Add mem_test routine. Useful to detect timing problems if someone
porting a new device to barebox. This test includes a data bus test,
address bus test and integrity check of memory.
This mem_test routine has as parameter start and end address of testing
space. The last parameter can skip the integrity check.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The NT disk Signature is a unique 32-bit value in the MBR allowing
to identify a MSDOS partitioned disk. The signature can be used to
specify the Linux rootfs.
This patch adds support for the NT disk Signature in the form of a
device parameter which can both be read and written.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers use blk->ops->read/write. This bypasses the caching block
layer and was never intended like this. The upper API to the block layer
is the cdev layer. This patch adds block_read and block_write functions
and uses them where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
block_read and block_write collide with a to-be-introduced
global function, so rename the file operation functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without devicetree support we print the Kernel commandline in
verbose mode. Do the same with devicetree boot aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The detection of the partition table fails when we have a barebox image
in the MBR. So check only for partition table types.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
memory_display is a function which should generally be available.
Currently it depends on memory command support being compiled in,
so move the function to a separate file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a C interface to set and get the bootsource instance:
int bootsource_get_instance(void);
void bootsource_set_instance(int instance);
Also export the shell variable "bootsource_instance".
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This way the bootsource is exported to the environment, even if unknown.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch seperates the imx independent from the arch independent code. The
following functions and enums are renamed:
- imx_bootsource() -> bootsource_get()
- imx_set_bootsource() -> bootsource_set()
- enum imx_bootsource -> enum bootsource
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For making the same binary executable on different SoCs which have
different DRAM addresses we have to be independent of the compile
time link address.
This patch adds relocatable binary support for the ARM architecture.
With this two new functions are available. relocate_to_current_adr
will fixup the binary to continue executing from the current position.
relocate_to_adr will copy the binary to a given address, fixup the
binary and continue executing from there.
For the PBL and the real image relocatable support can be enabled
independently. This is done to (hopefully) better cope with setups
where the PBL runs from SRAM or ROM and the real binary does not.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
config.h is not need and already inclued by Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this every devicetree is first converted to the barebox internal
format before it's converted back to dtb again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to boot a sequence of boot entries until one succeeds.
boot sources can be passed in $global.boot.default, which is now treated
as a list. Also a list of boot entries can be specified as arguments
to the boot script. The entries can be:
- a plain filename from /env/boot/
- a full path to an arbitrary file
- a directory containing boot entries
With this this command:
boot net nand-ubi /env/boot.d
would first use the /env/boot/net entry, if this fails the /env/boot/nand-ubi
entry and if this also fails the files from /env/boot.d/ (which could also
be links to boot scripts)
To make the above the default, global.boot.default would be specified as:
global.boot.default="net nand-ubi /env/boot.d"
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- heavily copied from register_persistant_environment which was
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use puts() because printf() isn't necessary,
to fix the following compiler warnings:
/barebox/common/menu.c: In function ‘menu_show’:
/barebox/common/menu.c:277:4: warning: format not a string literal and no format arguments [-Wformat-security]
/barebox/scripts/omap4_usbboot.c: In function ‘read_asic_id’:
/barebox/scripts/omap4_usbboot.c:101:3: warning: format not a string literal and no format arguments [-Wformat-security]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Vicente <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
form linux 3.8
so you can have part by num or name
not by GUID as this is a non human reading name
`---- ffe08000.sata
`---- 0x00000000-0x3fffffff: /dev/ata0
`---- 0x00100000-0x063fffff: /dev/ata0.0
`---- 0x00100000-0x063fffff: /dev/ata0.boot
`---- 0x06400000-0x3fefffff: /dev/ata0.1
`---- 0x06400000-0x3fefffff: /dev/ata0.linux
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can register partion with name as present in EFI GPT
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can support multiple format
use filetpye to detect the parser to use
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
GPT need to be check before MBR
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The different console implementations share a good amount of code,
share this in console_common.c.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the initrd start and end address to the DT, code comes from u-boot.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch add getopt to the command list if it enabled via
Kconfig. With this patch we get a 'command not found' error.
Otherwise getopt doing nothing.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This optionally enabled the MMU in the PBL or during early startup for
the non PBL case. The regular MMU init code will pickup the already enabled
MMU later. This might complicate debugging early code, so this has been
made optional.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so it more easy to add new entry and to maintain
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to have no console support
Use full for bootstrap as we can save 6.5 KiB (barebox.bin) and
3.8 KiB (zbarebox.bin lzo) on at91sam9263 as example vs console simple
As on bootstrap we have often very limited size.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can add easly the console_none support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
environment.h is for environment variables, not for the environment
storage (envfs), so move the prototypes to envfs.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently Kconfig dependencies are used to allow non-interactive builds.
