These were recently added by me and I'm prepared to continue maintaining
them.
(From meta-yocto rev: c31d43ba3799bd54e143505db38910574e6233ec)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is GNOME, 2.[odd] are development releases.
(From meta-yocto rev: 4aeaf195e10ecf053acae768ff800c0245f4e15f)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some labels needed to be changed in order to respect the convention.
[YOCTO #4999]
(Bitbake rev: 110b485eac6adea242297b7942da8710403c465a)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Assuming there is no known reason why an item is not provided, show
close matches on the assumption that it might have been a typo or
other mistake.
(Bitbake rev: ed81b0856b4a3892b53d39871eaaa6273390ea75)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Help to pick up mistakes such as "bitbake -c cleanstate xyz" (instead
of "bitbake -c cleansstate xyz".)
(Bitbake rev: 15c3db1cffdffd85641c6b12e77f19ce7a553472)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new version of texinfo uses perl for the conversion process.
The perl modules are installed in ${datadir}/texinfo which was getting
pulled into the -doc package, since FILE_${PN} is a full override, add
it back.
(From OE-Core rev: f0b6734182a5505fad7d26bc67a2141e51bc7a9d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the rootfs is read-only and the ssh keys are not available at system
start-up, the init script will generate ssh keys into /etc/ssh, thus
causing a 'read-only file system' error.
In order for Yocto based image to work correctly for read-only rootfs,
we use the following logic for openssh.
If the rootfs is read-only and there are pre-generated keys under /etc/ssh,
we use the pre-generated keys. Note the pre-generated keys are mainly for
debugging or development purpose.
If the rootfs is read-only and there are no pre-generated keys under
/etc/ssh, we use /var/run/ssh as the location for ssh keys. That is, at
system boot-up, the generated ssh keys will put into /var/run/ssh.
[YOCTO #4887]
(From OE-Core rev: 2ed44745024f04aa4e00ddba3009153c6b47c8e9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init script for irda writes configuration items to /etc/sysconfig/irda
if that file is not available in system. But it's actually not necessary,
the behavior doesn't change whether the init script writes to the file or not.
Considering it issues error messages in case of a read-only rootfs, I delete
the writing process.
[YOCTO #4103]
[YOCTO #4886]
(From OE-Core rev: f88a101bc0caa7b486527f0d337406651cbaeb0d)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, dead links in target directory will not be copied.
This is incorrect as dead links are not uncommon in our rootfs.
So we use '-a' option instead.
(From OE-Core rev: 742440441222e0627abbdd3eb2ee16401e8f4adf)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The QEMUOPTIONS for ISOFS was not complete, leading to failures when
trying to start X in live images.
This patch fixes this problem.
[YOCTO #4103]
[YOCTO #4884]
(From OE-Core rev: 08947869917dc5a9dfff05b0ee19279f60cf6d2b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're building a read-only rootfs, we'll get the following error now
and then.
tar: .: file changed as we read it
The root cause is that we spawn background process at rootfs time.
When the tar command is running, it's possible that files under rootfs
are changed by background processes, thus this error.
[YOCTO #4937]
(From OE-Core rev: 4bd419f95868d5b8707a45cee5f6c5c6a840a65b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible that a 'No such directory' error occurs when doing
check_requirement in populate-volatile.sh at rootfs time. This is
because the $ROOT_DIR/var/tmp might be a dead link.
Use $ROOT_DIR/var/volatile/tmp as the TMPDIR instead to avoid this
error.
[YOCTO #4883]
[YOCTO #4103]
(From OE-Core rev: 7c2c36a97bab46c73a3a1fb743ad3ec67a4c072e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At some point, the udev was modified to source the functions from
initscripts or lsbinitscripts. This dependency is actually not needed.
If we use udev in a system where initscripts from oe-core is not available,
there will be errors.
This patch fixes this problem by removing the implicit dependency.
