sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

Merge branch 'master' of git://git.denx.de/u-boot-arm 

Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and
serial.

Conflicts:
	arch/arm/dts/exynos5250.dtsi

Signed-off-by: Tom Rini <trini@ti.com>
This commit is contained in:
Tom Rini 2013-07-12 10:36:48 -04:00
parent d72da15828 efc284e325
commit fbbbc86e8e
118 changed files with 5291 additions and 2356 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
CREDITS
View File

@ -124,6 +124,10 @@ N: James F. Dougherty
E: jfd@GigabitNetworks.COM
D: Port to the MOUSSE board
N: Mike Dunn
E: mikedunn@newsguy.com
D: Palmtreo680 board, docg4 nand flash driver
N: Dave Ellis
E: DGE@sixnetio.com
D: EEPROM Speedup, SXNI855T port

7
MAINTAINERS
View File

@ -651,6 +651,9 @@ Wolfgang Denk <wd@denx.de>
imx27lite i.MX27
qong i.MX31
Mike Dunn <mikedunn@newsguy.com>
palmtreo680 pxa270
Kristoffer Ericson <kristoffer.ericson@gmail.com>
jornada SA1110
@ -662,9 +665,9 @@ Fabio Estevam <fabio.estevam@freescale.com>
mx31pdk i.MX31
mx53ard i.MX53
mx53smd i.MX53
mx6qsabresd i.MX6Q
mx6sabresd i.MX6Q/DL
mx6qsabreauto i.MX6Q
wandboard i.MX6DL/S
wandboard i.MX6DL/S/Q
mx6slevk i.MX6SL
Daniel Gorsulowski <daniel.gorsulowski@esd.eu>

10
arch/arm/cpu/arm926ejs/mx27/generic.c
View File

@ -159,6 +159,8 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
switch (clk) {
case MXC_ARM_CLK:
return imx_get_armclk();
case MXC_I2C_CLK:
return imx_get_ahbclk()/2;
case MXC_UART_CLK:
return imx_get_perclk1();
case MXC_FEC_CLK:
@ -380,3 +382,11 @@ void mx27_sd2_init_pins(void)
}
#endif /* CONFIG_MXC_MMC */
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif /* CONFIG_SYS_DCACHE_OFF */

15
arch/arm/cpu/armv7/exynos/Makefile
View File

@ -22,10 +22,19 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
COBJS += clock.o power.o soc.o system.o pinmux.o tzpc.o
COBJS-y += clock.o power.o soc.o system.o pinmux.o tzpc.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
ifdef CONFIG_SPL_BUILD
COBJS-$(CONFIG_EXYNOS5) += clock_init_exynos5.o
COBJS-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o
COBJS-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o
COBJS-y += spl_boot.o
COBJS-y += lowlevel_init.o
endif
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
all: $(obj).depend $(LIB)

43
arch/arm/cpu/armv7/exynos/clock.c
View File

@ -27,6 +27,10 @@
#include <asm/arch/clk.h>
#include <asm/arch/periph.h>
#define PLL_DIV_1024 1024
#define PLL_DIV_65535 65535
#define PLL_DIV_65536 65536
/* *
* This structure is to store the src bit, div bit and prediv bit
* positions of the peripheral clocks of the src and div registers
@ -85,6 +89,7 @@ static struct set_epll_con_val exynos5_epll_div[] = {
static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
{
unsigned long m, p, s = 0, mask, fout;
unsigned int div;
unsigned int freq;
/*
* APLL_CON: MIDV [25:16]
@ -110,14 +115,42 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
if (pllreg == EPLL) {
k = k & 0xffff;
/* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */
fout = (m + k / 65536) * (freq / (p * (1 << s)));
fout = (m + k / PLL_DIV_65536) * (freq / (p * (1 << s)));
} else if (pllreg == VPLL) {
k = k & 0xfff;
/* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */
fout = (m + k / 1024) * (freq / (p * (1 << s)));
/*
* Exynos4210
* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV)
*
* Exynos4412
* FOUT = (MDIV + K / 65535) * FIN / (PDIV * 2^SDIV)
*
* Exynos5250
* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV)
*/
if (proid_is_exynos4210())
div = PLL_DIV_1024;
else if (proid_is_exynos4412())
div = PLL_DIV_65535;
else if (proid_is_exynos5250())
div = PLL_DIV_65536;
else
return 0;
fout = (m + k / div) * (freq / (p * (1 << s)));
} else {
/* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
fout = m * (freq / (p * (1 << s)));
/*
* Exynos4210
* FOUT = MDIV * FIN / (PDIV * 2^SDIV)
*
* Exynos4412 / Exynos5250
* FOUT = MDIV * FIN / (PDIV * 2^(SDIV-1))
*/
if (proid_is_exynos4210())
fout = m * (freq / (p * (1 << s)));
else
fout = m * (freq / (p * (1 << (s - 1))));
}
return fout;

