original development tree for Linux kernel GTP module; now long in mainline.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 

376 lines
10 KiB

#
# General architecture dependent options
#
config OPROFILE
tristate "OProfile system profiling"
depends on PROFILING
depends on HAVE_OPROFILE
select RING_BUFFER
select RING_BUFFER_ALLOW_SWAP
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
and applications.
If unsure, say N.
config OPROFILE_EVENT_MULTIPLEX
bool "OProfile multiplexing support (EXPERIMENTAL)"
default n
depends on OPROFILE && X86
help
The number of hardware counters is limited. The multiplexing
feature enables OProfile to gather more events than counters
are provided by the hardware. This is realized by switching
between events at an user specified time interval.
If unsure, say N.
config HAVE_OPROFILE
bool
config OPROFILE_NMI_TIMER
def_bool y
depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI
config KPROBES
bool "Kprobes"
depends on MODULES
depends on HAVE_KPROBES
select KALLSYMS
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
a probepoint and specifies the callback. Kprobes is useful
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
config JUMP_LABEL
bool "Optimize very unlikely/likely branches"
depends on HAVE_ARCH_JUMP_LABEL
help
This option enables a transparent branch optimization that
makes certain almost-always-true or almost-always-false branch
conditions even cheaper to execute within the kernel.
Certain performance-sensitive kernel code, such as trace points,
scheduler functionality, networking code and KVM have such
branches and include support for this optimization technique.
If it is detected that the compiler has support for "asm goto",
the kernel will compile such branches with just a nop
instruction. When the condition flag is toggled to true, the
nop will be converted to a jump instruction to execute the
conditional block of instructions.
This technique lowers overhead and stress on the branch prediction
of the processor and generally makes the kernel faster. The update
of the condition is slower, but those are always very rare.
( On 32-bit x86, the necessary options added to the compiler
flags may increase the size of the kernel slightly. )
config OPTPROBES
def_bool y
depends on KPROBES && HAVE_OPTPROBES
depends on !PREEMPT
config UPROBES
bool "Transparent user-space probes (EXPERIMENTAL)"
depends on UPROBE_EVENT && PERF_EVENTS
default n
select PERCPU_RWSEM
help
Uprobes is the user-space counterpart to kprobes: they
enable instrumentation applications (such as 'perf probe')
to establish unintrusive probes in user-space binaries and
libraries, by executing handler functions when the probes
are hit by user-space applications.
( These probes come in the form of single-byte breakpoints,
managed by the kernel and kept transparent to the probed
application. )
If in doubt, say "N".
config HAVE_EFFICIENT_UNALIGNED_ACCESS
bool
help
Some architectures are unable to perform unaligned accesses
without the use of get_unaligned/put_unaligned. Others are
unable to perform such accesses efficiently (e.g. trap on
unaligned access and require fixing it up in the exception
handler.)
This symbol should be selected by an architecture if it can
perform unaligned accesses efficiently to allow different
code paths to be selected for these cases. Some network
drivers, for example, could opt to not fix up alignment
problems with received packets if doing so would not help
much.
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
config ARCH_USE_BUILTIN_BSWAP
bool
help
Modern versions of GCC (since 4.4) have builtin functions
for handling byte-swapping. Using these, instead of the old
inline assembler that the architecture code provides in the
__arch_bswapXX() macros, allows the compiler to see what's
happening and offers more opportunity for optimisation. In
particular, the compiler will be able to combine the byteswap
with a nearby load or store and use load-and-swap or
store-and-swap instructions if the architecture has them. It
should almost *never* result in code which is worse than the
hand-coded assembler in <asm/swab.h>. But just in case it
does, the use of the builtins is optional.
Any architecture with load-and-swap or store-and-swap
instructions should set this. And it shouldn't hurt to set it
on architectures that don't have such instructions.
config HAVE_SYSCALL_WRAPPERS
bool
config KRETPROBES
def_bool y
depends on KPROBES && HAVE_KRETPROBES
config USER_RETURN_NOTIFIER
bool
depends on HAVE_USER_RETURN_NOTIFIER
help
Provide a kernel-internal notification when a cpu is about to
switch to user mode.
config HAVE_IOREMAP_PROT
bool
config HAVE_KPROBES
bool
config HAVE_KRETPROBES
bool
config HAVE_OPTPROBES
bool
config HAVE_NMI_WATCHDOG
bool
#
# An arch should select this if it provides all these things:
#
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
# TIF_SYSCALL_TRACE calls tracehook_report_syscall_{entry,exit}
# TIF_NOTIFY_RESUME calls tracehook_notify_resume()
# signal delivery calls tracehook_signal_handler()
#
config HAVE_ARCH_TRACEHOOK
bool
config HAVE_DMA_ATTRS
bool
config HAVE_DMA_CONTIGUOUS
bool
config USE_GENERIC_SMP_HELPERS
bool
config GENERIC_SMP_IDLE_THREAD
bool
# Select if arch init_task initializer is different to init/init_task.c
config ARCH_INIT_TASK
bool
# Select if arch has its private alloc_task_struct() function
config ARCH_TASK_STRUCT_ALLOCATOR
bool
# Select if arch has its private alloc_thread_info() function
config ARCH_THREAD_INFO_ALLOCATOR
bool
config HAVE_REGS_AND_STACK_ACCESS_API
bool
help
This symbol should be selected by an architecure if it supports
the API needed to access registers and stack entries from pt_regs,
declared in asm/ptrace.h
For example the kprobes-based event tracer needs this API.
