ARM: spear: remove most mach/*.h header contents

The register and irq definitions in mach/*.h for spear3xx and
spear6xx are now mostly obsolete, after the platforms have been
converted to device tree based probing and the data is now
part of the device tree files.

The misc_regs.h contents are moved into clock.c because that is
the only user, aside from the DMA_CHN_CFG that should eventually
get handled differently. Some of the contents of mach/spear.h
still remain, because they are used to set up the static map table,
timer, uart and auxdata tables, but almost everything got removed.
We might remove everything but the map table as the DT conversion
completes, but that is not a priority. I've also made sure to
make both copies of spear.h more or less identical so we can
eventually combine them.

The spear3?0.h files were only used by the spear3?0.c files, so I
merged the contents in there and removed the bits that were unused.
This is something that should still be looked at.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
master
Arnd Bergmann 11 years ago
parent f3215b427b
commit 5019f0b134
  1. 98
      arch/arm/mach-spear3xx/clock.c
  2. 11
      arch/arm/mach-spear3xx/include/mach/generic.h
  3. 21
      arch/arm/mach-spear3xx/include/mach/hardware.h
  4. 130
      arch/arm/mach-spear3xx/include/mach/irqs.h
  5. 144
      arch/arm/mach-spear3xx/include/mach/misc_regs.h
  6. 38
      arch/arm/mach-spear3xx/include/mach/spear.h
  7. 54
      arch/arm/mach-spear3xx/include/mach/spear300.h
  8. 58
      arch/arm/mach-spear3xx/include/mach/spear310.h
  9. 67
      arch/arm/mach-spear3xx/include/mach/spear320.h
  10. 41
      arch/arm/mach-spear3xx/spear300.c
  11. 62
      arch/arm/mach-spear3xx/spear310.c
  12. 62
      arch/arm/mach-spear3xx/spear320.c
  13. 4
      arch/arm/mach-spear3xx/spear3xx.c
  14. 106
      arch/arm/mach-spear6xx/clock.c
  15. 29
      arch/arm/mach-spear6xx/include/mach/generic.h
  16. 24
      arch/arm/mach-spear6xx/include/mach/hardware.h
  17. 75
      arch/arm/mach-spear6xx/include/mach/irqs.h
  18. 154
      arch/arm/mach-spear6xx/include/mach/misc_regs.h
  19. 55
      arch/arm/mach-spear6xx/include/mach/spear.h
  20. 21
      arch/arm/mach-spear6xx/include/mach/spear600.h
  21. 49
      arch/arm/mach-spear6xx/spear6xx.c
  22. 2
      arch/arm/plat-spear/include/plat/debug-macro.S
  23. 17
      arch/arm/plat-spear/include/plat/hardware.h
  24. 2
      arch/arm/plat-spear/include/plat/uncompress.h
  25. 1
      arch/arm/plat-spear/pl080.c
  26. 2
      arch/arm/plat-spear/restart.c
  27. 17
      arch/arm/plat-spear/time.c
  28. 1
      drivers/of/address.c

@ -19,6 +19,104 @@
#include <asm/mach-types.h>
#include <plat/clock.h>
#include <mach/misc_regs.h>
#include <mach/spear.h>
#define PLL1_CTR (MISC_BASE + 0x008)
#define PLL1_FRQ (MISC_BASE + 0x00C)
#define PLL1_MOD (MISC_BASE + 0x010)
#define PLL2_CTR (MISC_BASE + 0x014)
/* PLL_CTR register masks */
#define PLL_ENABLE 2
#define PLL_MODE_SHIFT 4
#define PLL_MODE_MASK 0x3
#define PLL_MODE_NORMAL 0
#define PLL_MODE_FRACTION 1
#define PLL_MODE_DITH_DSB 2
#define PLL_MODE_DITH_SSB 3
#define PLL2_FRQ (MISC_BASE + 0x018)
/* PLL FRQ register masks */
#define PLL_DIV_N_SHIFT 0
#define PLL_DIV_N_MASK 0xFF
#define PLL_DIV_P_SHIFT 8
#define PLL_DIV_P_MASK 0x7
#define PLL_NORM_FDBK_M_SHIFT 24
#define PLL_NORM_FDBK_M_MASK 0xFF
#define PLL_DITH_FDBK_M_SHIFT 16
#define PLL_DITH_FDBK_M_MASK 0xFFFF
#define PLL2_MOD (MISC_BASE + 0x01C)
#define PLL_CLK_CFG (MISC_BASE + 0x020)
#define CORE_CLK_CFG (MISC_BASE + 0x024)
/* CORE CLK CFG register masks */
#define PLL_HCLK_RATIO_SHIFT 10
#define PLL_HCLK_RATIO_MASK 0x3
#define HCLK_PCLK_RATIO_SHIFT 8
#define HCLK_PCLK_RATIO_MASK 0x3
#define PERIP_CLK_CFG (MISC_BASE + 0x028)
/* PERIP_CLK_CFG register masks */
#define UART_CLK_SHIFT 4
#define UART_CLK_MASK 0x1
#define FIRDA_CLK_SHIFT 5
#define FIRDA_CLK_MASK 0x3
#define GPT0_CLK_SHIFT 8
#define GPT1_CLK_SHIFT 11
#define GPT2_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
#define AUX_CLK_PLL3_VAL 0
#define AUX_CLK_PLL1_VAL 1
#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART_CLK_ENB 3
#define SSP_CLK_ENB 5
#define I2C_CLK_ENB 7
#define JPEG_CLK_ENB 8
#define FIRDA_CLK_ENB 10
#define GPT1_CLK_ENB 11
#define GPT2_CLK_ENB 12
#define ADC_CLK_ENB 15
#define RTC_CLK_ENB 17
#define GPIO_CLK_ENB 18
#define DMA_CLK_ENB 19
#define SMI_CLK_ENB 21
#define GMAC_CLK_ENB 23
#define USBD_CLK_ENB 24
#define USBH_CLK_ENB 25
#define C3_CLK_ENB 31
#define RAS_CLK_ENB (MISC_BASE + 0x034)
#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
/* gpt synthesizer register masks */
#define GPT_MSCALE_SHIFT 0
#define GPT_MSCALE_MASK 0xFFF
#define GPT_NSCALE_SHIFT 12
#define GPT_NSCALE_MASK 0xF
#define AMEM_CLK_CFG (MISC_BASE + 0x050)
#define EXPI_CLK_CFG (MISC_BASE + 0x054)
#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
#define UART_CLK_SYNT (MISC_BASE + 0x064)
#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0
#define AUX_EQ2_SEL 1
#define AUX_XSCALE_SHIFT 16
#define AUX_XSCALE_MASK 0xFFF
#define AUX_YSCALE_SHIFT 0
#define AUX_YSCALE_MASK 0xFFF
/* root clks */
/* 32 KHz oscillator clock */