0
board/samsung/smdk5250/clock_init.h → arch/arm/cpu/armv7/exynos/clock_init.h
View File

95
arch/arm/cpu/armv7/exynos/clock_init_exynos4.c Normal file
View File

@ -0,0 +1,95 @@
/*
* Clock Initialization for board based on EXYNOS4210
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#include <version.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clk.h>
#include <asm/arch/clock.h>
#include "common_setup.h"
#include "exynos4_setup.h"
/*
* system_clock_init: Initialize core clock and bus clock.
* void system_clock_init(void)
*/
void system_clock_init(void)
{
struct exynos4_clock *clk =
(struct exynos4_clock *)samsung_get_base_clock();
writel(CLK_SRC_CPU_VAL, &clk->src_cpu);
sdelay(0x10000);
writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
writel(CLK_SRC_DMC_VAL, &clk->src_dmc);
writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus);
writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus);
writel(CLK_SRC_FSYS_VAL, &clk->src_fsys);
writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0);
writel(CLK_SRC_CAM_VAL, &clk->src_cam);
writel(CLK_SRC_MFC_VAL, &clk->src_mfc);
writel(CLK_SRC_G3D_VAL, &clk->src_g3d);
writel(CLK_SRC_LCD0_VAL, &clk->src_lcd0);
sdelay(0x10000);
writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0);
writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0);
writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1);
writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus);
writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus);
writel(CLK_DIV_TOP_VAL, &clk->div_top);
writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3);
writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0);
writel(CLK_DIV_CAM_VAL, &clk->div_cam);
writel(CLK_DIV_MFC_VAL, &clk->div_mfc);
writel(CLK_DIV_G3D_VAL, &clk->div_g3d);
writel(CLK_DIV_LCD0_VAL, &clk->div_lcd0);
/* Set PLL locktime */
writel(PLL_LOCKTIME, &clk->apll_lock);
writel(PLL_LOCKTIME, &clk->mpll_lock);
writel(PLL_LOCKTIME, &clk->epll_lock);
writel(PLL_LOCKTIME, &clk->vpll_lock);
writel(APLL_CON1_VAL, &clk->apll_con1);
writel(APLL_CON0_VAL, &clk->apll_con0);
writel(MPLL_CON1_VAL, &clk->mpll_con1);
writel(MPLL_CON0_VAL, &clk->mpll_con0);
writel(EPLL_CON1_VAL, &clk->epll_con1);
writel(EPLL_CON0_VAL, &clk->epll_con0);
writel(VPLL_CON1_VAL, &clk->vpll_con1);
writel(VPLL_CON0_VAL, &clk->vpll_con0);
sdelay(0x30000);
}

56
board/samsung/smdk5250/clock_init.c → arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
View File

