o Add C4 specific instructions
o Replace poky with core
o Correct a kernel version typo
o Clarify some language to avoid confusion encountered during testing
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Zhao Yi <yi.zhao@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Jeff Osier-mixon <jeffrey.osier-mixon@intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Without this, compiler errors such as:
configure:33440: i586-poky-linux-gcc -march=i586 --sysroot=/media/build2/builds/rptest/b2/tmp/sysroots/qemux86 -o conftest -D_REENTRANT -Wl,-O1 -Wl,--as-needed conftest.c -lpthread >&5
/media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/as: /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../../usr/lib/libz.so.1: no version information available (required by /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/as)
/media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/ld: /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../../usr/lib/libz.so.1: no version information available (required by /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/ld)
can be see. This is due to the compiler being built against the system
zlib, before zlib-native is built and in the sysroot. Once that has been
built it can confuse the linker depending on the relative library versions.
(From OE-Core rev: a04d50a0318cd16d5fb02a625d739e03b94e42b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Seeing warnings like:
WARNING: No bb files matched BBFILE_PATTERN_yocto '^/xxx/meta-yocto/'
are not encouraging to users and we shouldn't show these if we found
.bbappend files (but no .bb files). This change stops these warnings
from appearing.
(Bitbake rev: 48899fe7b3791dd897968f44c317e98bad14e146)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tracing down signature changes and dependencies is hard unless the complete task
chain can be evaultated. Since we have the data available at task exeuction
time, writing it to disk makes sense.
This change is suboptimal internal knowledge stamp_internal() has leaks into
make_stamp() and the concepts used by this code need revisiting but the change
brings enough usability benefit to warrant its inclusion despite that.
Addresses issue [YOCTO #1074]
(Bitbake rev: 139b8a625818225c358a1b8363518d7ed6913188)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* PACKAGEFUNCS ?= "perform_packagecopy \
${PACKAGE_PREPROCESS_FUNCS} \
our py_package_preprocess is called after perform_packagecopy which does copy D to PKGD
so we change it to target version in D (image/) before populating sysroot (sysroot-destdir/)
while keeping Makefile.sysroot version in PKGD which was created before calling
py_package_preprocess, so both package for runtime and sysroot end wrong
* I haven't seen this problem on faster builder, I guess because do_package and do_populate_sysroot
can run in paralell and I was lucky that do_populate_sysroot finished before py_package_preprocess
was started, but if you build python step by step -c package first you should see it every time
* here is proof that with PKGD it works better:
$ bitbake -c cleanall python
$ bitbake -c install python
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
grep: ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile: No such file or directory
grep: ./package/usr/lib/python2.6/config/Makefile: No such file or directory
grep: ./sysroot-destdir/usr/lib/python2.6/config/Makefile: No such file or directory
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
$ bitbake -c package python
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./package/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
grep: ./sysroot-destdir/usr/lib/python2.6/config/Makefile: No such file or directory
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
$ bitbake -c package python
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./package/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./sysroot-destdir/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
* without this patch we have /usr/lib/ in image/sysroot-destdir and SYSROOT_LIBDIR in package/packages-split
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./package/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./sysroot-destdir/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
(From OE-Core rev: 2ba5ce85dcc3c6812b10073bfc4ab600ca169df1)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #886]
This address 2 needs after the IMAGE_ROOTFS_SIZE is cleaned up, by
removing the _ext2/3 overrides it allows for a cleaner override
using IMAGE_ROOTFS_SIZE to create a large rootfs, or by setting the
IMAGE_ROOTFS_EXTRA_SPACE, will allow for extra space allocated in Kilobytes
above the base size (determined by du of the rootfs * IMAGE_OVERHEAD_FACTOR,
default of 1.3).
(From OE-Core rev: 367934ada7c081ba3fc95f02dc14c7d6f97bfccb)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This basic cleanup removes the _ext2/3 overrides from places they
no longer belong since they did not allow further overrides. In doing
this the core-image-minimal* recipes can now set a reasonably small
rootfs so that it's a realistic size for minimal.
The new default for minimal is 8M and will be adujsted upward by the
IMAGE_OVERHEAD_FACTOR (default of 1.3).
