Since we're updating the tune file format, it makes sense to abstract
the compiler tune arguments at this point too. This means that should
these need to be overridden at any point, the original values can
still be obtained in a similar manner to the other TUNE* variables.
Whilst this isn't strictly necessary for any current need, its likely
good practise to standardise this behaviour.
(From OE-Core rev: 3a3c69a1bc3cf0b6f6a3b13d86c12ed21798d48e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is currently consideradble confusion over how the tune files operate
and how these interact with the rest of the build system. This update/overhaul
changes things so the tune files are primarily resonsible for setting:
TUNE_ARCH - What was formerly set as TARGET_ARCH and is the value that
represents the architecture we're targetting.
TUNE_PKGARCH - The value that represents the tune confuration that this set
of tune parameters results in.
This allows the significant improvement that the core can now always determine
the target architecture value, even when TARGET_ARCH needs to be reset to
something different and likewise, there is one package architecture variable
the core can reference allowing simplification of the BASE_PACKAGE_ARCH, PACKAGE_ARCH
and FEED_ARCH variables.
(From OE-Core rev: a10de4cf8b424ee95c8e283e75d486be5b3b8eac)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the ability to dynamically change the library directory from "lib" to
other values. This allows the tune files to specifiy altnerative ABIs
which can be dynamically enabled by the multilib BBCLASSEXTEND code.
A variety of approaches have been attempted with this, the immediate
expansions in cross.bbclass being problematic as they are they are expanded
before the bbclass extend event hander runs. This approach ensures the
${baselib} variable is retained in the expressions resolving that complication.
Derived from some ideas from Mark Hatle.
(From OE-Core rev: aeea22da699b276a97ca1a17e3c53176c9afd9de)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The MPC8315E has a e300c3 core in it with 'classic' or normal PPC
floating point.
'SPE' floating point is what exists on the e500v2 core.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This function is needed by some of the early .conf setup we need
to improve the machine/tune files in Openembedded. We need to add
it here since the location in oe.utils can't be accessed until after
base.bbclass parses which is too late for our needs.
(Bitbake rev: abc67ed6921c98ed581f101ec1acc589fd9ce7e9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The plugin got installed into the wrong dir leading to:
gdm-session-worker[515]: PAM unable to dlopen(/lib/security/pam_gnome_keyring.so): /lib/security/pam_gnome_keyring.so: cannot open shared object file: No such file or directory
(From OE-Core rev: f31ae697803bad73052066f7b39317f8a01695d4)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pulled common options that are needed for powerpc64-linux to build
out of powerpc32-linux and put them into powerpc-linux.
(From OE-Core rev: d5a42bb0382243d12388a0e0b18461c58d12c60e)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use ac_cv_sizeof_* from eglibc as starting point for powerpc64-linux
site info. We will refactor common bits that are needed out of
powerpc32-linux based on build issues.
(From OE-Core rev: 0f094d208b4a6ea21fb69a3e770f5bf742bf2155)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we have a unique powerpc32-linux config, we share powerpc-linux
between ppc32 & ppc64.
(From OE-Core rev: 405a9a90f756c215e7454a4231179bc49c77ad1d)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
powerpc-common was really Linux PPC32 specific. So move all the options
in it to powerpc32-linux and we can refactor out common bits shared
between into powerpc-linux and powerpc-common.
(From OE-Core rev: 6ba64ae1030c879021f0ee0789bee4f8d3c135c0)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If try to build for an ppc64 target openssl will fail to build since
the configure script didn't know how to handle a 'linux-powerpc64' target.
(From OE-Core rev: 9c98851951ba79a5e1a6a7daa2a3552dcf3adf86)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This Fixes bug: [Yocto #1254]
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-1015
Issue #2254: Fix CGIHTTPServer information disclosure. Relative paths are
now collapsed within the url properly before looking in cgi_directories.
(From OE-Core rev: 43e7ec07065e58128819b0bb359358ce42628672)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1a9ae8ea8c0540d41b8ff4d95c0420d6df754634 removed -uclibc
hence it got all wrong for powerpc. uclibc TARGET_OS
for classic ppc is linux-uclibc and for ppc w/ SPE its
linux-uclibcspe
(From OE-Core rev: 6c4ddd2d532ea91cd5752a7e56e8487cca1ac1e3)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ignore not just build/* but any build*/* cases.
(From OE-Core rev: 36d0edd2f4c27b4c1040ba9d9ae52eee634cc95c)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is not needed upstream since the code using sigsetmask
has been deleted.
(From OE-Core rev: 5b43339e2cc7c3f556665260ad7f2a5ee200e0af)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required especially on uclibc systems where BSD compatible
obsolete functions are disabled by kconfig. Therefore we check
if the macro is undefined then we define it. Therefore eglibc/glibc
builds should work as they use to.
(From OE-Core rev: 60d91ffc6367fe11ced5890240c6b65ada66621e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1261]
Updating the SRCREV to pickup some branch creation fixes that
were causing an invalid branch name to be used on a repository
that couldn't support it (i.e. standard/base on a 2.6.34).
With this the 2.6.34 and 3.0 -rt branches will build.
