Browse Source

USB fixes for 3.13-rc3

Here are a bunch of USB fixes for 3.13-rc3.
 
 Nothing major, but we seem to have an argument about a XHCI fix, so I'm not
 including a revert that Sarah requested, because that breaks a USB network
 driver, and I can't revert the USB network driver fix without reintroducing
 other bugs that it fixed.  So as it is, everything should now be
 working.  Worse case, I can revert the XHCI fix before 3.13-final is
 out, but it seems to work well here with my testing, so all should be
 good.
 
 Other than that, some driver updates based on reports.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlKiEuYACgkQMUfUDdst+ymE8ACgnDT8s4FtrYfoyOo5K4TVTRaZ
 S2wAn3+Xa2TX1Sym+ltJry7N1jRnY2Qy
 =JUaB
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 3.13-rc3.

  Nothing major, but we seem to have an argument about a XHCI fix, so
  I'm not including a revert that Sarah requested, because that breaks a
  USB network driver, and I can't revert the USB network driver fix
  without reintroducing other bugs that it fixed.  So as it is,
  everything should now be working.  Worse case, I can revert the XHCI
  fix before 3.13-final is out, but it seems to work well here with my
  testing, so all should be good.

  Other than that, some driver updates based on reports"

* tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
  usb: ohci-pxa27x: include linux/dma-mapping.h
  USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem
  usb: tools: fix a regression issue that gcc can't link to pthread
  USB: switch maintainership of chipidea to Peter
  USB: pl2303: fixed handling of CS5 setting
  USB: ftdi_sio: fixed handling of unsupported CSIZE setting
  USB: mos7840: correct handling of CS5 setting
  USB: spcp8x5: correct handling of CS5 setting
  usb: wusbcore: fix deadlock in wusbhc_gtk_rekey
  usb: wusbcore: do device lookup while holding the hc mutex
  usb: wusbcore: send keepalives to unauthenticated devices
  USB: option: support new huawei devices
  USB: serial: option: blacklist interface 1 for Huawei E173s-6
  usb: xhci: Link TRB must not occur within a USB payload burst
  usb: gadget: f_mass_storage: call try_to_freeze only when its safe
  usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt static
  usb: gadget: ffs: fix sparse warning
  usb: gadget: zero: module parameters can be static
  usb: gadget: storage: fix sparse warning
  ...
master
Linus Torvalds 8 years ago
parent
commit
b19d69c72d
  1. 3
      MAINTAINERS
  2. 2
      drivers/usb/class/cdc-acm.c
  3. 5
      drivers/usb/core/hub.c
  4. 2
      drivers/usb/dwc3/ep0.c
  5. 5
      drivers/usb/dwc3/gadget.c
  6. 1
      drivers/usb/gadget/Kconfig
  7. 1
      drivers/usb/gadget/composite.c
  8. 2
      drivers/usb/gadget/f_fs.c
  9. 27
      drivers/usb/gadget/f_mass_storage.c
  10. 1
      drivers/usb/gadget/pxa25x_udc.c
  11. 7
      drivers/usb/gadget/s3c-hsotg.c
  12. 4
      drivers/usb/gadget/storage_common.h
  13. 2
      drivers/usb/gadget/tcm_usb_gadget.c
  14. 6
      drivers/usb/gadget/zero.c
  15. 1
      drivers/usb/host/ohci-pxa27x.c
  16. 54
      drivers/usb/host/xhci-ring.c
  17. 9
      drivers/usb/musb/musb_core.c
  18. 164
      drivers/usb/musb/musb_cppi41.c
  19. 4
      drivers/usb/musb/musb_gadget.c
  20. 5
      drivers/usb/phy/phy-am335x.c
  21. 68
      drivers/usb/phy/phy-generic.c
  22. 4
      drivers/usb/phy/phy-generic.h
  23. 2
      drivers/usb/phy/phy-mxs-usb.c
  24. 4
      drivers/usb/phy/phy-rcar-gen2-usb.c
  25. 37
      drivers/usb/serial/ftdi_sio.c
  26. 12
      drivers/usb/serial/generic.c
  27. 32
      drivers/usb/serial/mos7840.c
  28. 27
      drivers/usb/serial/option.c
  29. 30
      drivers/usb/serial/pl2303.c
  30. 30
      drivers/usb/serial/spcp8x5.c
  31. 72
      drivers/usb/wusbcore/devconnect.c
  32. 98
      drivers/usb/wusbcore/security.c
  33. 6
      drivers/usb/wusbcore/wusbhc.h
  34. 2
      include/linux/usb.h
  35. 2
      include/linux/usb/wusb.h
  36. 5
      tools/usb/Makefile

3
MAINTAINERS

@ -2138,7 +2138,8 @@ S: Maintained
F: Documentation/zh_CN/
CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
M: Peter Chen <Peter.Chen@freescale.com>
T: git://github.com/hzpeterchen/linux-usb.git
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/chipidea/

2
drivers/usb/class/cdc-acm.c

@ -1515,6 +1515,8 @@ static int acm_reset_resume(struct usb_interface *intf)
static const struct usb_device_id acm_ids[] = {
/* quirky and broken devices */
{ USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */
.driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
{ USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},

