For bi-directions, the rules are created in the same form as for downlink
as shown below, so to apply them for uplink, we need to swap the rules
according to the interface.
RX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> Destination <UE_IP> <UE_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
RX : permit in from <UE_IP> <UE_PORT> to <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <UE_IP> <UE_PORT> Destination <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
o Generate the private key as below.
$ openssl genpkey -algorithm X25519 -out /etc/open5gs/hnet/curve25519-1.key
$ openssl ecparam -name prime256v1 -genkey -conv_form compressed -out /etc/open5gs/hnet/secp256r1-2.key
o The private and public keys can be viewed with the command.
The public key is used when creating the SIM.
$ openssl pkey -in /etc/open5gs/hnet/curve25519-1.key -text
$ openssl ec -in /etc/open5gs/hnet/secp256r1-2.key -conv_form compressed -text
In ausf/udm.yaml
hnet:
o Home network public key identifier(PKI) value : 1
Protection scheme identifier : ECIES scheme profile A
- id: 1
scheme: 1
key: /etc/open5gs/hnet/curve25519-1.key
o Home network public key identifier(PKI) value : 2
Protection scheme identifier : ECIES scheme profile B
- id: 2
scheme: 2
key: /etc/open5gs/hnet/secp256r1-2.key
o Home network public key identifier(PKI) value : 3
Protection scheme identifier : ECIES scheme profile A
- id: 3
scheme: 1
key: /etc/open5gs/hnet/curve25519-1.key
o Home network public key identifier(PKI) value : 4
Protection scheme identifier : ECIES scheme profile B
- id: 4
scheme: 2
key: /etc/open5gs/hnet/secp256r1-2.key
Related to #1779
In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
* Flow-Description use 'to assigned' in Gx Interface
* Support SDF Filter ID
* Support F-TEID's Choose
* BAR(Buffering) is added in PFCP session
* Default Apply Action uses NOCP|BUFF
<DOWNLINK>
RX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> Destination <UE_IP> <UE_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
<UPLINK>
RX : permit in from <UE_IP> <UE_PORT> to <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <UE_IP> <UE_PORT> Destination <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>