This fixes a number of broken links throughout the
tree, mostly caused by wiki.asterisk.org being replaced
with docs.asterisk.org, which should eliminate the
need for sporadic fixes as in f28047db36.
Resolves: #430
Commit 09e989f972
categorized the T option as not being compatible
with remote consoles, but they do affect verbose
messages with remote console. This fixes this.
Resolves: #102
* Remove .gitreview and switch to pulling the main asterisk branch
version from configure.ac instead.
* Replace references to JIRA with GitHub.
* Other minor cleanup found along the way.
Resolves: #39
Adds PJSIP as a supported technology to DUNDi.
To facilitate this, we now allow an endpoint to be specified
for outgoing PJSIP calls. We also allow users to force a specific
channel technology for outgoing SIP-protocol calls.
ASTERISK-28109 #close
ASTERISK-28233 #close
Change-Id: I2e28e5a5d007bd49e3df113ad567b011103899bf
The unit test XML output was counting all registered tests as "run"
even when only a subset were actually requested to be run and
the "failures" attribute was missing.
* The "tests" attribute of the "testsuite" element in the
output XML now reflects only the tests actually requested
to be executed instead of all the tests registered.
* The "failures" attribute was added to the "testsuite"
element.
Also added 2 new unit tests that just pass and fail to be
used for CI testing.
Change-Id: Ia137814b5aeb0e1a44c75034bd3615c26021da69
Add periodic beep option to one-touch recording by setting
the touch variable TOUCH_MONITOR_BEEP or
TOUCH_MIXMONITOR_BEEP to the desired interval in seconds.
If the interval is less than 5 seconds, a minimum of 5
seconds will be imposed. If the interval is set to an
invalid value, it will default to 15 seconds.
A new test event PERIODIC_HOOK_ENABLED was added to the
func_periodic_hook hook_on function to indicate when
a hook is started. This is so we can test that the touch
variable starts the hook as expected.
ASTERISK-30446
Change-Id: I800e494a789ba7a930bbdcd717e89d86040d6661
While it is possible to create multiple mixmonitor instances
on a channel, it was not previously possible to mute individual
instances.
This change includes the ability to specify the MixMonitorID
when calling the manager action: MixMonitorMute. This will
allow an individual MixMonitor instance to be muted via id.
This id can be stored as a channel variable using the 'i'
MixMonitor option.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor spy-type audiohooks on the channel.
This is done via the new audiohook function:
ast_audiohook_set_mute_all.
ASTERISK-30464
Change-Id: Ibba8c7e750577aa1595a24b23316ef445245be98
For 'core show channels', the Channel name field is increased
to 64 characters and the Location name field is increased to
32 characters.
For 'core show channels verbose', the Channel name field is
increased to 80 characters, the Context is increased to 24
characters and the Extension is increased to 24 characters.
ASTERISK-30455
Change-Id: Ibec3742ce360ffc93bc56e9984c2a21dabc4d5e1
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
ASTERISK-30437 #close
Change-Id: Ia79984b6377ef78f167ad9ea2ac084bec29955d0
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Change the HTTP status page (located at /httpstatus by default) by:
* Combining the address and port into a single line.
* Changing "SSL" to "TLS"
ASTERISK-30433 #close
Change-Id: Id2ccb1218f00a68424aca2b651647d8b1f549bcb
Make the existing CURL parameters configurable and allow
to specify the usable protocols, proxy and DNS timeout.
ASTERISK-30340
Change-Id: I2eb02ef44190e026716720419bcbdbcc8125777b
Phones moving between subnets on multi-homed server have their
initially connected interface IP cached in the SERVER variable,
even when it is not specified in the configuration files. This
prevents phones from obtaining the correct SERVER variable value
when they move to another subnet.
ASTERISK-30388 #close
Reported-by: cmaj
Change-Id: I1d18987a9d58e85556b4c4a6814ce7006524cc92
Adds 'e' option to allow Read() to return the terminator as the
dialed digits in the case where only the terminator is entered.
ie; if "#" is entered, return "#" if the 'e' option is set and ""
if it is not.
ASTERISK-30411
Change-Id: I49f3221824330a193a20c660f99da0f1fc2cbbc5
Adds 's' option to skip calling the extension and instead set the
extension as DIRECTORY_EXTEN channel variable.
ASTERISK-30405
Change-Id: Ib9d9db1ba5b7524594c640461b4aa8f752db8299
Adds a new option to SendDTMF() which will answer the specified
channel if it is not already up. If no channel is specified, the
current channel will be answered instead.
ASTERISK-30422
Change-Id: Iddcbd501fcdf9fef0f453b7a8115a90b11f1d085
Adds the Signal and WaitForSignal
applications, which can be used for inter-channel
signaling in the dialplan.
Signal supports sending a signal to other channels
listening for a signal of the same name, with an
optional data payload. The signal is received by
all channels waiting for that named signal.
