Browse Source

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
master
Linus Torvalds 9 years ago
parent
commit
a2013a13e6
  1. 2
      Documentation/ABI/testing/dev-kmsg
  2. 2
      Documentation/ABI/testing/sysfs-devices-power
  3. 2
      Documentation/ABI/testing/sysfs-driver-ppi
  4. 6
      Documentation/ABI/testing/sysfs-profiling
  5. 2
      Documentation/HOWTO
  6. 1
      Documentation/accounting/getdelays.c
  7. 4
      Documentation/dma-buf-sharing.txt
  8. 1
      Documentation/dontdiff
  9. 4
      Documentation/fault-injection/notifier-error-inject.txt
  10. 2
      Documentation/hid/uhid.txt
  11. 2
      Documentation/hwmon/pmbus
  12. 2
      Documentation/input/alps.txt
  13. 2
      Documentation/kbuild/modules.txt
  14. 13
      Documentation/kernel-doc-nano-HOWTO.txt
  15. 4
      Documentation/misc-devices/mei/mei-amt-version.c
  16. 2
      Documentation/video4linux/bttv/Cards
  17. 2
      Documentation/video4linux/bttv/Sound-FAQ
  18. 2
      Documentation/vm/frontswap.txt
  19. 2
      MAINTAINERS
  20. 4
      README
  21. 2
      arch/alpha/include/asm/mmzone.h
  22. 12
      arch/alpha/kernel/pci_iommu.c
  23. 2
      arch/arm/kernel/kprobes-test.c
  24. 2
      arch/arm/mach-netx/xc.c
  25. 2
      arch/arm/mach-s3c24xx/include/mach/bast-map.h
  26. 2
      arch/arm/mach-s3c24xx/include/mach/dma.h
  27. 2
      arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
  28. 2
      arch/arm/mach-s3c24xx/pm.c
  29. 2
      arch/arm/mach-tegra/Kconfig
  30. 2
      arch/arm/plat-s3c24xx/dma.c
  31. 2
      arch/blackfin/mach-bf609/Kconfig
  32. 2
      arch/blackfin/mm/sram-alloc.c
  33. 2
      arch/cris/include/arch-v10/arch/irq.h
  34. 2
      arch/cris/include/arch-v32/arch/irq.h
  35. 2
      arch/frv/mm/pgalloc.c
  36. 2
      arch/ia64/kvm/kvm-ia64.c
  37. 2
      arch/m68k/math-emu/fp_log.c
  38. 2
      arch/mips/txx9/generic/pci.c
  39. 2
      arch/mn10300/mm/pgtable.c
  40. 2
      arch/openrisc/Kconfig
  41. 2
      arch/powerpc/include/asm/oprofile_impl.h
  42. 2
      arch/powerpc/include/asm/pte-hash64-64k.h
  43. 4
      arch/powerpc/include/asm/smu.h
  44. 2
      arch/powerpc/kernel/legacy_serial.c
  45. 2
      arch/powerpc/kernel/of_platform.c
  46. 2
      arch/powerpc/kernel/signal_64.c
  47. 2
      arch/powerpc/mm/slice.c
  48. 2
      arch/powerpc/platforms/52xx/mpc52xx_gpt.c
  49. 2
      arch/powerpc/platforms/cell/iommu.c
  50. 6
      arch/powerpc/platforms/cell/spider-pic.c
  51. 2
      arch/powerpc/platforms/powermac/pic.c
  52. 2
      arch/sh/boards/board-espt.c
  53. 1
      arch/x86/boot/.gitignore
  54. 2
      arch/x86/kernel/cpu/mtrr/main.c
  55. 2
      arch/x86/mm/pgtable.c
  56. 2
      drivers/acpi/acpica/dsopcode.c
  57. 2
      drivers/char/ipmi/ipmi_msghandler.c
  58. 2
      drivers/char/ipmi/ipmi_si_intf.c
  59. 6
      drivers/char/ppdev.c
  60. 4
      drivers/eisa/eisa.ids
  61. 4
      drivers/firewire/init_ohci1394_dma.c
  62. 2
      drivers/firewire/ohci.c
  63. 2
      drivers/gpio/Kconfig
  64. 2
      drivers/gpu/drm/radeon/evergreen.c
  65. 4
      drivers/gpu/drm/radeon/ni.c
  66. 4
      drivers/gpu/drm/radeon/radeon_ring.c
  67. 6
      drivers/gpu/drm/radeon/si.c
  68. 2
      drivers/i2c/busses/i2c-nuc900.c
  69. 4
      drivers/i2c/busses/i2c-s3c2410.c
  70. 2
      drivers/isdn/hisax/amd7930_fn.c
  71. 2
      drivers/isdn/hisax/isar.c
  72. 2
      drivers/md/md.c
  73. 4
      drivers/md/persistent-data/dm-block-manager.c
  74. 2
      drivers/md/persistent-data/dm-btree.h
  75. 2
      drivers/md/raid5.c
  76. 2
      drivers/media/dvb-frontends/drxk_hard.c
  77. 2
      drivers/media/platform/mx2_emmaprp.c
  78. 12
      drivers/message/i2o/README.ioctl
  79. 2
      drivers/message/i2o/i2o_block.c
  80. 2
      drivers/message/i2o/i2o_config.c
  81. 2
      drivers/mmc/host/Kconfig
  82. 2
      drivers/mtd/maps/plat-ram.c
  83. 2
      drivers/mtd/nand/s3c2410.c
  84. 2
      drivers/net/bonding/bonding.h
  85. 2
      drivers/net/ethernet/8390/ax88796.c
  86. 2
      drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
  87. 2
      drivers/net/ethernet/intel/e1000/e1000_ethtool.c
  88. 2
      drivers/net/ethernet/mellanox/mlx4/eq.c
  89. 2
      drivers/net/ethernet/micrel/ksz884x.c
  90. 2
      drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
  91. 8
      drivers/net/sungem_phy.c
  92. 1
      drivers/net/wimax/i2400m/debugfs.c
  93. 2
      drivers/net/wireless/atmel.c
  94. 2
      drivers/net/wireless/ipw2x00/ipw2100.h
  95. 2
      drivers/net/wireless/zd1211rw/zd_chip.c
  96. 2
      drivers/regulator/palmas-regulator.c
  97. 4
      drivers/remoteproc/remoteproc_elf_loader.c
  98. 2
      drivers/rtc/rtc-isl1208.c
  99. 2
      drivers/rtc/rtc-s3c.c
  100. 2
      drivers/s390/block/dasd_devmap.c

