Now the latest version of u-boot is 2013.07 and it depends on
its own MLO, instead of x-load, as the Second Program Loader. So remove
x-load and use u-boot's MLO.
And also replace u-boot.bin with u-boot.img as the u-boot image file.
(From meta-yocto rev: 468326eca78f1fc16f83d2a1fc06a66fae2e6ba1)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't start the http server on 0.0.0.0, listen on host ip (end of tap interface) only.
Also use the timeout option (default is 300s for ssh commands) for all the commands
run in this module (mostly because smart update timeouts on mips).
(From OE-Core rev: 8c272641ef3e8410f331ca4133d28dea8f36e4f4)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This restores this check after it was disabled by recent poky rev
560dac6e7d. This check is already in
ERROR_QA in the default value set in OE-Core.
Fixes [YOCTO #5088].
(From meta-yocto rev: 9b0aef0651a76b0587d52bd3022cc64786ff1f7b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PulseAudio's GTK+ support is limited to a test case and automatic icon name
population for applications. This is too limited to enforce GTK+ 3 on all
builds, so disable it by default.
(From OE-Core rev: 619e63946fef32995363981aab288fc669e8ac04)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do-autoreconf patches only change generated files. We run autoreconf ourselves
so we don't need these patches. Worse, they cause failures since the do_patch
task can't rerun after configure since the files change and the patch is no longer
clean.
Drop the patches since we don't need them.
(From OE-Core rev: 37e9a01d38892e8a6fd225854e5b8cc332a5f2ea)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set memory size to 256M for qemuarm, qemux86, qemux86-64, qemumips,
qemumips64, and qemuppc.
This allows the smart automated tests to run on machines with a GUI
environment (such as Sato) running at the same time, for which 128M is
too limiting. Setting this in runqemu allows users manually using
runqemu to avoid the same out-of-memory issues under similar conditions
using smart, on-target compilation or other uses.
Fixes [YOCTO #5045].
(From OE-Core rev: fe5dfdece98692f8fa731c8d11c907a272266ea5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous changes were totally broken as quoting globs doesn't work. Remove
the quotes so the rm commands actually delete the stamps.
(From OE-Core rev: 5eca43debd7fbc861d41f4e260b37282915bd053)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cookerdata.findconfigFile method has a new parameter. Changed some calls.
(Bitbake rev: dce0f9d4afe0986e2dd0146944fc4ac9dde275e4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was missed off in a previous patch.
(Bitbake rev: ad7664edd40fa46e6f6fec2144403e3b6fc3a639)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the recently fixed out of build directory bitbake invocations, I was
puzzled why bitbake seemed to be pausing. The reason was due to running the sanity
tests each and every time. This was due to current working directory assumptions
within the sanity test code. Fix this to use TOPDIR.
(From OE-Core rev: 1cdc1b37b840bda961258cf2bfb2f75331bdb310)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These have been deprecated for a long time, convert the remaining
references to the correct modules and prepare for removal of the
compatibility support from bitbake.
(From OE-Core rev: 6a39835af2b2b3c7797fe05479341d71a3f3aaf6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the server only expects a single client to connect (i.e.
no bind parameter set, so there is no way for the
clients to get the server port), stop the server after
the first client exits.
(Bitbake rev: eb6bae56f62082bf147045311154cbae4bca0f4c)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the threading mixin class resulted in large amounts of memory
being used by the PR server for no good reason. Using a receiver thread
and a thread to do the actual database operations on a single connection
gives the same performance with a much saner memory overhead so
switch to this.
(Bitbake rev: e08455d5f3b8e96765942b9c3b9767c30650557d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the basename of the .bb file is not unique, for example xxx-native
and xxx can overwrite each other. If this happens whilst running, you can
get odd backtraces as one file is parsed as another tries to write out
new data.
Avoid issues by using PN for the output filename instead.
(Bitbake rev: c9534f8e59d44b885334607ed90a3be2e492ec69)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we don't support using multiple servers on the same database file,
don't use the BEGIN/COMMIT syntax and allow writes to the database
to work ~100 times faster with no transaction locking.
(Bitbake rev: 42144a54979658f93fbbb43f7e271c1fff4d88ff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only support one server using the database at a time so take an exclusive
lock and avoid later lock overhead.
(Bitbake rev: e3e39be6f2d063858c92971ce8ccd89c95d4f26d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the database is locked we will get an immediate error indicating so,
there is no retry timeout. The looping code is therefore useless, the loop
count is near instantly exceeded.
Using a time based retry means we can wait a sensible time, then gracefully
exit.
(Bitbake rev: 9f9e6d87007ea87e62495705464f4232c996a165)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing backend server implementations were inefficient since they
were sleeping for the full length of the timeouts rather than being woken when
there was data ready for them. It was assumed they would wake and perhaps did
when we forked processes directory but that is no longer the case.
