This driver is based on Linux 2.6.39 8139too driver.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ENC28J60 is a stand-alone Ethernet controller with SPI Interface
and integrated 10BASE-T PHY.
This driver was ported from linux-3.15.
The most notable barebox driver version changes:
* add device tree support;
* drop netif_msg_*() debug level checking;
* use IF_ENABLED for checking CONFIG_ENC28J60_WRITEVERIFY;
* add mii_bus support.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for the Synopsys 10/100 Mbps Ethernet MAC used
on some ARC devices and on Rockchip SoCs.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a driver for the Ethernet ip found on Marvell Orion SoCs,
which is derived from Marvell Discovery System Controllers (MV643xx).
It is partially based on the corresponding u-boot driver.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This reorders Kconfig and Makefile for drivers/net alphabetically.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch introduces a driver for the OpenCores 10/100 Mbps ethernet
MAC core, ported from Linux kernel with small changes.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver should work with some Atheros WiSoCs:
- ar2312, ar2313
- ar2315, ar2316 ...
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
It starts the switch and provides basic access to the registers.
This driver could also work with some other Micrel switches, possibly
with some small changes.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This update adds the GIANFAR driver along with the configuration
and build files.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Straight forward port of Synopsys Designware ethernet
driver from u-boot v2012.04.01.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for KS8851 16bit MLL chip from Micrel Inc.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for the old DM9000E device is now part of the new dm9k.c driver. So,
remove the old driver source and switch all users to the new driver.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for the more recent DM9000A and DM9000B types, and keeps
support for the older DM9000E device. As this patch is more or less a complete
re-wrote of the existing driver I add a new source file instead of fixing the
existing one. In a later patch the old driver will be removed.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this rework is done in order to add a phylib and allow to have phy driver support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver is not only used on i.MX27 but on i.MX35 and i.MX25, so
rename it to a more generic name
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>