2
Documentation/ABI/testing/dev-kmsg

@ -92,7 +92,7 @@ Description: The /dev/kmsg character device node provides userspace access
The flags field carries '-' by default. A 'c' indicates a
fragment of a line. All following fragments are flagged with
'+'. Note, that these hints about continuation lines are not
neccessarily correct, and the stream could be interleaved with
necessarily correct, and the stream could be interleaved with
unrelated messages, but merging the lines in the output
usually produces better human readable results. A similar
logic is used internally when messages are printed to the

2
Documentation/ABI/testing/sysfs-devices-power

@ -164,7 +164,7 @@ Contact: Rafael J. Wysocki <rjw@sisk.pl>
Description:
The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
contains the total time the device has been preventing
opportunistic transitions to sleep states from occuring.
opportunistic transitions to sleep states from occurring.
This attribute is read-only. If the device is not enabled to
wake up the system from sleep states, this attribute is not
present.

2
Documentation/ABI/testing/sysfs-driver-ppi

@ -5,7 +5,7 @@ Contact: xiaoyan.zhang@intel.com
Description:
This folder includes the attributes related with PPI (Physical
Presence Interface). Only if TPM is supported by BIOS, this
folder makes sence. The folder path can be got by command
folder makes sense. The folder path can be got by command
'find /sys/ -name 'pcrs''. For the detail information of PPI,
please refer to the PPI specification from
http://www.trustedcomputinggroup.org/

6
Documentation/ABI/testing/sysfs-profiling

@ -1,13 +1,13 @@
What: /sys/kernel/profile
What: /sys/kernel/profiling
Date: September 2008
Contact: Dave Hansen <dave@linux.vnet.ibm.com>
Description:
/sys/kernel/profile is the runtime equivalent
/sys/kernel/profiling is the runtime equivalent
of the boot-time profile= option.
You can get the same effect running:
echo 2 > /sys/kernel/profile
echo 2 > /sys/kernel/profiling
as you would by issuing profile=2 on the boot
command line.

2
Documentation/HOWTO

@ -462,7 +462,7 @@ Differences between the kernel community and corporate structures
The kernel community works differently than most traditional corporate
development environments. Here are a list of things that you can try to
do to try to avoid problems:
do to avoid problems:
Good things to say regarding your proposed changes:
- "This solves multiple problems."
- "This deletes 2000 lines of code."

1
Documentation/accounting/getdelays.c

@ -51,7 +51,6 @@ int dbg;
int print_delays;
int print_io_accounting;
int print_task_context_switch_counts;
__u64 stime, utime;
#define PRINTF(fmt, arg...) { \
if (dbg) { \

4
Documentation/dma-buf-sharing.txt

@ -376,7 +376,7 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases:
leaving the cpu domain and flushing caches at fault time. Note that all the
dma_buf files share the same anon inode, hence the exporter needs to replace
the dma_buf file stored in vma->vm_file with it's own if pte shootdown is
requred. This is because the kernel uses the underlying inode's address_space
required. This is because the kernel uses the underlying inode's address_space
for vma tracking (and hence pte tracking at shootdown time with
unmap_mapping_range).
@ -388,7 +388,7 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases:
Exporters that shoot down mappings (for any reasons) shall not do any
synchronization at fault time with outstanding device operations.
Synchronization is an orthogonal issue to sharing the backing storage of a
buffer and hence should not be handled by dma-buf itself. This is explictly
buffer and hence should not be handled by dma-buf itself. This is explicitly
mentioned here because many people seem to want something like this, but if
different exporters handle this differently, buffer sharing can fail in
interesting ways depending upong the exporter (if userspace starts depending

1
Documentation/dontdiff

@ -181,7 +181,6 @@ modversions.h*
nconf
ncscope.*
offset.h
offsets.h
oui.c*
page-types
parse.c

4
Documentation/fault-injection/notifier-error-inject.txt

@ -1,7 +1,7 @@
Notifier error injection
========================
Notifier error injection provides the ability to inject artifical errors to
Notifier error injection provides the ability to inject artificial errors to
specified notifier chain callbacks. It is useful to test the error handling of
notifier call chain failures which is rarely executed. There are kernel
modules that can be used to test the following notifiers.
@ -14,7 +14,7 @@ modules that can be used to test the following notifiers.
CPU notifier error injection module
-----------------------------------
This feature can be used to test the error handling of the CPU notifiers by
injecting artifical errors to CPU notifier chain callbacks.
injecting artificial errors to CPU notifier chain callbacks.
If the notifier call chain should be failed with some events notified, write
the error code to debugfs interface

2
Documentation/hid/uhid.txt

@ -108,7 +108,7 @@ the request was handled successfully.
UHID_FEATURE_ANSWER:
If you receive a UHID_FEATURE request you must answer with this request. You
must copy the "id" field from the request into the answer. Set the "err" field
to 0 if no error occured or to EIO if an I/O error occurred.
to 0 if no error occurred or to EIO if an I/O error occurred.
If "err" is 0 then you should fill the buffer of the answer with the results
of the feature request and set "size" correspondingly.