ASTERISK-29810 #close
Change-Id: Ic34439de3d60f8609357666a465c354d81f5fef3
Adds support for arrays to JSON_DECODE by allowing the
user to print out entire arrays or index a particular
key or print the number of keys in a JSON array.
Additionally, adds support for recursively iterating a
JSON tree in a single function call, making it easier
to parse JSON results with multiple levels. A maximum
depth is imposed to prevent potentially blowing
the stack.
Also fixes a bug with the unit tests causing an empty
string to be printed instead of the actual test result.
ASTERISK-29913 #close
Change-Id: I603940b216a3911b498fc6583b18934011ef5d5b
Adds the overlap_context option, which can be used
to explicitly specify a context to use for overlap
dialing extension matches, rather than forcibly
using the context configured for the endpoint.
ASTERISK-30262 #close
Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db
In Asterisk 11, if a channel was redirected away during Playback(),
the PLAYBACKSTATUS variable would be set to SUCCESS. In Asterisk 12
(specifically commit 7d9871b394) that
behavior was inadvertently changed and the same operation would result
in the PLAYBACKSTATUS variable being set to FAILED. The Asterisk 11
behavior has been restored.
Partial fix for ASTERISK~25661.
Change-Id: I53f54e56b59b61c99403a481b6cb8d88b5a559ff
For most modules that interacted with app_macro, this change is limited
to no longer looking for the current context from the macrocontext when
set. Additionally, the following modules are impacted:
app_dial - no longer supports M^ connected/redirecting macro
app_minivm - samples written using macro will no longer work.
The sample needs a re-write
app_queue - can no longer a macro on the called party's channel.
Use gosub which is currently supported
ccss - no callback macro, gosub only
app_voicemail - no macro support
channel - remove macrocontext and priority, no connected line or
redirection macro options
options - stdexten is deprecated to gosub as the default and only
pbx - removed macrolock
pbx_dundi - no longer look for macro
snmp - removed macro context, exten, and priority
ASTERISK-30304
Change-Id: I830daab293117179b8d61bd4df0d971a1b3d07f6
Add ability to set HANGUPCAUSE when SIP causecode received in BYE (in addition to currently supported Q.850).
ASTERISK-30319 #close
Change-Id: I3f55622dc680ce713a2ffb5a458ef5dd39fcf645
-----------------
This commit reinstates MES with some casting fixes to the
functions in time.h that convert between doubles and timeval
structures. The casting issues were causing incorrect
timestamps to be calculated which caused transcoding from/to
G722 to produce bad or no audio.
ASTERISK-30391
-----------------
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
Change-Id: I4fce265965e68c3fdfeca55e614371ee69c65038
Adds a new application, Broadcast, which can be used for
one-to-many transmission and many-to-one reception of
channel audio in Asterisk. This is similar to ChanSpy,
except it is designed for multiple channel targets instead
of a single one. This can make certain kinds of audio
manipulation more efficient and streamlined. New kinds
of audio injection impossible with ChanSpy are also made
possible.
ASTERISK-30180 #close
Change-Id: I7ba72f765dbab9b58deeae028baca3f4f8377726
This removes the deprecated NoCDR application, which
was deprecated in Asterisk 12, having long been fully
superseded by the CDR_PROP function.
The deprecated e option to ResetCDR is also removed
for the same reason.
ASTERISK-30371 #close
Change-Id: Id9ed094d8e4baf98bcbc610035c2295bfafe9ec0
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
ASTERISK-30280
Change-Id: I458cb9a311e8e5dc1db769b8babbcf2e093f107a
This removes the ImportVar and SetAMAFlags applications
which have been deprecated since Asterisk 12, but were
never removed previously.
Additionally, it removes remnants of defunct options
that themselves were removed years ago.
ASTERISK-30335 #close
Change-Id: I749520c7b08d4c9d5eebbf640d4fbc81950eda8d
chan_sip supported sending AOC-D and AOC-E information in SIP INFO
messages in an "AOC" header in a format that was originally defined by
Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC
format that is supported by devices from multiple vendors, including
Snom phones with firmware >= 8.4.2 (released in 2010).
This commit adds a new res_pjsip_aoc module that inserts AOC information
into outgoing messages or sends SIP INFO messages as described below.
It also fixes a small issue in res_pjsip_session which didn't always
call session supplements on outgoing_response.
* AOC-S in the 180/183/200 responses to an INVITE request
* AOC-S in SIP INFO (if a 200 response has already been sent or if the
INVITE was sent by Asterisk)
* AOC-D in SIP INFO
* AOC-D in the 200 response to a BYE request (if the client hangs up)
* AOC-D in a BYE request (if Asterisk hangs up)
* AOC-E in the 200 response to a BYE request (if the client hangs up)
* AOC-E in a BYE request (if Asterisk hangs up)
The specification defines one more, AOC-S in an INVITE request, which
is not implemented here because it is not currently possible in
Asterisk to have AOC data ready at this point in call setup. Once
specifying AOC-S via the dialplan or passing it through from another
SIP channel's INVITE is possible, that might be added.