[YOCTO #4882]
[YOCTO #4103]
(From OE-Core rev: 72d6825c24f4c3e4a7a907cf0a09e2e8f7720ae8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the live image is mounted as read-only, we cannot make necessary
directories under $ROOT_MOUNT/media, so trying to move the mount points
lead to errors.
So in case that no unification filesystem mechanism is available in kernel
and the rootfs is mounted as read-only, we mount tmpfs on $ROOT_MOUNT/media
so that it's possible to make necessary directories under it.
[YOCTO #4881]
[YOCTO #4103]
(From OE-Core rev: aeeb3418ff08dfd29edc0ce8a41cb6887d4e11fe)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of hard coding the uid/gid, we prefer the way of using user/group
names.
Note the way of using uid/gid is still supported.
[YOCTO #1159]
(From OE-Core rev: c5ef0294a9b8d178896a47c9f5d6e3dd6797e343)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the makedevs supports using user/group names in the devcie
table files, and it uses passwd and group files under the rootfs which
is provided by the base-passwd package, we should let package installation
finish first, so that makedevs can get a correct mapping from user/group
names to uid/gid.
The check for existence of ${IMAGE_ROOTFS}/dev is removed. This is because
do_rootfs doesn't have 'nostamp' flag any more, so the do_rootfs task will
not be rerun for every build. Checking for the existence of ${IMAGE_ROOTFS}/dev
is not necessary any more. Besides, as base-files package also installs the
/dev directory, this checking does not serve as a good criteria.
[YOCTO #1159]
(From OE-Core rev: d073ca77ba886c7912abd3ec0640881c00aea3bb)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Compared to hard coding the numeric group and user ids in the device
table files, the way of using user/group names is preferred.
This patch adds the ability to makedevs to correctly deal with device
table files with user/group names in them.
To maintain backward compatibility, the way of using uid/gid is still
supported.
[YOCTO #1159]
(From OE-Core rev: 1fcf718e3a1e50446ab61972069566e5016bc625)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous code used the environment variable BUILDDIR and assumed that TMPDIR
was a subdirectory. This often isn't the case, so instead ask bitbake where the
directories we're about to delete are.
(From OE-Core rev: 29491a72acac81ebb7e9ecfbc9392fbeb9a7ea26)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xlib has a historical quirk where 32-bit values are returned in longs (but
always hidden through a cast). On 32-bit machines this doesn't matter but on
64-bit this leads to problems. Bump SRCREV to integrate a fix from upstream.
Also, drop the conditional configure_fix.patch, it was integrated long ago.
[ YOCTO #4917 ]
(From OE-Core rev: 09c609afbfb6e9a2504166d0fe8c7ae3d8ae9ebd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove check.m4 as libmatchbox uses the check.pc instead of a m4 file now.
(From OE-Core rev: 4f51bf23346947cd47e7ac9e1290e799f3c20708)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* configure fails without it
at-spi2-core/2.8.0-r0/temp/run.do_configure.372: intltoolize: not found
(From OE-Core rev: 483abbe91c1320d6c6e3e7a5824de80e427aa50e)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per OE-Core convention, indentation should be TAB for shell.
(From OE-Core rev: 91b6d2cf08c5c6ad58f0f9a85a3536a9034342b8)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per OE-Core convention, indentation should be TAB for shell.
(From OE-Core rev: a92376f2daf10baf45d99a3de9502b52cbce8b7e)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per OE-Core convention, indentation should be TAB for shell.
(From OE-Core rev: d73a0d00554cc197d2eb7e95432252af267d7bca)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the current implementation of postinst logging mechanism, the
location for log file is configured via the POSTINST_LOGFILE variable.
The POSTLOG variable is obsolete now, thus removing it.
(From OE-Core rev: 6aaf2d5c51eb4ee6acbb85fd4aa5f44406907bc2)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Separate GL and GLX flags don't make sense, as on Linux GL means GLX and GLX
means GL.
So, default to GLESv2 and GLX if X11 is enabled. EGL on X11 doesn't have
feature parity yet so leave it disabled by default.
