The current STIR/SHAKEN implementation is not currently usable due
to encryption issues. Rather than trying to futz with OpenSSL and
the the current code, we can take advantage of the existing
capabilities of libjwt but we first need to add it to the
third-party infrastructure already in place for jansson and
pjproject.
A few tweaks were also made to the third-party infrastructure as
a whole. The jansson "dest" install directory was renamed "dist"
to better match convention, and the third-party Makefile was updated
to clean all product directories not just the ones currently in
use.
Resolves: #349
Removed multiple patches.
Code chages in res_pjsip_pubsub due to changes in evsub.
Pjsip now calls on_evsub_state() before on_rx_refresh(),
so the sub tree deletion that used to take place in
on_evsub_state() now must take place in on_rx_refresh().
Additionally, pjsip now requires that you send the NOTIFY
from within on_rx_refresh(), otherwise it will assert
when going to send the 200 OK. The idea is that it will
look for this NOTIFY and cache it until after sending the
response in order to deal with the self-imposed message
mis-order. Asterisk previously dealt with this by pushing
the NOTIFY in on_rx_refresh(), but pjsip now forces us
to use it's method.
Changes were required to configure in order to detect
which way pjsip handles this as the two are not
compatible for the reasons mentioned above.
A corresponding change in testsuite is required in order
to deal with the small interal timing changes caused by
moving the NOTIFY send.
ASTERISK-30325
Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f
This change removes patches which have been merged into
upstream and updates some existing ones. It also adds
some additional config_site.h changes to restore previous
behavior, as well as a patch to allow multiple Authorization
headers. There seems to be some confusion or disagreement
on language in RFC 8760 in regards to whether multiple
Authorization headers are supported. The RFC implies it
is allowed, as does some past sipcore discussion. There is
also the catch all of "local policy" to allow it. In
the case of Asterisk we allow it.
ASTERISK-29351
Change-Id: Id39ece02dedb7b9f739e0e37ea47d76854af7191
This patch makes the usual necessary changes when upgrading to a new
version pjproject. For instance, version number bump, patches removed
from third-party, new *.md5 file added, etc..
This patch also includes a change to the Asterisk pjproject Makefile to
explicitly create the 'source/pjsip-apps/lib' directory. This directory
is no longer there by default so needs to be added so the Asterisk
malloc debug can be built.
This patch also includes some minor changes to Asterisk that were a result
of the upgrade. Specifically, there was a backward incompatibility change
made in 2.10 that modified the "expires header" variable field from a
signed to an unsigned value. This potentially effects comparison. Namely,
those check for a value less than zero. This patch modified a few locations
in the Asterisk code that may have been affected.
Lastly, this patch adds a new macro PJSIP_MINVERSION that can be used to
check a minimum version of pjproject at compile time.
ASTERISK-28899 #close
Change-Id: Iec8821c6cbbc08c369d0e3cd2f14e691b41d0c81
This brings in jansson-2.12, removes all patches that were merged
upstream. README is created in third-party/jansson/patches to explain
how to add patches but also because the patches folder must exist for
the build process to succeed.
Change-Id: If0f2d541c50997690660c21fb7b03d625a5cdadd
This change brings in PJSIP 2.8, removes all the patches
that were merged upstream, and makes a minor change to
support a breaking change that was done.
ASTERISK-28059
Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189
Update from 2.7 to 2.7.1 for bundled pjproject. Changed version
and removed patch files included in the update.
Change-Id: I55cea8e734b318c2df9daf86aa0802c559ec8357
* Removed all 2.5.5 functional patches.
* Updated usages of pj_release_pool to be "safe".
* Updated configure options to disable webrtc.
* Updated config_site.h to disable webrtc in pjmedia.
* Added Richard Mudgett's recent resolver patches.
Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7
Add more --disable-* switches to Makefile.rules including
--disable-opus which was causing bundled pjproject to fail with
"undefined reference" errors in libasteriskpj.
Changed PJ_ENABLE_EXTRA_CHECK to 1.
Removed 2 obsolete patches and added a new one.
The new one was merged by Teluu on 6/27/2016.
ASTERISK-26148 #close
Change-Id: Ib8af6c6a9d31f7238ce65b336134c2efdc855063
Although all the patches we had against 2.4.5 were applied by Teluu,
a new bug was introduced preventing re-use of tcp and tls transports
This patch removes all the previous patches against 2.4.5, updates
the version to 2.5, and adds a new patch to correct the transport
re-use problem.
Change-Id: I0dc6c438c3910f7887418a5832ca186aea23d068
Background here:
http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html
From CHANGES:
* To help insure that Asterisk is compiled and run with the same known
version of pjproject, a new option (--with-pjproject-bundled) has been
added to ./configure. When specified, the version of pjproject specified
in third-party/versions.mak will be downloaded and configured. When you
make Asterisk, the build process will also automatically build pjproject
and Asterisk will be statically linked to it. Once a particular version
of pjproject is configured and built, it won't be configured or built
again unless you run a 'make distclean'.
To facilitate testing, when 'make install' is run, the pjsua and pjsystest
utilities and the pjproject python bindings will be installed in
ASTDATADIR/third-party/pjproject.
The default behavior remains building with the shared pjproject
installation, if any.
Building:
All you have to do is include the --with-pjproject-bundled option on
the ./configure command line (and remove any existing --with-pjproject
option if specified). Everything else is automatic.
Behind the scenes:
The top-level Makefile was modified to include 'third-party' in the
list of MOD_SUBDIRS.
The third-party directory was created to contain any third party
packages that may be needed in the future. Its Makefile automatically
iterates over any subdirectories passing on targets.
The third-party/pjproject directory was created to house the pjproject
source distribution. Its Makefile contains targets to download, patch
configure, generate dependencies, compile libs, apps and python bindings,
sanitized build.mak and generate a symbols list.
When bootstrap.sh is run, it automatically includes the configure.m4
file in third-party/pjproject. This file has a macro to download and
conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
and PJPROJECT_BUNDLED. It also tests for the capabilities like
PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
trying to compile. Of course, bootstrap.sh is only run once and the
configure file is incldued in the patch.
When configure is run with the new options, the macro in configure.m4
triggers the download, patch, conifgure and tests. No compilation is
performed at this time. The downloaded tarball is cached in /tmp so
it doesn't get downloaded again on a distclean.
When make is run in the top-level Asterisk source directory, it will
automatically descend all the subdirectories in third_party just as it
does for addons, apps, etc. The top-level Makefile makes sure that
the 'third-party' is built before 'main' so that dependencies from the
other directories are built first.
When main does build, a new shared library (libasteriskpj) is created that
links statically to the pjproject .a files and exports all their symbols.
The asterisk binary links to that, just as it does with libasteriskssl.
When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
python bindings are installed in ASTDATADIR/third-party/pjproject. This
will facilitate testing, including running the testsuite which will be
updated to check that directory for the pjsua module ahead of the system
python library.
Modules should continue to depend on pjproject if they use pjproject APIs
directly. They should not care about the implementation. No changes to any
res_pjsip modules were made.
Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103
George Joseph
Stanislav Abramenkov
Mike Bradeen
Joshua C. Colp
Kevin Harwell
Sean Bright
Corey Farrell
Joshua Colp
Richard Mudgett
Ben Ford
George Joseph
George Joseph