RGMII PHY modes include delayed interface modes RGMII_ID, RGMII_TXID,
and RGMII_RXID. Also check for those modes when setup RGMII mode in
port serial ctrl register.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marvell Orion ethernet IP originally is multi-port capable, but SoCs
using the IP usually have multiple single-port controllers built in.
Currently, orion-gbe driver registers each port device with a constant
name, which causes a name conflict with multiple controller instances.
This patch uniquifies port device name generation by prepending
controller's base register address to resolve the name conflict.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ePAPR defines phy-connection-type as standard property for PHY interface
between Ethernet device and PHY device. Add corresponding property check
to of_get_phy_mode.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver provides common support for accessing
the CBUS FPGA I2C lines through the gpio library.
Additional i2c bitbang driver must be enabled
in order to use the functionality of the i2c controller.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MULTI_PBL images have a built-in dtb by default. With all MVEBU
SoCs converted to MULTI_PBL images, get rid of the extra Makefile
rules for appended dtbs.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
With all SoCs converted to DT based probing, select
PBL_MULTI_IMAGES support and get rid of SoCs Kconfig
choice to allow multiple boards to be selected.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This converts Marvell Armada XP based PlatHome Openblocks AX3-4
to PBL_MULTI_IMAGES. A DT overlay is added to keep possible
barebox-specific changes separated and added to lowlevel
board init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This converts Marvell Armada XP based Marvell Armada XP GP
to PBL_MULTI_IMAGES. A DT overlay is added to keep possible
barebox-specific changes separated and added to lowlevel
board init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This converts Marvell Armada 370 based Globalscale Mirabox
to PBL_MULTI_IMAGES. A DT overlay is added to keep possible
barebox-specific changes separated and added to lowlevel
board init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
With Armada 370/XP DT files available, convert Armada 370/XP SoC init
to register basic devices from DT only. Makefile targets for dtbs will
be removed again as soon as MULTI_PBL is available.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
With Kirkwood DT files available, convert Kirkwood SoC init
to register basic devices from DT only. Makefile targets for
dtbs will be removed again as soon as MULTI_PBL is available.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This reorders images/Makefile.mvebu targets by board to ease integration
of new boards.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Timers found on Marvell Armada 370 and XP require different setup.
While timer clock on Armada 370 can be derived from a divided
reference clocks, Armada XP always uses a 25MHz reference.
This also updates compatibles to destinguish timers for both SoCs
and fixes some whitespace issues on defines.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Armada XP timers can be run from a 25MHz fixed clock. Add the corrsponding
clock and clock alias to SoC setup.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
mach-mvebu has two files containing lowlevel code. Consolidate both into
mach-mvebu/lowlevel.c. Also put the now empty mach-mvebu/common.c into
non-lowlevel obj-y as it will be used for common non-lowlevel code later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
All current boards use the same TEXT_BASE, therefore set the default
TEXT_BASE by SoC instead of by board.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Crazy things happen if there are resource conflicts and a device probe
runs dev_request_mem_region. The dev_request_mem_region returns a
start pointer which is zero. The probe function doesn't check on this
and probing the device on zero base address.
To debug this in debug log level there are many other outputs. This patch
replace the debug print to a warning printout. A conflict should
normally never happen. If there is a conflict it's much easier to see it
with this patch.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For i.MX devicetree boards the console= parameter is automatically
generated and can be dropped from the env files. If a file becomes
empty then, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The arch/arm/include/asm/gpio.h header file contains
#ifndef CONFIG_GPIOLIB
#include <mach/gpio.h>
#else
#include <asm-generic/gpio.h>
#endif
We use CONFIG_GPIOLIB=y for the only mach-versatile
Versatile/PB board so there is no need of <mach/gpio.h>.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootargs are now autogenerated by barebox and the hostname should
not be preconfigured.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This saves one second of user time on every interactive boot.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 0d6392de4a introduced a stripped
down device tree used for both white and black Beaglebone variants
that included the 256 MiB memory node from am335x-bone-common.dtsi.
This leads to the following error in the MLO:
mmu: Critical Error: Can't request SDRAM region for ttb at 9fff4000
This patch removes the (for the Beaglebone black) invalid memory size
from the common device tree and instead registers the memory bank
manually in the board file.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sebastian Hesselbarth
Sascha Hauer
Antony Pavlov
Alexander Aring
Jan Luebbe
Philipp Zabel
Herve Codina