this information was missing in the appendix.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 64ea0871e0a6cef45259502ff26e1c5b5a66cac1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Information about this directory was absent in the manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 64e5f5a403e4c8494885c7da504194d1baecb0ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The setting is the same in all recipes, so move it to
the shared settings in u-boot.inc
Since FILESDIR is also being phased out, use the FILESPATH
setting as suggested by Richard Purdie.
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 1b78904b115b50172cf82948d8a68dc3a98005ce)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Variables which used multiple overrides and the append/prepend operators were
not functioning correctly. This change fixes that.
This fixes the testcase:
OVERRIDES = "linux:x86"
TESTVAR = "original"
TESTVAR_append_x86 = " x86"
TESTVAR_append_x86_linux = " x86+linux"
TESTVAR_append_linux_x86 = " linux+x86"
[YOCTO #2672]
(Bitbake rev: dc35a2e506e15fb7ddbf74c3b3280e9e83ab33bb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, target and cross recipes end up with different sstate
checksums for shared work directory tasks which is bad in the case of gcc.
It leads to multiple fetch/unpack tasks against the shared directory
which ends up with build failures/races.
(From OE-Core rev: 793ce6cd9aa632e0f13789c8293770a86085d28d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We added the autoconf cache line a while back to ensure that configure doesn't
poke into some hardcoded host paths looking for things it shouldn't. Applying
it as part of do_configure wasn't getting it to the do_compile tasks
where much of the configure scripts are run by gcc. This changes it to a simple
export to ensure it reaches the places it needs to and truly gets rid of
the cross compile badness messages from the logs.
(From OE-Core rev: af58d5c3a5c5e632aa20b1d007d47dbbfb4ed6e6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 0b79c730f3e5c3c5329e439dffd137f2605b6cba)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ppp-watch requires it.
x86_64-poky-linux-gcc -m64 --sysroot=/intel/poky2/builds/fetch/tmp/sysroots/qemux86-64 -O2 -pipe -g -feliminate-unused-debug-types -Wall -D_GNU_SOURCE `pkg-config glib-2.0 --cflags` -c ppp-watch.c -o ppp-watch.o
Package glib-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `glib-2.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'glib-2.0' found
ppp-watch.c:78:18: fatal error: glib.h: No such file or directory
compilation terminated.
make[1]: *** [ppp-watch.o] Error 1
make[1]: Leaving directory `/intel/poky2/builds/fetch/tmp/work/x86_64-poky-linux/lsbinitscripts-9.03-r0/initscripts-9.03/src'
(From OE-Core rev: 488610f4a5b7591a989ff1a6137f276a85fd7a85)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu.inc does a straight assign to MACHINE_FEATURES so overwriting the
preceding append to MACHINE_FEATURES, so the MACHINE_FEATURES append
needs to be moved after the include.
This situation came about as a result of commit 71a4bf386:
qemumachines: Enable xserver-xorg as default xserver
For qemux86 and qemux86-64 include qemu.inc after defining XSERVER
which missed this side-effect (and maybe others).
(From OE-Core rev: 4f336e5f416df382fdd2b405314741164d537b22)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libexec/perf-core contains all the pre-canned scripts and modules
needed by both the Perl and Python bindigs. Add libexec/perf-core
along with all the pre-defined perf scripts underneath it.
(From OE-Core rev: 00f9e8aed9f111d351c2dc71cd8605ccbd11f68f)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support to enable the perf Perl binding.
The build depends on perl-native to retrieve the configuration
settings needed for the binding. cpan-base adds some useful functions
like is_target() and get_perl_version() that we need for
PERLCONFIGTARGET and related settings, which allow us to use the
target's Config_heavy.pl settings for ExtUtils:Embed when building for
the target.
Also adds the perl-modules dependency to give the target the perl
modules that scripts using the binding need.
(From OE-Core rev: 73a8eed010a821fc4f5c0e71ef749938ed780b44)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support to enable the perf python bindings. The combination of
these changes and the changes in the python-config sections in the
kernel Makefile enable all the python bindings currently available in
perf.
(From OE-Core rev: 487c3a72f0ac7121b79d2f78b81f1d4732bc258a)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
archlibexp in the snapshotted config.sh needs to be relative to
staging dir - it gets generated into Config_heavy.pl as one of the
settings and is used by ExtUtils::Embed during the target build.
The substituted setting doesn't make it into the target package
because it's removed by perl_package_preprocess() before packaging.
(From OE-Core rev: b647d2ab84ff0eb94f4b6a1b731d74aaf8c60b9d)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some config.sh substitions, we'd like to be able to use
STAGING_DIR_HOST; add @STAGINGDIR@ to allow for that.
(From OE-Core rev: cc594be0877b2a6616453c402db0a58ef265bc8d)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Things like ExtTools expect to find libperl at the original
(${libdir}/perl/${PV}/CORE/libperl.so) location, so keep it there but
symlink to it for the original (?) reason.
(From OE-Core rev: deb5d5ededfc404f4c54b18f3dcf8192e1c835e0)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On x86, an ELF image file may be stored as a coreboot payload.
The image file is constructed, using the mkelfimage utility,
from a kernel and an initrd.
