kind of issue when two versions of the same PN
are going to be built since this isn't supported.
(Bitbake rev: ab377c00c33a2d296bfda1b0b6c2a62b29d1004f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The runtime provider debug message is the same as the build time debug
message, make them different would be better.
[YOCTO #5067]
(Bitbake rev: 92b624cbc2711d3d859994099fb63918dfd0031a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
APM is not only obsolete, but requires a kernel config enabled and is meaningless for QEMU VM
[YOCTO #5121]
(From OE-Core rev: b0f8c47b1e808421f03308527beb8bde15644acd)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In exclusive mode, we need to complete the transaction for writes to make
it to the database. Therefore add sync calls to ensure this happens.
Autocommit mode is significantly (100 times) slower so caching the
data is of significant benefit.
(Bitbake rev: 4e55f7821786a59c2cd7dbd8bfa2a22f5f196e99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For unknown reasons, the cmake class is using SDK_OS as the
target system OS. This makes no sense but only shows up as a problem
when you try a different SDK OS. Fix it to use TARGET_OS which is
the correct thing to do. For the vast majority of users this will
make no difference.
(From OE-Core rev: 57be84259f0885865c85d7bac350979430b956b5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages like grub have already stripped binaries e.g.
ERROR: QA Issue: File '/boot/grub/kernel.img' from grub was already
stripped, this will prevent future debugging!
ERROR: QA run found fatal errors. Please consider fixing them.
We would like to have a possibility to skip it using something like
INSANE_SKIP_${PN} = "already-stripped"
This adds the logic to do so
it acts at PN level and not at package level. so something like
INSANE_SKIP_${PN}-misc = "already-stripped" wont work.
(From OE-Core rev: 765982f4c050d9cd3eb608d630312da482c737c7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the machine SRCREVs for the hardware reference boards to the
latest 3.10.10 and ssh fixes.
(From meta-yocto rev: 2aa6cc9d64fc22a8d0f02c5cf97440b634ba5e36)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In 3.10.x linux kernel, uImage can't be compiled by default. But zImage
has been supported by the latest u-boot, so use zImage as the default kernel
image file. In u-boot command, use "bootz", instead of "bootm", to boot the kernel.
And add device tree files to support dtb in latest kernel.
(From meta-yocto rev: ff6b4ae23ccd14cefdb94c561160fbdc8344793d)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the mpc8315e-rdb to the latest available yocto kernel.
Build and boot test on mpc8315e-rdb board with core-image-sato.
(From meta-yocto rev: 67088a41b1f2222ffceba40928ebce87b9bff180)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The genericx86 and genericx86-64 machines share a great deal in common
in terms of machine features, required packages, etc. Use a common
include file to simplify changes to both machine definitions and avoid
accidental omissions.
Replace the hard-coded XSERVER assignment with the XSERVER_IA32*
defines from ia32-base.inc.
(From meta-yocto rev: c70ee30da060173f51e8dba72069052ecff389b5)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Ross Burton <ross.burton@intel.com>
Cc: yunguo.wei@windriver.com
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some machines provide several possible configurations and until now
there was no easy way for user to override the default setting.
This class provides a system similar to PACKAGECONFIG but for
U-Boot. The format is:
UBOOT_CONFIG ??= <default>
UBOOT_CONFIG[foo] = "config,images"
There are two possible parameters:
- config: it is used to set UBOOT_MACHINE
- images: it is used to append onto IMAGE_FSTYPES
Below there's an usage example:
,----[ i.MX6Q SABRE AUTO based example ]
| UBOOT_CONFIG ??= "sd"
| UBOOT_CONFIG[sd] = "mx6qsabreauto_config,sdcard"
| UBOOT_CONFIG[eimnor] = "mx6qsabreauto_eimnor_config"
| UBOOT_CONFIG[nand] = "mx6qsabreauto_nand_config,ubifs"
| UBOOT_CONFIG[spinor] = "mx6qsabreauto_spinor_config"
`----
User can, from local.conf or environment, use UBOOT_CONFIG=nand and
override the default setting, as:
,----[ Override example from command line ]
| MACHINE=imx6qsabreauto UBOOT_CONFIG=nand bitbake core-image-base
`----
(From OE-Core rev: 5dba521611d644357cf0a98d2e30dcf41777c6ef)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5110]
Add support for the iwlwifi 7260 adapters. This creates a new package
and includes support in the default linux-firmware (everything) package.