@ -22,22 +22,13 @@
#include <asm/mach/map.h>
#include <plat/padmux.h>
/* spear3xx declarations */
/*
* Each GPT has 2 timer channels
* Following GPT channels will be used as clock source and clockevent
*/
#define SPEAR_GPT0_BASE SPEAR3XX_ML1_TMR_BASE
#define SPEAR_GPT0_CHAN0_IRQ SPEAR3XX_IRQ_CPU_GPT1_1
#define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2
/* Add spear3xx family device structure declarations here */
extern struct sys_timer spear3xx_timer;
extern struct pl022_ssp_controller pl022_plat_data;
extern struct pl08x_platform_data pl080_plat_data;
/* Add spear3xx family function declarations here */
void __init spear_setup_timer(void);
void __init spear_setup_timer(resource_size_t base, int irq);
void __init spear3xx_map_io(void);
void __init spear3xx_dt_init_irq(void);

@ -1,20 +1 @@
/*
* arch/arm/mach-spear3xx/include/mach/hardware.h
*
* Hardware definitions for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
#include <plat/hardware.h>
#include <mach/spear.h>
#endif /* __MACH_HARDWARE_H */
/* empty */

@ -14,141 +14,15 @@
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
/* SPEAr3xx IRQ definitions */
#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0 0
/* FIXME: probe all these from DT */
#define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM 1
#define SPEAR3XX_IRQ_CPU_GPT1_1 2
#define SPEAR3XX_IRQ_CPU_GPT1_2 3
#define SPEAR3XX_IRQ_BASIC_GPT1_1 4
#define SPEAR3XX_IRQ_BASIC_GPT1_2 5
#define SPEAR3XX_IRQ_BASIC_GPT2_1 6
#define SPEAR3XX_IRQ_BASIC_GPT2_2 7
#define SPEAR3XX_IRQ_BASIC_DMA 8
#define SPEAR3XX_IRQ_BASIC_SMI 9
#define SPEAR3XX_IRQ_BASIC_RTC 10
#define SPEAR3XX_IRQ_BASIC_GPIO 11
#define SPEAR3XX_IRQ_BASIC_WDT 12
#define SPEAR3XX_IRQ_DDR_CONTROLLER 13
#define SPEAR3XX_IRQ_SYS_ERROR 14
#define SPEAR3XX_IRQ_WAKEUP_RCV 15
#define SPEAR3XX_IRQ_JPEG 16
#define SPEAR3XX_IRQ_IRDA 17
#define SPEAR3XX_IRQ_ADC 18
#define SPEAR3XX_IRQ_UART 19
#define SPEAR3XX_IRQ_SSP 20
#define SPEAR3XX_IRQ_I2C 21
#define SPEAR3XX_IRQ_MAC_1 22
#define SPEAR3XX_IRQ_MAC_2 23
#define SPEAR3XX_IRQ_USB_DEV 24
#define SPEAR3XX_IRQ_USB_H_OHCI_0 25
#define SPEAR3XX_IRQ_USB_H_EHCI_0 26
#define SPEAR3XX_IRQ_USB_H_EHCI_1 SPEAR3XX_IRQ_USB_H_EHCI_0
#define SPEAR3XX_IRQ_USB_H_OHCI_1 27
#define SPEAR3XX_IRQ_GEN_RAS_1 28
#define SPEAR3XX_IRQ_GEN_RAS_2 29
#define SPEAR3XX_IRQ_GEN_RAS_3 30
#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1 31
#define SPEAR3XX_IRQ_VIC_END 32
#define SPEAR3XX_VIRQ_START SPEAR3XX_IRQ_VIC_END
/* SPEAr300 Virtual irq definitions */
/* IRQs sharing IRQ_GEN_RAS_1 */
#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0)
#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1)
#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2)
#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3)
#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4)
#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5)
#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6)
#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7)
#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8)
/* IRQs sharing IRQ_GEN_RAS_3 */
#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3
/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
/* SPEAr310 Virtual irq definitions */
/* IRQs sharing IRQ_GEN_RAS_1 */
#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0)
#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1)
#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2)
#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3)
#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4)
#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5)
#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6)
#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7)
/* IRQs sharing IRQ_GEN_RAS_2 */
#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10)
#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11)
#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12)
/* IRQs sharing IRQ_GEN_RAS_3 */
#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13)
#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14)
/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15)
#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16)
#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17)
/* SPEAr320 Virtual irq definitions */
/* IRQs sharing IRQ_GEN_RAS_1 */
#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0)
#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1)
#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2)
/* IRQs sharing IRQ_GEN_RAS_2 */
#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2
/* IRQs sharing IRQ_GEN_RAS_3 */
#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3)
#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4)
#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5)
/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6)
#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7)
#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10)
#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11)
#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12)
#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13)
#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14)
#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15)
#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16)
/*
* GPIO pins virtual irqs
* Use the lowest number for the GPIO virtual IRQs base on which subarchs
* we have compiled in
*/
#if defined(CONFIG_MACH_SPEAR310)
#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 18)
#elif defined(CONFIG_MACH_SPEAR320)
#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 17)
#else
#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 9)
#endif
#define SPEAR300_GPIO1_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8)
#define SPEAR3XX_PLGPIO_COUNT 102
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
#define SPEAR3XX_PLGPIO_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8)
#define SPEAR3XX_GPIO_INT_END (SPEAR3XX_PLGPIO_INT_BASE + \
SPEAR3XX_PLGPIO_COUNT)
#else
#define SPEAR3XX_GPIO_INT_END (SPEAR300_GPIO1_INT_BASE + 8)
#endif
#define SPEAR3XX_VIRQ_END SPEAR3XX_GPIO_INT_END
#define NR_IRQS SPEAR3XX_VIRQ_END
#define NR_IRQS 160
#endif /* __MACH_IRQS_H */

