mx6: add mmdc configuration for MX6Q/MX6DL
- add function for configuring iomux based on board-specific regs - add function for configuring mmdc based on board-specific and chip-specific data Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
This commit is contained in:
Tim Harvey
Stefano Babic
parent
8d05b161fc
commit
fe0f7f7842
|
|
@ -8,4 +8,5 @@
|
|||
#
|
||||
|
||||
obj-y := soc.o clock.o
|
||||
obj-$(CONFIG_SPL_BUILD) += ddr.o
|
||||
obj-$(CONFIG_SECURE_BOOT) += hab.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,490 @@
|
|||
/*
|
||||
* Copyright (C) 2014 Gateworks Corporation
|
||||
* Author: Tim Harvey <tharvey@gateworks.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <linux/types.h>
|
||||
#include <asm/arch/mx6-ddr.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/types.h>
|
||||
|
||||
#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
|
||||
/* Configure MX6DQ mmdc iomux */
|
||||
void mx6dq_dram_iocfg(unsigned width,
|
||||
const struct mx6dq_iomux_ddr_regs *ddr,
|
||||
const struct mx6dq_iomux_grp_regs *grp)
|
||||
{
|
||||
volatile struct mx6dq_iomux_ddr_regs *mx6_ddr_iomux;
|
||||
volatile struct mx6dq_iomux_grp_regs *mx6_grp_iomux;
|
||||
|
||||
mx6_ddr_iomux = (struct mx6dq_iomux_ddr_regs *)MX6DQ_IOM_DDR_BASE;
|
||||
mx6_grp_iomux = (struct mx6dq_iomux_grp_regs *)MX6DQ_IOM_GRP_BASE;
|
||||
|
||||
/* DDR IO Type */
|
||||
mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
|
||||
mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
|
||||
|
||||
/* Clock */
|
||||
mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
|
||||
mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
|
||||
|
||||
/* Address */
|
||||
mx6_ddr_iomux->dram_cas = ddr->dram_cas;
|
||||
mx6_ddr_iomux->dram_ras = ddr->dram_ras;
|
||||
mx6_grp_iomux->grp_addds = grp->grp_addds;
|
||||
|
||||
/* Control */
|
||||
mx6_ddr_iomux->dram_reset = ddr->dram_reset;
|
||||
mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
|
||||
mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
|
||||
mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
|
||||
mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
|
||||
mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
|
||||
mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
|
||||
|
||||
/* Data Strobes */
|
||||
mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
|
||||
mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
|
||||
mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
|
||||
if (width >= 32) {
|
||||
mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
|
||||
mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
|
||||
}
|
||||
if (width >= 64) {
|
||||
mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
|
||||
mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
|
||||
mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
|
||||
mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
|
||||
}
|
||||
|
||||
/* Data */
|
||||
mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
|
||||
mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
|
||||
mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
|
||||
if (width >= 32) {
|
||||
mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
|
||||
mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
|
||||
}
|
||||
if (width >= 64) {
|
||||
mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
|
||||
mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
|
||||
mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
|
||||
mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
|
||||
}
|
||||
mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
|
||||
mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
|
||||
if (width >= 32) {
|
||||
mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
|
||||
mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
|
||||
}
|
||||
if (width >= 64) {
|
||||
mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
|
||||
mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
|
||||
mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
|
||||
mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
|
||||
/* Configure MX6SDL mmdc iomux */
|
||||
void mx6sdl_dram_iocfg(unsigned width,
|
||||
const struct mx6sdl_iomux_ddr_regs *ddr,
|
||||
const struct mx6sdl_iomux_grp_regs *grp)
|
||||
{
|
||||
volatile struct mx6sdl_iomux_ddr_regs *mx6_ddr_iomux;
|
||||
volatile struct mx6sdl_iomux_grp_regs *mx6_grp_iomux;
|
||||
|
||||
mx6_ddr_iomux = (struct mx6sdl_iomux_ddr_regs *)MX6SDL_IOM_DDR_BASE;
|
||||
mx6_grp_iomux = (struct mx6sdl_iomux_grp_regs *)MX6SDL_IOM_GRP_BASE;
|
||||
|
||||
/* DDR IO Type */
|
||||
mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
|
||||
mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
|
||||
|
||||
/* Clock */
|
||||
mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
|
||||
mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
|
||||
|
||||
/* Address */
|
||||
mx6_ddr_iomux->dram_cas = ddr->dram_cas;
|
||||
mx6_ddr_iomux->dram_ras = ddr->dram_ras;
|
||||
mx6_grp_iomux->grp_addds = grp->grp_addds;
|
||||
|
||||
/* Control */
|
||||
mx6_ddr_iomux->dram_reset = ddr->dram_reset;
|
||||
mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
|
||||
mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
|
||||
mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
|
||||
mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
|
||||
mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
|
||||
mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
|
||||
|
||||
/* Data Strobes */
|
||||
mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
|
||||
mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
|
||||
mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
|
||||
if (width >= 32) {
|
||||
mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
|
||||
mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
|
||||
}
|
||||
if (width >= 64) {
|
||||
mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
|
||||
mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
|
||||
mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
|
||||
mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
|
||||
}
|
||||
|
||||
/* Data */
|
||||
mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
|
||||
mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
|
||||
mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
|
||||
if (width >= 32) {
|
||||
mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
|
||||
mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
|
||||
}
|
||||
if (width >= 64) {
|
||||
mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
|
||||
mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
|
||||
mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
|
||||
mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
|
||||
}
|
||||
mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
|
||||
mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
|
||||
if (width >= 32) {
|
||||
mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
|
||||
mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
|
||||
}
|
||||
if (width >= 64) {
|
||||
mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
|
||||
mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
|
||||
mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
|
||||
mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Configure mx6 mmdc registers based on:
|
||||
* - board-specific memory configuration
|
||||
* - board-specific calibration data
|
||||
* - ddr3 chip details
|
||||
*
|
||||
* The various calculations here are derived from the Freescale
|
||||
* i.Mx6DQSDL DDR3 Script Aid spreadsheet (DOC-94917) designed to generate MMDC
|
||||
* configuration registers based on memory system and memory chip parameters.
|
||||
*
|
||||
* The defaults here are those which were specified in the spreadsheet.
|
||||
* For details on each register, refer to the IMX6DQRM and/or IMX6SDLRM
|
||||
* section titled MMDC initialization
|
||||
*/
|
||||
#define MR(val, ba, cmd, cs1) \
|
||||
((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
|
||||
void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
|
||||
const struct mx6_mmdc_calibration *c,
|
||||
const struct mx6_ddr3_cfg *m)
|
||||
{
|
||||
volatile struct mmdc_p_regs *mmdc0;
|
||||
volatile struct mmdc_p_regs *mmdc1;
|
||||
u32 reg;
|
||||
u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd;
|
||||
u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl;
|
||||
u8 todt_idle_off = 0x4; /* from DDR3 Script Aid spreadsheet */
|
||||
u16 trcd, trc, tras, twr, tmrd, trtp, trp, twtr, trfc, txs, txpr;
|
||||
u16 CS0_END;
|
||||
u16 tdllk = 0x1ff; /* DLL locking time: 512 cycles (JEDEC DDR3) */
|
||||
int clkper; /* clock period in picoseconds */
|
||||
int clock; /* clock freq in mHz */
|
||||
int cs;
|
||||
|
||||
mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
|
||||
mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
|
||||
|
||||
/* MX6D/MX6Q: 1066 MHz memory clock, clkper = 1.894ns = 1894ps */
|
||||
if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
|
||||
clock = 528;
|
||||
tcwl = 4;
|
||||
}
|
||||
/* MX6S/MX6DL: 800 MHz memory clock, clkper = 2.5ns = 2500ps */
|
||||
else {
|
||||
clock = 400;
|
||||
tcwl = 3;
|
||||
}
|
||||
clkper = (1000*1000)/clock; /* ps */
|
||||
todtlon = tcwl;
|
||||
taxpd = tcwl;
|
||||
tanpd = tcwl;
|
||||
tcwl = tcwl;
|
||||
|
||||
switch (m->density) {
|
||||
case 1: /* 1Gb per chip */
|
||||
trfc = DIV_ROUND_UP(110000, clkper) - 1;
|