The SIP INFO requests are sent out immediately when the AOC indication
is received. The others are inserted into an appropriate outgoing
message whenever that is ready to be sent. In the latter case, the XML
is stored in a channel variable at the time the AOC indication is
received. Depending on where the AOC indications are coming from (e.g.
PRI or AMI), it may not always be possible to guarantee that the AOC-E
is available in time for the BYE.
Successfully tested AOC-D and both variants of AOC-E with a Snom D735
running firmware 10.1.127.10. It does not appear to properly support
AOC-S however, so that could only be tested by inspecting SIP traces.
ASTERISK-21502 #close
Reported-by: Matt Jordan <mjordan@digium.com>
Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333
Adds support for the capture agent name field
of the Homer protocol to Asterisk by allowing
users to specify a name that will be sent to
the HEP server.
ASTERISK-30322 #close
Change-Id: I6136583017f9dd08daeb8be02f60fb8df4639a2b
Adds the If, ElseIf, Else, ExitIf, and EndIf
applications for conditional execution
of a block of dialplan, similar to the While,
EndWhile, and ExitWhile applications. The
appropriate branch is executed at most once
if available and may be broken out of while
inside.
ASTERISK-29497
Change-Id: I3aa3bd35a5add82465c6ee9bd86b64601f0e1f49
Adds support for custom URI and header parameters
in the From header in PJSIP. Parameters can be
both set and read using this function.
ASTERISK-30150 #close
Change-Id: Ifb1bc3c512ad5f6faeaebd7817f004a2ecbd6428
msg_create_from_file currently does not dispatch emails,
which means that applications using this function, such
as MixMonitor, will not trigger notifications to users
(only AMI events are sent our currently). This is inconsistent
with other ways users can receive voicemail.
This is fixed by adding an option that attempts to send
an email and falling back to just the notifications as
done now if that fails. The existing behavior remains
the default.
ASTERISK-30283 #close
Change-Id: I597cbb9cf971a18d8776172b26ab187dc096a5c7
The XML docs are currently only loaded on
startup with no way to update them during runtime.
This makes it impossible to load modules that
use ACO/Sorcery (which require documentation)
if they are added to the source tree and built while
Asterisk is running (e.g. external modules).
This adds a CLI command to reload the XML docs
during runtime so that documentation can be updated
without a full restart of Asterisk.
ASTERISK-30289 #close
Change-Id: I4f265b0e5517e757c5453a0f241201a5788d3a07
MixMonitor currently uses the Connected Line as the Caller ID
for voicemails. This is due to the implementation being written
this way for use with Digium phones. However, in general this
is not correct for generic usage in the dialplan, and people
may need the real Caller ID instead. This adds an option to do that.
ASTERISK-30286 #close
Change-Id: I3d0ce76dfe75e2a614e0f709ab27acbd2478267c
Add live_dangerously flag to manager and use this flag to
determine if a configuation file outside of AST_CONFIG_DIR
should be read.
ASTERISK-30176
Change-Id: I46b26af4047433b49ae5c8a85cb8cda806a07404
(cherry picked from commit 81f10e847e)
The Answer application currently waits for up to 500ms
for media, even if users specify a different timeout.
This adds an option to not wait for media on the channel
by doing a raw answer instead. The default 500ms threshold
is also documented.
ASTERISK-30308 #close
Change-Id: Id59cd340c44b8b8b2384c479e17e5123e917cba4
Currently, chan_dahdi will wait for at least one
ring before an incoming call can enter the dialplan.
This is generally necessary in order to receive
the Caller ID spill and/or distinctive ringing
detection.
However, if neither of these is required, then there
is nothing gained by waiting for one ring and this
unnecessarily delays call setup. Users can now
use immediate=yes to make FXO channels (FXS signaled)
begin processing dialplan as soon as Asterisk receives
the call.
ASTERISK-30305 #close
Change-Id: I20818b370b2e4892c7f40c8a8753fa06a81750b5
Adds an option that allows MixMonitor to delete
its copy of any recording files before exiting.
This can be handy in conjunction with options
like m, which copy the file elsewhere, and the
original files may no longer be needed.
ASTERISK-30284 #close
Change-Id: Ida093679c67e300efc154a97b6d8ec0f104e581e
If multiple codecs are available for the same
resource and the translation costs between
multiple codecs are the same, ties are
currently broken arbitrarily, which means a
lower quality codec would be used. This forces
Asterisk to explicitly use the higher quality
codec, ceteris paribus.
ASTERISK-29455
Change-Id: I4b7297e1baca7aac14fe4a3c7538e18e2dbe9fd6
Naveen Albert
George Joseph
InterLinked1
Sean Bright
Joshua Colp
Mike Bradeen
Jaco Kroon
Boris P. Korzun
Holger Hans Peter Freyther
cmaj
Sean Bright
Igor Goncharovsky
George Joseph
Michael Kuron