@ -14,151 +14,7 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
#include <mach/hardware.h>
#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
#define SOC_CFG_CTR (MISC_BASE + 0x000)
#define DIAG_CFG_CTR (MISC_BASE + 0x004)
#define PLL1_CTR (MISC_BASE + 0x008)
#define PLL1_FRQ (MISC_BASE + 0x00C)
#define PLL1_MOD (MISC_BASE + 0x010)
#define PLL2_CTR (MISC_BASE + 0x014)
/* PLL_CTR register masks */
#define PLL_ENABLE 2
#define PLL_MODE_SHIFT 4
#define PLL_MODE_MASK 0x3
#define PLL_MODE_NORMAL 0
#define PLL_MODE_FRACTION 1
#define PLL_MODE_DITH_DSB 2
#define PLL_MODE_DITH_SSB 3
#define PLL2_FRQ (MISC_BASE + 0x018)
/* PLL FRQ register masks */
#define PLL_DIV_N_SHIFT 0
#define PLL_DIV_N_MASK 0xFF
#define PLL_DIV_P_SHIFT 8
#define PLL_DIV_P_MASK 0x7
#define PLL_NORM_FDBK_M_SHIFT 24
#define PLL_NORM_FDBK_M_MASK 0xFF
#define PLL_DITH_FDBK_M_SHIFT 16
#define PLL_DITH_FDBK_M_MASK 0xFFFF
#define PLL2_MOD (MISC_BASE + 0x01C)
#define PLL_CLK_CFG (MISC_BASE + 0x020)
#define CORE_CLK_CFG (MISC_BASE + 0x024)
/* CORE CLK CFG register masks */
#define PLL_HCLK_RATIO_SHIFT 10
#define PLL_HCLK_RATIO_MASK 0x3
#define HCLK_PCLK_RATIO_SHIFT 8
#define HCLK_PCLK_RATIO_MASK 0x3
#define PERIP_CLK_CFG (MISC_BASE + 0x028)
/* PERIP_CLK_CFG register masks */
#define UART_CLK_SHIFT 4
#define UART_CLK_MASK 0x1
#define FIRDA_CLK_SHIFT 5
#define FIRDA_CLK_MASK 0x3
#define GPT0_CLK_SHIFT 8
#define GPT1_CLK_SHIFT 11
#define GPT2_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
#define AUX_CLK_PLL3_VAL 0
#define AUX_CLK_PLL1_VAL 1
#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART_CLK_ENB 3
#define SSP_CLK_ENB 5
#define I2C_CLK_ENB 7
#define JPEG_CLK_ENB 8
#define FIRDA_CLK_ENB 10
#define GPT1_CLK_ENB 11
#define GPT2_CLK_ENB 12
#define ADC_CLK_ENB 15
#define RTC_CLK_ENB 17
#define GPIO_CLK_ENB 18
#define DMA_CLK_ENB 19
#define SMI_CLK_ENB 21
#define GMAC_CLK_ENB 23
#define USBD_CLK_ENB 24
#define USBH_CLK_ENB 25
#define C3_CLK_ENB 31
#define SOC_CORE_ID (MISC_BASE + 0x030)
#define RAS_CLK_ENB (MISC_BASE + 0x034)
#define PERIP1_SOF_RST (MISC_BASE + 0x038)
/* PERIP1_SOF_RST register masks */
#define JPEG_SOF_RST 8
#define SOC_USER_ID (MISC_BASE + 0x03C)
#define RAS_SOF_RST (MISC_BASE + 0x040)
#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
/* gpt synthesizer register masks */
#define GPT_MSCALE_SHIFT 0
#define GPT_MSCALE_MASK 0xFFF
#define GPT_NSCALE_SHIFT 12
#define GPT_NSCALE_MASK 0xF
#define AMEM_CLK_CFG (MISC_BASE + 0x050)
#define EXPI_CLK_CFG (MISC_BASE + 0x054)
#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
#define UART_CLK_SYNT (MISC_BASE + 0x064)
#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0
#define AUX_EQ2_SEL 1
#define AUX_XSCALE_SHIFT 16
#define AUX_XSCALE_MASK 0xFFF
#define AUX_YSCALE_SHIFT 0
#define AUX_YSCALE_MASK 0xFFF
#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
#define ICM2_ARB_CFG (MISC_BASE + 0x080)
#define ICM3_ARB_CFG (MISC_BASE + 0x084)
#define ICM4_ARB_CFG (MISC_BASE + 0x088)
#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
#define ICM6_ARB_CFG (MISC_BASE + 0x090)
#define ICM7_ARB_CFG (MISC_BASE + 0x094)
#define ICM8_ARB_CFG (MISC_BASE + 0x098)
#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
#define BIST4_CFG_CTR (MISC_BASE + 0x100)
#define BIST5_CFG_CTR (MISC_BASE + 0x104)
#define BIST1_STS_RES (MISC_BASE + 0x108)
#define BIST2_STS_RES (MISC_BASE + 0x10C)
#define BIST3_STS_RES (MISC_BASE + 0x110)
#define BIST4_STS_RES (MISC_BASE + 0x114)
#define BIST5_STS_RES (MISC_BASE + 0x118)
#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
#endif /* __MACH_MISC_REGS_H */

@ -15,61 +15,27 @@
#define __MACH_SPEAR3XX_H
#include <asm/memory.h>
#include <mach/spear300.h>
#include <mach/spear310.h>
#include <mach/spear320.h>
#define SPEAR3XX_ML_SDRAM_BASE UL(0x00000000)
#define SPEAR3XX_ICM9_BASE UL(0xC0000000)
/* ICM1 - Low speed connection */
#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000)
#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000)
#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000)
#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000)
#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000)
#define SPEAR3XX_ICM1_JPEG_BASE UL(0xD0800000)
#define SPEAR3XX_ICM1_IRDA_BASE UL(0xD1000000)
#define SPEAR3XX_ICM1_SRAM_BASE UL(0xD2800000)
/* ICM2 - Application Subsystem */
#define SPEAR3XX_ICM2_HWACCEL0_BASE UL(0xD8800000)
#define SPEAR3XX_ICM2_HWACCEL1_BASE UL(0xD9000000)
/* ICM4 - High Speed Connection */
#define SPEAR3XX_ICM4_BASE UL(0xE0000000)
#define SPEAR3XX_ICM4_MII_BASE UL(0xE0800000)
#define SPEAR3XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
#define SPEAR3XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
#define SPEAR3XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE UL(0xE1800000)
#define SPEAR3XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
#define SPEAR3XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
#define SPEAR3XX_ICM4_USB_ARB_BASE UL(0xE2800000)
/* ML1 - Multi Layer CPU Subsystem */
#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000)
#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000)
#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
#define SPEAR3XX_CPU_TMR_BASE UL(0xF0000000)
/* ICM3 - Basic Subsystem */
#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000)
#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000)
#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000)
#define SPEAR3XX_ICM3_WDT_BASE UL(0xFC880000)
#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000)
#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000)
#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE

@ -1,54 +0,0 @@
/*
* arch/arm/mach-spear3xx/include/mach/spear300.h
*
* SPEAr300 Machine specific definition
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifdef CONFIG_MACH_SPEAR300
#ifndef __MACH_SPEAR300_H
#define __MACH_SPEAR300_H
/* Base address of various IPs */
#define SPEAR300_TELECOM_BASE UL(0x50000000)
/* Interrupt registers offsets and masks */
#define SPEAR300_INT_ENB_MASK_REG 0x54
#define SPEAR300_INT_STS_MASK_REG 0x58
#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0)
#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1)
#define SPEAR300_I2S_IRQ_MASK (1 << 2)
#define SPEAR300_TDM_IRQ_MASK (1 << 3)
#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4)
#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5)
#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6)
#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7)
#define SPEAR300_GPIO1_IRQ_MASK (1 << 8)
#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF
#define SPEAR300_CLCD_BASE UL(0x60000000)
#define SPEAR300_SDHCI_BASE UL(0x70000000)
#define SPEAR300_NAND_0_BASE UL(0x80000000)
#define SPEAR300_NAND_1_BASE UL(0x84000000)
#define SPEAR300_NAND_2_BASE UL(0x88000000)
#define SPEAR300_NAND_3_BASE UL(0x8c000000)
#define SPEAR300_NOR_0_BASE UL(0x90000000)
#define SPEAR300_NOR_1_BASE UL(0x91000000)
#define SPEAR300_NOR_2_BASE UL(0x92000000)
#define SPEAR300_NOR_3_BASE UL(0x93000000)
#define SPEAR300_FSMC_BASE UL(0x94000000)
#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000)
#define SPEAR300_KEYBOARD_BASE UL(0xA0000000)
#define SPEAR300_GPIO_BASE UL(0xA9000000)
#endif /* __MACH_SPEAR300_H */
#endif /* CONFIG_MACH_SPEAR300 */

@ -1,58 +0,0 @@
/*
* arch/arm/mach-spear3xx/include/mach/spear310.h
*
* SPEAr310 Machine specific definition
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifdef CONFIG_MACH_SPEAR310
#ifndef __MACH_SPEAR310_H
#define __MACH_SPEAR310_H
#define SPEAR310_NAND_BASE UL(0x40000000)
#define SPEAR310_FSMC_BASE UL(0x44000000)
#define SPEAR310_UART1_BASE UL(0xB2000000)
#define SPEAR310_UART2_BASE UL(0xB2080000)
#define SPEAR310_UART3_BASE UL(0xB2100000)
#define SPEAR310_UART4_BASE UL(0xB2180000)
#define SPEAR310_UART5_BASE UL(0xB2200000)
#define SPEAR310_HDLC_BASE UL(0xB2800000)
#define SPEAR310_RS485_0_BASE UL(0xB3000000)
#define SPEAR310_RS485_1_BASE UL(0xB3800000)
#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000)
/* Interrupt registers offsets and masks */
#define SPEAR310_INT_STS_MASK_REG 0x04
#define SPEAR310_SMII0_IRQ_MASK (1 << 0)
#define SPEAR310_SMII1_IRQ_MASK (1 << 1)
#define SPEAR310_SMII2_IRQ_MASK (1 << 2)
#define SPEAR310_SMII3_IRQ_MASK (1 << 3)
#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4)
#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5)
#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6)
#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7)
#define SPEAR310_UART1_IRQ_MASK (1 << 8)
#define SPEAR310_UART2_IRQ_MASK (1 << 9)
#define SPEAR310_UART3_IRQ_MASK (1 << 10)
#define SPEAR310_UART4_IRQ_MASK (1 << 11)
#define SPEAR310_UART5_IRQ_MASK (1 << 12)
#define SPEAR310_EMI_IRQ_MASK (1 << 13)
#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14)
#define SPEAR310_RS485_0_IRQ_MASK (1 << 15)
#define SPEAR310_RS485_1_IRQ_MASK (1 << 16)
#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF
#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00
#define SPEAR310_SHIRQ_RAS3_MASK 0x02000
#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000
#endif /* __MACH_SPEAR310_H */
#endif /* CONFIG_MACH_SPEAR310 */

@ -1,67 +0,0 @@
/*
* arch/arm/mach-spear3xx/include/mach/spear320.h
*
* SPEAr320 Machine specific definition
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifdef CONFIG_MACH_SPEAR320
#ifndef __MACH_SPEAR320_H
#define __MACH_SPEAR320_H
#define SPEAR320_EMI_CTRL_BASE UL(0x40000000)
#define SPEAR320_FSMC_BASE UL(0x4C000000)
#define SPEAR320_NAND_BASE UL(0x50000000)
#define SPEAR320_I2S_BASE UL(0x60000000)
#define SPEAR320_SDHCI_BASE UL(0x70000000)
#define SPEAR320_CLCD_BASE UL(0x90000000)
#define SPEAR320_PAR_PORT_BASE UL(0xA0000000)
#define SPEAR320_CAN0_BASE UL(0xA1000000)
#define SPEAR320_CAN1_BASE UL(0xA2000000)
#define SPEAR320_UART1_BASE UL(0xA3000000)
#define SPEAR320_UART2_BASE UL(0xA4000000)
#define SPEAR320_SSP0_BASE UL(0xA5000000)
#define SPEAR320_SSP1_BASE UL(0xA6000000)
#define SPEAR320_I2C_BASE UL(0xA7000000)
#define SPEAR320_PWM_BASE UL(0xA8000000)
#define SPEAR320_SMII0_BASE UL(0xAA000000)
#define SPEAR320_SMII1_BASE UL(0xAB000000)
#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
/* Interrupt registers offsets and masks */
#define SPEAR320_INT_STS_MASK_REG 0x04
#define SPEAR320_INT_CLR_MASK_REG 0x04
#define SPEAR320_INT_ENB_MASK_REG 0x08
#define SPEAR320_GPIO_IRQ_MASK (1 << 0)
#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1)
#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2)
#define SPEAR320_EMI_IRQ_MASK (1 << 7)
#define SPEAR320_CLCD_IRQ_MASK (1 << 8)
#define SPEAR320_SPP_IRQ_MASK (1 << 9)
#define SPEAR320_SDHCI_IRQ_MASK (1 << 10)
#define SPEAR320_CAN_U_IRQ_MASK (1 << 11)
#define SPEAR320_CAN_L_IRQ_MASK (1 << 12)
#define SPEAR320_UART1_IRQ_MASK (1 << 13)
#define SPEAR320_UART2_IRQ_MASK (1 << 14)
#define SPEAR320_SSP1_IRQ_MASK (1 << 15)
#define SPEAR320_SSP2_IRQ_MASK (1 << 16)
#define SPEAR320_SMII0_IRQ_MASK (1 << 17)
#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18)
#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19)
#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20)
#define SPEAR320_I2C1_IRQ_MASK (1 << 21)
#define SPEAR320_SHIRQ_RAS1_MASK 0x000380
#define SPEAR320_SHIRQ_RAS3_MASK 0x000007
#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800
#endif /* __MACH_SPEAR320_H */
#endif /* CONFIG_MACH_SPEAR320 */