||||
txs = DIV_ROUND_UP(120000, clkper) - 1;
|
||||
break;
|
||||
case 2: /* 2Gb per chip */
|
||||
trfc = DIV_ROUND_UP(160000, clkper) - 1;
|
||||
txs = DIV_ROUND_UP(170000, clkper) - 1;
|
||||
break;
|
||||
case 4: /* 4Gb per chip */
|
||||
trfc = DIV_ROUND_UP(260000, clkper) - 1;
|
||||
txs = DIV_ROUND_UP(270000, clkper) - 1;
|
||||
break;
|
||||
case 8: /* 8Gb per chip */
|
||||
trfc = DIV_ROUND_UP(350000, clkper) - 1;
|
||||
txs = DIV_ROUND_UP(360000, clkper) - 1;
|
||||
break;
|
||||
default:
|
||||
/* invalid density */
|
||||
printf("invalid chip density\n");
|
||||
hang();
|
||||
break;
|
||||
}
|
||||
txpr = txs;
|
||||
|
||||
switch (m->mem_speed) {
|
||||
case 800:
|
||||
txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
|
||||
tcke = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
|
||||
if (m->pagesz == 1) {
|
||||
tfaw = DIV_ROUND_UP(40000, clkper) - 1;
|
||||
trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
|
||||
} else {
|
||||
tfaw = DIV_ROUND_UP(50000, clkper) - 1;
|
||||
trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
|
||||
}
|
||||
break;
|
||||
case 1066:
|
||||
txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
|
||||
tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
|
||||
if (m->pagesz == 1) {
|
||||
tfaw = DIV_ROUND_UP(37500, clkper) - 1;
|
||||
trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
|
||||
} else {
|
||||
tfaw = DIV_ROUND_UP(50000, clkper) - 1;
|
||||
trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
|
||||
}
|
||||
break;
|
||||
case 1333:
|
||||
txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
|
||||
tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
|
||||
if (m->pagesz == 1) {
|
||||
tfaw = DIV_ROUND_UP(30000, clkper) - 1;
|
||||
trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
|
||||
} else {
|
||||
tfaw = DIV_ROUND_UP(45000, clkper) - 1;
|
||||
trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
|
||||
}
|
||||
break;
|
||||
case 1600:
|
||||
txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
|
||||
tcke = DIV_ROUND_UP(MAX(3*clkper, 5000), clkper) - 1;
|
||||
if (m->pagesz == 1) {
|
||||
tfaw = DIV_ROUND_UP(30000, clkper) - 1;
|
||||
trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
|
||||
} else {
|
||||
tfaw = DIV_ROUND_UP(40000, clkper) - 1;
|
||||
trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
printf("invalid memory speed\n");
|
||||
hang();
|
||||
break;
|
||||
}
|
||||
txpdll = DIV_ROUND_UP(MAX(10*clkper, 24000), clkper) - 1;
|
||||
tcl = DIV_ROUND_UP(m->trcd, clkper/10) - 3;
|
||||
tcksre = DIV_ROUND_UP(MAX(5*clkper, 10000), clkper);
|
||||
tcksrx = tcksre;
|
||||
taonpd = DIV_ROUND_UP(2000, clkper) - 1;
|
||||
taofpd = taonpd;
|
||||
trp = DIV_ROUND_UP(m->trcd, clkper/10) - 1;
|
||||
trcd = trp;
|
||||
trc = DIV_ROUND_UP(m->trcmin, clkper/10) - 1;
|
||||
tras = DIV_ROUND_UP(m->trasmin, clkper/10) - 1;
|
||||
twr = DIV_ROUND_UP(15000, clkper) - 1;
|
||||
tmrd = DIV_ROUND_UP(MAX(12*clkper, 15000), clkper) - 1;
|
||||
twtr = ROUND(MAX(4*clkper, 7500)/clkper, 1) - 1;
|
||||
trtp = twtr;
|
||||
CS0_END = ((4*i->cs_density) <= 120) ? (4*i->cs_density)+7 : 127;
|
||||
