/* * (C) Copyright 2010-2011 * NVIDIA Corporation * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include "../tegra-common/cpu.h" /* Returns 1 if the current CPU executing is a Cortex-A9, else 0 */ int ap20_cpu_is_cortexa9(void) { u32 id = readb(NV_PA_PG_UP_BASE + PG_UP_TAG_0); return id == (PG_UP_TAG_0_PID_CPU & 0xff); } void init_pllx(void) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_XCPU]; u32 reg; /* If PLLX is already enabled, just return */ if (readl(&pll->pll_base) & PLL_ENABLE_MASK) return; /* Set PLLX_MISC */ writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc); /* Use 12MHz clock here */ reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT); reg |= 1000 << PLL_DIVN_SHIFT; writel(reg, &pll->pll_base); reg |= PLL_ENABLE_MASK; writel(reg, &pll->pll_base); reg &= ~PLL_BYPASS_MASK; writel(reg, &pll->pll_base); } static void enable_cpu_clock(int enable) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; u32 clk; /* * NOTE: * Regardless of whether the request is to enable or disable the CPU * clock, every processor in the CPU complex except the master (CPU 0) * will have it's clock stopped because the AVP only talks to the * master. The AVP does not know (nor does it need to know) that there * are multiple processors in the CPU complex. */ if (enable) { /* Initialize PLLX */ init_pllx(); /* Wait until all clocks are stable */ udelay(PLL_STABILIZATION_DELAY); writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol); writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div); } /* * Read the register containing the individual CPU clock enables and * always stop the clock to CPU 1. */ clk = readl(&clkrst->crc_clk_cpu_cmplx); clk |= 1 << CPU1_CLK_STP_SHIFT; /* Stop/Unstop the CPU clock */ clk &= ~CPU0_CLK_STP_MASK; clk |= !enable << CPU0_CLK_STP_SHIFT; writel(clk, &clkrst->crc_clk_cpu_cmplx); clock_enable(PERIPH_ID_CPU); } static int is_cpu_powered(void) { struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0; } static void remove_cpu_io_clamps(void) { struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; u32 reg; /* Remove the clamps on the CPU I/O signals */ reg = readl(&pmc->pmc_remove_clamping); reg |= CPU_CLMP; writel(reg, &pmc->pmc_remove_clamping); /* Give I/O signals time to stabilize */ udelay(IO_STABILIZATION_DELAY); } static void powerup_cpu(void) { struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; u32 reg; int timeout = IO_STABILIZATION_DELAY; if (!is_cpu_powered()) { /* Toggle the CPU power state (OFF -> ON) */ reg = readl(&pmc->pmc_pwrgate_toggle); reg &= PARTID_CP; reg |= START_CP; writel(reg, &pmc->pmc_pwrgate_toggle); /* Wait for the power to come up */ while (!is_cpu_powered()) { if (timeout-- == 0) printf("CPU failed to power up!\n"); else udelay(10); } /* * Remove the I/O clamps from CPU power partition. * Recommended only on a Warm boot, if the CPU partition gets * power gated. Shouldn't cause any harm when called after a * cold boot according to HW, probably just redundant. */ remove_cpu_io_clamps(); } } static void enable_cpu_power_rail(void) { struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; u32 reg; reg = readl(&pmc->pmc_cntrl); reg |= CPUPWRREQ_OE; writel(reg, &pmc->pmc_cntrl); /* * The TI PMU65861C needs a 3.75ms delay between enabling * the power rail and enabling the CPU clock. This delay * between SM1EN and SM1 is for switching time + the ramp * up of the voltage to the CPU (VDD_CPU from PMU). */ udelay(3750); } static void reset_A9_cpu(int reset) { /* * NOTE: Regardless of whether the request is to hold the CPU in reset * or take it out of reset, every processor in the CPU complex * except the master (CPU 0) will be held in reset because the * AVP only talks to the master. The AVP does not know that there * are multiple processors in the CPU complex. */ /* Hold CPU 1 in reset, and CPU 0 if asked */ reset_cmplx_set_enable(1, crc_rst_cpu | crc_rst_de | crc_rst_debug, 1); reset_cmplx_set_enable(0, crc_rst_cpu | crc_rst_de | crc_rst_debug, reset); /* Enable/Disable master CPU reset */ reset_set_enable(PERIPH_ID_CPU, reset); } static void clock_enable_coresight(int enable) { u32 rst, src; clock_set_enable(PERIPH_ID_CORESIGHT, enable); reset_set_enable(PERIPH_ID_CORESIGHT, !enable); if (enable) { /* * Put CoreSight on PLLP_OUT0 (216 MHz) and divide it down by * 1.5, giving an effective frequency of 144MHz. * Set PLLP_OUT0 [bits31:30 = 00], and use a 7.1 divisor * (bits 7:0), so 00000001b == 1.5 (n+1 + .5) */ src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000); clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src); /* Unlock the CPU CoreSight interfaces */ rst = 0xC5ACCE55; writel(rst, CSITE_CPU_DBG0_LAR); writel(rst, CSITE_CPU_DBG1_LAR); } } void start_cpu(u32 reset_vector) { /* Enable VDD_CPU */ enable_cpu_power_rail(); /* Hold the CPUs in reset */ reset_A9_cpu(1); /* Disable the CPU clock */ enable_cpu_clock(0); /* Enable CoreSight */ clock_enable_coresight(1); /* * Set the entry point for CPU execution from reset, * if it's a non-zero value. */ if (reset_vector) writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); /* Enable the CPU clock */ enable_cpu_clock(1); /* If the CPU doesn't already have power, power it up */ powerup_cpu(); /* Take the CPU out of reset */ reset_A9_cpu(0); } void halt_avp(void) { for (;;) { writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \ | HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)), FLOW_CTLR_HALT_COP_EVENTS); } }