For bi-directions, the rules are created in the same form as for downlink
as shown below, so to apply them for uplink, we need to swap the rules
according to the interface.
RX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> Destination <UE_IP> <UE_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
RX : permit in from <UE_IP> <UE_PORT> to <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <UE_IP> <UE_PORT> Destination <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
Both types are defined under lib/proto/type.h, and the conversion
function is used in several different protocols, so let's better move it
to generic lib/proto/conv.h and remove the "gtp2" prefix.
currently if no IP address is available from the configured
subnets in the SMF when attempting to assign an IP to an UE
we assert and the SMF crashes. Handle the error more gracefully
by returning an error cause instead.
As per 3GPP TS 29.274 version 10.5.0, section 7.2.9 and 7.2.10,
Only if PCO IE is included in Delete Session Request then it
must be present in Delete Session Response.
In order to reflect on whether the request contained PCO IE or not
the SMF context containing the GTP request needs to be updated
i.e. update if present else clear the contents
A problem occurred when there was one SGWU/UPF and multiple SGWC/SMF.
When SGWU and UPF create a session, if the SEID is the same,
the existing session information is used without creating an additional session.
These problems were solved by using the F-SEID including IP information
in the process of checking the existing session.
For video in VoNR, multiple QosFlow is required in one session.
In the past, since only one Session Modification Message was supported,
QoS-Flow was put into several Session Messages one by one and processed.
Now that multiple QoS-Flows can be supported,
it is optimized to process one session modification message.
Issue:
When the ULA - Subscription Data does not contain MSISDN, the Create Session Request
from MME to SGW does not contain MSISDN IE resulting in SMF throwing following log
smf | 05/09 15:20:53.683: [smf] ERROR: No MSISDN (../src/smf/s5c-handler.c:82)
sgwc | 05/09 15:20:53.683: [sgwc] ERROR: No Context in TEID (../src/sgwc/s5c-handler.c:104)
mme | 05/09 15:20:53.683: [mme] ERROR: No Context in TEID (../src/mme/mme-s11-handler.c:122)
As per 3GPP TS 29.274 version 16.5.0, table 7.2.1-1: MSISDN IE shall only be included
in Create Session Request if its provided in subscription data from the HSS. This commit
fixes this by removing the mandatory MSISDN IE check in SMF.
It allows for much better control on the lifecycle of the session, and
already shows some missing tear down paths in case of errors.
It also clarifies the existence of "sess" pointer in several paths.
The code also becomes clearer overall, since all the transitions and
logic to send next messages are put together.
Tear down of the session will be integrated into gsm-sm in a follow-up
patch.
The 5gc session setup is only partially moved to gsm-sm, and left as an
exercise for users wishin to improve 5gc support.
In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
* [SMF] typo fixes in commented code
* [SMF] Fix early err return handling UpdatePDPContextRequest
* [SMF] UpdatePDPContext: forward update of remote TEID+IPaddr to UPF
Updating the remote GTP-U IP address and/or TEID on the GGSN is a common
practice, used for instance by an SGSN in a UTRAN network to connect an
HNB(GW) to exchange GTP-U directly with the GGSN. It is also used in
general when doing handovers.
When receiving a UpdatePDPContext with the new address, we need to
forward the update to the UPF so that it takes it into account when
forwarding packets.
This patch only implements updating the information towards the UPF when
GTPv1C is used. Similar approach for GTPv2C (upon receival of Modify
Bearer Request) is still unimplemented.
Related: https://github.com/open5gs/open5gs/issues/1367
* [SMF] Fix potential null pointer dereference
Pointer "sess" was first dereferenced and later on checked for nullness.
This is clearly wrong. Rearrange the code path to make sure the check is
done first, then dereferenced.
* gitignore: Add subprojects/libtins
* cosmetic: Fix whitespace
All process will be forcely exited if it failed to encode the S1AP/NGAP/GTP/PFCP message. It is to make sure there was no problem with the encoding of open5gs.
* Flow-Description use 'to assigned' in Gx Interface
* Support SDF Filter ID
* Support F-TEID's Choose
* BAR(Buffering) is added in PFCP session
* Default Apply Action uses NOCP|BUFF