debug("density:%d Gb (%d Gb per chip)\n", i->cs_density, m->density);
|
||||
debug("clock: %dMHz (%d ps)\n", clock, clkper);
|
||||
debug("memspd:%d\n", m->mem_speed);
|
||||
debug("tcke=%d\n", tcke);
|
||||
debug("tcksrx=%d\n", tcksrx);
|
||||
debug("tcksre=%d\n", tcksre);
|
||||
debug("taofpd=%d\n", taofpd);
|
||||
debug("taonpd=%d\n", taonpd);
|
||||
debug("todtlon=%d\n", todtlon);
|
||||
debug("tanpd=%d\n", tanpd);
|
||||
debug("taxpd=%d\n", taxpd);
|
||||
debug("trfc=%d\n", trfc);
|
||||
debug("txs=%d\n", txs);
|
||||
debug("txp=%d\n", txp);
|
||||
debug("txpdll=%d\n", txpdll);
|
||||
debug("tfaw=%d\n", tfaw);
|
||||
debug("tcl=%d\n", tcl);
|
||||
debug("trcd=%d\n", trcd);
|
||||
debug("trp=%d\n", trp);
|
||||
debug("trc=%d\n", trc);
|
||||
debug("tras=%d\n", tras);
|
||||
debug("twr=%d\n", twr);
|
||||
debug("tmrd=%d\n", tmrd);
|
||||
debug("tcwl=%d\n", tcwl);
|
||||
debug("tdllk=%d\n", tdllk);
|
||||
debug("trtp=%d\n", trtp);
|
||||
debug("twtr=%d\n", twtr);
|
||||
debug("trrd=%d\n", trrd);
|
||||
debug("txpr=%d\n", txpr);
|
||||
debug("CS0_END=%d\n", CS0_END);
|
||||
debug("ncs=%d\n", i->ncs);
|
||||
debug("Rtt_wr=%d\n", i->rtt_wr);
|
||||
debug("Rtt_nom=%d\n", i->rtt_nom);
|
||||
debug("SRT=%d\n", m->SRT);
|
||||
debug("tcl=%d\n", tcl);
|
||||
debug("twr=%d\n", twr);
|
||||
|
||||
/*
|
||||
* board-specific configuration:
|
||||
* These values are determined empirically and vary per board layout
|
||||
* see:
|
||||
* appnote, ddr3 spreadsheet
|
||||
*/
|
||||
mmdc0->mpwldectrl0 = c->p0_mpwldectrl0;
|
||||
mmdc0->mpwldectrl1 = c->p0_mpwldectrl1;
|
||||
mmdc0->mpdgctrl0 = c->p0_mpdgctrl0;
|
||||
mmdc0->mpdgctrl1 = c->p0_mpdgctrl1;
|
||||
mmdc0->mprddlctl = c->p0_mprddlctl;
|
||||
mmdc0->mpwrdlctl = c->p0_mpwrdlctl;
|
||||
if (i->dsize > 1) {
|
||||
mmdc1->mpwldectrl0 = c->p1_mpwldectrl0;
|
||||
mmdc1->mpwldectrl1 = c->p1_mpwldectrl1;
|
||||
mmdc1->mpdgctrl0 = c->p1_mpdgctrl0;
|
||||
mmdc1->mpdgctrl1 = c->p1_mpdgctrl1;
|
||||
mmdc1->mprddlctl = c->p1_mprddlctl;
|
||||
mmdc1->mpwrdlctl = c->p1_mpwrdlctl;
|
||||
}
|
||||
|
||||
/* Read data DQ Byte0-3 delay */
|
||||
mmdc0->mprddqby0dl = (u32)0x33333333;
|
||||
mmdc0->mprddqby1dl = (u32)0x33333333;
|
||||
if (i->dsize > 0) {
|
||||
mmdc0->mprddqby2dl = (u32)0x33333333;
|
||||
mmdc0->mprddqby3dl = (u32)0x33333333;
|
||||
}
|
||||
if (i->dsize > 1) {
|
||||
mmdc1->mprddqby0dl = (u32)0x33333333;
|
||||
mmdc1->mprddqby1dl = (u32)0x33333333;
|
||||
mmdc1->mprddqby2dl = (u32)0x33333333;
|
||||
mmdc1->mprddqby3dl = (u32)0x33333333;
|
||||
}
|
||||
|
||||
/* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */
|
||||
reg = (i->rtt_nom == 2) ? 0x00011117 : 0x00022227;
|
||||
mmdc0->mpodtctrl = reg;
|
||||
if (i->dsize > 1)
|
||||
mmdc1->mpodtctrl = reg;
|
||||
|
||||
/* complete calibration */
|
||||
reg = (1 << 11); /* Force measurement on delay-lines */
|
||||
mmdc0->mpmur0 = reg;
|
||||
if (i->dsize > 1)
|
||||
mmdc1->mpmur0 = reg;
|
||||
|
||||
/* Step 1: configuration request */
|
||||
mmdc0->mdscr = (u32)(1 << 15); /* config request */
|
||||
|
||||
/* Step 2: Timing configuration */
|
||||
reg = (trfc << 24) | (txs << 16) | (txp << 13) | (txpdll << 9) |
|
||||
(tfaw << 4) | tcl;
|
||||
mmdc0->mdcfg0 = reg;
|
||||