2
Documentation/hwmon/pmbus

@ -138,7 +138,7 @@ Sysfs entries
When probing the chip, the driver identifies which PMBus registers are
supported, and determines available sensors from this information.
Attribute files only exist if respective sensors are suported by the chip.
Attribute files only exist if respective sensors are supported by the chip.
Labels are provided to inform the user about the sensor associated with
a given sysfs entry.

2
Documentation/input/alps.txt

@ -133,7 +133,7 @@ number of contacts (f1 and f0 in the table below).
This packet only appears after a position packet with the mt bit set, and
usually only appears when there are two or more contacts (although
occassionally it's seen with only a single contact).
occasionally it's seen with only a single contact).
The final v3 packet type is the trackstick packet.

2
Documentation/kbuild/modules.txt

@ -470,7 +470,7 @@ build.
Sometimes, an external module uses exported symbols from
another external module. kbuild needs to have full knowledge of
all symbols to avoid spitting out warnings about undefined
all symbols to avoid spliitting out warnings about undefined
symbols. Three solutions exist for this situation.
NOTE: The method with a top-level kbuild file is recommended

13
Documentation/kernel-doc-nano-HOWTO.txt

@ -64,6 +64,8 @@ Example kernel-doc function comment:
* comment lines.
*
* The longer description can have multiple paragraphs.
*
* Return: Describe the return value of foobar.
*/
The short description following the subject can span multiple lines
@ -78,6 +80,8 @@ If a function parameter is "..." (varargs), it should be listed in
kernel-doc notation as:
* @...: description
The return value, if any, should be described in a dedicated section
named "Return".
Example kernel-doc data structure comment.
@ -222,6 +226,9 @@ only a "*").
"section header:" names must be unique per function (or struct,
union, typedef, enum).
Use the section header "Return" for sections describing the return value
of a function.
Avoid putting a spurious blank line after the function name, or else the
description will be repeated!
@ -237,21 +244,21 @@ patterns, which are highlighted appropriately.
NOTE 1: The multi-line descriptive text you provide does *not* recognize
line breaks, so if you try to format some text nicely, as in:
Return codes
Return:
0 - cool
1 - invalid arg
2 - out of memory
this will all run together and produce:
Return codes 0 - cool 1 - invalid arg 2 - out of memory
Return: 0 - cool 1 - invalid arg 2 - out of memory
NOTE 2: If the descriptive text you provide has lines that begin with
some phrase followed by a colon, each of those phrases will be taken as
a new section heading, which means you should similarly try to avoid text
like:
Return codes:
Return:
0: cool
1: invalid arg
2: out of memory

4
Documentation/misc-devices/mei/mei-amt-version.c

@ -214,7 +214,7 @@ out:
}
/***************************************************************************
* Intel Advanced Management Technolgy ME Client
* Intel Advanced Management Technology ME Client
***************************************************************************/
#define AMT_MAJOR_VERSION 1
@ -256,7 +256,7 @@ struct amt_code_versions {
} __attribute__((packed));
/***************************************************************************
* Intel Advanced Management Technolgy Host Interface
* Intel Advanced Management Technology Host Interface
***************************************************************************/
struct amt_host_if_msg_header {

2
Documentation/video4linux/bttv/Cards

@ -43,7 +43,7 @@ Very nice card if you only have satellite TV but several tuners connected
to the card via composite.
Many thanks to Matrix-Vision for giving us 2 cards for free which made
Bt848a/Bt849 single crytal operation support possible!!!
Bt848a/Bt849 single crystal operation support possible!!!

2
Documentation/video4linux/bttv/Sound-FAQ

@ -82,7 +82,7 @@ card installed, you might to check out if you can read these registers
values used by the windows driver. A tool to do this is available
from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it
does'nt work with bt878 boards according to some reports I received.
Another one with bt878 suport is available from
Another one with bt878 support is available from
http://btwincap.sourceforge.net/Files/btspy2.00.zip
You might also dig around in the *.ini files of the Windows applications.

2
Documentation/vm/frontswap.txt

@ -193,7 +193,7 @@ faster.
or maybe swap-over-nbd/NFS)?
No. First, the existing swap subsystem doesn't allow for any kind of
swap hierarchy. Perhaps it could be rewritten to accomodate a hierarchy,
swap hierarchy. Perhaps it could be rewritten to accommodate a hierarchy,
but this would require fairly drastic changes. Even if it were
rewritten, the existing swap subsystem uses the block I/O layer which
assumes a swap device is fixed size and any page in it is linearly

2
MAINTAINERS

@ -3596,7 +3596,7 @@ S: Maintained
F: drivers/input/touchscreen/htcpen.c
HUGETLB FILESYSTEM
M: William Irwin <wli@holomorphy.com>
M: Nadia Yvette Chambers <nyc@holomorphy.com>
S: Maintained
F: fs/hugetlbfs/

4
README

@ -180,6 +180,10 @@ CONFIGURING the kernel:
with questions already answered.
Additionally updates the dependencies.
"make olddefconfig"
Like above, but sets new symbols to their default
values without prompting.
"make defconfig" Create a ./.config file by using the default
symbol values from either arch/$ARCH/defconfig
or arch/$ARCH/configs/${PLATFORM}_defconfig,

2
arch/alpha/include/asm/mmzone.h

@ -66,7 +66,7 @@ PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
((unsigned long)__va(NODE_DATA(kvaddr_to_nid(kaddr))->node_start_pfn \
<< PAGE_SHIFT))
/* XXX: FIXME -- wli */
/* XXX: FIXME -- nyc */
#define kern_addr_valid(kaddr) (0)
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)

