Alexander Couzens
1e3af1cbdf
ar71xx/sysmocom: use correct gpio name for ar933x devices
...
Wrong gpio names were used in gpio_function_disable. But likely they had
the same value.
2015-06-09 16:09:01 +02:00
Alexander Couzens
2375915d9f
ar71xx/sysmocom: fix eeprom type - 24c02 is assembled
2015-06-09 16:06:27 +02:00
Alexander Couzens
5f90cba27a
ar71xx: add size depend partition generation
...
Partitions are generated depending on the size of the flash chip.
The layout on which the partition based is hardcoded into the module.
Using this new partition layout it makes possible to have 8mb and 16mb within
the same board definition.
2015-05-20 12:58:53 +02:00
Alexander Couzens
acd543359d
ar71xx/sysmocom: set art table even for 8mb devices to the last sector of 16mb
...
This is possible because the memory will be wrapped around when using
the mapped spi memory space.
2015-05-18 22:32:28 +02:00
Alexander Couzens
fb426b964f
ar71xx/sysmocom: add support for jb02v3
2015-05-12 17:46:02 +02:00
Alexander Couzens
607bcc2386
ar71xx/sysmocom: register i2c bus + devices
2015-05-07 20:46:33 +02:00
Alexander Couzens
1755472d2e
ar71xx/sysmocom: switch mac address of eth0 + eth1
...
The lowest mac address should assigned to the switch
2015-04-06 20:09:06 +02:00
Alexander Couzens
7cfcabc7ae
ar71xx/sysmocom/sob-jb02: fix led color - both leds are red
2015-04-04 17:08:09 +02:00
Alexander Couzens
7ddeeba72a
ar71xx: ap1 + jb02: fix mac address
2015-03-17 18:32:40 +01:00
Alexander Couzens
64caabe995
ar71xx/sysmocom: move local admin port out of the switch
2015-03-10 17:05:56 +01:00
Alexander Couzens
79322fd883
ar71xx/sysmocom: fix ap2 calibration data location
...
ap2 has only 8 MB SPI flash
2015-03-10 15:27:30 +01:00
Alexander Couzens
aa67259629
ar71xx/sysmocom: fix ethernet support of sysmo-ap1 & sysmo-jb02
...
wrong ethernet mac was used
2015-03-10 15:25:44 +01:00
Alexander Couzens
e25ed2fede
ar71xx/sysmocom: fix MAC address offset usage.
...
ath79_init_mac(*dest, *src, offset): The offset was misused.
Offset is added to the MAC address value.
2015-03-10 15:25:44 +01:00
Alexander Couzens
ebeadd286c
ar71xx/sysmocom: move network configuration out of _common()
...
The sysmo boards differs to much - put it into board configuration
to improve readability.
2015-03-10 15:25:44 +01:00
Harald Welte
931bb20e63
sob-ap2: Enable GPIO26 + GPIO27 as GPIO, not MDIO
2015-02-21 19:58:58 +01:00
Harald Welte
e67d0c78a6
initial support of the new sysmocom SOB-AP2 (1xPD/3xPSE)
...
Port0 is uplink/PD port (IDC)
Port1-3 are downink/PSE ports (IDC)
Port4 is admin port (RJ45)
* we only have 8 MByte flash
* we use the hardware LEDs for switch ports 1-5
The image boots and is able to establish links on both eth0 and eth1.
However, the LED support is not yet working as expected.
2015-02-21 11:34:52 +01:00
Alexander Couzens
59f13eb186
ar71xx/sysmocom: fix JB02 mips machine
...
setup function name wasn't renamed when mach file split up for both boards
2015-02-18 03:15:47 +01:00
Alexander Couzens
7c5dcd7b26
ar71xx/sysmocom: fix sysmocom miswritten mach type in mach-sysmocom.c
2015-02-18 01:54:24 +01:00
Alexander Couzens
bbc86587e4
add sysmocom devices SOB-AP1 SOB-JB02
2015-02-10 15:51:12 +01:00