@ -31,7 +31,8 @@
#include <asm/arch/dwmmc.h>
#include "clock_init.h"
#include "setup.h"
#include "common_setup.h"
#include "exynos5_setup.h"
#define FSYS1_MMC0_DIV_MASK 0xff0f
#define FSYS1_MMC0_DIV_VAL 0x0701
@ -214,10 +215,10 @@ struct mem_timings mem_timings[] = {
DMC_MEMCONTROL_BL_8 |
DMC_MEMCONTROL_PZQ_DISABLE |
DMC_MEMCONTROL_MRR_BYTE_7_0,
.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
DMC_MEMCONFIGx_CHIP_COL_10 |
DMC_MEMCONFIGx_CHIP_ROW_15 |
DMC_MEMCONFIGx_CHIP_BANK_8,
.memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
DMC_MEMCONFIGX_CHIP_COL_10 |
DMC_MEMCONFIGX_CHIP_ROW_15 |
DMC_MEMCONFIGX_CHIP_BANK_8,
.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
.prechconfig_tp_cnt = 0xff,
@ -317,10 +318,10 @@ struct mem_timings mem_timings[] = {
DMC_MEMCONTROL_BL_8 |
DMC_MEMCONTROL_PZQ_DISABLE |
DMC_MEMCONTROL_MRR_BYTE_7_0,
.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
DMC_MEMCONFIGx_CHIP_COL_10 |
DMC_MEMCONFIGx_CHIP_ROW_15 |
DMC_MEMCONFIGx_CHIP_BANK_8,
.memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
DMC_MEMCONFIGX_CHIP_COL_10 |
DMC_MEMCONFIGX_CHIP_ROW_15 |
DMC_MEMCONFIGX_CHIP_BANK_8,
.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
.prechconfig_tp_cnt = 0xff,
@ -350,9 +351,8 @@ struct mem_timings mem_timings[] = {
* @param frequency_mhz Returns memory speed in MHz
* @param arm_freq Returns ARM clock speed in MHz
* @param mem_manuf Return Memory Manufacturer name
* @return 0 if all ok
*/
static int clock_get_mem_selection(enum ddr_mode *mem_type,
static void clock_get_mem_selection(enum ddr_mode *mem_type,
unsigned *frequency_mhz, unsigned *arm_freq,
enum mem_manuf *mem_manuf)
{
@ -363,8 +363,6 @@ static int clock_get_mem_selection(enum ddr_mode *mem_type,
*frequency_mhz = params->frequency_mhz;
*arm_freq = params->arm_freq_mhz;
*mem_manuf = params->mem_manuf;
return 0;
}
/* Get the ratios for setting ARM clock */
@ -376,9 +374,9 @@ struct arm_clk_ratios *get_arm_ratios(void)
unsigned frequency_mhz, arm_freq;
int i;
if (clock_get_mem_selection(&mem_type, &frequency_mhz,
&arm_freq, &mem_manuf))
;
clock_get_mem_selection(&mem_type, &frequency_mhz,
&arm_freq, &mem_manuf);
for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
i++, arm_ratio++) {
if (arm_ratio->arm_freq_mhz == arm_freq)
@ -400,15 +398,14 @@ struct mem_timings *clock_get_mem_timings(void)
unsigned frequency_mhz, arm_freq;
int i;
if (!clock_get_mem_selection(&mem_type, &frequency_mhz,
&arm_freq, &mem_manuf)) {
for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
i++, mem++) {
if (mem->mem_type == mem_type &&
mem->frequency_mhz == frequency_mhz &&
mem->mem_manuf == mem_manuf)
return mem;
}
clock_get_mem_selection(&mem_type, &frequency_mhz,
&arm_freq, &mem_manuf);
for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
i++, mem++) {
if (mem->mem_type == mem_type &&
mem->frequency_mhz == frequency_mhz &&
mem->mem_manuf == mem_manuf)
return mem;
}
/* will hang if failed to find memory timings */
@ -420,7 +417,8 @@ struct mem_timings *clock_get_mem_timings(void)
void system_clock_init()
{
struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
struct mem_timings *mem;
struct arm_clk_ratios *arm_clk_ratio;
u32 val, tmp;
@ -660,7 +658,8 @@ void system_clock_init()
void clock_init_dp_clock(void)
{
struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
/* DP clock enable */
setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW);
@ -675,7 +674,8 @@ void clock_init_dp_clock(void)
*/
void emmc_boot_clk_div_set(void)
{
struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
unsigned int div_mmc;
div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;

45
arch/arm/cpu/armv7/exynos/common_setup.h Normal file
View File

@ -0,0 +1,45 @@
/*
* Common APIs for EXYNOS based board
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#define DMC_OFFSET 0x10000
/*
* Memory initialization
*
* @param reset Reset PHY during initialization.
*/
void mem_ctrl_init(int reset);
/* System Clock initialization */
void system_clock_init(void);
/*
* Init subsystems according to the reset status
*
* @return 0 for a normal boot, non-zero for a resume
*/
int do_lowlevel_init(void);
void sdelay(unsigned long);