(From OE-Core rev: e1df34c9d4614adc04528b73a8860e973c5db54d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 83a1a46b707895c564b8dc393917b09cc283bf27)
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Establish the infrastructure to start more comprehensive linux-3.0
testing. With this in place, the populated linux-yocto 3.0 can
optionally be built for supported machines.
Note: this commit does not change the default for any targets and
as such, it would need to be explicitly set as the preferred version
to be built. The staged introduction allows some remaining issues to
be solved, while making this available. Subsequent commits will be
done to switch qemu machines ones they have been validated. If the
default for a machine is not this kernel, consider it best effort.
(From OE-Core rev: 6b9379e9d409713e5bd9bb46b38968d41cd834e1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For kernel's that use a split source/object build the copy
of defconfig to {S} in the base kernel class is problematic.
The previous solution for this was to override the do_configure
of the base kernel class in a subclass. While this is still
a viable/valid option, it does mean that changes to the base
do_configure will be missed.
The solution to this is to copy a defconfig to {B} which is
typically the same as {S}, so most kernel recipes won't see or
care about this change.
With this change in place, linux-yocto.bbclass can drop its
override of do_configure.
Tested with linux-yocto and oe linux recipes.
(From OE-Core rev: 4f03d922ce32f602a5a407cf422d82a0d036e4a0)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As reported by Koen Kooi, the LICENSE for linux-yocto can be tightened
up to specifiy the particular version of the GPL.
cc: Koen Kooi <koen@dominion.thruhere.net>
(From OE-Core rev: 0b163efe5536555867f71561914414648b08ed24)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It needs a different patch for 1.13.1 for autoconf'ing
Rename files to libiconv-1.11.1 and have a separate
directory for libiconv-1.13.1
(From OE-Core rev: f175e4f28aa835abef8c3d5e2065054416692418)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since Hob only needes package dependency information, we can
create a new version of package information retrieving methods,
remove task dependency information, so that we can greatly
reduce data loading time for Hob
(Bitbake rev: df55199209ef042e5b1ca04c4df75c7d639b51eb)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was displaying the log messages in LIFO order, which isn't what we
expect to see. Thankfully this only occurred during an early abort (e.g.
config file parsing error), but those are the cases where it's very
important to see accurate messages, to diagnose.
(Bitbake rev: b838e0f3a1b481c295f66f5c9f561fa4d51de673)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When calculating what dependencies are affected by the removal of an item
we should ignore images and tasks as they are not constructs which make
sense in the GUI.
E.g: if we don't ignore tasks and remove opkg from an image based on
core-image-minimal the fact that opkg was brought in by task-core results
in task-core and all of the packages it brought in being removed and,
eventually, an empty image.
(Bitbake rev: 205b52bfc7f28af0c50fef1f741fae6af16fb0dc)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use string.strip() as a much safer method of turning the -j value into an int
Fixes [YOCTO #1244]
(Bitbake rev: 03baee9e0a7fc15fc6c226c07c0f50df136ac5b0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New entries written to a configuration file should be on separate lines,
ensure this is the case by appending a newline to each written variable.
(Bitbake rev: bac689fc34ea55c062d60ef249b79faa35f546a1)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds explanation of the different options when asking the user
to choose between Stop and Force Stop so they can make an informed choice.
Fixes [YOCTO #1223]
(Bitbake rev: afb87a809962b756f8282c9e9fdf9b15cdb9192b)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After switching to dynamically finding the relative path for the recipe
file it's no longer to append .bb when inserting the require line into the
saved recipe.
Fixes [YOCTO #1247]
(Bitbake rev: 2d05ce4f527daa905ed64485029ebeb2b349daa6)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glib.idle_add is used so the glib module must be imported
Fixes [YOCTO #1248]
(Bitbake rev: 0ab099f6ff4cc4e92484282d2dee442e55471e0c)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When parsing multiline variables in conf files, the last character can
be accidentally removed. s2 contains new data read from the file which
may or may not end with the continuation character. It makes sense to
let the next loop iteration strip this if needed.
We don't often use multiline expressions in .conf files which is why I'd
imagine we haven't noticed this before. Most variables are quoted and
its the closing quotation which often disappears.
(Bitbake rev: 09a9146262d58dfe4a2ea4270026b90ae33f6c91)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Initial content in and the formatting complete. Some bad links fixed
also.
(From yocto-docs rev: 2461522b77c8240476a14aef8f3e94336419af56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Three issues pointed out by Robert P. J. Day.
1) Missing text for "This optional GNOME mobile-based UI, which is intended for
devices with resolution but restricted size screens ..." I re-wrote this
so it makes sense.
2) Scrubbed document for incorrect usage of openSUSE. There were three
occurences.
3) Made several changes to the example of using a pre-built image. The
arguments to the poky-qemu command did not exist (they were old). I
used existing arguments now and I also bolstered up the root filesystem
explanation a bit.
(From yocto-docs rev: 31b7a97dfd11ff50ee6c554bf8647591021fef72)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Kumar Gala
Koen Kooi
Nitin A Kamble
Khem Raj
Saul Wold
Bruce Ashfield
Mei Lei
Liping Ke
Chris Larson
Joshua Lock
Christopher Larson
Scott Rifenbark