12
arch/alpha/kernel/pci_iommu.c

@ -354,8 +354,7 @@ static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
struct pci_dev *pdev = alpha_gendev_to_pci(dev);
int dac_allowed;
if (dir == PCI_DMA_NONE)
BUG();
BUG_ON(dir == PCI_DMA_NONE);
dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
return pci_map_single_1(pdev, (char *)page_address(page) + offset,
@ -378,8 +377,7 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
struct pci_iommu_arena *arena;
long dma_ofs, npages;
if (dir == PCI_DMA_NONE)
BUG();
BUG_ON(dir == PCI_DMA_NONE);
if (dma_addr >= __direct_map_base
&& dma_addr < __direct_map_base + __direct_map_size) {
@ -662,8 +660,7 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
dma_addr_t max_dma;
int dac_allowed;
if (dir == PCI_DMA_NONE)
BUG();
BUG_ON(dir == PCI_DMA_NONE);
dac_allowed = dev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
@ -742,8 +739,7 @@ static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
dma_addr_t max_dma;
dma_addr_t fbeg, fend;
if (dir == PCI_DMA_NONE)
BUG();
BUG_ON(dir == PCI_DMA_NONE);
if (! alpha_mv.mv_pci_tbi)
return;

2
arch/arm/kernel/kprobes-test.c

@ -1598,7 +1598,7 @@ static int __init run_all_tests(void)
{
int ret = 0;
pr_info("Begining kprobe tests...\n");
pr_info("Beginning kprobe tests...\n");
#ifndef CONFIG_THUMB2_KERNEL

2
arch/arm/mach-netx/xc.c

@ -136,7 +136,7 @@ int xc_request_firmware(struct xc *x)
if (head->magic != 0x4e657458) {
if (head->magic == 0x5874654e) {
dev_err(x->dev,
"firmware magic is 'XteN'. Endianess problems?\n");
"firmware magic is 'XteN'. Endianness problems?\n");
ret = -ENODEV;
goto exit_release_firmware;
}

2
arch/arm/mach-s3c24xx/include/mach/bast-map.h

@ -74,7 +74,7 @@
/* 0xE0000000 contains the IO space that is split by speed and
* wether the access is for 8 or 16bit IO... this ensures that
* whether the access is for 8 or 16bit IO... this ensures that
* the correct access is made
*
* 0x10000000 of space, partitioned as so:

2
arch/arm/mach-s3c24xx/include/mach/dma.h

@ -88,7 +88,7 @@ enum s3c2410_dma_state {
*
* This represents the state of the DMA engine, wrt to the loaded / running
* transfers. Since we don't have any way of knowing exactly the state of
* the DMA transfers, we need to know the state to make decisions on wether
* the DMA transfers, we need to know the state to make decisions on whether
* we can
*
* S3C2410_DMA_NONE

2
arch/arm/mach-s3c24xx/include/mach/vr1000-map.h

@ -51,7 +51,7 @@
#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
/* 0xE0000000 contains the IO space that is split by speed and
* wether the access is for 8 or 16bit IO... this ensures that
* whether the access is for 8 or 16bit IO... this ensures that
* the correct access is made
*
* 0x10000000 of space, partitioned as so:

2
arch/arm/mach-s3c24xx/pm.c

@ -121,7 +121,7 @@ void s3c_pm_configure_extint(void)
int pin;
/* for each of the external interrupts (EINT0..EINT15) we
* need to check wether it is an external interrupt source,
* need to check whether it is an external interrupt source,
* and then configure it as an input if it is not
*/

2
arch/arm/mach-tegra/Kconfig

@ -55,7 +55,7 @@ config TEGRA_AHB
help
Adds AHB configuration functionality for NVIDIA Tegra SoCs,
which controls AHB bus master arbitration and some
perfomance parameters(priority, prefech size).
performance parameters(priority, prefech size).
config TEGRA_EMC_SCALING_ENABLE
bool "Enable scaling the memory frequency"

2
arch/arm/plat-s3c24xx/dma.c

@ -325,7 +325,7 @@ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
chan->state = S3C2410_DMA_RUNNING;
/* check wether there is anything to load, and if not, see
/* check whether there is anything to load, and if not, see
* if we can find anything to load
*/

2
arch/blackfin/mach-bf609/Kconfig

@ -56,7 +56,7 @@ config SEC_IRQ_PRIORITY_LEVELS
default 7
range 0 7
help
Devide the total number of interrupt priority levels into sub-levels.
Divide the total number of interrupt priority levels into sub-levels.
There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels.
endmenu

2
arch/blackfin/mm/sram-alloc.c

@ -191,7 +191,7 @@ static irqreturn_t l2_ecc_err(int irq, void *dev_id)
{
int status;
printk(KERN_ERR "L2 ecc error happend\n");
printk(KERN_ERR "L2 ecc error happened\n");
status = bfin_read32(L2CTL0_STAT);
if (status & 0x1)
printk(KERN_ERR "Core channel error type:0x%x, addr:0x%x\n",

2
arch/cris/include/arch-v10/arch/irq.h

@ -142,7 +142,7 @@ __asm__ ( \
* it here, we would not get the multiple_irq at all.
*
* The non-blocking here is based on the knowledge that the timer interrupt is
* registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not
* registered as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not
* be an sti() before the timer irq handler is run to acknowledge the interrupt.
*/

2
arch/cris/include/arch-v32/arch/irq.h

@ -103,7 +103,7 @@ __asm__ ( \
* if we had BLOCK'edit here, we would not get the multiple_irq at all.
*
* The non-blocking here is based on the knowledge that the timer interrupt is
* registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not
* registered as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not
* be an sti() before the timer irq handler is run to acknowledge the interrupt.
*/
#define BUILD_TIMER_IRQ(nr, mask) \

2
arch/frv/mm/pgalloc.c

@ -77,7 +77,7 @@ void __set_pmd(pmd_t *pmdptr, unsigned long pmd)
* checks at dup_mmap(), exec(), and other mmlist addition points
* could be used. The locking scheme was chosen on the basis of
* manfred's recommendations and having no core impact whatsoever.
* -- wli
* -- nyc
*/
DEFINE_SPINLOCK(pgd_lock);
struct page *pgd_list;

2
arch/ia64/kvm/kvm-ia64.c

@ -1,5 +1,5 @@
/*
* kvm_ia64.c: Basic KVM suppport On Itanium series processors
* kvm_ia64.c: Basic KVM support On Itanium series processors
*
*
* Copyright (C) 2007, Intel Corporation.

