add QNAP TS-219 support
svn path=/dists/trunk/linux-2.6/; revision=13198
This commit is contained in:
parent
481a3c2aae
commit
fe23e10f7c
|
@ -80,6 +80,8 @@ linux-2.6 (2.6.29~rc8-1~experimental.1) UNRELEASED; urgency=low
|
|||
- Marvell SheevaPlug support
|
||||
- SheevaPlug USB Power Enable setup
|
||||
- SheevaPlug LED support
|
||||
- Hook up I2C on Kirkwood
|
||||
- Add support for QNAP TS-119/TS-219 Turbo NAS
|
||||
* [armel/kirkwood] Add an image for Marvell's Kirkwood platform.
|
||||
|
||||
[ Ben Hutchings ]
|
||||
|
|
|
@ -0,0 +1,26 @@
|
|||
To: nico@cam.org
|
||||
Cc: linux-arm-kernel@lists.arm.linux.org.uk
|
||||
Subject: [PATCH] Kirkwood: More consistency regarding MPP naming
|
||||
|
||||
With the exception of UART0, all MPP names are uppercase.
|
||||
|
||||
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
|
||||
|
||||
--- a/arch/arm/mach-kirkwood/mpp.h
|
||||
+++ b/arch/arm/mach-kirkwood/mpp.h
|
||||
@@ -90,13 +90,13 @@
|
||||
|
||||
#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1 )
|
||||
#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1 )
|
||||
-#define MPP10_UArt0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1 )
|
||||
+#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1 )
|
||||
#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1 )
|
||||
#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1 )
|
||||
|
||||
#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1 )
|
||||
#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1 )
|
||||
-#define MPP11_UArt0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1 )
|
||||
+#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1 )
|
||||
#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1 )
|
||||
#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1 )
|
||||
#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1 )
|
|
@ -0,0 +1,81 @@
|
|||
To: nico@cam.org
|
||||
Cc: linux-arm-kernel@lists.arm.linux.org.uk
|
||||
Subject: [PATCH] Kirkwood: Don't initialize Marvell RTC for all boards
|
||||
|
||||
Even though the Marvell Kirkwood has a built-in RTC, some Kirkwood-based
|
||||
boards (e.g. QNAP TS-219) use a separate RTC chip. Don't initialize the
|
||||
Marvell RTC in common code for all boards, otherwise you end up with
|
||||
two RTC devices on those with their own RTC chip and the default device
|
||||
is the Marvell RTC which may not work.
|
||||
|
||||
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
|
||||
|
||||
--- a/arch/arm/mach-kirkwood/common.c 2009-03-22 20:39:53.000000000 +0000
|
||||
+++ b/arch/arm/mach-kirkwood/common.c 2009-03-22 20:40:03.000000000 +0000
|
||||
@@ -256,7 +256,7 @@
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
-static void __init kirkwood_rtc_init(void)
|
||||
+void __init kirkwood_rtc_init(void)
|
||||
{
|
||||
platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
|
||||
}
|
||||
@@ -795,7 +795,6 @@
|
||||
#endif
|
||||
|
||||
/* internal devices that every board has */
|
||||
- kirkwood_rtc_init();
|
||||
kirkwood_xor0_init();
|
||||
kirkwood_xor1_init();
|
||||
}
|
||||
--- a/arch/arm/mach-kirkwood/common.h
|
||||
+++ b/arch/arm/mach-kirkwood/common.h
|
||||
@@ -34,6 +34,7 @@
|
||||
void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
|
||||
void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
|
||||
void kirkwood_pcie_init(void);
|
||||
+void kirkwood_rtc_init(void);
|
||||
void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
|
||||
void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
|
||||
void kirkwood_spi_init(void);
|
||||
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c 2009-03-22 20:37:57.000000000 +0000
|
||||
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c 2009-03-22 20:38:08.000000000 +0000
|
||||
@@ -124,6 +124,7 @@
|
||||
}
|
||||
kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
|
||||
|
||||
+ kirkwood_rtc_init();
|
||||
kirkwood_sata_init(&rd88f6281_sata_data);
|
||||
kirkwood_sdio_init(&rd88f6281_mvsdio_data);
|
||||
kirkwood_uart0_init();
|
||||
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c 2009-03-22 20:37:54.000000000 +0000
|
||||
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c 2009-03-22 20:38:08.000000000 +0000
|
||||
@@ -61,6 +61,7 @@
|
||||
|
||||
kirkwood_ehci_init();
|
||||
kirkwood_ge00_init(&rd88f6192_ge00_data);
|
||||
+ kirkwood_rtc_init();
|
||||
kirkwood_sata_init(&rd88f6192_sata_data);
|
||||
spi_register_board_info(rd88F6192_spi_slave_info,
|