5
drivers/usb/core/hub.c

@ -4832,8 +4832,9 @@ static void hub_events(void)
hub->ports[i - 1]->child;
dev_dbg(hub_dev, "warm reset port %d\n", i);
if (!udev || !(portstatus &
USB_PORT_STAT_CONNECTION)) {
if (!udev ||
!(portstatus & USB_PORT_STAT_CONNECTION) ||
udev->state == USB_STATE_NOTATTACHED) {
status = hub_port_reset(hub, i,
NULL, HUB_BH_RESET_TIME,
true);

2
drivers/usb/dwc3/ep0.c

@ -459,6 +459,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
dep = dwc3_wIndex_to_dep(dwc, wIndex);
if (!dep)
return -EINVAL;
if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
break;
ret = __dwc3_gadget_ep_set_halt(dep, set);
if (ret)
return -EINVAL;

5
drivers/usb/dwc3/gadget.c

@ -1200,9 +1200,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
else
dep->flags |= DWC3_EP_STALL;
} else {
if (dep->flags & DWC3_EP_WEDGE)
return 0;
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
DWC3_DEPCMD_CLEARSTALL, &params);
if (ret)
@ -1210,7 +1207,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
value ? "set" : "clear",
dep->name);
else
dep->flags &= ~DWC3_EP_STALL;
dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
}
return ret;

1
drivers/usb/gadget/Kconfig

@ -682,6 +682,7 @@ config USB_CONFIGFS_PHONET
config USB_CONFIGFS_MASS_STORAGE
boolean "Mass storage"
depends on USB_CONFIGFS
depends on BLOCK
select USB_F_MASS_STORAGE
help
The Mass Storage Gadget acts as a USB Mass Storage disk drive.

1
drivers/usb/gadget/composite.c

@ -593,6 +593,7 @@ static void reset_config(struct usb_composite_dev *cdev)
bitmap_zero(f->endpoints, 32);
}
cdev->config = NULL;
cdev->delayed_status = 0;
}
static int set_config(struct usb_composite_dev *cdev,

2
drivers/usb/gadget/f_fs.c

@ -1304,7 +1304,7 @@ static struct ffs_data *ffs_data_new(void)
{
struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL);
if (unlikely(!ffs))
return 0;
return NULL;
ENTER();

27
drivers/usb/gadget/f_mass_storage.c

@ -523,7 +523,7 @@ static int fsg_setup(struct usb_function *f,
*/
DBG(fsg, "bulk reset request\n");
raise_exception(fsg->common, FSG_STATE_RESET);
return DELAYED_STATUS;
return USB_GADGET_DELAYED_STATUS;
case US_BULK_GET_MAX_LUN:
if (ctrl->bRequestType !=
@ -602,13 +602,14 @@ static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
return true;
}
static int sleep_thread(struct fsg_common *common)
static int sleep_thread(struct fsg_common *common, bool can_freeze)
{
int rc = 0;
/* Wait until a signal arrives or we are woken up */
for (;;) {
try_to_freeze();
if (can_freeze)
try_to_freeze();
set_current_state(TASK_INTERRUPTIBLE);
if (signal_pending(current)) {
rc = -EINTR;
@ -682,7 +683,7 @@ static int do_read(struct fsg_common *common)
/* Wait for the next buffer to become available */
bh = common->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
rc = sleep_thread(common);
rc = sleep_thread(common, false);
if (rc)
return rc;
}
@ -937,7 +938,7 @@ static int do_write(struct fsg_common *common)
}
/* Wait for something to happen */
rc = sleep_thread(common);
rc = sleep_thread(common, false);
if (rc)
return rc;
}
@ -1504,7 +1505,7 @@ static int throw_away_data(struct fsg_common *common)
}
/* Otherwise wait for something to happen */
rc = sleep_thread(common);
rc = sleep_thread(common, true);
if (rc)
return rc;
}
@ -1625,7 +1626,7 @@ static int send_status(struct fsg_common *common)
/* Wait for the next buffer to become available */
bh = common->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
rc = sleep_thread(common);
rc = sleep_thread(common, true);
if (rc)
return rc;
}
@ -1828,7 +1829,7 @@ static int do_scsi_command(struct fsg_common *common)
bh = common->next_buffhd_to_fill;
common->next_buffhd_to_drain = bh;
while (bh->state != BUF_STATE_EMPTY) {
rc = sleep_thread(common);
rc = sleep_thread(common, true);
if (rc)
return rc;
}
@ -2174,7 +2175,7 @@ static int get_next_command(struct fsg_common *common)
/* Wait for the next buffer to become available */
bh = common->next_buffhd_to_fill;
while (bh->state != BUF_STATE_EMPTY) {
rc = sleep_thread(common);
rc = sleep_thread(common, true);
if (rc)
return rc;
}
@ -2193,7 +2194,7 @@ static int get_next_command(struct fsg_common *common)
/* Wait for the CBW to arrive */
while (bh->state != BUF_STATE_FULL) {
rc = sleep_thread(common);
rc = sleep_thread(common, true);
if (rc)
return rc;
}
@ -2379,7 +2380,7 @@ static void handle_exception(struct fsg_common *common)
}
if (num_active == 0)
break;
if (sleep_thread(common))
if (sleep_thread(common, true))
return;
}
@ -2516,7 +2517,7 @@ static int fsg_main_thread(void *common_)
}
if (!common->running) {
sleep_thread(common);
sleep_thread(common, true);
continue;
}
@ -3111,7 +3112,7 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
fsg->common->can_stall);
if (ret)
return ret;
fsg_common_set_inquiry_string(fsg->common, 0, 0);
fsg_common_set_inquiry_string(fsg->common, NULL, NULL);
ret = fsg_common_run_thread(fsg->common);
if (ret)
return ret;