7
board/samsung/smdk5250/dmc_common.c → arch/arm/cpu/armv7/exynos/dmc_common.c
View File

@ -26,7 +26,8 @@
#include <asm/arch/spl.h>
#include "clock_init.h"
#include "setup.h"
#include "common_setup.h"
#include "exynos5_setup.h"
#define ZQ_INIT_TIMEOUT 10000
@ -175,7 +176,7 @@ void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc)
writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1);
}
void mem_ctrl_init()
void mem_ctrl_init(int reset)
{
struct spl_machine_param *param = spl_get_machine_params();
struct mem_timings *mem;
@ -185,7 +186,7 @@ void mem_ctrl_init()
/* If there are any other memory variant, add their init call below */
if (param->mem_type == DDR_MODE_DDR3) {
ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size);
ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size, reset);
if (ret) {
/* will hang if failed to init memory control */
while (1)

27
board/samsung/smdk5250/dmc_init_ddr3.c → arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
View File

@ -27,31 +27,36 @@
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dmc.h>
#include "setup.h"
#include "common_setup.h"
#include "exynos5_setup.h"
#include "clock_init.h"
#define RDLVL_COMPLETE_TIMEOUT 10000
static void reset_phy_ctrl(void)
{
struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl);
writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl);
}
int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)
int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
int reset)
{
unsigned int val;
struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
struct exynos5_dmc *dmc;
int i;
phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE;
phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE;
dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE;
phy0_ctrl = (struct exynos5_phy_control *)samsung_get_base_dmc_phy();
phy1_ctrl = (struct exynos5_phy_control *)(samsung_get_base_dmc_phy()
+ DMC_OFFSET);
dmc = (struct exynos5_dmc *)samsung_get_base_dmc_ctrl();
reset_phy_ctrl();
if (reset)
reset_phy_ctrl();
/* Set Impedance Output Driver */
val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) |
@ -100,14 +105,14 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)
/* Start DLL locking */
writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
&phy0_ctrl->phy_con12);
&phy0_ctrl->phy_con12);
writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
&phy1_ctrl->phy_con12);
&phy1_ctrl->phy_con12);
update_reset_dll(dmc, DDR_MODE_DDR3);
writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
&dmc->concontrol);
&dmc->concontrol);
/* Memory Channel Inteleaving Size */
writel(mem->iv_size, &dmc->ivcontrol);
@ -119,7 +124,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)
/* Precharge Configuration */
writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
&dmc->prechconfig);
&dmc->prechconfig);
/* Power Down mode Configuration */
writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT |

213
arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c Normal file
View File