||||
ARRAY_SIZE(rd88F6192_spi_slave_info));
|
||||
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c 2009-03-22 20:37:50.000000000 +0000
|
||||
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c 2009-03-22 20:38:08.000000000 +0000
|
||||
@@ -55,6 +55,7 @@
|
||||
|
||||
kirkwood_ehci_init();
|
||||
kirkwood_ge00_init(&db88f6281_ge00_data);
|
||||
+ kirkwood_rtc_init();
|
||||
kirkwood_sata_init(&db88f6281_sata_data);
|
||||
kirkwood_uart0_init();
|
||||
kirkwood_sdio_init(&db88f6281_mvsdio_data);
|
||||
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
|
||||
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
|
||||
@@ -118,6 +118,7 @@ static void __init sheevaplug_init(void)
|
||||
kirkwood_ehci_init();
|
||||
|
||||
kirkwood_ge00_init(&sheevaplug_ge00_data);
|
||||
+ kirkwood_rtc_init();
|
||||
kirkwood_sdio_init(&sheevaplug_mvsdio_data);
|
||||
|
||||
platform_device_register(&sheevaplug_nand_flash);
|
|
@ -0,0 +1,85 @@
|
|||
To: nico@cam.org
|
||||
Cc: linux-arm-kernel@lists.arm.linux.org.uk
|
||||
Subject: [PATCH] Kirkwood: Hook up I2C
|
||||
|
||||
Hook up I2C on Marvell Kirkwood. Tested on a QNAP TS-219 which has RTC
|
||||
connected through I2C.
|
||||
|
||||
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
|
||||
|
||||
--- a/arch/arm/mach-kirkwood/common.c
|
||||
+++ b/arch/arm/mach-kirkwood/common.c
|
||||
@@ -14,6 +14,7 @@
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/mbus.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
+#include <linux/mv643xx_i2c.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/spi/orion_spi.h>
|
||||
#include <net/dsa.h>
|
||||
@@ -371,6 +372,45 @@ void __init kirkwood_spi_init()
|
||||
|
||||
|
||||
/*****************************************************************************
|
||||
+ * I2C
|
||||
+ ****************************************************************************/
|
||||
+static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
|
||||
+ .freq_m = 8, /* assumes 166 MHz TCLK */
|
||||
+ .freq_n = 3,
|
||||
+ .timeout = 1000, /* Default timeout of 1 second */
|
||||
+};
|
||||
+
|
||||
+static struct resource kirkwood_i2c_resources[] = {
|
||||
+ {
|
||||
+ .name = "i2c base",
|
||||
+ .start = I2C_PHYS_BASE,
|
||||
+ .end = I2C_PHYS_BASE + 0x1f,
|
||||
+ .flags = IORESOURCE_MEM,
|
||||
+ }, {
|
||||
+ .name = "i2c irq",
|
||||
+ .start = IRQ_KIRKWOOD_TWSI,
|
||||
+ .end = IRQ_KIRKWOOD_TWSI,
|
||||
+ .flags = IORESOURCE_IRQ,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct platform_device kirkwood_i2c = {
|
||||
+ .name = MV64XXX_I2C_CTLR_NAME,
|
||||
+ .id = 0,
|
||||
+ .num_resources = ARRAY_SIZE(kirkwood_i2c_resources),
|
||||
+ .resource = kirkwood_i2c_resources,
|
||||
+ .dev = {
|
||||
+ .platform_data = &kirkwood_i2c_pdata,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+void __init kirkwood_i2c_init(void)
|
||||
+{
|
||||
+ platform_device_register(&kirkwood_i2c);
|
||||
+}
|
||||
+
|
||||
+
|
||||
+/*****************************************************************************
|
||||
* UART0
|
||||
****************************************************************************/
|
||||
static struct plat_serial8250_port kirkwood_uart0_data[] = {
|
||||
--- a/arch/arm/mach-kirkwood/common.h
|
||||
+++ b/arch/arm/mach-kirkwood/common.h
|
||||
@@ -37,6 +37,7 @@ void kirkwood_pcie_init(void);
|
||||
void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
|
||||
void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
|
||||
void kirkwood_spi_init(void);
|
||||
+void kirkwood_i2c_init(void);
|
||||
void kirkwood_uart0_init(void);
|
||||
void kirkwood_uart1_init(void);
|
||||
|
||||
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
|
||||
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
|
||||
@@ -93,6 +93,7 @@
|
||||
#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
|
||||
#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
|
||||
#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
|
||||
+#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
|
||||
#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
|
||||
#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
|
||||
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
|
|
@ -0,0 +1,279 @@
|
|||
To: nico@cam.org
|
||||
Cc: linux-arm-kernel@lists.arm.linux.org.uk
|
||||
Subject: [PATCH] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NAS
|
||||
|
||||
Add support for the QNAP TS-119 and TS-219 Turbo NAS devices.