Update the iwlwifi and radeon license checksums. Extensions to the
copyright date ranges were the only change to the LICENSE files.
(From OE-Core rev: bf4044ab8f9ef3be087996a559c54eeded1fb0c8)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: yunguo.wei@windriver.com
Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kern-toosl SRCREV to pick up the following fix:
previous versions of the kern-tools supported the ability to import a bare
patch, with no From: Subject: or other identifying fields that are typically
in a full commit.
The same type of commit with kgit-s2q will prompt for a author ID, just
as git-quilt-import does. In build system environment that leads to an
infinite loop and the commit is never pushed.
To fix this issue, we add an interactive flag (-i), that when passed the
prompt based behaviour is used. When it isn't passed (the default), the following
name and email will be used for the git author:
GIT_AUTHOR_NAME="invalid_git config"
GIT_AUTHOR_EMAIL="<unknown@unknown>"
And a bare/incomplete header patch will be applied.
[YOCTO #5100]
(From OE-Core rev: cb0d8f8b9c59b351d11eef9c4951c4ce5601acb8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While non-git kernel repos are not the preferred format for a kernel upstream,
they are supported. Depending on the creator of the archive the expanded
source directory name varies. If the recipe for the kernel doesn't properly
set S to the right value, a cryptic git error message is produced. We can
detect the situation and offer some advice on how to fix the issue.
A second check is also added in this commit for archive based kernel repos
which won't have a SRCREV to validate. If we have no SRCREV or SRCREV is
INVALID, we can exit the branch validation step immediately. This saves yet
another cryptic git error message and simplifies a custom tgz based recipe.
(From OE-Core rev: 0ebf67e8b4f7aaf259d7abac4af645070d846ec8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the beagleboard configuration to match the 3.10 kernel changes.
With this, the beagle* boards boot out of the box, with no additional
changes required.
Simarpreet Singh <simar@linux.com>
(From OE-Core rev: 410a4db2faec084a0e918dfce9fcb6c54d2aeaaf)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bluez5 ships some tools that can be used to test its
functionality.
The installation can be tested using "make check" and
this should be included in a ptest package.
[YB #5028]
(From OE-Core rev: 8c3cbaf3fa5eafa55f209100211bd5c124b8cfaa)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bluez5 doesn't install libbluetooth by default. This is required
by connman, ofono or other packages.
(From OE-Core rev: bf7415366646db7661795620fa1ab2e78b12d947)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If binfmt_misc was compiled as a module but isn't installed then systemd-binfmt
will put an automounter on /proc/sys/fs/binfmt_misc and when it attempts to
automount (e.g. when df is called) it can't find support for the filesystem, and
throws an error.
As binfmt_misc isn't commonly used, split this helper into it's own package, add
a dependency on kernel-module-binfmt-misc, and ensure the service gets started
when it's installed.
[ YOCTO #4863 ]
(From OE-Core rev: d42f7fc333495dc35227a6d1027492ab70f29b23)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A 0 value to select.select() immediately returns with no timeout. This was
pegging the cpu at 100% for the python process which was bad and may be
contributing to some of the timeout problems.
Profile from -P of a core-image-minimal before:
97526792 function calls (97525652 primitive calls) in 45.189 seconds
and after:
50204 function calls (49064 primitive calls) in 17.318 seconds
Saving 97.5 million function calls has to be good :)
(From OE-Core rev: c0551436974d179df23418567f18a082830380f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running systemd-tmpfiles --update without specifying a configuration
file results in all tmpfiles.d configuration files being processed.
/usr/lib/tmpfiles.d/systemd.conf creates /run/nologin on boot to
prevent non-root users from logging in while the system is booting.
If systemd-tmpfiles --update is run after the system has started,
it will still create /run/nologin which would prevent non-root users
from logging in with the message "System is booting up.".
(From OE-Core rev: 24f9280c35001ff6c1d5a263fab41ae21a8056f3)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This uses scanelf from the pax-utils package and scans the binaries in PATH
for TEXTREL and RPATH information. For a sato image with pax-utils installed
it shows no output (which is good).
(From OE-Core rev: 629099ad66f5fa2814e5f7908b426149e8978e43)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also split out Marvell license as separate package.