@ -0,0 +1,213 @@
/*
* Memory setup for board based on EXYNOS4210
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <asm/arch/dmc.h>
#include "common_setup.h"
#include "exynos4_setup.h"
struct mem_timings mem = {
.direct_cmd_msr = {
DIRECT_CMD1, DIRECT_CMD2, DIRECT_CMD3, DIRECT_CMD4
},
.timingref = TIMINGREF_VAL,
.timingrow = TIMINGROW_VAL,
.timingdata = TIMINGDATA_VAL,
.timingpower = TIMINGPOWER_VAL,
.zqcontrol = ZQ_CONTROL_VAL,
.control0 = CONTROL0_VAL,
.control1 = CONTROL1_VAL,
.control2 = CONTROL2_VAL,
.concontrol = CONCONTROL_VAL,
.prechconfig = PRECHCONFIG,
.memcontrol = MEMCONTROL_VAL,
.memconfig0 = MEMCONFIG0_VAL,
.memconfig1 = MEMCONFIG1_VAL,
.dll_resync = FORCE_DLL_RESYNC,
.dll_on = DLL_CONTROL_ON,
};
static void phy_control_reset(int ctrl_no, struct exynos4_dmc *dmc)
{
if (ctrl_no) {
writel((mem.control1 | (1 << mem.dll_resync)),
&dmc->phycontrol1);
writel((mem.control1 | (0 << mem.dll_resync)),
&dmc->phycontrol1);
} else {
writel((mem.control0 | (0 << mem.dll_on)),
&dmc->phycontrol0);
writel((mem.control0 | (1 << mem.dll_on)),
&dmc->phycontrol0);
}
}
static void dmc_config_mrs(struct exynos4_dmc *dmc, int chip)
{
int i;
unsigned long mask = 0;
if (chip)
mask = DIRECT_CMD_CHIP1_SHIFT;
for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
writel(mem.direct_cmd_msr[i] | mask,
&dmc->directcmd);
}
}
static void dmc_init(struct exynos4_dmc *dmc)
{
/*
* DLL Parameter Setting:
* Termination: Enable R/W
* Phase Delay for DQS Cleaning: 180' Shift
*/
writel(mem.control1, &dmc->phycontrol1);
/*
* ZQ Calibration
* Termination: Disable
* Auto Calibration Start: Enable
*/
writel(mem.zqcontrol, &dmc->phyzqcontrol);
sdelay(0x100000);
/*
* Update DLL Information:
* Force DLL Resyncronization
*/
phy_control_reset(1, dmc);
phy_control_reset(0, dmc);
/* Set DLL Parameters */
writel(mem.control1, &dmc->phycontrol1);
/* DLL Start */
writel((mem.control0 | CTRL_START | CTRL_DLL_ON), &dmc->phycontrol0);
writel(mem.control2, &dmc->phycontrol2);
/* Set Clock Ratio of Bus clock to Memory Clock */
writel(mem.concontrol, &dmc->concontrol);
/*
* Memor Burst length: 8
* Number of chips: 2
* Memory Bus width: 32 bit
* Memory Type: DDR3
* Additional Latancy for PLL: 1 Cycle
*/
writel(mem.memcontrol, &dmc->memcontrol);
writel(mem.memconfig0, &dmc->memconfig0);
writel(mem.memconfig1, &dmc->memconfig1);
/* Config Precharge Policy */
writel(mem.prechconfig, &dmc->prechconfig);
/*
* TimingAref, TimingRow, TimingData, TimingPower Setting:
* Values as per Memory AC Parameters
*/
writel(mem.timingref, &dmc->timingref);
writel(mem.timingrow, &dmc->timingrow);
writel(mem.timingdata, &dmc->timingdata);
writel(mem.timingpower, &dmc->timingpower);
/* Chip0: NOP Command: Assert and Hold CKE to high level */
writel(DIRECT_CMD_NOP, &dmc->directcmd);
sdelay(0x100000);
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
dmc_config_mrs(dmc, 0);
sdelay(0x100000);
/* Chip0: ZQINIT */
writel(DIRECT_CMD_ZQ, &dmc->directcmd);
sdelay(0x100000);
writel((DIRECT_CMD_NOP | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
sdelay(0x100000);
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
dmc_config_mrs(dmc, 1);
sdelay(0x100000);
/* Chip1: ZQINIT */
writel((DIRECT_CMD_ZQ | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
sdelay(0x100000);
phy_control_reset(1, dmc);
sdelay(0x100000);
/* turn on DREX0, DREX1 */
writel((mem.concontrol | AREF_EN), &dmc->concontrol);
}
void mem_ctrl_init(int reset)
{
struct exynos4_dmc *dmc;
/*
* Async bridge configuration at CPU_core:
* 1: half_sync
* 0: full_sync
*/
writel(1, ASYNC_CONFIG);
#ifdef CONFIG_ORIGEN
/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
APB_SFR_INTERLEAVE_CONF_OFFSET);
/* Update MIU Configuration */
writel(APB_SFR_ARBRITATION_CONF_VAL, EXYNOS4_MIU_BASE +
APB_SFR_ARBRITATION_CONF_OFFSET);
#else
writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
APB_SFR_INTERLEAVE_CONF_OFFSET);
writel(INTERLEAVE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET);
writel(INTERLEAVE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET);
writel(INTERLEAVE_ADDR_MAP_EN, EXYNOS4_MIU_BASE +
ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
#ifdef CONFIG_MIU_LINEAR
writel(SLAVE0_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET);
writel(SLAVE0_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET);
writel(SLAVE1_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET);
writel(SLAVE1_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET);
writel(APB_SFR_SLV_ADDR_MAP_CONF_VAL, EXYNOS4_MIU_BASE +
ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
#endif
#endif
/* DREX0 */
dmc = (struct exynos4_dmc *)samsung_get_base_dmc_ctrl();
dmc_init(dmc);
dmc = (struct exynos4_dmc *)(samsung_get_base_dmc_ctrl()
+ DMC_OFFSET);
dmc_init(dmc);
}