reg = (trcd << 29) | (trp << 26) | (trc << 21) | (tras << 16) |
|
||||
(1 << 15) | /* trpa */
|
||||
(twr << 9) | (tmrd << 5) | tcwl;
|
||||
mmdc0->mdcfg1 = reg;
|
||||
reg = (tdllk << 16) | (trtp << 6) | (twtr << 3) | trrd;
|
||||
mmdc0->mdcfg2 = reg;
|
||||
reg = (taofpd << 27) | (taonpd << 24) | (tanpd << 20) | (taxpd << 16) |
|
||||
(todtlon << 12) | (todt_idle_off << 4);
|
||||
mmdc0->mdotc = reg;
|
||||
mmdc0->mdasp = CS0_END; /* CS addressing */
|
||||
|
||||
/* Step 3: Configure DDR type */
|
||||
reg = (i->cs1_mirror << 19) | (i->walat << 16) | (i->bi_on << 12) |
|
||||
(i->mif3_mode << 9) | (i->ralat << 6);
|
||||
mmdc0->mdmisc = reg;
|
||||
|
||||
/* Step 4: Configure delay while leaving reset */
|
||||
reg = (txpr << 16) | (i->sde_to_rst << 8) | (i->rst_to_cke << 0);
|
||||
mmdc0->mdor = reg;
|
||||
|
||||
/* Step 5: Configure DDR physical parameters (density and burst len) */
|
||||
reg = (m->rowaddr - 11) << 24 | /* ROW */
|
||||
(m->coladdr - 9) << 20 | /* COL */
|
||||
(1 << 19) | /* Burst Length = 8 for DDR3 */
|
||||
(i->dsize << 16); /* DDR data bus size */
|
||||
mmdc0->mdctl = reg;
|
||||
|
||||
/* Step 6: Perform ZQ calibration */
|
||||
reg = (u32)0xa1390001; /* one-time HW ZQ calib */
|
||||
mmdc0->mpzqhwctrl = reg;
|
||||
if (i->dsize > 1)
|
||||
mmdc1->mpzqhwctrl = reg;
|
||||
|
||||
/* Step 7: Enable MMDC with desired chip select */
|
||||
reg = mmdc0->mdctl |
|
||||
(1 << 31) | /* SDE_0 for CS0 */
|
||||
((i->ncs == 2) ? 1 : 0) << 30; /* SDE_1 for CS1 */
|
||||
mmdc0->mdctl = reg;
|
||||
|
||||
/* Step 8: Write Mode Registers to Init DDR3 devices */
|
||||
for (cs = 0; cs < i->ncs; cs++) {
|
||||
/* MR2 */
|
||||
reg = (i->rtt_wr & 3) << 9 | (m->SRT & 1) << 7 |
|
||||
((tcwl - 3) & 3) << 3;
|
||||
mmdc0->mdscr = (u32)MR(reg, 2, 3, cs);
|
||||
/* MR3 */
|
||||
mmdc0->mdscr = (u32)MR(0, 3, 3, cs);
|
||||
/* MR1 */
|
||||
reg = ((i->rtt_nom & 1) ? 1 : 0) << 2 |
|
||||
((i->rtt_nom & 2) ? 1 : 0) << 6;
|
||||
mmdc0->mdscr = (u32)MR(reg, 1, 3, cs);
|
||||
reg = ((tcl - 1) << 4) | /* CAS */
|
||||
(1 << 8) | /* DLL Reset */
|
||||
((twr - 3) << 9); /* Write Recovery */
|
||||
/* MR0 */
|
||||
mmdc0->mdscr = (u32)MR(reg, 0, 3, cs);
|
||||
/* ZQ calibration */
|
||||
reg = (1 << 10);
|
||||
mmdc0->mdscr = (u32)MR(reg, 0, 4, cs);
|
||||
}
|
||||
|
||||
/* Step 10: Power down control and self-refresh */
|
||||
reg = (tcke & 0x7) << 16 |
|
||||
5 << 12 | /* PWDT_1: 256 cycles */
|
||||
5 << 8 | /* PWDT_0: 256 cycles */
|
||||
1 << 6 | /* BOTH_CS_PD */
|
||||
(tcksrx & 0x7) << 3 |
|
||||
(tcksre & 0x7);
|
||||
mmdc0->mdpdc = reg;
|
||||
mmdc0->mapsr = (u32)0x00011006; /* ADOPT power down enabled */
|
||||
|
||||
/* Step 11: Configure ZQ calibration: one-time and periodic 1ms */
|
||||
mmdc0->mpzqhwctrl = (u32)0xa1390003;
|
||||
if (i->dsize > 1)
|
||||
mmdc1->mpzqhwctrl = (u32)0xa1390003;
|
||||
|
||||
/* Step 12: Configure and activate periodic refresh */
|
||||
reg = (1 << 14) | /* REF_SEL: Periodic refresh cycles of 32kHz */
|
||||
(7 << 11); /* REFR: Refresh Rate - 8 refreshes */
|
||||
mmdc0->mdref = reg;
|
||||
|
||||
/* Step 13: Deassert config request - init complete */
|
||||
mmdc0->mdscr = (u32)0x00000000;
|
||||