1
drivers/usb/gadget/pxa25x_udc.c

@ -54,6 +54,7 @@
*/
#ifdef CONFIG_ARCH_PXA
#include <mach/pxa25x-udc.h>
#include <mach/hardware.h>
#endif
#ifdef CONFIG_ARCH_LUBBOCK

7
drivers/usb/gadget/s3c-hsotg.c

@ -1180,6 +1180,7 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
}
static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg);
static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg);
/**
* s3c_hsotg_process_control - process a control request
@ -1221,6 +1222,7 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
switch (ctrl->bRequest) {
case USB_REQ_SET_ADDRESS:
s3c_hsotg_disconnect(hsotg);
dcfg = readl(hsotg->regs + DCFG);
dcfg &= ~DCFG_DevAddr_MASK;
dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT;
@ -1245,7 +1247,9 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
/* as a fallback, try delivering it to the driver to deal with */
if (ret == 0 && hsotg->driver) {
spin_unlock(&hsotg->lock);
ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
spin_lock(&hsotg->lock);
if (ret < 0)
dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
}
@ -1308,10 +1312,12 @@ static void s3c_hsotg_complete_setup(struct usb_ep *ep,
return;
}
spin_lock(&hsotg->lock);
if (req->actual == 0)
s3c_hsotg_enqueue_setup(hsotg);
else
s3c_hsotg_process_control(hsotg, req->buf);
spin_unlock(&hsotg->lock);
}
/**
@ -2533,7 +2539,6 @@ irq_retry:
writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS);
call_gadget(hsotg, suspend);
s3c_hsotg_disconnect(hsotg);
}
if (gintsts & GINTSTS_WkUpInt) {

4
drivers/usb/gadget/storage_common.h

@ -119,10 +119,6 @@ static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
return curlun->filp != NULL;
}
/* Big enough to hold our biggest descriptor */
#define EP0_BUFSIZE 256
#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */
/* Default size of buffer length. */
#define FSG_BUFLEN ((u32)16384)

2
drivers/usb/gadget/tcm_usb_gadget.c

@ -370,7 +370,7 @@ err:
return -ENOMEM;
}
void bot_cleanup_old_alt(struct f_uas *fu)
static void bot_cleanup_old_alt(struct f_uas *fu)
{
if (!(fu->flags & USBG_ENABLED))
return;

6
drivers/usb/gadget/zero.c

@ -91,17 +91,17 @@ static struct usb_zero_options gzero_options = {
* functional coverage for the "USBCV" test harness from USB-IF.
* It's always set if OTG mode is enabled.
*/
unsigned autoresume = DEFAULT_AUTORESUME;
static unsigned autoresume = DEFAULT_AUTORESUME;
module_param(autoresume, uint, S_IRUGO);
MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
/* Maximum Autoresume time */
unsigned max_autoresume;
static unsigned max_autoresume;
module_param(max_autoresume, uint, S_IRUGO);
MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup");
/* Interval between two remote wakeups */
unsigned autoresume_interval_ms;
static unsigned autoresume_interval_ms;
module_param(autoresume_interval_ms, uint, S_IRUGO);
MODULE_PARM_DESC(autoresume_interval_ms,
"milliseconds to increase successive wakeup delays");