This leads to problems in Kconfig getting the dependencies right.
This patch adds a barebox_main function pointer which is called at the
end of the startup process. This defaults to run_shell when a shell is
enabled.
With this the HAVE_NOSHELL Kconfig variable can be removed. Non interactive
builds can now be enabled for every board allowing to compile a binary
without further Kconfig dependencies. This also allows for more flexibility,
for example boards may decide to try non-interactive startup first and
call run_shell if that fails.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This has several improvements for the oftree command:
- loading a devicetree (-l) and actually probing (-p) it now is separated
- the command now can dump the internal devicetree or a dtb given on the
command line.
- The -f option now actually frees the internal devicetree
With this the usage pattern for this command is:
oftree -l /env/oftree
oftree -d -n /sound
oftree -d /env/oftree
oftree -f
oftree -p
oftree -l -p /env/oftree
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox_fdt should once become the pointer to the barebox internal
devicetree. Since barebox has its own internal devicetree format
this was never used. remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add barebox-data section in arm branch to get complete
barebox regions in sdram regions tree.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix display to stdout of allocated addresses.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix size address calculation.
Global variables from <asm/sections.h> which are defined
in linker script *.lds files for end addresses has already
a +1 calculation.
For example:
stext = 0x100 with a size about 0x50 will result a etext = 0x150.
In this case a correct size calculation is (etext - stext) = 0x50.
In function 'request_sdram_region' the end address will be
calculated with (start + size - 1) which result a correct
end address of 0x149 in this example.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix include for linkerscript variables like _etext.
Otherwise build with #define DEBUG will fail.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the bootm code uses of_fix_tree to apply the fixups
to the devicetree given on the command line. This function assumes
that there is enough space for the fixups available. Also on ARM
we have to make sure the tree does not cross 1Mib boundaries.
This patch moves the space allocation and alignment ensurance
to of_get_fixed_tree and uses it in bootm. This is the first
step for making of_get_fixed_tree the single point of devicetree
handling in barebox.
of_get_fixed_tree now takes an argument of the input fdt. If it is
given, this one is used, otherwise an internal oftree is used which
will be created in subsequent patches.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_add_child is a very unsafe function. If called multiple times
it allows setting the same device to different parents thus corrupting
the siblings list. This happens regularly since:
| commit c2e568d19c
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Date: Sat Nov 3 16:11:05 2012 +0100
|
| bus: add bus device
|
| automatically add it as parent of any bus device if none already specified
|
| we have now a nice output per bus
If for example a FATfs is mounted this nice output per bus often ends with:
> `---- fat0
> `---- 0
> `---- 0x86f0000087020031-0x86f000410df27124: /dev/<NULL>
> `---- sram00
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> unable to handle NULL pointer dereference at address 0x0000000c
> pc : [<87f08a20>] lr : [<87f08a04>]
> sp : 86eff8c0 ip : 87f3fbde fp : ffffffff
> r10: ffffffff r9 : 00000000 r8 : 00000003
> r7 : 86f075b8 r6 : 00000002 r5 : ffffffec r4 : 86f07544
> r3 : 00000000 r2 : 43f900b4 r1 : 00000020 r0 : 00000005
> Flags: Nzcv IRQs off FIQs off Mode SVC_32
> [<87f08a20>] (do_devinfo_subtree+0x90/0x130) from [<87f08a90>] (do_devinfo_subtree+0x100/0x130)
>
> [<87f3e070>] (unwind_backtrace+0x0/0x90) from [<87f28514>] (panic+0x28/0x3c)
> [<87f28514>] (panic+0x28/0x3c) from [<87f3e4b8>] (do_exception+0x10/0x14)
> [<87f3e4b8>] (do_exception+0x10/0x14) from [<87f3e544>] (do_data_abort+0x2c/0x38)
> [<87f3e544>] (do_data_abort+0x2c/0x38) from [<87f3e268>] (data_abort+0x48/0x60)
This patch fixes this by adding a device to its parents children list in
register_device so that dev_add_child is no longer needed. This function
is removed from the tree. Now callers of register_device have to clearly
set the parent *before* registering a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Jan Lübbe <jlu@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
due to missing/misplaced boundary check, deleting characters could
underflow the password buffer.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Pass the buffer size to the file detection code. This makes sure we do not
read past the buffer. This is especially useful for ext filesystem detection
as the magic is at byte offset 1080. Also introduce a FILE_TYPE_SAFE_BUFSIZE
define which is set to the minimum bufsize the detection code needs to detect
all known filetypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It was not possible to register another handler when already
a default handler is registered. Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implements two new options for the loadenv command:
-s: removes (scrubs) old directory contents to be able to
create a fresh environment from for example /dev/defaultenv
-n: no overwrite. Do not overwrite existing files. This allows
to keep parts of the old environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The option of reading the file at once was discarded because
the option of increasing the buffer size provided almost the
same benefit.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
hush now prints the error value if a command returns a value < 0,
so do not return -1 (EPERM) when we encounter an unknown command.