2
arch/m68k/math-emu/fp_log.c

@ -50,7 +50,7 @@ fp_fsqrt(struct fp_ext *dest, struct fp_ext *src)
* sqrt(m*2^e) =
* sqrt(2*m) * 2^(p) , if e = 2*p + 1
*
* So we use the last bit of the exponent to decide wether to
* So we use the last bit of the exponent to decide whether to
* use the m or 2*m.
*
* Since only the fractional part of the mantissa is stored and

2
arch/mips/txx9/generic/pci.c

@ -341,7 +341,7 @@ static void __devinit quirk_slc90e66_ide(struct pci_dev *dev)
static void __devinit tc35815_fixup(struct pci_dev *dev)
{
/* This device may have PM registers but not they are not suported. */
/* This device may have PM registers but not they are not supported. */
if (dev->pm_cap) {
dev_info(&dev->dev, "PM disabled\n");
dev->pm_cap = 0;

2
arch/mn10300/mm/pgtable.c

@ -95,7 +95,7 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
* checks at dup_mmap(), exec(), and other mmlist addition points
* could be used. The locking scheme was chosen on the basis of
* manfred's recommendations and having no core impact whatsoever.
* -- wli
* -- nyc
*/
DEFINE_SPINLOCK(pgd_lock);
struct page *pgd_list;

2
arch/openrisc/Kconfig

@ -146,7 +146,7 @@ config DEBUG_STACKOVERFLOW
help
Make extra checks for space available on stack in some
critical functions. This will cause kernel to run a bit slower,
but will catch most of kernel stack overruns and exit gracefuly.
but will catch most of kernel stack overruns and exit gracefully.
Say Y if you are unsure.

2
arch/powerpc/include/asm/oprofile_impl.h

@ -34,7 +34,7 @@ struct op_system_config {
unsigned long mmcra;
#ifdef CONFIG_OPROFILE_CELL
/* Register for oprofile user tool to check cell kernel profiling
* suport.
* support.
*/
unsigned long cell_support;
#endif

2
arch/powerpc/include/asm/pte-hash64-64k.h

@ -23,7 +23,7 @@
/* Note the full page bits must be in the same location as for normal
* 4k pages as the same assembly will be used to insert 64K pages
* wether the kernel has CONFIG_PPC_64K_PAGES or not
* whether the kernel has CONFIG_PPC_64K_PAGES or not
*/
#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */
#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */

4
arch/powerpc/include/asm/smu.h

@ -132,7 +132,7 @@
*
* At this point, the OF driver seems to have a limitation on transfer
* sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
* wether this is just an OF limit due to some temporary buffer size
* whether this is just an OF limit due to some temporary buffer size
* or if this is an SMU imposed limit. This driver has the same limitation
* for now as I use a 0x10 bytes temporary buffer as well
*
@ -236,7 +236,7 @@
* 3 (optional): enable nmi? [0x00 or 0x01]
*
* Returns:
* If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
* If parameter 2 is 0x00 and parameter 3 is not specified, returns whether
* NMI is enabled. Otherwise unknown.
*/
#define SMU_CMD_MISC_df_NMI_OPTION 0x04

2
arch/powerpc/kernel/legacy_serial.c

@ -387,7 +387,7 @@ void __init find_legacy_serial_ports(void)
of_node_put(parent);
continue;
}
/* Check for known pciclass, and also check wether we have
/* Check for known pciclass, and also check whether we have
* a device with child nodes for ports or not
*/
if (of_device_is_compatible(np, "pciclass,0700") ||

2
arch/powerpc/kernel/of_platform.c

@ -82,7 +82,7 @@ static int __devinit of_pci_phb_probe(struct platform_device *dev)
return -ENXIO;
/* Claim resources. This might need some rework as well depending
* wether we are doing probe-only or not, like assigning unassigned
* whether we are doing probe-only or not, like assigning unassigned
* resources etc...
*/
pcibios_claim_one_bus(phb->bus);

2
arch/powerpc/kernel/signal_64.c

@ -83,7 +83,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
* the context). This is very important because we must ensure we
* don't lose the VRSAVE content that may have been set prior to
* the process doing its first vector operation
* Userland shall check AT_HWCAP to know wether it can rely on the
* Userland shall check AT_HWCAP to know whether it can rely on the
* v_regs pointer or not
*/
#ifdef CONFIG_ALTIVEC

2
arch/powerpc/mm/slice.c

@ -722,7 +722,7 @@ void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
}
/*
* is_hugepage_only_range() is used by generic code to verify wether
* is_hugepage_only_range() is used by generic code to verify whether
* a normal mmap mapping (non hugetlbfs) is valid on a given area.
*
* until the generic code provides a more generic hook and/or starts

2
arch/powerpc/platforms/52xx/mpc52xx_gpt.c

@ -526,7 +526,7 @@ EXPORT_SYMBOL(mpc52xx_gpt_timer_period);
#define WDT_IDENTITY "mpc52xx watchdog on GPT0"
/* wdt_is_active stores wether or not the /dev/watchdog device is opened */
/* wdt_is_active stores whether or not the /dev/watchdog device is opened */
static unsigned long wdt_is_active;
/* wdt-capable gpt */