(From OE-Core rev: e5f8f6c6191505d731c4672353e811d6729d424a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the Linux kernel, unconditionally, builds the dtc application and
it is the compatible version with the DeviceTree files shipped within
the kernel it is better to use it and the kernel build system to
generate the dtb files.
Some DeviceTree files rely on CPP and kernel headers to be able to
generate the dtb binary contents and it is harder to replicate it
outside of Linux kernel build system so we /use/ it.
To comply with these assumptions we need to use the dtb file when
calling 'make' instead of pointing to the DeviceTree source file; the
code has been made backward compatible but it is advised to move to
the new definition to avoid warnings as:
,----[ Original definition ]
| KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/imx6q-sabresd.dts"
`----
Becomes:
,----[ New definition ]
| KERNEL_DEVICETREE = "imx6q-sabresd.dtb"
`----
(From OE-Core rev: 72980d5bb465f0640ed451d1ebb9c5d2a210ad0c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow for an example recipe with a .bbappend, such as
busybox or kernel configure fragments.
(From OE-Core rev: 2a2a2540b37880cdd866f01d8e4077cbd0378749)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This shows an example of the config fragment support that
both the linux-yocto and busybox recipes use. This example
is specific to busybox.
By adding busybox CONFIG options into a .cfg file and then
adding that .cfg file to SRC_URI the merge_config.sh script will
correctly handle these CONFIG options during the do_configure task.
The merge_config.sh script uses a last-in wins method.
For more details about this, see the Kernel Development Manual Section 2.2.3
http://www.yoctoproject.org/docs/current/kernel-dev/kernel-dev.html#changing-the-configuration
(From OE-Core rev: 57662d4f813d5795cac1529633db80a09efdb089)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should not skip it always since same recipes provide
qemu-native too so user class-target override to make it
only skip for target recipes
(From OE-Core rev: 23d633cc65cf31486263f120c71df82186cfdd22)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build dpkg-native on Fedora 19, it fails with:
/usr/include/c++/4.8.1/cstdlib: In function ‘long long int std::abs(long long int)’:
/usr/include/c++/4.8.1/cstdlib:174:20: error: declaration of C function ‘long long int std::abs(long long int)’ conflicts with
abs(long long __x) { return __builtin_llabs (__x); }
^
/usr/include/c++/4.8.1/cstdlib:166:3: error: previous declaration ‘long int std::abs(long int)’ here
abs(long __i) { return __builtin_labs(__i); }
^
That because header cstdlib is included in a 'extern "C"' block that gcc
4.8 doesn't support. Fix it by move the header file out of the 'extern "C"'
block.
(From OE-Core rev: 7de61ecc3efc43c625dde9a66f5c05e980a82e34)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-setup-builddir substitutes ##COREBASE## which seems like it should have the
same value as the variable ${COREBASE}. In reality it doesn't as ##COREBASE##
is substituted with the value of $OEROOT (the location of the oe-init-build-env
script), whereas ${COREBASE} is set by oe-core to the parent directory of meta/.
If oe-core's meta/ isn't a top-level directory then ##COREBASE## and ${COREBASE}
have different values, which can lead to confusion.
To resolve this, deprecate (but still substitute) ##COREBASE## and substitute
##OEROOT# for $OEROOT.
(From OE-Core rev: 1890783928dd1c73105fae32fb6c588afc287ff6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
base.bbclass had code which handled the PNBLACKLIST in case of
multilib use. This is better to be done in the blacklist.bbclass so it
has all logic in a single place.
(From OE-Core rev: 04f0fefeccc1e7e3af8a1f741350492ae3f171fc)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
opkg is GPLv2+ licensed but it has optional support for sha256 checksums which
was GPLv3+ licensed. This code is not built unless '--enable-sha256' is passed
to the configure script, the default is equivalent to '--disable-sha256'.
However, the header 'sha256.h', which is GPLv3+ licensed, is in the list of
header files to be installed and thus could end up in the libopkg-dev package.
As this header is installed to '/usr/include/libopkg' it is very unlikely that
it will ever be used. However, if you're uncomfortable with GPLv3 code going
anywhere near your target filesystem you won't want this to happen.