(From OE-Core rev: 64fbea5625488adc0dcccf2cf3c09880b9554a52)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Follow upstream in changing the name of the license file for Marvell
firmware:
commit 2e79e60b7e4771427327ed508fa27b90d841afcb
Author: Bing Zhao <bzhao@marvell.com>
Date: Fri Jan 7 16:06:56 2011 -0800
linux-firmware: use single license file for Marvell firmwares
Libertas and mwl8k firmware images are under the same license.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Brian Cavagnolo <brian@cozybit.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
:000000 100644 0000000... 3224e1b... A LICENCE.Marvell
:100644 000000 1fd8766... 0000000... D LICENCE.libertas
:100644 000000 3224e1b... 0000000... D LICENCE.mwl8k
:100644 100644 d0740ce... 35b82c8... M WHENCE
(From OE-Core rev: 0947e1fd559ce3dbce3705d1f3267860f04e3348)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The devshell anonymous python fragment overwrites variables in the
datastore with their expanded versions. If this runs before the code
in allarch.bbclass which changes TARGET_OS, we can end up with different
directories in the fakeroot environment variables, some expanded with
the original TARGET_OS value.
The devshell code only needs to run before the task itself so we change
to trigger it to run at task execution time only using a flag.
[YOCTO #4795]
(From OE-Core rev: 56baf177cdf074929a090cc66a8b89d346a5d79c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparently, when opkg/dpkg and run-postinsts are installed in the same
time, opkg/dpkg postinstall overwrites the run-postinsts link in rcS.d.
This will make run-postinsts script useless and the delayed postinstalls
will not be run.
This issue happens only when 'package-management' is disabled and, in
the same time, dpkg/opkg ends up in the image: either pulled by some
dependency or manually installed.
With this patch, both opkg/dpkg and run-postinsts scripts will run but
the former will silently fail because the package metadata is removed from
the image since 'pacakge-management' is disabled.
[YOCTO #4484]
(From OE-Core rev: 882da38f226acc40c041155218549edad461b7d7)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The connman init.d script tried to ignore all the network interfaces
if NFS root is configured. We should only ignore the interface
that is used by NFS root.
[YOCTO #4587]
(From OE-Core rev: 1838671b832015ae28c8c101e8b20afbbf4b3c98)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the code was refactored to address review comments, the wrong version
was sent to the community. Replace the $1 with ${target_rootfs}
Fix identified by: Yue Tao <yue.tao@windriver.com>
(From OE-Core rev: a04f4fe8db425f0ea87a67b5c72d61816b8d53e2)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there is a package A (TUNE_PKGARCH) which is depended upon by B which
is MACHINE_ARCH and you build B for machine X, then Y, the user isn't
present in the sysroot for machine Y since the useradd code is never
triggered.
The change ensures the code does get triggered and the user is present.
[YOCTO 4739]
(From OE-Core rev: 5871337da49f8cd1eaf53f7cd0aacc026dc7bcdb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch aims to fix the following two cases for the INITRAMFS generation.
1) Allow an image recipe to specify a paired INITRAMFS recipe such
as core-image-minimal-initramfs. This allows building a base
image which always generates the needed initramfs image in one step
2) Allow building a single binary which contains a kernel and
the initramfs.
A key requirement of the initramfs is to be able to add kernel
modules. The current implementation of the INITRAMFS_IMAGE variable
has a circular dependency when using kernel modules in the initramfs
image.bb file that is caused by kernel.bbclass trying to build the
initramfs before the kernel's do_install rule.
The solution for this problem is to have the kernel's
do_bundle_initramfs_image task depend on the do_rootfs from the
INITRAMFS_IMAGE and not some intermediate point. The image.bbclass
will also sets up dependencies to make the initramfs creation task run
last.
The code to bundle the kernel and initramfs together has been added.
At a high level, all it is doing is invoking a second compilation of
the kernel but changing the value of CONFIG_INITRAMFS_SOURCE to point
to the generated initramfs from the image recipe.
[YOCTO #4072]
(From OE-Core rev: 609d5a9ab9e58bb1c2bcc2145399fbc8b701b85a)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add packaging for libgfortran and libquadmath as well as tweak the packaging
for libmudflap since it was broken.