1
drivers/usb/host/ohci-pxa27x.c

@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>

54
drivers/usb/host/xhci-ring.c

@ -2973,8 +2973,58 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
}
while (1) {
if (room_on_ring(xhci, ep_ring, num_trbs))
break;
if (room_on_ring(xhci, ep_ring, num_trbs)) {
union xhci_trb *trb = ep_ring->enqueue;
unsigned int usable = ep_ring->enq_seg->trbs +
TRBS_PER_SEGMENT - 1 - trb;
u32 nop_cmd;
/*
* Section 4.11.7.1 TD Fragments states that a link
* TRB must only occur at the boundary between
* data bursts (eg 512 bytes for 480M).
* While it is possible to split a large fragment
* we don't know the size yet.
* Simplest solution is to fill the trb before the
* LINK with nop commands.
*/
if (num_trbs == 1 || num_trbs <= usable || usable == 0)
break;
if (ep_ring->type != TYPE_BULK)
/*
* While isoc transfers might have a buffer that
* crosses a 64k boundary it is unlikely.
* Since we can't add NOPs without generating
* gaps in the traffic just hope it never
* happens at the end of the ring.
* This could be fixed by writing a LINK TRB
* instead of the first NOP - however the
* TRB_TYPE_LINK_LE32() calls would all need
* changing to check the ring length.
*/
break;
if (num_trbs >= TRBS_PER_SEGMENT) {
xhci_err(xhci, "Too many fragments %d, max %d\n",
num_trbs, TRBS_PER_SEGMENT - 1);
return -ENOMEM;
}
nop_cmd = cpu_to_le32(TRB_TYPE(TRB_TR_NOOP) |
ep_ring->cycle_state);
ep_ring->num_trbs_free -= usable;
do {
trb->generic.field[0] = 0;
trb->generic.field[1] = 0;
trb->generic.field[2] = 0;
trb->generic.field[3] = nop_cmd;
trb++;
} while (--usable);
ep_ring->enqueue = trb;
if (room_on_ring(xhci, ep_ring, num_trbs))
break;
}
if (ep_ring == xhci->cmd_ring) {
xhci_err(xhci, "Do not support expand command ring\n");

9
drivers/usb/musb/musb_core.c

@ -1809,7 +1809,6 @@ static void musb_free(struct musb *musb)
disable_irq_wake(musb->nIrq);
free_irq(musb->nIrq, musb);
}
cancel_work_sync(&musb->irq_work);
musb_host_free(musb);
}
@ -1896,6 +1895,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb_platform_disable(musb);
musb_generic_disable(musb);
/* Init IRQ workqueue before request_irq */
INIT_WORK(&musb->irq_work, musb_irq_work);
/* setup musb parts of the core (especially endpoints) */
status = musb_core_init(plat->config->multipoint
? MUSB_CONTROLLER_MHDRC
@ -1905,9 +1907,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
/* Init IRQ workqueue before request_irq */
INIT_WORK(&musb->irq_work, musb_irq_work);
/* attach to the IRQ */
if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
dev_err(dev, "request_irq %d failed!\n", nIrq);
@ -1981,6 +1980,7 @@ fail4:
musb_host_cleanup(musb);
fail3:
cancel_work_sync(&musb->irq_work);
if (musb->dma_controller)
dma_controller_destroy(musb->dma_controller);
fail2_5:
@ -2043,6 +2043,7 @@ static int musb_remove(struct platform_device *pdev)
if (musb->dma_controller)
dma_controller_destroy(musb->dma_controller);
cancel_work_sync(&musb->irq_work);
musb_free(musb);
device_init_wakeup(dev, 0);
return 0;