Instead, return 1 so that hush is quiet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the uImage support may generate a temporary file which ought to be deleted
after usage. Due to the wrong filename this never happened. Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The filetype strings are not really suitable for shell scripts, so
add a shortname array of filetypes usable for shell scripts.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches environment variables to use linux list. This is easier
to read. An additional plus is that the environment variables no longer
need an initcall, so malloc is the only requirement for them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to have the same feature as earlyprintk in the kernel
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
is_timeout call poller_call if the timeout is >= 100us
but on 1-wire bus we need to wait 500us and not more than 930us
for the bus reset. So if the poller_call is caller we can not guarantee it.
So for this introduce is_non_interruptible_timeout than we only wait.
Use it for ndelay too.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently in-system update means to write an arbitrary file to
an arbitrary device. There is no sanity check if the flashed image
is of the right type or will fit onto the device. Furthermore some
SoCs need a special preparation step for their images before
flashing them.
This adds a barebox in-system update infrastructure. Boards can
register update handlers which know how to make the board bootable.
The available handlers can be listed to be able to select one,
different force levels give the user the chance to know it better.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a build with a compressed default environment is done and then
environment compression is disabled, barebox_default_env.h is not
regenerated because its dependency (now barebox_default_env) is still
up to date. This results in a corrupt default environment.
This patch fixes this by adding a cmd_env_h and changing barebox_default_env.h
to FORCE. As a side effect barebox_default_env.h is no longer generated in
include/generated/ but in common/ as we have to add barebox_default_env.h to
$(targets) (extra-y).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When reading values from a DOS disk, we need to force a little endian
reading.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If we know the model name from the devicetree print this
in the banner instead of the hardcoded board name.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There was a time when we used to panic when initcalls failed. Then
it was changed to totally ignore the return value. Instead, print
an error message now so that the user can get a clue when something
bad happened. So initcalls are now recommended to actually return
negative error codes when something fails.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use a choice for the CONSOLE_ACTIVATE_* variables, which is the natural
way of specifying mutually exclusive variabled in Kconfig. Also update
the help texts a bit.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When CONFIG_CONSOLE_ACTIVATE_ALL is set, the banner will never be printed.
Also, the console buffer is emptied when the first console is registered,
even when it's not enabled.
This patch cleans it up in a way that:
- the console buffer is emptied once the first console is activated, not
when it's registered.
- Make sure that the banner is printed first, so that we can output things
to the buffer before the banner is printed without ending up in having
the banner in the middle of the other boot messages.
- Use IS_ENABLED rather than ifdefs
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a memory bank is already registered, return an error code
instead of throwing a bug. This can happen if a board has registered
a memory bank and the same bank is then probed from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This gets us rid of an initcall and also has the advantage that
request_iomem_region can be called at any time now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to do not have 2 set of var for defaultenv and the new
defaultenv-2.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The dependencies for generating the environment do not work properly:
- If files are removed from the defaultenv, a subsequent make will not
update the default environment.
- If CONFIG_DEFAULT_ENVIRONMENT_PATH changes, the default environment
also will not be regenerated.
This patch fixes this by introducing a cmd_env which has the content of
$(ENV_FILES) in the command so that the if_changed mechanism recognizes
a change when $(ENV_FILE) changes. This also results in a nice " ENV "
string in the build process.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The CLEAN_FILES in common/Makefile are unused. All generated files
are removed from the toplevel Makefile.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is unused now and not needed. We have a board_init_lowlevel. If a
board needs some architecture setup it can always call it from its
board_init_lowlevel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We may have some disk with MBR as a first sector. In this case, the
current FAT check returns an error. However, the FAT sector exist and
the MBR can tell us where it is.
This patch add to file_name_detect_type function the ability to find
the FAT boot sector on the first sector of the first partition in case
it is not on sector 0.
It also introduce is_fat_or_mbr to check if a buffer is a FAT boot
or MBR sector
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds code to probe devices from a devicetree. Most helper
functions are directly imported from Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch sync the image type list with the kernel in order to add
openrisc support.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add functions to read the barebox_arm_head, check barebox magicword
and read out the barebox image size.