|
||||
|
||||
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
|
||||
|
||||
|
||||
--- a/arch/arm/mach-kirkwood/Kconfig
|
||||
+++ b/arch/arm/mach-kirkwood/Kconfig
|
||||
@@ -26,6 +26,12 @@ config MACH_SHEEVAPLUG
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Marvell SheevaPlug Reference Board.
|
||||
|
||||
+config MACH_TS219
|
||||
+ bool "QNAP TS-119 and TS-219 Turbo NAS"
|
||||
+ help
|
||||
+ Say 'Y' here if you want your kernel to support the
|
||||
+ QNAP TS-119 and TS-219 Turbo NAS devices.
|
||||
+
|
||||
endmenu
|
||||
|
||||
endif
|
||||
--- a/arch/arm/mach-kirkwood/Makefile
|
||||
+++ b/arch/arm/mach-kirkwood/Makefile
|
||||
@@ -4,3 +4,4 @@ obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
|
||||
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
|
||||
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
|
||||
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
|
||||
+obj-$(CONFIG_MACH_TS219) += ts219-setup.o
|
||||
--- a/arch/arm/mach-kirkwood/common.h
|
||||
+++ b/arch/arm/mach-kirkwood/common.h
|
||||
@@ -42,6 +42,7 @@
|
||||
void kirkwood_uart0_init(void);
|
||||
void kirkwood_uart1_init(void);
|
||||
|
||||
+extern int kirkwood_tclk;
|
||||
extern struct sys_timer kirkwood_timer;
|
||||
|
||||
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
|
||||
@@ -0,0 +1,220 @@
|
||||
+/*
|
||||
+ *
|
||||
+ * QNAP TS-119/TS-219 Turbo NAS Board Setup
|
||||
+ *
|
||||
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
|
||||
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or
|
||||
+ * modify it under the terms of the GNU General Public License
|
||||
+ * as published by the Free Software Foundation; either version
|
||||
+ * 2 of the License, or (at your option) any later version.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/mtd/physmap.h>
|
||||
+#include <linux/spi/flash.h>
|
||||
+#include <linux/spi/spi.h>
|
||||
+#include <linux/spi/orion_spi.h>
|
||||
+#include <linux/i2c.h>
|
||||
+#include <linux/mv643xx_eth.h>
|
||||
+#include <linux/ata_platform.h>
|
||||
+#include <linux/gpio_keys.h>
|
||||
+#include <linux/input.h>
|
||||
+#include <linux/timex.h>
|
||||
+#include <linux/serial_reg.h>
|
||||
+#include <linux/pci.h>
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/mach/arch.h>
|
||||
+#include <mach/kirkwood.h>
|
||||
+#include "common.h"
|
||||
+#include "mpp.h"
|
||||
+
|
||||
+/****************************************************************************
|
||||
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
|
||||
+ * partitions on the device because we want to keep compatability with
|
||||
+ * the QNAP firmware.
|
||||
+ * Layout as used by QNAP:
|
||||
+ * 0x00000000-0x00080000 : "U-Boot"
|
||||
+ * 0x00200000-0x00400000 : "Kernel"
|
||||
+ * 0x00400000-0x00d00000 : "RootFS"
|
||||
+ * 0x00d00000-0x01000000 : "RootFS2"
|
||||
+ * 0x00080000-0x000c0000 : "U-Boot Config"
|
||||
+ * 0x000c0000-0x00200000 : "NAS Config"
|
||||
+ *
|
||||
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
|
||||
+ * used by the QNAP TS-109/TS-209.