2
arch/powerpc/platforms/cell/iommu.c

@ -728,7 +728,7 @@ static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np)
nid, np->full_name);
/* XXX todo: If we can have multiple windows on the same IOMMU, which
* isn't the case today, we probably want here to check wether the
* isn't the case today, we probably want here to check whether the
* iommu for that node is already setup.
* However, there might be issue with getting the size right so let's
* ignore that for now. We might want to completely get rid of the

6
arch/powerpc/platforms/cell/spider-pic.c

@ -148,7 +148,7 @@ static int spider_set_irq_type(struct irq_data *d, unsigned int type)
/* Configure the source. One gross hack that was there before and
* that I've kept around is the priority to the BE which I set to
* be the same as the interrupt source number. I don't know wether
* be the same as the interrupt source number. I don't know whether
* that's supposed to make any kind of sense however, we'll have to
* decide that, but for now, I'm not changing the behaviour.
*/
@ -220,7 +220,7 @@ static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc)
/* For hooking up the cascace we have a problem. Our device-tree is
* crap and we don't know on which BE iic interrupt we are hooked on at
* least not the "standard" way. We can reconstitute it based on two
* informations though: which BE node we are connected to and wether
* informations though: which BE node we are connected to and whether
* we are connected to IOIF0 or IOIF1. Right now, we really only care
* about the IBM cell blade and we know that its firmware gives us an
* interrupt-map property which is pretty strange.
@ -232,7 +232,7 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
int imaplen, intsize, unit;
struct device_node *iic;
/* First, we check wether we have a real "interrupts" in the device
/* First, we check whether we have a real "interrupts" in the device
* tree in case the device-tree is ever fixed
*/
struct of_irq oirq;

2
arch/powerpc/platforms/powermac/pic.c

@ -529,7 +529,7 @@ static int __init pmac_pic_probe_mpic(void)
void __init pmac_pic_init(void)
{
/* We configure the OF parsing based on our oldworld vs. newworld
* platform type and wether we were booted by BootX.
* platform type and whether we were booted by BootX.
*/
#ifdef CONFIG_PPC32
if (!pmac_newworld)

2
arch/sh/boards/board-espt.c

@ -1,5 +1,5 @@
/*
* Data Technology Inc. ESPT-GIGA board suport
* Data Technology Inc. ESPT-GIGA board support
*
* Copyright (C) 2008, 2009 Renesas Solutions Corp.
* Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>

1
arch/x86/boot/.gitignore

@ -2,7 +2,6 @@ bootsect
bzImage
cpustr.h
mkcpustr
offsets.h
voffset.h
zoffset.h
setup

2
arch/x86/kernel/cpu/mtrr/main.c

@ -606,7 +606,7 @@ void __init mtrr_bp_init(void)
/*
* This is an AMD specific MSR, but we assume(hope?) that
* Intel will implement it to when they extend the address
* Intel will implement it too when they extend the address
* bus of the Xeon.
*/
if (cpuid_eax(0x80000000) >= 0x80000008) {

2
arch/x86/mm/pgtable.c

@ -137,7 +137,7 @@ static void pgd_dtor(pgd_t *pgd)
* against pageattr.c; it is the unique case in which a valid change
* of kernel pagetables can't be lazily synchronized by vmalloc faults.
* vmalloc faults work because attached pagetables are never freed.
* -- wli
* -- nyc
*/
#ifdef CONFIG_X86_PAE

2
drivers/acpi/acpica/dsopcode.c

@ -1,6 +1,6 @@
/******************************************************************************
*
* Module Name: dsopcode - Dispatcher suport for regions and fields
* Module Name: dsopcode - Dispatcher support for regions and fields
*
*****************************************************************************/

2
drivers/char/ipmi/ipmi_msghandler.c

@ -3789,7 +3789,7 @@ static int handle_one_recv_msg(ipmi_smi_t intf,
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
&& (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) {
/* It's an asyncronous event. */
/* It's an asynchronous event. */
requeue = handle_read_event_rsp(intf, msg);
} else {
/* It's a response from the local BMC. */

2
drivers/char/ipmi/ipmi_si_intf.c

@ -155,7 +155,7 @@ enum si_stat_indexes {
/* Number of watchdog pretimeouts. */
SI_STAT_watchdog_pretimeouts,
/* Number of asyncronous messages received. */
/* Number of asynchronous messages received. */
SI_STAT_incoming_messages,

6
drivers/char/ppdev.c

@ -251,12 +251,8 @@ static ssize_t pp_write (struct file * file, const char __user * buf,
break;
}
if (signal_pending (current)) {
if (!bytes_written) {
bytes_written = -EINTR;
}
if (signal_pending (current))
break;
}
cond_resched();
}

4
drivers/eisa/eisa.ids

@ -985,8 +985,8 @@ ISABD00 "Racal-Interlan NP600A Ethernet 16bit"
ISABD02 "Racal-Interlan NI5210/8 Ethernet"
ISABD03 "Racal-Interlan NI5210/16 Ethernet"
ISABE00 "Qua Tech PXB-1608 Parallel Expansion Board"
ISABE01 "Qua Tech ES-100 8 Channel Asyncronous"
ISABE02 "Qua Tech QS-100M 4 Channel Asyncronous"
ISABE01 "Qua Tech ES-100 8 Channel Asynchronous"
ISABE02 "Qua Tech QS-100M 4 Channel Asynchronous"
ISABE03 "Qua Tech MXI-100 IEEE 488 GPIB"
ISABE04 "Qua Tech DS-201 Dual Channel RS-422"
ISABE05 "Qua Tech PXB-721 Parallel Expansion"

4
drivers/firewire/init_ohci1394_dma.c

@ -149,10 +149,10 @@ static inline void __init init_ohci1394_initialize(struct ohci *ohci)
reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
/* Accept asyncronous transfer requests from all nodes for now */
/* Accept asynchronous transfer requests from all nodes for now */
reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
/* Specify asyncronous transfer retries */
/* Specify asynchronous transfer retries */
reg_write(ohci, OHCI1394_ATRetries,
OHCI1394_MAX_AT_REQ_RETRIES |
(OHCI1394_MAX_AT_RESP_RETRIES<<4) |