This updates both the process and xmlrpc backends to wait using select(). This
does mean we need to pass the file descriptors to wait on from the internals
who know which these file descriptors are but this is a logical improvement.
Tests of a pathaolgical load on the process server of ~420 rapid tasks
executed on a server with BB_NUMBER_THREAD=48 went from a wall clock
measurement of the overall command execution time of 75s to a much more
reasonable 24s.
(Bitbake rev: 9bee497960889d9baa0a4284d79a384b18a8e826)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated several figures to implement some of Dave Stewart's
review feedback for the expanded section on the build process.
(From yocto-docs rev: abd78cd6eaad8173ef8f9b3376c323875e5c4542)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the bit about the bold text representing a layer.
I changed the figure so I am not following that convention.
(From yocto-docs rev: 119b64be029e15e5c588a5e6c8dd9e0ac1a79c8c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Applied review comments to the package splitting section in the
section that digs deeper into the build process. This involved
updating the figure that resides in both "figures" directories
of the ref-manual and the mega-manual. Also updated supporting
text throughout the section per Paul's comments.
(From yocto-docs rev: 34e3610d0c6912530f678e9f1fa4587aaaf9fc70)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We run the ping test as soon as we reach the login prompt.
But sometimes (seen in sato systemd) we end up with link down/link up stuff like:
qemux86-64 login: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
The logic behind ping -w 30 -c 1 was to wait at most 30 seconds
for at least one reply, but there is a catch: reply doesn't seems
to be echo reply but any reply (non-reply means loss not network error)
ping's man page:
-w deadline
Specify a timeout, in seconds, before ping exits regardless of
how many packets have been sent or received. In this case ping
does not stop after count packet are sent, it waits either for
deadline expire or until count probes are answered or for some
error notification from network.
Just when the link up/link down happens ping returns:
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
and exits sooner than the 30 seconds timeout.
This patch should do what was originally intended (wait at most
30 seconds for at least one reply).
(From OE-Core rev: 56d144fd22d37189e49cdf3032afb00f0be469c6)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are back ports of 2 patches from upstream to address
CVE-2011-4944
CVE-2013-4238
(From OE-Core rev: 4606eab53e8eff57d6369ea20a5ea63916ea3ea7)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches are backported from upstream since it might be risky to update right now
They address the following CVEs
CVE-2012-6329
CVE-2013-1667
(From OE-Core rev: b6c286c447e50fe499f03b64c6be80ac18504265)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add dependency on lzo acl e2fsprogs to fix the below building failure
1. commit b268a417259b9[add lzo compression support to restore] needs lzo
cmds-restore.c:30:25: fatal error: lzo/lzoconf.h: No such file or directory
2. btrfs-tools includes <sys/acl.h> which is provided by acl
btrfs-convert.c:32:21: fatal error: sys/acl.h: No such file or directory
3. btrfs-tools always needs e2fsprogs
btrfs-convert.c:44:28: fatal error: ext2fs/ext2_fs.h: No such file or directory
(From OE-Core rev: 51bb56a19f03e341a0b46199dddbbc3e9b209904)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* http://gcc.gnu.org/bugzilla//show_bug.cgi?id=57717#c7
* fix the segfault issue of dd on e500v2 targets
Since double-float is disabled for e500v2 targets build due to ICE of gcc-4.8.1,
accordingly %Ld format of sprintf is disabled.
Address Bug 4910 - [p1022ds]urandom: segmentation fault
(From OE-Core rev: a4fefac26d91bc56d5d28e1c9973a189d2509d45)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fftw is autodetected from sysroot, add PACKAGECONFIG to make it deterministic
(From OE-Core rev: 5e00319ea942764ed2e7d6bc8c74e5d48166231b)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the following configure error:
configure:23490: error: radeonsi and r600g require libelf when using LLVM
(From OE-Core rev: 43e7f168c84128b5d48bbfde9d6c07f2fb656b00)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The incorrect validation prevents connection to the NAP service on another
device.
(From OE-Core rev: 895a0840e82ddfd05c4441b7f8f358e27e6cb38a)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the following new behavior resulting from the create_wrapper
fixes:
llc[11]$ ../poky/scripts/oe-setup-rpmrepo
/usr/bin/env: nativepython: No such file or directory
(From OE-Core rev: ce37ef05c14ba28773823d1f14f629c37c76d827)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Try and avoid errors like "ERROR: database table is locked: PRMAIN_nohist"
by retrying if we see the string "is locked".
(Bitbake rev: 1a175b51f80d13f747b653d29e9c0d2201b5109c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a better value that the earlier infinite timeout yet still
allows for servers with high loads. It does mean the bitbake process
can hang at exit for the timeout period but that should never happen
and only happened for me in some test cases which wouldn't happen
in normal use.
