Without this change, using metrics with core setup configurations
(configs/vonr.yaml for example) would not be possible. Having one
metrics section for whole config file causes every NF to start metrics
server on same port causing an abort.
The problem occurred in the following scenario:
1. VLR sent PAGING-REQUEST to the MME
2. MME sent S1-Paging to the UE
3. Paging failed
4. MME responded SERVICE-REQUEST to the VLR
5. VLR sent DOWNLINK-UNITDATA to the MME
6. Even though there is no S1 Context,
MME try to sent DownlinkNASTransport message to the UE.
7. So, the problem occurred.
I've changed the number 4 PAGING-REJECT instead of SERVICE-REQUEST.
When a UE that requests slices tries to connect and there are no slices configured, the reject message is:
5GMM cause = 0x7 (5GS Services not allowed)
however it should be:
5GMM cause = 0x3e (No network slices available)
All 5GMM cause value in reject message is reviewed in this commit
All process will be forcely exited if it failed to encode the S1AP/NGAP/GTP/PFCP message. It is to make sure there was no problem with the encoding of open5gs.
The AMF shall assign a new 5G-GUTI for a particular UE:
a) during a successful initial registration procedure;
b) during a successful registration procedure
for mobility registration update; and
c) after a successful service request procedure invoked as a response
to a paging request from the network and before the release
of the N1 NAS signalling connection as specified in subclause 5.4.4.1.
The AMF should assign a new 5G-GUTI for a particular UE
during a successful registration procedure
for periodic registration update. The AMF may assign a new 5G-GUTI
at any time for a particular UE by performing
the generic UE configuration update procedure.
If both Delete-Session-Request/Response and
UEContextReleaseCommand/UEContextReleaseComplete are failed at the same time,
UE cannot attach to the EPC infinitely.
So, I've add the protection code
if timer expires when MME does not receive Delete-Session-Response.
Most of the time, an application wants to perform some amount of data buffering
in addition to just responding to events. When we want to write data,
for example, the usual pattern runs something like:
1. Decide that we want to write some data to a connection;
put that data in a buffer.
2. Wait for the connection to become writable
3. Write as much of the data as we can
4. Remember how much we wrote, and if we still have more data to write,
wait for the connection to become writable again.
Now, Open5GS implements the above method by default when transmitting data
in a stream type socket.
So far, no operation was performed when Error Indication was received
from eNodeB. For that reason, I solved #568 issues by controlling
the MME to prevent this from happening.
Now, when GTP-U Error Indication is received, MME and SGW are implemented
to do what they have to do. I hope that the network can be restored
by responding appropriately even if Error Indication occurs.
In TS24.501 Ch 5.5.1.3.8 Abnormal cases on the network side
d) REGISTRATION REQUEST with 5GS registration type IE set to
"mobility registration updating" or "periodic registration updating"
received after the REGISTRATION ACCEPT message has been sent and
before the REGISTRATION COMPLETE message is received.
Since, we have to do this special case, it is desirable
to handle it directly inside the state(gmm-sm.c).
Sukchan Lee
Bostjan Meglic
Carlos Giraldo
Pau Espin