2
drivers/firewire/ohci.c

@ -1281,7 +1281,7 @@ static int at_context_queue_packet(struct context *ctx,
d[0].res_count = cpu_to_le16(packet->timestamp);
/*
* The DMA format for asyncronous link packets is different
* The DMA format for asynchronous link packets is different
* from the IEEE1394 layout, so shift the fields around
* accordingly.
*/

2
drivers/gpio/Kconfig

@ -504,7 +504,7 @@ config GPIO_ADNP
help
This option enables support for N GPIOs found on Avionic Design
I2C GPIO expanders. The register space will be extended by powers
of two, so the controller will need to accomodate for that. For
of two, so the controller will need to accommodate for that. For
example: if a controller provides 48 pins, 6 registers will be
enough to represent all pins, but the driver will assume a
register layout for 64 pins (8 registers).

2
drivers/gpu/drm/radeon/evergreen.c

@ -1650,7 +1650,7 @@ static int evergreen_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB_WPTR, ring->wptr);
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
WREG32(CP_RB_RPTR_ADDR,
((rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC));
WREG32(CP_RB_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);

4
drivers/gpu/drm/radeon/ni.c

@ -1059,7 +1059,7 @@ static int cayman_cp_resume(struct radeon_device *rdev)
WREG32(CP_DEBUG, (1 << 27));
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
WREG32(SCRATCH_ADDR, ((rdev->wb.gpu_addr + RADEON_WB_SCRATCH_OFFSET) >> 8) & 0xFFFFFFFF);
WREG32(SCRATCH_UMSK, 0xff);
@ -1076,7 +1076,7 @@ static int cayman_cp_resume(struct radeon_device *rdev)
#endif
WREG32(cp_rb_cntl[i], rb_cntl);
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
addr = rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET;
WREG32(cp_rb_rptr_addr[i], addr & 0xFFFFFFFC);
WREG32(cp_rb_rptr_addr_hi[i], upper_32_bits(addr) & 0xFF);

4
drivers/gpu/drm/radeon/radeon_ring.c

@ -459,7 +459,7 @@ void radeon_ring_unlock_commit(struct radeon_device *rdev, struct radeon_ring *r
*
* @ring: radeon_ring structure holding ring information
*
* Reset the driver's copy of the wtpr (all asics).
* Reset the driver's copy of the wptr (all asics).
*/
void radeon_ring_undo(struct radeon_ring *ring)
{
@ -503,7 +503,7 @@ void radeon_ring_force_activity(struct radeon_device *rdev, struct radeon_ring *
}
/**
* radeon_ring_force_activity - update lockup variables
* radeon_ring_lockup_update - update lockup variables
*
* @ring: radeon_ring structure holding ring information
*

6
drivers/gpu/drm/radeon/si.c

@ -2007,7 +2007,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB0_WPTR, ring->wptr);
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB0_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
@ -2040,7 +2040,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB1_WPTR, ring->wptr);
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB1_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFF);
@ -2066,7 +2066,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB2_WPTR, ring->wptr);
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB2_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFF);

2
drivers/i2c/busses/i2c-nuc900.c

@ -304,7 +304,7 @@ retry_write:
case STATE_READ:
/* we have a byte of data in the data register, do
* something with it, and then work out wether we are
* something with it, and then work out whether we are
* going to do any more read/write
*/

4
drivers/i2c/busses/i2c-s3c2410.c

@ -208,7 +208,7 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
if (msg->flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
/* todo - check for wether ack wanted or not */
/* todo - check for whether ack wanted or not */
s3c24xx_i2c_enable_ack(i2c);
iiccon = readl(i2c->regs + S3C2410_IICCON);
@ -397,7 +397,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
case STATE_READ:
/* we have a byte of data in the data register, do
* something with it, and then work out wether we are
* something with it, and then work out whether we are
* going to do any more read/write
*/

2
drivers/isdn/hisax/amd7930_fn.c

@ -628,7 +628,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg)
if ((cs->dc.amd7930.ph_state == 8)) {
/* b-channels off, PH-AR cleared
* change to F3 */
Amd7930_ph_command(cs, 0x20, "HW_RESET REQEST"); //LMR1 bit 5
Amd7930_ph_command(cs, 0x20, "HW_RESET REQUEST"); //LMR1 bit 5
spin_unlock_irqrestore(&cs->lock, flags);
} else {
Amd7930_ph_command(cs, 0x40, "HW_RESET REQUEST");

2
drivers/isdn/hisax/isar.c

@ -1417,7 +1417,7 @@ modeisar(struct BCState *bcs, int mode, int bc)
&bcs->hw.isar.reg->Flags))
bcs->hw.isar.dpath = 1;
else {
printk(KERN_WARNING"isar modeisar both pathes in use\n");
printk(KERN_WARNING"isar modeisar both paths in use\n");
return (1);
}
break;

2
drivers/md/md.c

@ -4124,7 +4124,7 @@ static struct md_sysfs_entry md_size =
__ATTR(component_size, S_IRUGO|S_IWUSR, size_show, size_store);
/* Metdata version.
/* Metadata version.
* This is one of
* 'none' for arrays with no metadata (good luck...)
* 'external' for arrays with externally managed metadata,