164
drivers/usb/musb/musb_cppi41.c

@ -38,6 +38,7 @@ struct cppi41_dma_channel {
u32 prog_len;
u32 transferred;
u32 packet_sz;
struct list_head tx_check;
};
#define MUSB_DMA_NUM_CHANNELS 15
@ -47,6 +48,8 @@ struct cppi41_dma_controller {
struct cppi41_dma_channel rx_channel[MUSB_DMA_NUM_CHANNELS];
struct cppi41_dma_channel tx_channel[MUSB_DMA_NUM_CHANNELS];
struct musb *musb;
struct hrtimer early_tx;
struct list_head early_tx_list;
u32 rx_mode;
u32 tx_mode;
u32 auto_req;
@ -96,31 +99,27 @@ static void update_rx_toggle(struct cppi41_dma_channel *cppi41_channel)
cppi41_channel->usb_toggle = toggle;
}
static void cppi41_dma_callback(void *private_data)
static bool musb_is_tx_fifo_empty(struct musb_hw_ep *hw_ep)
{
struct dma_channel *channel = private_data;
struct cppi41_dma_channel *cppi41_channel = channel->private_data;
struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
struct musb *musb = hw_ep->musb;
unsigned long flags;
struct dma_tx_state txstate;
u32 transferred;
u8 epnum = hw_ep->epnum;
struct musb *musb = hw_ep->musb;
void __iomem *epio = musb->endpoints[epnum].regs;
u16 csr;
spin_lock_irqsave(&musb->lock, flags);
csr = musb_readw(epio, MUSB_TXCSR);
if (csr & MUSB_TXCSR_TXPKTRDY)
return false;
return true;
}
dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
&txstate);
transferred = cppi41_channel->prog_len - txstate.residue;
cppi41_channel->transferred += transferred;
static void cppi41_dma_callback(void *private_data);
dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n",
hw_ep->epnum, cppi41_channel->transferred,
cppi41_channel->total_len);
static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel)
{
struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
struct musb *musb = hw_ep->musb;
update_rx_toggle(cppi41_channel);
if (cppi41_channel->transferred == cppi41_channel->total_len ||
transferred < cppi41_channel->packet_sz) {
if (!cppi41_channel->prog_len) {
/* done, complete */
cppi41_channel->channel.actual_len =
@ -150,13 +149,11 @@ static void cppi41_dma_callback(void *private_data)
remain_bytes,
direction,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (WARN_ON(!dma_desc)) {
spin_unlock_irqrestore(&musb->lock, flags);
if (WARN_ON(!dma_desc))
return;
}
dma_desc->callback = cppi41_dma_callback;
dma_desc->callback_param = channel;
dma_desc->callback_param = &cppi41_channel->channel;
cppi41_channel->cookie = dma_desc->tx_submit(dma_desc);
dma_async_issue_pending(dc);
@ -166,6 +163,117 @@ static void cppi41_dma_callback(void *private_data)
musb_writew(epio, MUSB_RXCSR, csr);
}
}
}
static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer)
{
struct cppi41_dma_controller *controller;
struct cppi41_dma_channel *cppi41_channel, *n;
struct musb *musb;
unsigned long flags;
enum hrtimer_restart ret = HRTIMER_NORESTART;
controller = container_of(timer, struct cppi41_dma_controller,
early_tx);
musb = controller->musb;
spin_lock_irqsave(&musb->lock, flags);
list_for_each_entry_safe(cppi41_channel, n, &controller->early_tx_list,
tx_check) {
bool empty;
struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
empty = musb_is_tx_fifo_empty(hw_ep);
if (empty) {
list_del_init(&cppi41_channel->tx_check);
cppi41_trans_done(cppi41_channel);
}
}
if (!list_empty(&controller->early_tx_list)) {
ret = HRTIMER_RESTART;
hrtimer_forward_now(&controller->early_tx,
ktime_set(0, 150 * NSEC_PER_USEC));
}
spin_unlock_irqrestore(&musb->lock, flags);
return ret;
}
static void cppi41_dma_callback(void *private_data)
{
struct dma_channel *channel = private_data;
struct cppi41_dma_channel *cppi41_channel = channel->private_data;
struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
struct musb *musb = hw_ep->musb;
unsigned long flags;
struct dma_tx_state txstate;
u32 transferred;
bool empty;
spin_lock_irqsave(&musb->lock, flags);
dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
&txstate);
transferred = cppi41_channel->prog_len - txstate.residue;
cppi41_channel->transferred += transferred;
dev_dbg(musb->controller, "DMA transfer done on hw_ep=%d bytes=%d/%d\n",
hw_ep->epnum, cppi41_channel->transferred,
cppi41_channel->total_len);
update_rx_toggle(cppi41_channel);
if (cppi41_channel->transferred == cppi41_channel->total_len ||
transferred < cppi41_channel->packet_sz)
cppi41_channel->prog_len = 0;
empty = musb_is_tx_fifo_empty(hw_ep);
if (empty) {
cppi41_trans_done(cppi41_channel);
} else {
struct cppi41_dma_controller *controller;
/*
* On AM335x it has been observed that the TX interrupt fires
* too early that means the TXFIFO is not yet empty but the DMA
* engine says that it is done with the transfer. We don't
* receive a FIFO empty interrupt so the only thing we can do is
* to poll for the bit. On HS it usually takes 2us, on FS around
* 110us - 150us depending on the transfer size.
* We spin on HS (no longer than than 25us and setup a timer on
* FS to check for the bit and complete the transfer.
*/
controller = cppi41_channel->controller;
if (musb->g.speed == USB_SPEED_HIGH) {
unsigned wait = 25;
do {
empty = musb_is_tx_fifo_empty(hw_ep);
if (empty)
break;
wait--;
if (!wait)
break;
udelay(1);
} while (1);
empty = musb_is_tx_fifo_empty(hw_ep);
if (empty) {
cppi41_trans_done(cppi41_channel);
goto out;
}
}
list_add_tail(&cppi41_channel->tx_check,
&controller->early_tx_list);
if (!hrtimer_active(&controller->early_tx)) {
hrtimer_start_range_ns(&controller->early_tx,
ktime_set(0, 140 * NSEC_PER_USEC),
40 * NSEC_PER_USEC,
HRTIMER_MODE_REL);
}
}
out:
spin_unlock_irqrestore(&musb->lock, flags);
}
@ -364,6 +472,8 @@ static int cppi41_is_compatible(struct dma_channel *channel, u16 maxpacket,
WARN_ON(1);
return 1;
}
if (cppi41_channel->hw_ep->ep_in.type != USB_ENDPOINT_XFER_BULK)
return 0;
if (cppi41_channel->is_tx)
return 1;
/* AM335x Advisory 1.0.13. No workaround for device RX mode */
@ -388,6 +498,7 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel)
if (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)
return 0;
list_del_init(&cppi41_channel->tx_check);
if (is_tx) {
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~MUSB_TXCSR_DMAENAB;
@ -495,6 +606,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
cppi41_channel->controller = controller;
cppi41_channel->port_num = port;
cppi41_channel->is_tx = is_tx;
INIT_LIST_HEAD(&cppi41_channel->tx_check);
musb_dma = &cppi41_channel->channel;
musb_dma->private_data = cppi41_channel;
@ -520,6 +632,7 @@ void dma_controller_destroy(struct dma_controller *c)
struct cppi41_dma_controller *controller = container_of(c,
struct cppi41_dma_controller, controller);
hrtimer_cancel(&controller->early_tx);
cppi41_dma_controller_stop(controller);
kfree(controller);
}
@ -539,6 +652,9 @@ struct dma_controller *dma_controller_create(struct musb *musb,
if (!controller)
goto kzalloc_fail;
hrtimer_init(&controller->early_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
controller->early_tx.function = cppi41_recheck_tx_req;
INIT_LIST_HEAD(&controller->early_tx_list);
controller->musb = musb;
controller->controller.channel_alloc = cppi41_dma_channel_allocate;