@ -19,7 +19,46 @@
#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
#include <mach/spear.h>
/* Base address of various IPs */
#define SPEAR300_TELECOM_BASE UL(0x50000000)
/* Interrupt registers offsets and masks */
#define SPEAR300_INT_ENB_MASK_REG 0x54
#define SPEAR300_INT_STS_MASK_REG 0x58
#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0)
#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1)
#define SPEAR300_I2S_IRQ_MASK (1 << 2)
#define SPEAR300_TDM_IRQ_MASK (1 << 3)
#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4)
#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5)
#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6)
#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7)
#define SPEAR300_GPIO1_IRQ_MASK (1 << 8)
#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF
#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000)
/* SPEAr300 Virtual irq definitions */
/* IRQs sharing IRQ_GEN_RAS_1 */
#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0)
#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1)
#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2)
#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3)
#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4)
#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5)
#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6)
#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7)
#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8)
/* IRQs sharing IRQ_GEN_RAS_3 */
#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3
/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
/* pad multiplexing support */
/* muxing registers */

@ -20,7 +20,67 @@
#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
#include <mach/spear.h>
#define SPEAR310_UART1_BASE UL(0xB2000000)
#define SPEAR310_UART2_BASE UL(0xB2080000)
#define SPEAR310_UART3_BASE UL(0xB2100000)
#define SPEAR310_UART4_BASE UL(0xB2180000)
#define SPEAR310_UART5_BASE UL(0xB2200000)
#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000)
/* Interrupt registers offsets and masks */
#define SPEAR310_INT_STS_MASK_REG 0x04
#define SPEAR310_SMII0_IRQ_MASK (1 << 0)
#define SPEAR310_SMII1_IRQ_MASK (1 << 1)
#define SPEAR310_SMII2_IRQ_MASK (1 << 2)
#define SPEAR310_SMII3_IRQ_MASK (1 << 3)
#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4)
#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5)
#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6)
#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7)
#define SPEAR310_UART1_IRQ_MASK (1 << 8)
#define SPEAR310_UART2_IRQ_MASK (1 << 9)
#define SPEAR310_UART3_IRQ_MASK (1 << 10)
#define SPEAR310_UART4_IRQ_MASK (1 << 11)
#define SPEAR310_UART5_IRQ_MASK (1 << 12)
#define SPEAR310_EMI_IRQ_MASK (1 << 13)
#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14)
#define SPEAR310_RS485_0_IRQ_MASK (1 << 15)
#define SPEAR310_RS485_1_IRQ_MASK (1 << 16)
#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF
#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00
#define SPEAR310_SHIRQ_RAS3_MASK 0x02000
#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000
/* SPEAr310 Virtual irq definitions */
/* IRQs sharing IRQ_GEN_RAS_1 */
#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0)
#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1)
#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2)
#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3)
#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4)
#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5)
#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6)
#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7)
/* IRQs sharing IRQ_GEN_RAS_2 */
#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10)
#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11)
#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12)
/* IRQs sharing IRQ_GEN_RAS_3 */
#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13)
#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14)
/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15)
#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16)
#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17)
/* pad multiplexing support */
/* muxing registers */

@ -21,7 +21,67 @@
#include <asm/mach/arch.h>
#include <plat/shirq.h>
#include <mach/generic.h>
#include <mach/hardware.h>
#include <mach/spear.h>
#define SPEAR320_UART1_BASE UL(0xA3000000)
#define SPEAR320_UART2_BASE UL(0xA4000000)
#define SPEAR320_SSP0_BASE UL(0xA5000000)
#define SPEAR320_SSP1_BASE UL(0xA6000000)
#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
/* Interrupt registers offsets and masks */
#define SPEAR320_INT_STS_MASK_REG 0x04
#define SPEAR320_INT_CLR_MASK_REG 0x04
#define SPEAR320_INT_ENB_MASK_REG 0x08
#define SPEAR320_GPIO_IRQ_MASK (1 << 0)
#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1)
#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2)
#define SPEAR320_EMI_IRQ_MASK (1 << 7)
#define SPEAR320_CLCD_IRQ_MASK (1 << 8)
#define SPEAR320_SPP_IRQ_MASK (1 << 9)
#define SPEAR320_SDHCI_IRQ_MASK (1 << 10)
#define SPEAR320_CAN_U_IRQ_MASK (1 << 11)
#define SPEAR320_CAN_L_IRQ_MASK (1 << 12)
#define SPEAR320_UART1_IRQ_MASK (1 << 13)
#define SPEAR320_UART2_IRQ_MASK (1 << 14)
#define SPEAR320_SSP1_IRQ_MASK (1 << 15)
#define SPEAR320_SSP2_IRQ_MASK (1 << 16)
#define SPEAR320_SMII0_IRQ_MASK (1 << 17)
#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18)
#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19)
#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20)
#define SPEAR320_I2C1_IRQ_MASK (1 << 21)
#define SPEAR320_SHIRQ_RAS1_MASK 0x000380
#define SPEAR320_SHIRQ_RAS3_MASK 0x000007
#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800
/* SPEAr320 Virtual irq definitions */
/* IRQs sharing IRQ_GEN_RAS_1 */
#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0)
#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1)
#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2)
/* IRQs sharing IRQ_GEN_RAS_2 */
#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2
/* IRQs sharing IRQ_GEN_RAS_3 */
#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3)
#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4)
#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5)
/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6)
#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7)
#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8)
#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9)
#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10)
#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11)
#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12)
#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13)
#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14)
#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15)
#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16)
/* pad multiplexing support */
/* muxing registers */

@ -21,7 +21,7 @@
#include <asm/hardware/vic.h>
#include <plat/pl080.h>
#include <mach/generic.h>
#include <mach/hardware.h>
#include <mach/spear.h>
/* pad multiplexing support */
/* devices */
@ -534,7 +534,7 @@ static void __init spear3xx_timer_init(void)
clk_put(gpt_clk);
clk_put(pclk);
spear_setup_timer();
spear_setup_timer(SPEAR3XX_CPU_TMR_BASE, SPEAR3XX_IRQ_CPU_GPT1_1);
}
struct sys_timer spear3xx_timer = {