|
||||
/* wait for auto-ZQ calibration to complete */
|
||||
mdelay(1);
|
||||
}
|
||||
|
|
@ -173,6 +173,78 @@ struct mx6sdl_iomux_grp_regs {
|
|||
u32 res4;
|
||||
u32 grp_b6ds;
|
||||
};
|
||||
|
||||
/* Device Information: Varies per DDR3 part number and speed grade */
|
||||
struct mx6_ddr3_cfg {
|
||||
u16 mem_speed; /* ie 1600 for DDR3-1600 (800,1066,1333,1600) */
|
||||
u8 density; /* chip density (Gb) (1,2,4,8) */
|
||||
u8 width; /* bus width (bits) (4,8,16) */
|
||||
u8 banks; /* number of banks */
|
||||
u8 rowaddr; /* row address bits (11-16)*/
|
||||
u8 coladdr; /* col address bits (9-12) */
|
||||
u8 pagesz; /* page size (K) (1-2) */
|
||||
u16 trcd; /* tRCD=tRP=CL (ns*100) */
|
||||
u16 trcmin; /* tRC min (ns*100) */
|
||||
u16 trasmin; /* tRAS min (ns*100) */
|
||||
u8 SRT; /* self-refresh temperature: 0=normal, 1=extended */
|
||||
};
|
||||
|
||||
/* System Information: Varies per board design, layout, and term choices */
|
||||
struct mx6_ddr_sysinfo {
|
||||
u8 dsize; /* size of bus (in dwords: 0=16bit,1=32bit,2=64bit) */
|
||||
u8 cs_density; /* density per chip select (Gb) */
|
||||
u8 ncs; /* number chip selects used (1|2) */
|
||||
char cs1_mirror;/* enable address mirror (0|1) */
|
||||
char bi_on; /* Bank interleaving enable */
|
||||
u8 rtt_nom; /* Rtt_Nom (DDR3_RTT_*) */
|
||||
u8 rtt_wr; /* Rtt_Wr (DDR3_RTT_*) */
|
||||
u8 ralat; /* Read Additional Latency (0-7) */
|
||||
u8 walat; /* Write Additional Latency (0-3) */
|
||||
u8 mif3_mode; /* Command prediction working mode */
|
||||
u8 rst_to_cke; /* Time from SDE enable to CKE rise */
|
||||
u8 sde_to_rst; /* Time from SDE enable until DDR reset# is high */
|
||||
};
|
||||
|
||||
/*
|
||||
* Board specific calibration:
|
||||
* This includes write leveling calibration values as well as DQS gating
|
||||
* and read/write delays. These values are board/layout/device specific.
|
||||
* Freescale recommends using the i.MX6 DDR Stress Test Tool V1.0.2
|
||||
* (DOC-96412) to determine these values over a range of boards and
|
||||
* temperatures.
|
||||
*/
|
||||
struct mx6_mmdc_calibration {
|
||||
/* write leveling calibration */
|
||||
u32 p0_mpwldectrl0;
|
||||
u32 p0_mpwldectrl1;
|
||||
u32 p1_mpwldectrl0;
|
||||
u32 p1_mpwldectrl1;
|
||||
/* read DQS gating */
|
||||
u32 p0_mpdgctrl0;
|
||||
u32 p0_mpdgctrl1;
|
||||
u32 p1_mpdgctrl0;
|
||||
u32 p1_mpdgctrl1;
|
||||
/* read delay */
|
||||
u32 p0_mprddlctl;
|
||||
u32 p1_mprddlctl;
|
||||
/* write delay */
|
||||
u32 p0_mpwrdlctl;
|
||||
u32 p1_mpwrdlctl;
|
||||
};
|
||||
|
||||
/* configure iomux (pinctl/padctl) */
|
||||
void mx6dq_dram_iocfg(unsigned width,
|
||||
const struct mx6dq_iomux_ddr_regs *,
|
||||
const struct mx6dq_iomux_grp_regs *);
|
||||
void mx6sdl_dram_iocfg(unsigned width,
|
||||
const struct mx6sdl_iomux_ddr_regs *,
|
||||
const struct mx6sdl_iomux_grp_regs *);
|
||||
|
||||
/* configure mx6 mmdc registers */
|
||||
void mx6_dram_cfg(const struct mx6_ddr_sysinfo *,
|
||||
const struct mx6_mmdc_calibration *,
|
||||
const struct mx6_ddr3_cfg *);
|
||||
|
||||
#endif /* CONFIG_SPL_BUILD */
|
||||
|
||||
#define MX6_MMDC_P0_MDCTL 0x021b0000
|
||||
|
|
|
|||
Loading…
Reference in New Issue