If the UE continuously attempts to Attach while changing PDN Type,
it will cause the wrong IP to be assigned.
(e.g PDU-Type : IPv4v6 -> IPv4 -> IPv4v6)
This is because we use two variables at the same time,
one to read and store the Static IP from the Subscriber DB and
one to store the IP assigned from SMF, called session->paa.
When the UE attaches with PDN-Type set to IPv4v6,
MME saves the allocated IP in session->paa.
However, MME thinks it has been assigned a static IP based on the information
in session->paa, so changing the PDN-Type may result in the wrong IP
being assigned.
To solve this problem, I separated the variable(session->paa) that stores
the allocated IP received from SMF and the variable(session->ue_ip) that stores
the Static IP read from the Subscriber DB.
Therefore, the information read from the Subscriber DB
(session->session_type and session->ue_ip) should not be modified.
When using ogs_buffer_to_bcd(), an overflow occurs if the input buffer length
is larger than the output bcd size, causing a crash.
We adjusted the size of the input buffer length using ogs_min as follows.
```
sgwc_ue->imsi_len = ogs_min(imsi_len, OGS_MAX_IMSI_LEN);
memcpy(sgwc_ue->imsi, imsi, sgwc_ue->imsi_len);
ogs_buffer_to_bcd(sgwc_ue->imsi, sgwc_ue->imsi_len, sgwc_ue->imsi_bcd);
```
When we run the test, for example,
./tests/registration/registration simple-init,
wee get an INFO message like the one below.
```
05/17 14:24:03.933: [sbi] INFO: NF EndPoint(addr) setup [127.0.0.200:7777] (../lib/sbi/context.c:474)
```
When we run the code in Open5GS, the log level initially defaults to INFO.
However, for test code, we change the log level to ERROR
by automatically inserting the -e error option into argv.
The reason for this is to prevent WARNING and INFO messages
from appearing when the test code is run.
However, the log level to ERROR is changed at the bottom of
the initialize routine, which caused the above message
to be printed during testing.
To prevent this from being printed, I modified the code
to change that log level to ERROR a little earlier.
If a Create Bearer Response occurs after a Delete Bearer Response,
SGW-C crashes.
The execution is stopped by the following ASSERT
because it tries to access the UL Tunnel
deleted by the Delete Bearer Response.
```
03/28 17:28:41.229: [gtp] DEBUG: [7] LOCAL Find GTPv2 peer [172.22.0.9]:2123 (../lib/gtp/xact.c:949)
03/28 17:28:41.229: [gtp] DEBUG: [7] LOCAL Receive peer [172.22.0.9]:2123 (../lib/gtp/xact.c:966)
03/28 17:28:41.229: [gtp] DEBUG: [7] LOCAL UPD RX-96 peer [172.22.0.9]:2123 (../lib/gtp/xact.c:448)
03/28 17:28:41.229: [sgwc] DEBUG: Create Bearer Response (../src/sgwc/s11-handler.c:707)
03/28 17:28:41.229: [gtp] DEBUG: [7] LOCAL Commit peer [172.22.0.9]:2123 (../lib/gtp/xact.c:629)
03/28 17:28:41.230: [gtp] DEBUG: [7] LOCAL Delete peer [172.22.0.9]:2123 (../lib/gtp/xact.c:1149)
03/28 17:28:41.230: [sgwc] FATAL: sgwc_s11_handle_create_bearer_response: Assertion `ul_tunnel' failed. (../src/sgwc/s11-handler.c:802)
03/28 17:28:41.231: [core] FATAL: backtrace() returned 8 addresses (../lib/core/ogs-abort.c:37)
./open5gs-sgwcd(+0x189b7) [0x5b3c92cf09b7]
./open5gs-sgwcd(+0x13c6d) [0x5b3c92cebc6d]
/open5gs/install/lib/x86_64-linux-gnu/libogscore.so.2(ogs_fsm_dispatch+0x113) [0x70600ed63402]
./open5gs-sgwcd(+0x629d) [0x5b3c92cde29d]
/open5gs/install/lib/x86_64-linux-gnu/libogscore.so.2(+0x11754) [0x70600ed54754]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x8609) [0x70600ecfc609]
/lib/x86_64-linux-gnu/libc.so.6(clone+0x43) [0x70600ec21353]
```
To solve this problem, I have modified to handle the exception appropriately,
display the error situation in the Cause of the Create Bearer Response,
and proceed with the execution.
