* Add Diameter Dictionary Elements
* Initial IDR Framework
* Resolve Compile Issues
* Moving Closer
* Compile error
* Somewhat Working stuffing Code
* Add Timestamp Changes
* Cleanup some of this code. mme_s6a_handle_idr in s6a-handler.c removed for now, since it will only come in handy when IDR flag is set to request current location, which would involve breaking out into paging. I think there's a few other things we can do just within fd-path first.
* further removal of mme_s6a_handle_idr
In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
An assert occurs when a NAS message retransmission occurs.
Because there is no `enb_ue` context.
Therefore, before removing enb_ue, all Timers must be stopped
to prevent retransmission of NAS messages.
All process will be forcely exited if it failed to encode the S1AP/NGAP/GTP/PFCP message. It is to make sure there was no problem with the encoding of open5gs.
The AMF shall assign a new 5G-GUTI for a particular UE:
a) during a successful initial registration procedure;
b) during a successful registration procedure
for mobility registration update; and
c) after a successful service request procedure invoked as a response
to a paging request from the network and before the release
of the N1 NAS signalling connection as specified in subclause 5.4.4.1.
The AMF should assign a new 5G-GUTI for a particular UE
during a successful registration procedure
for periodic registration update. The AMF may assign a new 5G-GUTI
at any time for a particular UE by performing
the generic UE configuration update procedure.
Most of the time, an application wants to perform some amount of data buffering
in addition to just responding to events. When we want to write data,
for example, the usual pattern runs something like:
1. Decide that we want to write some data to a connection;
put that data in a buffer.
2. Wait for the connection to become writable
3. Write as much of the data as we can
4. Remember how much we wrote, and if we still have more data to write,
wait for the connection to become writable again.
Now, Open5GS implements the above method by default when transmitting data
in a stream type socket.
So far, no operation was performed when Error Indication was received
from eNodeB. For that reason, I solved #568 issues by controlling
the MME to prevent this from happening.
Now, when GTP-U Error Indication is received, MME and SGW are implemented
to do what they have to do. I hope that the network can be restored
by responding appropriately even if Error Indication occurs.
In TS24.501 Ch 5.5.1.3.8 Abnormal cases on the network side
d) REGISTRATION REQUEST with 5GS registration type IE set to
"mobility registration updating" or "periodic registration updating"
received after the REGISTRATION ACCEPT message has been sent and
before the REGISTRATION COMPLETE message is received.
Since, we have to do this special case, it is desirable
to handle it directly inside the state(gmm-sm.c).
Sukchan Lee
jmasterfunk84
Pau Espin
EugeneBogush
Kenny Barlee