395
board/samsung/origen/origen_setup.h → arch/arm/cpu/armv7/exynos/exynos4_setup.h
View File

@ -1,5 +1,5 @@
/*
* Machine Specific Values for ORIGEN board based on S5PV310
* Machine Specific Values for EXYNOS4012 based board
*
* Copyright (C) 2011 Samsung Electronics
*
@ -29,98 +29,22 @@
#include <version.h>
#include <asm/arch/cpu.h>
/* Offsets of clock registers (sources and dividers) */
#define CLK_SRC_CPU_OFFSET 0x14200
#define CLK_DIV_CPU0_OFFSET 0x14500
#define CLK_DIV_CPU1_OFFSET 0x14504
#define CLK_SRC_DMC_OFFSET 0x10200
#define CLK_DIV_DMC0_OFFSET 0x10500
#define CLK_DIV_DMC1_OFFSET 0x10504
#define CLK_SRC_TOP0_OFFSET 0xC210
#define CLK_SRC_TOP1_OFFSET 0xC214
#define CLK_DIV_TOP_OFFSET 0xC510
#define CLK_SRC_LEFTBUS_OFFSET 0x4200
#define CLK_DIV_LEFTBUS_OFFSET 0x4500
#define CLK_SRC_RIGHTBUS_OFFSET 0x8200
#define CLK_DIV_RIGHTBUS_OFFSET 0x8500
#define CLK_SRC_FSYS_OFFSET 0xC240
#define CLK_DIV_FSYS1_OFFSET 0xC544
#define CLK_DIV_FSYS2_OFFSET 0xC548
#define CLK_DIV_FSYS3_OFFSET 0xC54C
#define CLK_SRC_CAM_OFFSET 0xC220
#define CLK_SRC_TV_OFFSET 0xC224
#define CLK_SRC_MFC_OFFSET 0xC228
#define CLK_SRC_G3D_OFFSET 0xC22C
#define CLK_SRC_LCD0_OFFSET 0xC234
#define CLK_SRC_PERIL0_OFFSET 0xC250
#define CLK_DIV_CAM_OFFSET 0xC520
#define CLK_DIV_TV_OFFSET 0xC524
#define CLK_DIV_MFC_OFFSET 0xC528
#define CLK_DIV_G3D_OFFSET 0xC52C
#define CLK_DIV_LCD0_OFFSET 0xC534
#define CLK_DIV_PERIL0_OFFSET 0xC550
#define CLK_SRC_LCD0_OFFSET 0xC234
#define APLL_LOCK_OFFSET 0x14000
#define MPLL_LOCK_OFFSET 0x14008
#define APLL_CON0_OFFSET 0x14100
#define APLL_CON1_OFFSET 0x14104
#define MPLL_CON0_OFFSET 0x14108
#define MPLL_CON1_OFFSET 0x1410C
#define EPLL_LOCK_OFFSET 0xC010
#define VPLL_LOCK_OFFSET 0xC020
#define EPLL_CON0_OFFSET 0xC110
#define EPLL_CON1_OFFSET 0xC114
#define VPLL_CON0_OFFSET 0xC120
#define VPLL_CON1_OFFSET 0xC124
/* DMC: DRAM Controllor Register offsets */
#define DMC_CONCONTROL 0x00
#define DMC_MEMCONTROL 0x04
#define DMC_MEMCONFIG0 0x08
#define DMC_MEMCONFIG1 0x0C
#define DMC_DIRECTCMD 0x10
#define DMC_PRECHCONFIG 0x14
#define DMC_PHYCONTROL0 0x18
#define DMC_PHYCONTROL1 0x1C
#define DMC_PHYCONTROL2 0x20
#define DMC_TIMINGAREF 0x30
#define DMC_TIMINGROW 0x34
#define DMC_TIMINGDATA 0x38
#define DMC_TIMINGPOWER 0x3C
#define DMC_PHYZQCONTROL 0x44
#ifdef CONFIG_CLK_800_330_165
#define DRAM_CLK_330
#endif
#ifdef CONFIG_CLK_1000_200_200
#define DRAM_CLK_200
#endif
#ifdef CONFIG_CLK_1000_330_165
#define DRAM_CLK_330
#endif
#ifdef CONFIG_CLK_1000_400_200
#define DRAM_CLK_400
#endif
/* Bus Configuration Register Address */
#define ASYNC_CONFIG 0x10010350
/* MIU Config Register Offsets*/
#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
/* Offset for inform registers */