(Bitbake rev: ab8d926b9bc27c58011e7db9327e031ac76ba34b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It should be possible to run a build anywhere on the filesystem and have
bitbake find the correct build directory if its set somehow. The BBPATH
variable makes perfect sense for this usage. Therefore use any available
value of BBPATH to search for conf/bblayers.conf before walking the parent
directory structure.
This restores the option of being able to run bitbake from anywhere if
the user has set things up to operate in that environment.
(Bitbake rev: e86336b3fe245bc97fe74c9b9d6a21d38a536fb7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By definition, bblayers.conf is at the top of the build tree. We'd like
to support running bitbake anywhere within that build tree but TOPDIR
gets set to wherever cwd is. Change the code to reset TOPDIR
to the top of the build directory.
This shouldn't break anything but does make the system more usable.
(Bitbake rev: b266db27de0bba19a418e4d42e870649136b116b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was never a particularly useful browser and is a dead codebase, retire
it and suggest midori instead.
[YOCTO #2318]
(From OE-Core rev: 3883d2cb03fb79fa39a7d85505c79784a996f178)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iptables rules for the tap interface are added by runqemu-ifup
everytime we use runqemu to start a qemu target. But it's not cleaned
up when runqemu exits.
This patch cleans up the remaining iptables rules for the tap interface
in runqemu-ifdown.
[YOCTO #5047]
(From OE-Core rev: ef38a0aed35357d035ca587162158cd2f55b958f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should provide the user more information if a preconfigured tap
is used. This is because the user might have manually set up the tap
interface to be used by other qemu binaries.
So at a minimum, we should let the user know how to make runqemu skip
that tap interface.
[YOCTO #5047]
(From OE-Core rev: ec08d92641cc51c567cc3745937b1839d3faa095)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu-ifup and runqemu-ifdown should be pairs. If we're using a
preconfigured tap interface, the runqemu-ifdown should not be invoked
to bring it down.
(From OE-Core rev: f60f215f74b5fe5a43943c9d3ccdbe0fa06b7828)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently syslog behaviour changed for systemd images (log
it's in a buffer not in /var/log/messages), account
for the new stuff.
(From OE-Core rev: 32576c4cc1621fa3013eac66c7caaa1e1fd14995)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Run list-packageconfig-flags.py on wrlinux's platform in which
the oe-core layer and bitbake layer in different directories:
----
../layers/oe-core/scripts/contrib/list-packageconfig-flags.py
Traceback (most recent call last):
File "../layers/oe-core/scripts/contrib/list-packageconfig-flags.py", line 28, in <module>
import bb.cache
ImportError: No module named bb.cache
----
The script import bb module from bitbake lib dir, the previous
lib dir was hardcode and only worked on poky but not for others.
In this situation, look for bitbake/bin dir in PATH could fix this issue.
[YOCTO #5060]
(From OE-Core rev: 9e749c430f97b1a30cdf0c13dacd2a985ef7b433)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, it tries to run ./libtool, not the sys-prefixed libtool, which
fails, resulting in dynamic modules being disabled, which in turn results in
compiling the immodules directly into the gtk+3 library.
I tried switching it to using $LIBTOOL rather than hardcoding the path, as
LT_INIT sets LIBTOOL, but it didn't work, I didn't have time to dig further,
and this gets the job done for now.
(From OE-Core rev: f74e456772fc80c2333fbdf57c629a18412375e8)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When qemu doesn't start or runqemu errors out
(some wrong option passed or sudo needs a password for setting tap) we
want to display the output but oe-core commit 9de7fe11967576f4a8b24e653c6b9a02e5f6d85b/
poky commit 51588936d4
changed the kill method and broke this code, so let's fix it.
(From OE-Core rev: 923d4bd548911caa0b419c10905895af1e8e7026)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update lttng-ust to version 2.2.1 to correspond to the LTTng 2.2
"Cuda" - Tracer toolchain stable release.
This also removes all the local lttng-ust patches, which are now
upstream.
(From OE-Core rev: 3f856556972617560b24cc86bfab027bed83bd49)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update lttng-tools to version 2.2.3 to correspond to the LTTng 2.2
"Cuda" - Tracer toolchain stable release.
(From OE-Core rev: 303abf7f2d8e79e8d14ce5b9aff287347aae43be)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe builds the two utils which are unpackaged.
(From OE-Core rev: a8212a5170940b9ba9ca7a594b65939b06aac86c)
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Liming Wang
Stefan Stanacar
Paul Eggleton
Ross Burton
Richard Purdie
Cristiana Voicu
Alexandru DAMIAN
Scott Rifenbark
Saul Wold
Roy.Li
Jonathan Liu
Chunrong Guo
Peter A. Bigot
Jackie Huang
Chen Qi
Hongxu Jia
Christopher Larson
Tom Zanussi
Andrea Adami