4
drivers/md/persistent-data/dm-block-manager.c

@ -25,7 +25,7 @@
* may be held at once. This is just an implementation detail.
*
* ii) Recursive locking attempts are detected and return EINVAL. A stack
* trace is also emitted for the previous lock aquisition.
* trace is also emitted for the previous lock acquisition.
*
* iii) Priority is given to write locks.
*/
@ -109,7 +109,7 @@ static int __check_holder(struct block_lock *lock)
DMERR("previously held here:");
print_stack_trace(lock->traces + i, 4);
DMERR("subsequent aquisition attempted here:");
DMERR("subsequent acquisition attempted here:");
t.nr_entries = 0;
t.max_entries = MAX_STACK;
t.entries = entries;

2
drivers/md/persistent-data/dm-btree.h

@ -35,7 +35,7 @@ struct dm_transaction_manager;
*/
/*
* Infomation about the values stored within the btree.
* Information about the values stored within the btree.
*/
struct dm_btree_value_type {
void *context;

2
drivers/md/raid5.c

@ -1576,7 +1576,7 @@ static int resize_stripes(struct r5conf *conf, int newsize)
* This happens in stages:
* 1/ create a new kmem_cache and allocate the required number of
* stripe_heads.
* 2/ gather all the old stripe_heads and tranfer the pages across
* 2/ gather all the old stripe_heads and transfer the pages across
* to the new stripe_heads. This will have the side effect of
* freezing the array as once all stripe_heads have been collected,
* no IO will be possible. Old stripe heads are freed once their

2
drivers/media/dvb-frontends/drxk_hard.c

@ -948,7 +948,7 @@ static int GetDeviceCapabilities(struct drxk_state *state)
state->m_oscClockFreq = 20250;
break;
default:
printk(KERN_ERR "drxk: Clock Frequency is unkonwn\n");
printk(KERN_ERR "drxk: Clock Frequency is unknown\n");
return -EINVAL;
}
/*

2
drivers/media/platform/mx2_emmaprp.c

@ -371,7 +371,7 @@ static irqreturn_t emmaprp_irq(int irq_emma, void *data)
if (!curr_ctx->aborting) {
if ((irqst & PRP_INTR_ST_RDERR) ||
(irqst & PRP_INTR_ST_CH2WERR)) {
pr_err("PrP bus error ocurred, this transfer is probably corrupted\n");
pr_err("PrP bus error occurred, this transfer is probably corrupted\n");
writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL);
} else if (irqst & PRP_INTR_ST_CH2B1CI) { /* buffer ready */
src_vb = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx);

12
drivers/message/i2o/README.ioctl

@ -138,7 +138,7 @@ VI. Setting Parameters
The return value is the size in bytes of the data written into
ops->resbuf if no errors occur. If an error occurs, -1 is returned
and errno is set appropriatly:
and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@ -222,7 +222,7 @@ VIII. Downloading Software
RETURNS
This function returns 0 no errors occur. If an error occurs, -1
is returned and errno is set appropriatly:
is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@ -264,7 +264,7 @@ IX. Uploading Software
RETURNS
This function returns 0 if no errors occur. If an error occurs, -1
is returned and errno is set appropriatly:
is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@ -301,7 +301,7 @@ X. Removing Software
RETURNS
This function returns 0 if no errors occur. If an error occurs, -1
is returned and errno is set appropriatly:
is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@ -325,7 +325,7 @@ X. Validating Configuration
RETURNS
This function returns 0 if no erro occur. If an error occurs, -1 is
returned and errno is set appropriatly:
returned and errno is set appropriately:
ETIMEDOUT Timeout waiting for reply message
ENXIO Invalid IOP number
@ -360,7 +360,7 @@ XI. Configuration Dialog
RETURNS
This function returns 0 if no error occur. If an error occurs, -1
is returned and errno is set appropriatly:
is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number

2
drivers/message/i2o/i2o_block.c

@ -609,7 +609,7 @@ static int i2o_block_release(struct gendisk *disk, fmode_t mode)
u8 operation;
/*
* This is to deail with the case of an application
* This is to deal with the case of an application
* opening a device and then the device disappears while
* it's in use, and then the application tries to release
* it. ex: Unmounting a deleted RAID volume at reboot.

2
drivers/message/i2o/i2o_config.c

@ -189,7 +189,7 @@ static int i2o_cfg_parms(unsigned long arg, unsigned int type)
return -ENXIO;
/*
* Stop users being able to try and allocate arbitary amounts
* Stop users being able to try and allocate arbitrary amounts
* of DMA space. 64K is way more than sufficient for this.
*/
if (kcmd.oplen > 65536)

2
drivers/mmc/host/Kconfig

@ -533,7 +533,7 @@ config MMC_DW_PLTFM
If unsure, say Y.
config MMC_DW_EXYNOS
tristate "Exynos specific extentions for Synopsys DW Memory Card Interface"
tristate "Exynos specific extensions for Synopsys DW Memory Card Interface"
depends on MMC_DW
select MMC_DW_PLTFM
help

2
drivers/mtd/maps/plat-ram.c

@ -219,7 +219,7 @@ static int platram_probe(struct platform_device *pdev)
platram_setrw(info, PLATRAM_RW);
/* check to see if there are any available partitions, or wether
/* check to see if there are any available partitions, or whether
* to add this device whole */
err = mtd_device_parse_register(info->mtd, pdata->probes, NULL,

2
drivers/mtd/nand/s3c2410.c

@ -879,7 +879,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
if (chip->ecc.mode != NAND_ECC_HW)
return;
/* change the behaviour depending on wether we are using
/* change the behaviour depending on whether we are using
* the large or small page nand device */
if (chip->page_shift > 10) {

2
drivers/net/bonding/bonding.h

@ -245,7 +245,7 @@ struct bonding {
struct delayed_work ad_work;
struct delayed_work mcast_work;
#ifdef CONFIG_DEBUG_FS
/* debugging suport via debugfs */
/* debugging support via debugfs */
struct dentry *debug_dir;
#endif /* CONFIG_DEBUG_FS */
};

2
drivers/net/ethernet/8390/ax88796.c