This also fixes the ROOTFS_SIZE usage in the IMAGE_CMD_<fstype> code
(From OE-Core rev: d3f6e1e6106ab539e73c19037915b2e4a5f2efa9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Currently we are passing -jN or -j N flags to eglibc makefiles
however eglibc uses a make variable called PARALLELMFLAGS
to pass information about parallel build to sub-makes
* Currently make install ran without parallelism but now
it should have parallel building flags passed to do_install
correctly which inturn should improve build time of
eglibc on systems using parallel build -j with values > 1
(From OE-Core rev: 05f017dc6878908cf55901f8a74c738f3bece077)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently all components of elfutils dont compile with uclibc
but elfutils is one part which is needed by other recipes e.g.
gcc 4.5 to compile. we make adjustments so that when compiling
for uclibc targets it _only_ builds and packages libelf
use --enable-uclibc only when building for uclibc targets
The supporting patch is also needed for compiling with uclibc
to specify -lintl and -luargp on linker commandline
Add missing inherit on gettext
(From OE-Core rev: e21267f1837b25fec4443dbf4367e501639541bd)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gst-plugins-base requires the libvorbisidec library which is part of tremor
(From OE-Core rev: 358ffed8f61d30b5b434b3745a13930906bcfefe)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the autotools patch is not needed anymore. The code which the patch was patching
is removed, and there is no use of the patch now.
(From OE-Core rev: 07c4246e107af50d6a9333445259b083f98ebdc0)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing REMOTE_URL and REMOTE_REPO parsing made assumptions regarding
the git URL format used for the known repository types. In fact, both of
these ssh URL formats are valid for all the known repositories. Specifically:
ssh://git@server/repository/path
git@server:repository/path
Generalize the parsing to work with each of these for all push URLs matching
*@*. Tested with the following URLs:
ssh://git@git.pokylinux.org/poky-contrib
ssh://git@git.pokylinux.org/poky-contrib.git
git@git.pokylinux.org:poky-contrib
git@git.pokylinux.org:poky-contrib.git
(From OE-Core rev: 861c288e353e917374de938c4e5e927e116cd56c)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run gs on mpc8315, it fails with:
GPL Ghostscript 9.02: ./psi/interp.c(291): Fatal error -20 in gs_interp_init!
It is caused by cross compile.
Accoding to the ghostscript document on:
http://pages.cs.wisc.edu/~ghost/doc/cvs/Make.htm#Cross-compiling
it needs some manual work, so import patches from WindRiver Linux.
Update to using oe way to add arch.h, thanks to Richard.
(From OE-Core rev: debee5134a2ca505e968a6ddfb5c2f6434e3007a)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To be able to install into a disk, mtools are required thus we add it
as rdepends of 'syslinux' package.
(From OE-Core rev: 341fda24f968b225ae3d4bca5d7d03a8e1778494)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
git send-email has the correct check on it. Basically the From is
taken from the git 'user' and 'email' config values and in case
'sendemail.smtpserver' is not provided it defaults to use local
sendmail command.
(From OE-Core rev: b75cf390d75957f5b5718892942f76fc4295270f)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1062]
Due to failing fetch updated recipe and SRC_URI to use .bz2,
(From OE-Core rev: 87cf2da6373676293f2fdaaebbacc6890235368d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 036cf3cd11b3a6836b77f5ffa760ceee6b71b1ef missed the needed
brackets to handle more then a type of exception.
(Bitbake rev: abecbb4c0af83c6b4ee248b0f03b779f84b13390)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the example for building an image the command
'source poky-bernard-5.0/oe-init-build-env poky-5.0-build' was used.
Torsten Scheck notified Jeff Osier-mixon and sent the fix to
change to 'source poky-bernard-5.0/poky-init-build-env poky-5.0-build'
I made the change.
(From yocto-docs rev: b96646efb203e482d53d922fb120672df5a09966)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUGID#_1083 - I added the -k option as part of the bitbake command in the
example that builds an image. I did not explain it as that is beyond
the scope of the quickstart. I did however point the user to where
they can find information on it.