(From OE-Core rev: 93e9de4e27919f59b6783d53f314df6e49ccb436)
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow the reporting of these errors as either WARNINGs (default)
or ERRORs if installed_vs_shipped is added to the ERROR_QA of the policy
file (such as a <distro_name>.conf file.
V2: found the code I had intended to send instead of that other junk,
was just not watching what I pushed on that one, sorry. (this is edit in
no in the actual commit message)
(From OE-Core rev: 20d4205a4e408b6a99db392d4df458156113106a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a clean-up following the recent addition of PN-bin
to bitbake.conf and lib_package
(From OE-Core rev: 4c41954227144606d2d22fbdf07231f4c7207ac5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a clean-up following the recent addition of PN-bin
to bitbake.conf and lib_package
(From OE-Core rev: b9553b5fe8e06032770fd34e26ab97e6834292ab)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a clean-up following the recent addition of PN-bin
to bitbake.conf and lib_package
(From OE-Core rev: b3bfeec4db7d8fa6b8cc4bb2153c7f94cbe1dcc3)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a clean-up following the recent addition of PN-bin
to bitbake.conf and lib_package
(From OE-Core rev: 42dfedc01beb90adfa222a0c671ca8876849f938)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a clean-up following the recent addition of PN-bin
to bitbake.conf and lib_package
(From OE-Core rev: 6597f7c77e1ccb21d73f8e3cec25bb27a901b500)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since this check effective is not a change becase the package
order that was in this file has not really changed no PR Bumps
are needed.
(From OE-Core rev: d807d5dd5bd0e161057ee115256dc050dbe8609b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By doing this we can easily add addtional packages that can be
greedy before PN, but after some of the other standard packages.
This will also allow us to simplify the lib_package class to set
this variable.
(From OE-Core rev: b41b2bc584756956a48c9c5f91e7337e821105b2)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1614]
Add the kernel headers to the kernel-dev package. This packages what was
already built and kept in sysroots for building modules with bitbake.
Making this available on the target requires removing some additional
host binaries.
Move the location to /usr/src/kernel
Before use on the target, the user will need to:
# cd /usr/src/kernel
# make scripts
This renders the kernel-misc recipe empty, so remove it.
As we use /usr/src/kernel in several places (and I missed one in the
previous version), add a KERNEL_SRC_DIR variable and use that throughout
the class to avoid update errors in the future.
Now that we package the kernel headers, drop the
kernel_package_preprocess function which removed them from PKGD.
All *-sdk image recipes include dev-pkgs, so the kernel-dev package will
be installed by default on all such images.
(From OE-Core rev: 6125ea40d4483965f793bd847b3ce14b668a5b1e)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With recent kern tools changes, having a meta branch is opt-in. The
other linux-yocto recipes were updated, but linux-yocto-tiny was
missed.
Without specifying a meta branch, the kernel configuration audit
won't return any useful results, and throws a warning message.
WARNING: Can't find any BSP hardware or required configuration fragments.
WARNING: Looked at //cfg///hdw_frags.txt and //cfg///required_frags.txt in directory: //cfg//
NOTE: package linux-yocto-tiny-3.2.18+git1+ee78519365bdb25287703bbc31c06b193263c654_1+27b68a93eb791e830da8d3a2c0fc99780897ad89-r3.0: task do_kernel
(From OE-Core rev: 29dbe7d7ba66c66e9e5c8dc438f89d9b46c509a0)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating preempt-rt in the 3.4 kernel to the latest upstream version
3.4.4-rt13.
(From OE-Core rev: f5ed8bc876fd24e4f08d29da06454037eec818e6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the kernel version to v3.4.4 and importing the following
meta branch commits:
9b7c74b meta: bump kver to v3.4.4
8231dec ck: relocate config post patches
26b965e net_sched: remove dupicate configuration option
df8bf19 meta: remove non applying routerstationpro patch
292d8ea arm: import upstream versatile io.h fix
f4824b1 net_sched: select ACT as a dependency of INGRESS
30ae722 cgroups: delete obsolete namespace option
51f94f0 meta: add qemumipsel mapping
Built and boot tested on qemu*
(From OE-Core rev: 3d33b8c8b3be5dcdac30c115b9fec427269db2b4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch with a board description and configuration
that can be found from the linux-yocto recipes without doing a
MACHINE -> KMACHINE mapping.
From the meta branch commit:
The mti malta board description for a little endian config can't
be found by default unless it has a matching KMACHINE, or the
KMACHINE is set in a kernel recipe. In this case, it is easier to
just add qemumipsel in the KMACHINE list, so the recipe doesn't
need to do the mapping.
The little endian mips support reuses everything but the endianess
settings from the big endian mti malta board emulation.
This change adds the required mappings and SRCREVs, but does not
update the machine compatibilty, since official support is still
pending. The compatibility can be set in addon layers until that
time.
(From OE-Core rev: de2535b2bb47b80bdaeb3053b0ac0d1bbb9c5d53)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pcmciautils is the appropriate PCMCIA package these days.
(From OE-Core rev: 5066f7e9750253bc4678f2884e15f0333e60932b)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Cristian Iorga
Paul Gortmaker
Martin Jansa
Richard Purdie
Robert P. J. Day
Saul Wold
Tom Zanussi
Raymond Danks
Mark Hatle
Darren Hart
Bruce Ashfield
Laurentiu Palcu