4
drivers/usb/musb/musb_gadget.c

@ -1796,7 +1796,11 @@ int musb_gadget_setup(struct musb *musb)
/* this "gadget" abstracts/virtualizes the controller */
musb->g.name = musb_driver_name;
#if IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE)
musb->g.is_otg = 1;
#elif IS_ENABLED(CONFIG_USB_MUSB_GADGET)
musb->g.is_otg = 0;
#endif
musb_g_init_endpoints(musb);

5
drivers/usb/phy/phy-am335x.c

@ -52,8 +52,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
return am_phy->id;
}
ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen,
USB_PHY_TYPE_USB2, 0, false);
ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
if (ret)
return ret;
@ -66,8 +65,6 @@ static int am335x_phy_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, am_phy);
return 0;
return ret;
}
static int am335x_phy_remove(struct platform_device *pdev)

68
drivers/usb/phy/phy-generic.c

@ -48,8 +48,9 @@ void usb_nop_xceiv_register(void)
if (pd)
return;
pd = platform_device_register_simple("usb_phy_gen_xceiv", -1, NULL, 0);
if (!pd) {
if (IS_ERR(pd)) {
pr_err("Unable to register generic usb transceiver\n");
pd = NULL;
return;
}
}
@ -150,10 +151,40 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
}
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
enum usb_phy_type type, u32 clk_rate, bool needs_vcc)
struct usb_phy_gen_xceiv_platform_data *pdata)
{
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err;
u32 clk_rate = 0;
bool needs_vcc = false;
nop->reset_active_low = true; /* default behaviour */
if (dev->of_node) {
struct device_node *node = dev->of_node;
enum of_gpio_flags flags = 0;
if (of_property_read_u32(node, "clock-frequency", &clk_rate))
clk_rate = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
0, &flags);
if (nop->gpio_reset == -EPROBE_DEFER)
return -EPROBE_DEFER;
nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
nop->gpio_reset = pdata->gpio_reset;
} else {
nop->gpio_reset = -1;
}
nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
GFP_KERNEL);
if (!nop->phy.otg)
@ -218,43 +249,14 @@ EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usb_phy_gen_xceiv_platform_data *pdata =
dev_get_platdata(&pdev->dev);
struct usb_phy_gen_xceiv *nop;
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err;
u32 clk_rate = 0;
bool needs_vcc = false;
nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
if (!nop)
return -ENOMEM;
nop->reset_active_low = true; /* default behaviour */
if (dev->of_node) {
struct device_node *node = dev->of_node;
enum of_gpio_flags flags;
if (of_property_read_u32(node, "clock-frequency", &clk_rate))
clk_rate = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
0, &flags);
if (nop->gpio_reset == -EPROBE_DEFER)
return -EPROBE_DEFER;
nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
nop->gpio_reset = pdata->gpio_reset;
}
err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc);
err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
if (err)
return err;
@ -271,8 +273,6 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, nop);
return 0;
return err;
}
static int usb_phy_gen_xceiv_remove(struct platform_device *pdev)

4
drivers/usb/phy/phy-generic.h

@ -1,6 +1,8 @@
#ifndef _PHY_GENERIC_H_
#define _PHY_GENERIC_H_
#include <linux/usb/usb_phy_gen_xceiv.h>
struct usb_phy_gen_xceiv {
struct usb_phy phy;
struct device *dev;
@ -14,6 +16,6 @@ int usb_gen_phy_init(struct usb_phy *phy);
void usb_gen_phy_shutdown(struct usb_phy *phy);
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
enum usb_phy_type type, u32 clk_rate, bool needs_vcc);
struct usb_phy_gen_xceiv_platform_data *pdata);
#endif

2
drivers/usb/phy/phy-mxs-usb.c

@ -164,7 +164,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
mxs_phy->clk = clk;
platform_set_drvdata(pdev, &mxs_phy->phy);
platform_set_drvdata(pdev, mxs_phy);
ret = usb_add_phy_dev(&mxs_phy->phy);
if (ret)

4
drivers/usb/phy/phy-rcar-gen2-usb.c

@ -107,10 +107,10 @@ static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv)
clk_prepare_enable(priv->clk);
/* Set USB channels in the USBHS UGCTRL2 register */
val = ioread32(priv->base);
val = ioread32(priv->base + USBHS_UGCTRL2_REG);
val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS);
val |= priv->ugctrl2;
iowrite32(val, priv->base);
iowrite32(val, priv->base + USBHS_UGCTRL2_REG);
}
/* Shutdown USB channels */