@ -16,6 +16,112 @@
#include <linux/kernel.h>
#include <plat/clock.h>
#include <mach/misc_regs.h>
#include <mach/spear.h>
#define PLL1_CTR (MISC_BASE + 0x008)
#define PLL1_FRQ (MISC_BASE + 0x00C)
#define PLL1_MOD (MISC_BASE + 0x010)
#define PLL2_CTR (MISC_BASE + 0x014)
/* PLL_CTR register masks */
#define PLL_ENABLE 2
#define PLL_MODE_SHIFT 4
#define PLL_MODE_MASK 0x3
#define PLL_MODE_NORMAL 0
#define PLL_MODE_FRACTION 1
#define PLL_MODE_DITH_DSB 2
#define PLL_MODE_DITH_SSB 3
#define PLL2_FRQ (MISC_BASE + 0x018)
/* PLL FRQ register masks */
#define PLL_DIV_N_SHIFT 0
#define PLL_DIV_N_MASK 0xFF
#define PLL_DIV_P_SHIFT 8
#define PLL_DIV_P_MASK 0x7
#define PLL_NORM_FDBK_M_SHIFT 24
#define PLL_NORM_FDBK_M_MASK 0xFF
#define PLL_DITH_FDBK_M_SHIFT 16
#define PLL_DITH_FDBK_M_MASK 0xFFFF
#define PLL2_MOD (MISC_BASE + 0x01C)
#define PLL_CLK_CFG (MISC_BASE + 0x020)
#define CORE_CLK_CFG (MISC_BASE + 0x024)
/* CORE CLK CFG register masks */
#define PLL_HCLK_RATIO_SHIFT 10
#define PLL_HCLK_RATIO_MASK 0x3
#define HCLK_PCLK_RATIO_SHIFT 8
#define HCLK_PCLK_RATIO_MASK 0x3
#define PERIP_CLK_CFG (MISC_BASE + 0x028)
/* PERIP_CLK_CFG register masks */
#define CLCD_CLK_SHIFT 2
#define CLCD_CLK_MASK 0x3
#define UART_CLK_SHIFT 4
#define UART_CLK_MASK 0x1
#define FIRDA_CLK_SHIFT 5
#define FIRDA_CLK_MASK 0x3
#define GPT0_CLK_SHIFT 8
#define GPT1_CLK_SHIFT 10
#define GPT2_CLK_SHIFT 11
#define GPT3_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
#define AUX_CLK_PLL3_VAL 0
#define AUX_CLK_PLL1_VAL 1
#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART0_CLK_ENB 3
#define UART1_CLK_ENB 4
#define SSP0_CLK_ENB 5
#define SSP1_CLK_ENB 6
#define I2C_CLK_ENB 7
#define JPEG_CLK_ENB 8
#define FSMC_CLK_ENB 9
#define FIRDA_CLK_ENB 10
#define GPT2_CLK_ENB 11
#define GPT3_CLK_ENB 12
#define GPIO2_CLK_ENB 13
#define SSP2_CLK_ENB 14
#define ADC_CLK_ENB 15
#define GPT1_CLK_ENB 11
#define RTC_CLK_ENB 17
#define GPIO1_CLK_ENB 18
#define DMA_CLK_ENB 19
#define SMI_CLK_ENB 21
#define CLCD_CLK_ENB 22
#define GMAC_CLK_ENB 23
#define USBD_CLK_ENB 24
#define USBH0_CLK_ENB 25
#define USBH1_CLK_ENB 26
#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
/* gpt synthesizer register masks */
#define GPT_MSCALE_SHIFT 0
#define GPT_MSCALE_MASK 0xFFF
#define GPT_NSCALE_SHIFT 12
#define GPT_NSCALE_MASK 0xF
#define AMEM_CLK_CFG (MISC_BASE + 0x050)
#define EXPI_CLK_CFG (MISC_BASE + 0x054)
#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
#define UART_CLK_SYNT (MISC_BASE + 0x064)
#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0
#define AUX_EQ2_SEL 1
#define AUX_XSCALE_SHIFT 16
#define AUX_XSCALE_MASK 0xFFF
#define AUX_YSCALE_SHIFT 0
#define AUX_YSCALE_MASK 0xFFF
/* root clks */
/* 32 KHz oscillator clock */

@ -15,34 +15,9 @@
#define __MACH_GENERIC_H
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
/*
* Each GPT has 2 timer channels
* Following GPT channels will be used as clock source and clockevent
*/
#define SPEAR_GPT0_BASE SPEAR6XX_CPU_TMR_BASE
#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1
#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2
/* Add spear6xx family device structure declarations here */
extern struct amba_device gpio_device[];
extern struct amba_device uart_device[];
extern struct sys_timer spear6xx_timer;
/* Add spear6xx family function declarations here */
void __init spear_setup_timer(void);
void __init spear6xx_map_io(void);
void __init spear6xx_init_irq(void);
void __init spear6xx_init(void);
void __init spear600_init(void);
void __init spear6xx_clk_init(void);
void __init spear_setup_timer(resource_size_t base, int irq);
void spear_restart(char, const char *);
/* Add spear600 machine device structure declarations here */
void __init spear6xx_clk_init(void);
#endif /* __MACH_GENERIC_H */

@ -1,23 +1 @@
/*
* arch/arm/mach-spear6xx/include/mach/hardware.h
*
* Hardware definitions for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
#include <plat/hardware.h>
#include <mach/spear.h>
/* Vitual to physical translation of statically mapped space */
#define IO_ADDRESS(x) (x | 0xF0000000)
#endif /* __MACH_HARDWARE_H */
/* empty */