|
||||
+ *
|
||||
+ ***************************************************************************/
|
||||
+
|
||||
+static struct mtd_partition qnap_ts219_partitions[] = {
|
||||
+ {
|
||||
+ .name = "U-Boot",
|
||||
+ .size = 0x00080000,
|
||||
+ .offset = 0,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ }, {
|
||||
+ .name = "Kernel",
|
||||
+ .size = 0x00200000,
|
||||
+ .offset = 0x00200000,
|
||||
+ }, {
|
||||
+ .name = "RootFS1",
|
||||
+ .size = 0x00900000,
|
||||
+ .offset = 0x00400000,
|
||||
+ }, {
|
||||
+ .name = "RootFS2",
|
||||
+ .size = 0x00300000,
|
||||
+ .offset = 0x00d00000,
|
||||
+ }, {
|
||||
+ .name = "U-Boot Config",
|
||||
+ .size = 0x00040000,
|
||||
+ .offset = 0x00080000,
|
||||
+ }, {
|
||||
+ .name = "NAS Config",
|
||||
+ .size = 0x00140000,
|
||||
+ .offset = 0x000c0000,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static const struct flash_platform_data qnap_ts219_flash = {
|
||||
+ .type = "m25p128",
|
||||
+ .name = "spi_flash",
|
||||
+ .parts = qnap_ts219_partitions,
|
||||
+ .nr_parts = ARRAY_SIZE(qnap_ts219_partitions),
|
||||
+};
|
||||
+
|
||||
+static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
|
||||
+ {
|
||||
+ .modalias = "m25p80",
|
||||
+ .platform_data = &qnap_ts219_flash,
|
||||
+ .irq = -1,
|
||||
+ .max_speed_hz = 20000000,
|
||||
+ .bus_num = 0,
|
||||
+ .chip_select = 0,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
|
||||
+ I2C_BOARD_INFO("s35390a", 0x30),
|
||||
+};
|
||||
+
|
||||
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
|
||||
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
||||
+};
|
||||
+
|
||||
+static struct mv_sata_platform_data qnap_ts219_sata_data = {
|
||||
+ .n_ports = 2,
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_button qnap_ts219_buttons[] = {
|
||||
+ {
|
||||
+ .code = KEY_COPY,
|
||||
+ .gpio = 15,
|
||||
+ .desc = "USB Copy",
|
||||
+ .active_low = 1,
|
||||
+ },
|
||||
+ {
|
||||
+ .code = KEY_RESTART,
|
||||
+ .gpio = 16,
|
||||
+ .desc = "Reset",
|
||||
+ .active_low = 1,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_platform_data qnap_ts219_button_data = {
|
||||
+ .buttons = qnap_ts219_buttons,
|
||||
+ .nbuttons = ARRAY_SIZE(qnap_ts219_buttons),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device qnap_ts219_button_device = {
|
||||
+ .name = "gpio-keys",
|
||||
+ .id = -1,
|
||||
+ .num_resources = 0,
|
||||
+ .dev = {
|
||||
+ .platform_data = &qnap_ts219_button_data,
|
||||
+ }
|
||||
+};
|
||||
+
|
||||
+static unsigned int qnap_ts219_mpp_config[] __initdata = {
|
||||
+ MPP0_SPI_SCn,
|
||||
+ MPP1_SPI_MOSI,
|
||||
+ MPP2_SPI_SCK,
|
||||
+ MPP3_SPI_MISO,
|
||||
+ MPP8_TW_SDA,
|
||||
+ MPP9_TW_SCK,
|
||||
+ MPP10_UART0_TXD,
|
||||
+ MPP11_UART0_RXD,
|
||||
+ MPP13_UART1_TXD, /* PIC controller */
|
||||
+ MPP14_UART1_RXD, /* PIC controller */
|
||||
+ MPP15_GPIO, /* USB Copy button */
|
||||
+ MPP16_GPIO, /* Reset button */
|
||||
+ MPP20_SATA1_ACTn,
|
||||
+ MPP21_SATA0_ACTn,
|
||||
+ MPP22_SATA1_PRESENTn,
|
||||
+ MPP23_SATA0_PRESENTn,
|
||||
+ 0
|
||||
+};
|
||||
+
|
||||
+
|
||||
+/*****************************************************************************
|
||||
+ * QNAP TS-x19 specific power off method via UART1-attached PIC
|
||||