Create a inital partion of 1Mb to access the barebox image on nand.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Introduce a struct envfs_inode_end with more data.
Today this will just containt the file mode to be able to add the symlink
support.
But this is compatible with the previous envfs version as they will do not
care about the extra as the previous version is just reading the filename and
then consume the extra data without using them.
Increase the envfs version to 1.0
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
they are store in the super block at byte 16th and 17th.
set the verison at 0.1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
execute_binfmt may return negative return values which hush interprets
as 'exit'. Catch this and print an error message instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
'exit' used to do its job by returning value < 0. This is a sign
for hush that 'exit' is executed. This has problems:
- Often commands accidently return a negative value. This causes
the shell to exit.
- execute_binfmt returns a negative value when it does not find
a binary to execute. This again causes the shell to exit.
Returning a negative error value seems to be the right thing
to do, but catching this in the shell would mean that the exit
command does not work anymore.
- if called without arguments exit is supposed to return the code
of the last command. As a command exit has no access to this code.
This patch changes exit to be a builtin and also fixes the last return
code problem. While at it, update the help text.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allow to use the number key to jump to entry.
if already on a entry % number_key jump to the next +10 one if exit
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows for creating a lzo compressed binary unsing the pbl.
Only copy the piggydata if needed.
Add CONFIG_PBL_FORCE_PIGGYDATA_COPY option
In some case we need to copy the PIGGYDATA as the link address
as example we run from SRAM and shutdown the SDRAM/DDR for
reconfiguration but most of the time we just need to copy the
executable code.
based on Sascha Hauer
Add compressed image support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This allows for creating a pre-bootloader binary for
- nand boot
- mmc boot
- compressed image
The pbl will be incharge of the lowlevel init if needed.
The barebox will skip it.
Import string functions from linux 3.4 (arch/arm/boot/compressed/string.c) and
implement a dummy panic.
For now on introduce dummy zbarebox* targets and c code that will contain later
the decompressor. This only implemeted on ARM.
This patch is based on Sascha Hauer <s.hauer@pengutronix.de>
Add compressed image support patch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
enable is by default for simple and hush
we do not need to NO_SHELL
this allow to save 1KiB
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Both the uimage command and the bootm command need uImage support, so
add a Kconfig symbol for it to be able to select it properly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Many architectures support a way to detect why the bootloader is running.
This patch adds a global variable to be able to use the cause in some kind of
shell code to do special things on demand. For example to do an emergency boot,
when the last boot fails and the watchdog reactivate the hanging system.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add usage information
- add option parsing:
-v verbose
-v -v more verbose
-l list b´possible boot sources
-d dryrun
The dryrun option sets the global variables necessary for booting
but does not actually boot the system. This way it is possible to
make additional adjustments to the boot variables and then invoke
bootm manually.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make the nonopt arguments to a script available starting from $1
after running getopt. This allows for scripts which use option
parsing but also have nonopts.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the size instead of the resource end in struct resource was
a mistake. 'size' ranges from 0 to UINT[32|64]_MAX + 1 which obviously
leads to problems. 'end' on the other hand will never exceed
UINT[32|64]_MAX. Also this way we can express a iomem region covering
the whole address space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of calling print_menu_entry multiple times in each case, store
the repaint state in a variable and call it once at the end to save a
few bytes of binary space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have the read_key function which reads a key and parses escape sequences.
Use it in the menu instead of reimplementing this manually.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a device parameter has dots in its name, we have to use strchr instead
of strrchr, because the devicename ends at the first dot, not at the last one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change function name to command_var_complete in all calls and its declaration.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It does not necessarily means a bug when block_get fails here,
this can also be a failure on the underlying device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
parse_stream_outer used to convert a exit value to a return code,
but parse_stream_outer maybe inside a recursion. This means that
the exit status is lost in this case. Test case:
if [ 0 = 0 ]; then
false
exit $?
fi
echo "shouldn't be here"
Without this patch "shouldn't be here" will be printed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
print_menu_entry() in common/menu.c depeneds on process_escape_sequence().
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can start a new interactive shell now using the 'sh' command on
the command line. This shell exits on ctrl-c though. Add a loop
around it to continue instead of exiting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a new environment template which aims to be more flexible
and configurable. Instead of having mainly two scripts (a config script
and a boot script) this template uses initscripts which control the
startup behaviour and configuration. Also we have boot scripts in
/env/boot which configure a single boot configuration. Additional
boot entries can be added by board specific entries or during runtime
by copying and editing a template entry.