@ -16,82 +16,13 @@
/* IRQ definitions */
/* VIC 1 */
#define IRQ_INTRCOMM_SW_IRQ 0
#define IRQ_INTRCOMM_CPU_1 1
#define IRQ_INTRCOMM_CPU_2 2
#define IRQ_INTRCOMM_RAS2A11_1 3
#define IRQ_INTRCOMM_RAS2A11_2 4
#define IRQ_INTRCOMM_RAS2A12_1 5
#define IRQ_INTRCOMM_RAS2A12_2 6
#define IRQ_GEN_RAS_0 7
#define IRQ_GEN_RAS_1 8
#define IRQ_GEN_RAS_2 9
#define IRQ_GEN_RAS_3 10
#define IRQ_GEN_RAS_4 11
#define IRQ_GEN_RAS_5 12
#define IRQ_GEN_RAS_6 13
#define IRQ_GEN_RAS_7 14
#define IRQ_GEN_RAS_8 15
/* FIXME: probe this from DT */
#define IRQ_CPU_GPT1_1 16
#define IRQ_CPU_GPT1_2 17
#define IRQ_LOCAL_GPIO 18
#define IRQ_PLL_UNLOCK 19
#define IRQ_JPEG 20
#define IRQ_FSMC 21
#define IRQ_IRDA 22
#define IRQ_RESERVED 23
#define IRQ_UART_0 24
#define IRQ_UART_1 25
#define IRQ_SSP_1 26
#define IRQ_SSP_2 27
#define IRQ_I2C 28
#define IRQ_GEN_RAS_9 29
#define IRQ_GEN_RAS_10 30
#define IRQ_GEN_RAS_11 31
/* VIC 2 */
#define IRQ_APPL_GPT1_1 32
#define IRQ_APPL_GPT1_2 33
#define IRQ_APPL_GPT2_1 34
#define IRQ_APPL_GPT2_2 35
#define IRQ_APPL_GPIO 36
#define IRQ_APPL_SSP 37
#define IRQ_APPL_ADC 38
#define IRQ_APPL_RESERVED 39
#define IRQ_AHB_EXP_MASTER 40
#define IRQ_DDR_CONTROLLER 41
#define IRQ_BASIC_DMA 42
#define IRQ_BASIC_RESERVED1 43
#define IRQ_BASIC_SMI 44
#define IRQ_BASIC_CLCD 45
#define IRQ_EXP_AHB_1 46
#define IRQ_EXP_AHB_2 47
#define IRQ_BASIC_GPT1_1 48
#define IRQ_BASIC_GPT1_2 49
#define IRQ_BASIC_RTC 50
#define IRQ_BASIC_GPIO 51
#define IRQ_BASIC_WDT 52
#define IRQ_BASIC_RESERVED 53
#define IRQ_AHB_EXP_SLAVE 54
#define IRQ_GMAC_1 55
#define IRQ_GMAC_2 56
#define IRQ_USB_DEV 57
#define IRQ_USB_H_OHCI_0 58
#define IRQ_USB_H_EHCI_0 59
#define IRQ_USB_H_OHCI_1 60
#define IRQ_USB_H_EHCI_1 61
#define IRQ_EXP_AHB_3 62
#define IRQ_EXP_AHB_4 63
#define IRQ_VIC_END 64
/* GPIO pins virtual irqs */
#define SPEAR_GPIO_INT_BASE IRQ_VIC_END
#define SPEAR_GPIO0_INT_BASE SPEAR_GPIO_INT_BASE
#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO0_INT_BASE + 8)
#define SPEAR_GPIO2_INT_BASE (SPEAR_GPIO1_INT_BASE + 8)
#define SPEAR_GPIO_INT_END (SPEAR_GPIO2_INT_BASE + 8)
#define VIRTUAL_IRQS (SPEAR_GPIO_INT_END - IRQ_VIC_END)
#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS)
#define VIRTUAL_IRQS 24
#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS)
#endif /* __MACH_IRQS_H */

@ -14,161 +14,7 @@
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
#include <mach/hardware.h>
#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
#define SOC_CFG_CTR (MISC_BASE + 0x000)
#define DIAG_CFG_CTR (MISC_BASE + 0x004)
#define PLL1_CTR (MISC_BASE + 0x008)
#define PLL1_FRQ (MISC_BASE + 0x00C)
#define PLL1_MOD (MISC_BASE + 0x010)
#define PLL2_CTR (MISC_BASE + 0x014)
/* PLL_CTR register masks */
#define PLL_ENABLE 2
#define PLL_MODE_SHIFT 4
#define PLL_MODE_MASK 0x3
#define PLL_MODE_NORMAL 0
#define PLL_MODE_FRACTION 1
#define PLL_MODE_DITH_DSB 2
#define PLL_MODE_DITH_SSB 3
#define PLL2_FRQ (MISC_BASE + 0x018)
/* PLL FRQ register masks */
#define PLL_DIV_N_SHIFT 0
#define PLL_DIV_N_MASK 0xFF
#define PLL_DIV_P_SHIFT 8
#define PLL_DIV_P_MASK 0x7
#define PLL_NORM_FDBK_M_SHIFT 24
#define PLL_NORM_FDBK_M_MASK 0xFF
#define PLL_DITH_FDBK_M_SHIFT 16
#define PLL_DITH_FDBK_M_MASK 0xFFFF
#define PLL2_MOD (MISC_BASE + 0x01C)
#define PLL_CLK_CFG (MISC_BASE + 0x020)
#define CORE_CLK_CFG (MISC_BASE + 0x024)
/* CORE CLK CFG register masks */
#define PLL_HCLK_RATIO_SHIFT 10
#define PLL_HCLK_RATIO_MASK 0x3
#define HCLK_PCLK_RATIO_SHIFT 8
#define HCLK_PCLK_RATIO_MASK 0x3
#define PERIP_CLK_CFG (MISC_BASE + 0x028)
/* PERIP_CLK_CFG register masks */
#define CLCD_CLK_SHIFT 2
#define CLCD_CLK_MASK 0x3
#define UART_CLK_SHIFT 4
#define UART_CLK_MASK 0x1
#define FIRDA_CLK_SHIFT 5
#define FIRDA_CLK_MASK 0x3
#define GPT0_CLK_SHIFT 8
#define GPT1_CLK_SHIFT 10
#define GPT2_CLK_SHIFT 11
#define GPT3_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
#define AUX_CLK_PLL3_VAL 0
#define AUX_CLK_PLL1_VAL 1
#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART0_CLK_ENB 3
#define UART1_CLK_ENB 4
#define SSP0_CLK_ENB 5
#define SSP1_CLK_ENB 6
#define I2C_CLK_ENB 7
#define JPEG_CLK_ENB 8
#define FSMC_CLK_ENB 9
#define FIRDA_CLK_ENB 10
#define GPT2_CLK_ENB 11
#define GPT3_CLK_ENB 12
#define GPIO2_CLK_ENB 13
#define SSP2_CLK_ENB 14
#define ADC_CLK_ENB 15
#define GPT1_CLK_ENB 11
#define RTC_CLK_ENB 17
#define GPIO1_CLK_ENB 18
#define DMA_CLK_ENB 19
#define SMI_CLK_ENB 21
#define CLCD_CLK_ENB 22
#define GMAC_CLK_ENB 23
#define USBD_CLK_ENB 24
#define USBH0_CLK_ENB 25
#define USBH1_CLK_ENB 26
#define SOC_CORE_ID (MISC_BASE + 0x030)
#define RAS_CLK_ENB (MISC_BASE + 0x034)
#define PERIP1_SOF_RST (MISC_BASE + 0x038)
/* PERIP1_SOF_RST register masks */
#define JPEG_SOF_RST 8
#define SOC_USER_ID (MISC_BASE + 0x03C)
#define RAS_SOF_RST (MISC_BASE + 0x040)
#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
/* gpt synthesizer register masks */
#define GPT_MSCALE_SHIFT 0
#define GPT_MSCALE_MASK 0xFFF
#define GPT_NSCALE_SHIFT 12
#define GPT_NSCALE_MASK 0xF
#define AMEM_CLK_CFG (MISC_BASE + 0x050)
#define EXPI_CLK_CFG (MISC_BASE + 0x054)
#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
#define UART_CLK_SYNT (MISC_BASE + 0x064)
#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0
#define AUX_EQ2_SEL 1
#define AUX_XSCALE_SHIFT 16
#define AUX_XSCALE_MASK 0xFFF
#define AUX_YSCALE_SHIFT 0
#define AUX_YSCALE_MASK 0xFFF
#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
#define ICM2_ARB_CFG (MISC_BASE + 0x080)
#define ICM3_ARB_CFG (MISC_BASE + 0x084)
#define ICM4_ARB_CFG (MISC_BASE + 0x088)
#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
#define ICM6_ARB_CFG (MISC_BASE + 0x090)
#define ICM7_ARB_CFG (MISC_BASE + 0x094)
#define ICM8_ARB_CFG (MISC_BASE + 0x098)
#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
#define BIST4_CFG_CTR (MISC_BASE + 0x100)
#define BIST5_CFG_CTR (MISC_BASE + 0x104)
#define BIST1_STS_RES (MISC_BASE + 0x108)
#define BIST2_STS_RES (MISC_BASE + 0x10C)
#define BIST3_STS_RES (MISC_BASE + 0x110)
#define BIST4_STS_RES (MISC_BASE + 0x114)
#define BIST5_STS_RES (MISC_BASE + 0x118)
#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
#endif /* __MACH_MISC_REGS_H */