37
drivers/usb/serial/ftdi_sio.c

@ -2123,6 +2123,20 @@ static void ftdi_set_termios(struct tty_struct *tty,
termios->c_cflag |= CRTSCTS;
}
/*
* All FTDI UART chips are limited to CS7/8. We won't pretend to
* support CS5/6 and revert the CSIZE setting instead.
*/
if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) {
dev_warn(ddev, "requested CSIZE setting not supported\n");
termios->c_cflag &= ~CSIZE;
if (old_termios)
termios->c_cflag |= old_termios->c_cflag & CSIZE;
else
termios->c_cflag |= CS8;
}
cflag = termios->c_cflag;
if (!old_termios)
@ -2159,19 +2173,16 @@ no_skip:
} else {
urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
}
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
case CS7:
urb_value |= 7;
dev_dbg(ddev, "Setting CS7\n");
break;
case CS8:
urb_value |= 8;
dev_dbg(ddev, "Setting CS8\n");
break;
default:
dev_err(ddev, "CSIZE was set but not CS7-CS8\n");
}
switch (cflag & CSIZE) {
case CS7:
urb_value |= 7;
dev_dbg(ddev, "Setting CS7\n");
break;
default:
case CS8:
urb_value |= 8;
dev_dbg(ddev, "Setting CS8\n");
break;
}
/* This is needed by the break command since it uses the same command

12
drivers/usb/serial/generic.c

@ -173,16 +173,8 @@ retry:
clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
return result;
}
/*
* Try sending off another urb, unless called from completion handler
* (in which case there will be no free urb or no data).
*/
if (mem_flags != GFP_ATOMIC)
goto retry;
clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
return 0;
goto retry; /* try sending off another urb */
}
EXPORT_SYMBOL_GPL(usb_serial_generic_write_start);
@ -208,7 +200,7 @@ int usb_serial_generic_write(struct tty_struct *tty,
return 0;
count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
result = usb_serial_generic_write_start(port, GFP_KERNEL);
result = usb_serial_generic_write_start(port, GFP_ATOMIC);
if (result)
return result;

32
drivers/usb/serial/mos7840.c

@ -1813,25 +1813,25 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
iflag = tty->termios.c_iflag;
/* Change the number of bits */
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
case CS5:
lData = LCR_BITS_5;
break;
switch (cflag & CSIZE) {
case CS5:
lData = LCR_BITS_5;
break;
case CS6:
lData = LCR_BITS_6;
break;
case CS6:
lData = LCR_BITS_6;
break;
case CS7:
lData = LCR_BITS_7;
break;
default:
case CS8:
lData = LCR_BITS_8;
break;
}
case CS7:
lData = LCR_BITS_7;
break;
default:
case CS8:
lData = LCR_BITS_8;
break;
}
/* Change the Parity bit */
if (cflag & PARENB) {
if (cflag & PARODD) {

27
drivers/usb/serial/option.c

@ -85,6 +85,7 @@ static void option_instat_callback(struct urb *urb);
#define HUAWEI_PRODUCT_K4505 0x1464
#define HUAWEI_PRODUCT_K3765 0x1465
#define HUAWEI_PRODUCT_K4605 0x14C6
#define HUAWEI_PRODUCT_E173S6 0x1C07
#define QUANTA_VENDOR_ID 0x0408
#define QUANTA_PRODUCT_Q101 0xEA02
@ -572,6 +573,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S6, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) },
@ -634,6 +637,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x72) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x73) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x74) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) },
@ -688,6 +695,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x72) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x73) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x74) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) },
@ -742,6 +753,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6F) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x72) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x73) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x74) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7A) },
@ -796,6 +811,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6F) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x72) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x73) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x74) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7A) },
@ -850,6 +869,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6F) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x72) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x73) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x74) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7A) },
@ -904,6 +927,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6D) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6E) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6F) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x72) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x73) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x74) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x75) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x78) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x79) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7A) },

30
drivers/usb/serial/pl2303.c

@ -361,23 +361,21 @@ static void pl2303_set_termios(struct tty_struct *tty,
0, 0, buf, 7, 100);
dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf);
if (C_CSIZE(tty)) {
switch (C_CSIZE(tty)) {
case CS5:
buf[6] = 5;
break;
case CS6:
buf[6] = 6;
break;
case CS7:
buf[6] = 7;
break;
default:
case CS8:
buf[6] = 8;
}
dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
switch (C_CSIZE(tty)) {
case CS5:
buf[6] = 5;
break;
case CS6:
buf[6] = 6;
break;
case CS7:
buf[6] = 7;
break;
default:
case CS8:
buf[6] = 8;
}
dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
/* For reference buf[0]:buf[3] baud rate value */
pl2303_encode_baudrate(tty, port, &buf[0]);