Some more helpers handle for example network interfaces which can now
be brought up with 'ifup'. We use the automount feature to configure
mountpoints together with the commands to bring up the devices behind
these mountpoints.
Optionally menu support is available which hides many details behind
a nice looking interface.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We currently use the environment variable 'bootargs' to get the
Linux bootargs. This patch allows for a more flexible bootargs
generation using global variables. With it the Linux bootargs
are concatenated from multiple variables. This allows to replace
parts of the bootargs string without having to reconstruct it
completely.
With this bootargs can be constructed like:
global linux.bootargs.base="console=ttyS0,115200"
global linux.bootargs.ip="ip=dhcp"
global linux.mtdparts="physmap-flash.0:512K(nor0.barebox),-(root)"
This will then automatically be combined into a kernel bootargs
string during boot.
If the 'linux.bootargs.' variables are all empty the old standard
'bootargs' way will be used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implements global shell variable support. This is done by registering
a new device named 'global', so global variables are just plain device
parameters.
Global variables are useful for storing the global state in the environment.
Currently we do this by sourcing scripts instead of executing them which is
quite limiting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Normally errno contains a positive error value. A certain unnamed developer
mixed this up while implementing U-Boot-v2. Also, normally errno is never
set to zero by any library function.
This patch fixes this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
file_to_sdram is used to load an initrd. The resource size is
then used to pass the initrd size to Linux. This means that
the resource size must exactly match the initrd size. Currently
this is not the case since we request the sdram region in chunks
of 8 Kbytes. Fix this by adjusting the resource size when the file
is loaded.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On a systax error we have to bail out of the shell instead of
setting inp->p to NULL and crash barebox with a NULL pointer
deref. This only happened in scripts.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes the problem I had (i.e. a boot loop caused by a stray fi in
/env/bin/init).
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The following patch serie improve the complete support
by adding a complete framework to aalow commands complete support.
The add also car complete support for eval and setting and executable
file support
This also include an update of the stringlist API to support asprintf
API
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=rYfw
-----END PGP SIGNATURE-----
Merge tag 'complete_update_support' of git://git.jcrosoft.org/barebox into next
improve complete support
The following patch serie improve the complete support
by adding a complete framework to allow commands complete support.
The add also car complete support for eval and setting and executable
file support
This also include an update of the stringlist API to support asprintf
API
This allows to call 'sh' in scripts without arguments in which
case an interactive shell will be started.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
hush has a long standing and anoying glob bug. hush expands wildcards
during parsing of the script or command stream. When the command stream
begins to execute the wildcards are already expanded which leads to:
mkdir /tmp
cd /tmp
mkdir foo; ls *
ls: *: No such file or directory
To fix this expand wildcards right before executing the command. Since
'for' loops are not executed in commands, we have to keep the old behaviour
in here so that 'for i in *' still works.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By doing so glob will not return GLOB_NOMATCH anymore but instead
just does what fake_glob would do.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
hush used to escape '*' '[' '?' during parsing because the quotes
got removed in the first parsing loop.
globhack is used to remove these escapes again for glob. Since we now
keep the quotes until the end of parsing and we no longer escape glob
wildcards, we do no longer have to remove any quotes. With this globhack
can be much simpler.
While at it, change the prototype to match the one from glob() and rename
the function to fake_glob, because that's what it is: it just copies the
input string into the output struct without actually globbing.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
hush removes the quotes from strings too early. This leads to some bugs.
When hush executes
echo "hello sascha"
it correctly results in:
argv[0] = "echo"
argv[1] = "hello sascha"
However, the following behaves incorrect:
a="hello sascha"
echo "$a"
results in:
argv[0] = "echo"
argv[1] = "hello"
argv[2] = "sascha"
This is because hush removes the quotes and inserts variable values in a
single loop, so
echo "$a"
becomes:
echo hello sascha
after the loop.
Instead, keep the quotes until all variables are inserted and remove them
at the end.
This also fixes that echo \" resulted in \" instead of ".
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
General coding style cleanup
- add some blank lines
- add whitespaces on on both sides of operators
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Alexander Aring
Sascha Hauer
Hubert Feurstein
Marc Kleine-Budde
Jean-Christophe PLAGNIOL-VILLARD
Fabio Porcedda
Eric Bénard
Vicente Bergas
Alexander Shiyan
Enrico Scholz
Franck Jullien
Jan Weitzel
Jan Luebbe
Juergen Beisert
Antony Pavlov
Steffen Trumtrar
Krzysztof Halasa
Alan Ott