(From yocto-docs rev: 620351d38c67ff14cefc7a52bbc0e98789011677)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section 2.1.1 BitBake I added a paragraph at the end of the discussion
about BitBake explaining the benefits of the '-k' and '--continue' options.
(From yocto-docs rev: 409e01cedbe8d93c29856fa2a49d5f9db91f5201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bring in the uclibc recipes from meta-oe they have been well
tested by now.
Delete 0.9.30.1 recipes
(From OE-Core rev: ac60a936e737680c16b287a3dab6aa285d87c5c0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Things like 'distcc' and 'bash' are not essential to booting a qemu machine.
(From OE-Core rev: 65f1109faf9548c5d083089561d5b9d99dbacc83)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We enable gtk/gnome in distcc that code uses loadavg()
a function unimplemented in uclibc. Therefore for uclibc
we disable gnome and gtk+ features in distcc
(From OE-Core rev: 5436acabdf61f249dc1646eaa85b2654bc627aed)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
grep-2.5.1a: update upstream status of patches
tar-1.17: update upstream-status of patches
at-3.1.12: update upstream-status for patches
cpio-2.8: update upstream-status for patches
(From OE-Core rev: fbc0fdbbb759b37d97de6f28daf04055531fbe0b)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now the kernel issues related to gcc 4.6.0 for mips & ppc are fixed.
(From OE-Core rev: 6b19aceb48d0cec364a7eab1bb1ca085f5c94b25)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This includes some utility functions for dealing with groups of packages
defined in the metadata. Metadata syntax:
PACKAGE_GROUP_<group> = "<list of packages>"
If the packages in the group are optional:
PACKAGE_GROUP_<group>[optional] = "1"
(From OE-Core rev: 4df212e9c2a1dd7c80d180fd13b67e9f2799d3e1)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This can be useful if we need the imports from another config parsed event
handler, and can't rely upon the base one running before that one.
(From OE-Core rev: dc579ce4dcf9a3743ced9eae4fe510a079961faf)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current mechanism makes it easier for classes to add new oe modules to be
automatically imported, and thereby made available to python snippets (${@}).
(From OE-Core rev: 0c560a2a7954412f714db86b1aaadb7acbe72d1b)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This implementation consists of two components:
- Type creation python modules, whose job it is to construct objects of the
defined type for a given variable in the metadata
- typecheck.bbclass, which iterates over all configuration variables with a
type defined and uses oe.types to check the validity of the values
This gives us a few benefits:
- Automatic sanity checking of all configuration variables with a defined type
- Avoid duplicating the "how do I make use of the value of this variable"
logic between its users. For variables like PATH, this is simply a split(),
for boolean variables, the duplication can result in confusing, or even
mismatched semantics (is this 0/1, empty/nonempty, what?)
- Make it easier to create a configuration UI, as the type information could
be used to provide a better interface than a text edit box (e.g checkbox for
'boolean', dropdown for 'choice')
This functionality is entirely opt-in right now. To enable the configuration
variable type checking, simply INHERIT += "typecheck". Example of a failing
type check:
BAZ = "foo"
BAZ[type] = "boolean"
$ bitbake -p
FATAL: BAZ: Invalid boolean value 'foo'
$
Examples of leveraging oe.types in a python snippet:
PACKAGES[type] = "list"
python () {
import oe.data
for pkg in oe.data.typed_value("PACKAGES", d):
bb.note("package: %s" % pkg)
}
LIBTOOL_HAS_SYSROOT = "yes"
LIBTOOL_HAS_SYSROOT[type] = "boolean"
python () {
import oe.data
assert(oe.data.typed_value("LIBTOOL_HAS_SYSROOT", d) == True)
}
(From OE-Core rev: a04ce490e933fc7534db33f635b025c25329c564)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- KERNEL_VERSION may contain characters unsuitable for package
names, e.g. underscores. Use legitimize_package_name to replace
those characters.
(From OE-Core rev: 8c6bf9f6775fc5aaa8bc2c77924c95a00f1c1890)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart
Richard Purdie
Saul Wold
Martin Jansa
Paul Eggleton
Phil Blundell
Khem Raj
Nitin A Kamble
Kang Kai
Koen Kooi
Otavio Salvador
Scott Rifenbark
Chris Larson
Andreas Oberritter