* Cancel Location while Idle Fix
* Forgot about SGSAP on MME Change.
Added "action" to sgsap_send_detach..
* Make handle_clr uniform with other handlers
* Added Robustness for Any Detach Type
* Memory wasn't freed upon CLR for unknown IMSIs
* Moving MME Detach to new PR
* CLR while idle is broken after 7031856cd7
Cancel Location Request arriving while UE is idle will not proceed to paging due to this check for S1 connection. Using new flag "isAnswer" to bypass this check to allow paging to occur when we are not doing a AIA/ULA related procedure.
* No Context Setup is required when sending the detach request. If the paging was due to wanting to send a Detach Request to the UE, then we fast track to sending the detach request.
* emm-sm.c:
In the case of MME initiated detach while UE is idle, there is no initial conext setup. We go right from the service request after paging into sending the detach request. TS23.401
mme-path.c:
Using nas_eps.type in the case of MME Initiated Detach while UE is idle does not work. nas_eps.type would represent the service request.
mme-s11-handler.c:
After S11 action, no action should be taken. We want to wait for the detach accept from the UE before proceeding with the S1 release (detach).
* InitialContextSetup should occur for detach.
- Added diameter dictionary definitions for Cancel Location
- Cancel Location will completely remove UE from MME, allow for a fresh IMSI attach to occur on next attempt.
- T3422 is used for detach request.
- Added new handling for s6a events in mme-sm, as not all s6a messages are at attach now. Maybe there's something in a state machine I should've been using here instead of a new flag?
- Testing was completed with UE in idle and connected. With CLR flags indicating re-attach required and without. Also sending CLR after UE detach. And then sending again when mme_ue is empty.
When a UE that requests slices tries to connect and there are no slices configured, the reject message is:
5GMM cause = 0x7 (5GS Services not allowed)
however it should be:
5GMM cause = 0x3e (No network slices available)
All 5GMM cause value in reject message is reviewed in this commit
In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
This bug occurs when SGW-C restarts and the next signal occurs
between MME and SGW-C
- Create Session Request/Response
- Modify Bearer Request/Response
All process will be forcely exited if it failed to encode the S1AP/NGAP/GTP/PFCP message. It is to make sure there was no problem with the encoding of open5gs.
So far, no operation was performed when Error Indication was received
from eNodeB. For that reason, I solved #568 issues by controlling
the MME to prevent this from happening.
Now, when GTP-U Error Indication is received, MME and SGW are implemented
to do what they have to do. I hope that the network can be restored
by responding appropriately even if Error Indication occurs.