+ ****************************************************************************/
|
||||
+
|
||||
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
|
||||
+
|
||||
+void qnap_ts219_power_off(void)
|
||||
+{
|
||||
+ /* 19200 baud divisor */
|
||||
+ const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
|
||||
+
|
||||
+ pr_info("%s: triggering power-off...\n", __func__);
|
||||
+
|
||||
+ /* hijack UART1 and reset into sane state (19200,8n1) */
|
||||
+ writel(0x83, UART1_REG(LCR));
|
||||
+ writel(divisor & 0xff, UART1_REG(DLL));
|
||||
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
|
||||
+ writel(0x03, UART1_REG(LCR));
|
||||
+ writel(0x00, UART1_REG(IER));
|
||||
+ writel(0x00, UART1_REG(FCR));
|
||||
+ writel(0x00, UART1_REG(MCR));
|
||||
+
|
||||
+ /* send the power-off command 'A' to PIC */
|
||||
+ writel('A', UART1_REG(TX));
|
||||
+}
|
||||
+
|
||||
+static void __init qnap_ts219_init(void)
|
||||
+{
|
||||
+ /*
|
||||
+ * Basic setup. Needs to be called early.
|
||||
+ */
|
||||
+ kirkwood_init();
|
||||
+ kirkwood_mpp_conf(qnap_ts219_mpp_config);
|
||||
+
|
||||
+ kirkwood_uart0_init();
|
||||
+ kirkwood_uart1_init(); /* A PIC controller is connected here. */
|
||||
+ spi_register_board_info(qnap_ts219_spi_slave_info,
|
||||
+ ARRAY_SIZE(qnap_ts219_spi_slave_info));
|
||||
+ kirkwood_spi_init();
|
||||
+ kirkwood_i2c_init();
|
||||
+ i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
|
||||
+ kirkwood_ge00_init(&qnap_ts219_ge00_data);
|
||||
+ kirkwood_sata_init(&qnap_ts219_sata_data);
|
||||
+ kirkwood_ehci_init();
|
||||
+ platform_device_register(&qnap_ts219_button_device);
|
||||
+
|
||||
+ pm_power_off = qnap_ts219_power_off;
|
||||
+
|
||||
+}
|
||||
+
|
||||
+MACHINE_START(TS219, "QNAP TS-119/TS-219")
|
||||
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
|
||||
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
||||
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
||||
+ .boot_params = 0x00000100,
|
||||
+ .init_machine = qnap_ts219_init,
|
||||
+ .map_io = kirkwood_map_io,
|
||||
+ .init_irq = kirkwood_init_irq,
|
||||
+ .timer = &kirkwood_timer,
|
||||
+MACHINE_END
|
||||
--- a/arch/arm/tools/mach-types 2009-03-22 20:42:58.000000000 +0000
|
||||
+++ b/arch/arm/tools/mach-types 2009-03-22 20:43:18.000000000 +0000
|
||||
@@ -1995,3 +1995,4 @@
|
||||
linkstation_ls_hgl MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL 2005
|
||||
htcvenus MACH_HTCVENUS HTCVENUS 2006
|
||||
sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097
|
||||
+ts219 MACH_TS219 TS219 2139
|
||||
|
||||
#--- a/arch/arm/tools/mach-types
|
||||
#+++ b/arch/arm/tools/mach-types
|
||||
#@@ -2124,3 +2124,4 @@ mx27wallace MACH_MX27WALLACE MX27WALLACE 2133
|
||||
fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134
|
||||
rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135
|
||||
smallogger MACH_SMALLOGGER SMALLOGGER 2136
|
||||
+ts219 MACH_TS219 TS219 2139
|
|
@ -35,3 +35,7 @@
|
|||
+ features/arm/kw-sheevaplug.patch
|
||||
+ features/arm/kw-sheevaplug-usb-power.patch
|
||||
+ features/arm/kw-sheevaplug-led.patch
|
||||
+ features/arm/kw-hook-up-i2c.patch
|
||||
+ features/arm/kw-dont-init-rtc.patch
|
||||
+ features/arm/kw-consistency-mpp.patch
|
||||
+ features/arm/ts219.patch
|
||||
|
|
Loading…
Reference in New Issue