30
drivers/usb/serial/spcp8x5.c

@ -348,22 +348,20 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
}
/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
case CS5:
buf[1] |= SET_UART_FORMAT_SIZE_5;
break;
case CS6:
buf[1] |= SET_UART_FORMAT_SIZE_6;
break;
case CS7:
buf[1] |= SET_UART_FORMAT_SIZE_7;
break;
default:
case CS8:
buf[1] |= SET_UART_FORMAT_SIZE_8;
break;
}
switch (cflag & CSIZE) {
case CS5:
buf[1] |= SET_UART_FORMAT_SIZE_5;
break;
case CS6:
buf[1] |= SET_UART_FORMAT_SIZE_6;
break;
case CS7:
buf[1] |= SET_UART_FORMAT_SIZE_7;
break;
default:
case CS8:
buf[1] |= SET_UART_FORMAT_SIZE_8;
break;
}
/* Set Stop bit2 : 0:1bit 1:2bit */

72
drivers/usb/wusbcore/devconnect.c

@ -97,18 +97,12 @@ static void wusbhc_devconnect_acked_work(struct work_struct *work);
static void wusb_dev_free(struct wusb_dev *wusb_dev)
{
if (wusb_dev) {
kfree(wusb_dev->set_gtk_req);
usb_free_urb(wusb_dev->set_gtk_urb);
kfree(wusb_dev);
}
kfree(wusb_dev);
}
static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc)
{
struct wusb_dev *wusb_dev;
struct urb *urb;
struct usb_ctrlrequest *req;
wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL);
if (wusb_dev == NULL)
@ -118,22 +112,6 @@ static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc)
INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (urb == NULL)
goto err;
wusb_dev->set_gtk_urb = urb;
req = kmalloc(sizeof(*req), GFP_KERNEL);
if (req == NULL)
goto err;
wusb_dev->set_gtk_req = req;
req->bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
req->bRequest = USB_REQ_SET_DESCRIPTOR;
req->wValue = cpu_to_le16(USB_DT_KEY << 8 | wusbhc->gtk_index);
req->wIndex = 0;
req->wLength = cpu_to_le16(wusbhc->gtk.descr.bLength);
return wusb_dev;
err:
wusb_dev_free(wusb_dev);
@ -411,9 +389,6 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
/*
* Refresh the list of keep alives to emit in the MMC
*
* Some devices don't respond to keep alives unless they've been
* authenticated, so skip unauthenticated devices.
*
* We only publish the first four devices that have a coming timeout
* condition. Then when we are done processing those, we go for the
* next ones. We ignore the ones that have timed out already (they'll
@ -448,7 +423,7 @@ static void __wusbhc_keep_alive(struct wusbhc *wusbhc)
if (wusb_dev == NULL)
continue;
if (wusb_dev->usb_dev == NULL || !wusb_dev->usb_dev->authenticated)
if (wusb_dev->usb_dev == NULL)
continue;
if (time_after(jiffies, wusb_dev->entry_ts + tt)) {
@ -524,11 +499,19 @@ static struct wusb_dev *wusbhc_find_dev_by_addr(struct wusbhc *wusbhc, u8 addr)
*
* @wusbhc shall be referenced and unlocked
*/
static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, u8 srcaddr)
{
struct wusb_dev *wusb_dev;
mutex_lock(&wusbhc->mutex);
wusb_dev->entry_ts = jiffies;
__wusbhc_keep_alive(wusbhc);
wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
if (wusb_dev == NULL) {
dev_dbg(wusbhc->dev, "ignoring DN_Alive from unconnected device %02x\n",
srcaddr);
} else {
wusb_dev->entry_ts = jiffies;
__wusbhc_keep_alive(wusbhc);
}
mutex_unlock(&wusbhc->mutex);
}
@ -582,14 +565,22 @@ static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc,
*
* @wusbhc shall be referenced and unlocked
*/
static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, u8 srcaddr)
{
struct device *dev = wusbhc->dev;
dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n", wusb_dev->addr);
struct wusb_dev *wusb_dev;
mutex_lock(&wusbhc->mutex);
__wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, wusb_dev->port_idx));
wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
if (wusb_dev == NULL) {
dev_dbg(dev, "ignoring DN DISCONNECT from unconnected device %02x\n",
srcaddr);
} else {
dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n",
wusb_dev->addr);
__wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc,
wusb_dev->port_idx));
}
mutex_unlock(&wusbhc->mutex);
}
@ -611,30 +602,21 @@ void wusbhc_handle_dn(struct wusbhc *wusbhc, u8 srcaddr,
struct wusb_dn_hdr *dn_hdr, size_t size)
{
struct device *dev = wusbhc->dev;
struct wusb_dev *wusb_dev;
if (size < sizeof(struct wusb_dn_hdr)) {
dev_err(dev, "DN data shorter than DN header (%d < %d)\n",
(int)size, (int)sizeof(struct wusb_dn_hdr));
return;
}
wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
if (wusb_dev == NULL && dn_hdr->bType != WUSB_DN_CONNECT) {
dev_dbg(dev, "ignoring DN %d from unconnected device %02x\n",
dn_hdr->bType, srcaddr);
return;
}
switch (dn_hdr->bType) {
case WUSB_DN_CONNECT:
wusbhc_handle_dn_connect(wusbhc, dn_hdr, size);
break;
case WUSB_DN_ALIVE:
wusbhc_handle_dn_alive(wusbhc, wusb_dev);
wusbhc_handle_dn_alive(wusbhc, srcaddr);