config HAVE_CLK
bool
help
The <linux/clk.h> calls support software clock gating and
thus are a key power management tool on many systems.
config HAVE_DMA_API_DEBUG
bool
config HAVE_HW_BREAKPOINT
bool
depends on PERF_EVENTS
config HAVE_MIXED_BREAKPOINTS_REGS
bool
depends on HAVE_HW_BREAKPOINT
help
Depending on the arch implementation of hardware breakpoints,
some of them have separate registers for data and instruction
breakpoints addresses, others have mixed registers to store
them but define the access type in a control register.
Select this option if your arch implements breakpoints under the
latter fashion.
config HAVE_USER_RETURN_NOTIFIER
bool
config HAVE_PERF_EVENTS_NMI
bool
help
System hardware can generate an NMI using the perf event
subsystem. Also has support for calculating CPU cycle events
to determine how many clock cycles in a given period.
config HAVE_PERF_REGS
bool
help
Support selective register dumps for perf events. This includes
bit-mapping of each registers and a unique architecture id.
config HAVE_PERF_USER_STACK_DUMP
bool
help
Support user stack dumps for perf event samples. This needs
access to the user stack pointer which is not unified across
architectures.
config HAVE_ARCH_JUMP_LABEL
bool
config HAVE_ARCH_MUTEX_CPU_RELAX
bool
config HAVE_RCU_TABLE_FREE
bool
config ARCH_HAVE_NMI_SAFE_CMPXCHG
bool
config HAVE_ALIGNED_STRUCT_PAGE
bool
help
This makes sure that struct pages are double word aligned and that
e.g. the SLUB allocator can perform double word atomic operations
on a struct page for better performance. However selecting this
might increase the size of a struct page by a word.
config HAVE_CMPXCHG_LOCAL
bool
config HAVE_CMPXCHG_DOUBLE
bool
config ARCH_WANT_IPC_PARSE_VERSION
bool
config ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
config ARCH_WANT_OLD_COMPAT_IPC
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
config HAVE_ARCH_SECCOMP_FILTER
bool
help
An arch should select this symbol if it provides all of these things:
- syscall_get_arch()
- syscall_get_arguments()
- syscall_rollback()
- syscall_set_return_value()
- SIGSYS siginfo_t support
- secure_computing is called from a ptrace_event()-safe context
- secure_computing return value is checked and a return value of -1
results in the system call being skipped immediately.
config SECCOMP_FILTER
def_bool y
depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET
help
Enable tasks to build secure computing environments defined
in terms of Berkeley Packet Filter programs which implement
task-defined system call filtering polices.
See Documentation/prctl/seccomp_filter.txt for details.
config HAVE_CONTEXT_TRACKING
bool
help
Provide kernel/user boundaries probes necessary for subsystems
that need it, such as userspace RCU extended quiescent state.
Syscalls need to be wrapped inside user_exit()-user_enter() through
the slow path using TIF_NOHZ flag. Exceptions handlers must be
wrapped as well. Irqs are already protected inside
rcu_irq_enter/rcu_irq_exit() but preemption or signal handling on
irq exit still need to be protected.
config HAVE_VIRT_CPU_ACCOUNTING
bool
config HAVE_IRQ_TIME_ACCOUNTING
bool
help
Archs need to ensure they use a high enough resolution clock to
support irq time accounting and then call enable_sched_clock_irqtime().
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
bool
config HAVE_MOD_ARCH_SPECIFIC
bool
help
The arch uses struct mod_arch_specific to store data. Many arches
just need a simple module loader without arch specific data - those
should not enable this.
config MODULES_USE_ELF_RELA
bool
help
Modules only use ELF RELA relocations. Modules with ELF REL
relocations will give an error.
config MODULES_USE_ELF_REL
bool
help
Modules only use ELF REL relocations. Modules with ELF RELA
relocations will give an error.
config GENERIC_SIGALTSTACK
bool
#
# ABI hall of shame
#
config CLONE_BACKWARDS
bool
help
Architecture has tls passed as the 4th argument of clone(2),
not the 5th one.
config CLONE_BACKWARDS2
bool
help
Architecture has the first two arguments of clone(2) swapped.
source "kernel/gcov/Kconfig"