@ -15,69 +15,26 @@
#define __MACH_SPEAR6XX_H
#include <asm/memory.h>
#include <mach/spear600.h>
#define SPEAR6XX_ML_SDRAM_BASE UL(0x00000000)
/* ICM1 - Low speed connection */
#define SPEAR6XX_ICM1_BASE UL(0xD0000000)
#define VA_SPEAR6XX_ICM1_BASE UL(0xFD000000)
#define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000)
#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
#define SPEAR6XX_ICM1_UART1_BASE UL(0xD0080000)
#define SPEAR6XX_ICM1_SSP0_BASE UL(0xD0100000)
#define SPEAR6XX_ICM1_SSP1_BASE UL(0xD0180000)
#define SPEAR6XX_ICM1_I2C_BASE UL(0xD0200000)
#define SPEAR6XX_ICM1_JPEG_BASE UL(0xD0800000)
#define SPEAR6XX_ICM1_IRDA_BASE UL(0xD1000000)
#define SPEAR6XX_ICM1_FSMC_BASE UL(0xD1800000)
#define SPEAR6XX_ICM1_NAND_BASE UL(0xD2000000)
#define SPEAR6XX_ICM1_SRAM_BASE UL(0xD2800000)
/* ICM2 - Application Subsystem */
#define SPEAR6XX_ICM2_BASE UL(0xD8000000)
#define SPEAR6XX_ICM2_TMR0_BASE UL(0xD8000000)
#define SPEAR6XX_ICM2_TMR1_BASE UL(0xD8080000)
#define SPEAR6XX_ICM2_GPIO_BASE UL(0xD8100000)
#define SPEAR6XX_ICM2_SSP2_BASE UL(0xD8180000)
#define SPEAR6XX_ICM2_ADC_BASE UL(0xD8200000)
#define VA_SPEAR6XX_ICM1_UART0_BASE (VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE)
/* ML-1, 2 - Multi Layer CPU Subsystem */
#define SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
#define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000)
#define SPEAR6XX_CPU_GPIO_BASE UL(0xF0100000)
#define SPEAR6XX_CPU_VIC_SEC_BASE UL(0xF1000000)
#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
#define SPEAR6XX_CPU_VIC_PRI_BASE UL(0xF1100000)
#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
/* ICM3 - Basic Subsystem */
#define SPEAR6XX_ICM3_BASE UL(0xF8000000)
#define SPEAR6XX_ICM3_SMEM_BASE UL(0xF8000000)
#define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define SPEAR6XX_ICM3_CLCD_BASE UL(0xFC200000)
#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
#define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000)
#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
#define SPEAR6XX_ICM3_TMR_BASE UL(0xFC800000)
#define SPEAR6XX_ICM3_WDT_BASE UL(0xFC880000)
#define SPEAR6XX_ICM3_RTC_BASE UL(0xFC900000)
#define SPEAR6XX_ICM3_GPIO_BASE UL(0xFC980000)
#define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE)
#define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
/* ICM4 - High Speed Connection */
#define SPEAR6XX_ICM4_BASE UL(0xE0000000)
#define SPEAR6XX_ICM4_GMAC_BASE UL(0xE0800000)
#define SPEAR6XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
#define SPEAR6XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
#define SPEAR6XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
#define SPEAR6XX_ICM4_USB_EHCI0_BASE UL(0xE1800000)
#define SPEAR6XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
#define SPEAR6XX_ICM4_USB_EHCI1_BASE UL(0xE2000000)
#define SPEAR6XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
#define SPEAR6XX_ICM4_USB_ARB_BASE UL(0xE2800000)
#define VA_SPEAR6XX_ICM3_MISC_REG_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE

@ -1,21 +0,0 @@
/*
* arch/arm/mach-spear66xx/include/mach/spear600.h
*
* SPEAr600 Machine specific definition
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifdef CONFIG_MACH_SPEAR600
#ifndef __MACH_SPEAR600_H
#define __MACH_SPEAR600_H
#endif /* __MACH_SPEAR600_H */
#endif /* CONFIG_MACH_SPEAR600 */

@ -14,6 +14,8 @@
*/
#include <linux/amba/pl08x.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@ -21,9 +23,11 @@
#include <asm/hardware/pl080.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>