'node_timeout' and some other functions can remove a smf_sess_t
while that session is still waiting for a PFCP reply
and has an active PFCP xact.
In this case, xact->data points to the deleted session
and xact's timeout function (sess_5gc_timeout for example)
eventually refers to this already freed session.
This fix prevents duplicate deletes from occurring by checking to see
if the session context has already been deleted when the timeout occurs.
Additionally, it moves session deletions out of timer callbacks into
state machine by reselect_upf().
Due to the way 'ogs_timer_mgr_expire' calls timer callbacks,
one must not stop or expire timers from within a timer callback.
And now one must not remove sessions from within a timer callback.
If eg. PCRF or AAA diameter link is not yet ready (eg. PCRF crashed), and
a client sends a CreateSessionRequest announcing its ow F-TEID,
then open5gs-smfd answers with Create Session Response Cause=
"Remote peer not responding", but it is not setting the received F-TEID
in the header of the response, instead it sends with TEI=0.
As a result, the peer cannot match the CreateSessionResponse, and needs
to rely on its own timeout timer to figure out that specific request failed.
This also happens in PFCP, so to solve this problem, I added teid/seid_presence
to the interface that sends the error message as shown below.
void ogs_gtp2_send_error_message(ogs_gtp_xact_t *xact,
int teid_presence, uint32_t teid, uint8_t type, uint8_t cause_value);
void ogs_pfcp_send_error_message(
ogs_pfcp_xact_t *xact, int seid_presence, uint64_t seid, uint8_t type,
uint8_t cause_value, uint16_t offending_ie_value);
As mentioned in the sgwu.yaml configuration file, it is possible to configure multiple addresses with different source_interface values for the gtpu interface.
Following the this section, I defined two addresses, one with source_interface set to 0 and another with source_interface set to 1. My expectation was to see different addresses for the two PDRs in the Session Establishment Response message during session establishment. However, both addresses were the same, and it was the address I had set for source_interface = 0.
When I looked into the code, I found the reason for the issue. In the lib/pfcp/context.c file, on line 1185, the function that determines the address is called as follows:
...
} else {
ogs_gtpu_resource_t *resource = NULL;
resource = ogs_pfcp_find_gtpu_resource(
&ogs_gtp_self()->gtpu_resource_list,
pdr->dnn, OGS_PFCP_INTERFACE_ACCESS);
if (resource) {
...
In the last parameter of this function, a constant value, OGS_PFCP_INTERFACE_ACCESS, is used. This causes every PDR with any source_interface to be considered as "access," and the value 0 is used for its interface.
I replaced the value with pdr->src_if, and the bug was resolved.
../lib/core/ogs-list.h:62:24: warning: invalid conversion from 'void*' to 'ogs_list_t*' {aka 'ogs_list_s*'} [-fpermissive]
../lib/core/ogs-rbtree.h:79:32: warning: invalid conversion from 'const void*' to 'const ogs_rbnode_t*' {aka 'const ogs_rbnode_s*'} [-fpermissive]
[SBI] Fix compiler error - possible uninitialized variable
[SCP] Fix compiler error - Error: this condition has identical branches
In case of additional compiler warnings turned on, the compiler warns
about potentially unused variables. Fix those issues.
TS23.007 17.4.1
19A PFCP based restart procedures
After a PFCP entity has restarted, it shall immediately update all local Recovery Time Stamps and shall clear all remote
Recovery Time Stamps. When peer PFCP entities information is available, i.e. when the PFCP Association is still alive,
the restarted PFCP entity shall send its updated Recovery Time Stamps in a Heartbeat Request message to the peer
PFCP entities before initiating any PFCP session signalling.
A buffer overflow occurred in ALPINE
because the size of the pfcp message structure increased by
ogs_pfcp_tlv_framed_route_t framed_route[8];
ogs_pfcp_tlv_framed_ipv6_route_t framed_ipv6_route[8];
Sukchan Lee
Bostjan Meglic
Šimon Lukašík
mitmitmitm
Spencer Sevilla
Pau Espin