The simplest solution is to replace the sha256 implementation in opkg with the
implementation from coreutils-6.9 which is licensed under GPLv2+. This is
committed to the opkg subversion repository as r652/r653.
The only intervening commit between r650 (previous SRCREV) and this is r651,
which integrates 'obsolete_automake_macros.patch' into the opkg sources. Thus
this patch isn't needed in oe-core anymore.
(Note: Before 873689bbabba25e7be5c12317c04519a7bc8d0ef, this header is only
installed if opkg is built in its source tree (ie. ${B}=${S}). After that commit
the header will always be installed)
(From OE-Core rev: 3c6a8a39d820f14f9eb3df3d719cef2c469769da)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4991]
The kernel image is installed as part of the kernel-image package, but
the symlink creation/removal via alternatives is being done in
pkg_post(inst|rm)_kernel-base.
Move the postinst alternatives logic into the kernel-image functions.
(From OE-Core rev: 35f538b117e3387354d2dab1f22c3de28ab1322b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparrently a LICENSE change was missed, so we add the GPLv2 version back in
(From OE-Core rev: 002818712fab5c6325b1f7205512945ea87ad76c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #4993]
Move the runtime_mapping_rename into a prefunc for the do_rootfs function.
Otherwise doing it in the python section could occur BEFORE the multilib
classes renaming.
If the package 'b' is a kernel module, then lib32-b and b should both
point to the same package. The runtime_mapping code will do this
automatically.
Before if you ran: bitbake lib32-<image>
It may do:
start PACKAGE_INSTALL (a b c)
remap (a b c)
MULTILIB naming (lib32-a lib32-b lib32-c)
What we want is:
start PACKAGE_INSTALL (a b c)
MULTILIB naming (lib32-a lib32-b lib32-c)
remap (lib32-a b lib32-c)
(From OE-Core rev: 836662c9a9c175521dbcd29cdfc0a7c144d8770f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some LSB packages appear to have the platform set to '%{_target_platform}'
which is not a valid platform field. This causes a failure of the type:
warning: package lsb-test-core-4.1.15-1.x86_64 is intended for a %{_target_platform} platform
When we detect an invalid platform, fall back and try to construct a new
platform name that may be valid based on the arch and os contents of the
package. (This should only ever be needed by invalid or older RPM packages.)
(From OE-Core rev: 6513fa327aeb7e9fdd313290c205917952eed226)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the #define references to match RPM_VENDOR_OE.
(From OE-Core rev: a84ecc5ad158a7529a904785de25ebfedf5767a7)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Devicetree files were installed hard-coded in /boot. When KERNEL_IMAGEDEST
is anything else but "boot", the postinstall script and the file locations
no longer match and the postinstall will fail.
Replace "boot" with "${KERNEL_IMAGEDEST}" to fix this problem, and to allow
the devicetree files to be installed in another location.
(From OE-Core rev: 0f589b9a38397fdf55025062a45889b19d1c83c4)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The grub_fix_for_automake-1.12.patch replaced pkglib with pkgdata to
make grub_0.97 build with automake-1.12. However, it forgot to set up
the pkgdatadir, thus causing grub_0.97 not shipping files under /usr/lib.
This in turn resulted in an unworkable grub.
This patch fixes this problem by setting up the pkgdatadir correctly.
[YOCTO #4997]
(From OE-Core rev: 883b1b396328e6cd67dcb4ca6fd8975b6e716c0a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New systemd runtime tests for enable/disable service, start/stop service and list services.
(From OE-Core rev: 6386dc718f85210c9b6b9f69878ec9a7847b78de)
Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Cristiana Voicu
Saul Wold
Chen Qi
Ross Burton
Martin Jansa
Stefan Herbrechtsmeier
Muhammad Shakeel
Otavio Salvador
Khem Raj
Kai Kang
Jukka Rissanen
Paul Barker
Darren Hart
Mark Hatle
Mike Looijmans
Alexandru Palalau