(From OE-Core rev: 8a726d14a345ef35c6d8d8e369bf3691cee879bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add an example of how to enable FORTRAN from local.conf. Make
it clear this is not officially supported.
[YOCTO #5091]
(From OE-Core rev: 8e971a457427ad3999ff3cf4c9be3c141d6bb7be)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a file object to generate a our test file instead of calling `dd`;
removes dd's output from testimage.log, keeps unittest output clean.
Also remove unused imports.
(From OE-Core rev: 6ac48ffbab29a37b0eada533191878aeae3c91f0)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add ssh_options to be used, the same, by ssh and scp:
Decrease LogLevel to ERROR, to suppress warnings (e.g. ssh host
verifications, two warnings in case of having openssh with hpn patches);
We no longer presume that the first line is a warning.
(From OE-Core rev: 1f18d04eec03e586134b6d77ca1c6151c22353dd)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set longMessage to True for all tests derived from oeRuntimeTest, in
order to have somewhat info on assertions with cryptic or no messages.
(From OE-Core rev: e5196ebd6c652431a3b80cdc9f60b752401314f4)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These links were moved to the lsb package because lsbsetup was to be
removed. Subsequently an earlier patch that moved them to chkconfig was
also merged. This results in duplicate installations that generate a
warning when building core-image-lsb under DISTRO=poky-lsb which enables the
linuxstdbase feature.
(From OE-Core rev: 77a0b904e18688ecf81a35544f3a5d6ba0aa61a8)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since its initial commit from the classic OpenEmbedded repository
in 43e94412c4, serialization was
commented out, reportedly due to some issue with powerpc in the
boost version 1.36. In the classic OpenEmbedded repository,
serialization has been added again since version 1.4x.
The commit removes the outdated comment and adds serialization to
the BOOST_LIBS after testing `bitbake boost` and bitbaking some
applications using boost from the meta-ros layer for qemuppc.
(From OE-Core rev: a193d868a0c01a2998adb3e6eec9fc2748cca888)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglinfo is a small utility for printing out information about EGL as well
as about its client APIs, OpenGL / OpenGLES 1.x / OpenGLES 2.x / OpenVG.
Recipe originally by Carlos Rafael Giani <dv@pseudoterminal.org>.
(From OE-Core rev: a8835cc014d761bf18a420b48c7c61cdfeded552)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new build system class for waf.
(From OE-Core rev: 2b148b9e73f05af33ed1437358fa5322cf364651)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sysklogd package hasn't got systemd support yet. So in case of
a systemd based system, the commands and corresponding configuration
files should have a lower priority than that of the busybox's syslogd
and klogd utilities. These two utilities from busybox have internal
systemd support if CONFIG_FEATURE_SYSTEMD is enabled. And that config
item is enabled by default.
[YOCTO #5066]
(From OE-Core rev: 45d18a1b6bcdc56d252b289d0d304b26799943b0)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, busybox has CONFIG_FEATURE_SYSLOGD_CFG enabled, but it
doesn't ship a configuration file.
This patch adds a configuration file (/etc/syslog.conf) to the
busybox-syslog package. This configuration file mainly serves as a
placeholder now.
The advantages of this change are:
1. Make the users aware of the fact that the /etc/syslog.conf file
will actually be parsed by busybox's syslogd utility. And configuring
that file will change the logging behaviour.
2. In a systemd based system, this file will prevent the same configuration
file provided by the sysklogd package from messing things up.
[YOCTO #5066]
(From OE-Core rev: b7f6688f0700a1575037362af7a8ca94dccce471)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid: print message if rule directory is inexist
If rule directory is inexist, the acpid initscript will exit with success,
but the daemon will be not running.
Print message in this case to tell user that the daemon is not running.
(From OE-Core rev: 66a5d15cecdf4bd267dbae5f771ebf3768232481)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Woegerer
Chen Qi
Saul Wold
Robert Yang
Richard Purdie
Khem Raj
Bruce Ashfield
Liming Wang
Kevin Hao
Darren Hart
Otavio Salvador
Mihai Prica
Ross Burton
Jonathan Liu
Stefan Stanacar
Peter A. Bigot
Laurentiu Palcu
Jukka Rissanen
Mark Hatle
Thomas Fitzsimmons
Jason Wessel
Mihai Lindner
Lukas Bulwahn
Bian Naimeng