#define INFORM0_OFFSET 0x800
#define INFORM1_OFFSET 0x804
/* GPIO Offsets for UART: GPIO Contol Register */
#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00
#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20
/* UART Register offsets */
#define ULCON_OFFSET 0x00
#define UCON_OFFSET 0x04
#define UFCON_OFFSET 0x08
#define UBRDIV_OFFSET 0x28
#define UFRACVAL_OFFSET 0x2C
/* CLK_SRC_CPU */
#define MUX_HPM_SEL_MOUTAPLL 0x0
#define MUX_HPM_SEL_SCLKMPLL 0x1
@ -485,123 +409,186 @@
| (VPLL_MRR << 24) \
| (VPLL_MFR << 16) \
| (VPLL_K << 0))
/*
* UART GPIO_A0/GPIO_A1 Control Register Value
* 0x2: UART Function
*/
#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222
#define EXYNOS4_GPIO_A1_CON_VAL 0x222222
/* ULCON: UART Line Control Value 8N1 */
#define WORD_LEN_5_BIT 0x00
#define WORD_LEN_6_BIT 0x01
#define WORD_LEN_7_BIT 0x02
#define WORD_LEN_8_BIT 0x03
/* DMC */
#define DIRECT_CMD_NOP 0x07000000
#define DIRECT_CMD_ZQ 0x0a000000
#define DIRECT_CMD_CHIP1_SHIFT (1 << 20)
#define MEM_TIMINGS_MSR_COUNT 4
#define CTRL_START (1 << 0)
#define CTRL_DLL_ON (1 << 1)
#define AREF_EN (1 << 5)
#define DRV_TYPE (1 << 6)
#define STOP_BIT_1 0x00
#define STOP_BIT_2 0x01
struct mem_timings {
unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
unsigned timingref;
unsigned timingrow;
unsigned timingdata;
unsigned timingpower;
unsigned zqcontrol;
unsigned control0;
unsigned control1;
unsigned control2;
unsigned concontrol;
unsigned prechconfig;
unsigned memcontrol;
unsigned memconfig0;
unsigned memconfig1;
unsigned dll_resync;
unsigned dll_on;
};
#define NO_PARITY 0x00
#define ODD_PARITY 0x4
#define EVEN_PARITY 0x5
#define FORCED_PARITY_CHECK_AS_1 0x6
#define FORCED_PARITY_CHECK_AS_0 0x7
/* MIU */
/* MIU Config Register Offsets*/
#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
#define ABP_SFR_SLV_ADDRMAP_CONF_OFFSET 0x800
#define ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET 0x808
#define ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET 0x810
#define ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET 0x818
#define ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET 0x820
#define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET 0x828
#define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET 0x830
#define INFRAMODE_NORMAL 0x00
#define INFRAMODE_INFRARED 0x01
#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \
| (NO_PARITY << 3) \
| (STOP_BIT_1 << 2) \
| (WORD_LEN_8_BIT << 0))
/*
* UCON: UART Control Value
* Tx_interrupt Type: Level
* Rx_interrupt Type: Level
* Rx Timeout Enabled: Yes
* Rx-Error Atatus_Int Enable: Yes
* Loop_Back: No
* Break Signal: No
* Transmit mode : Interrupt request/polling
* Receive mode : Interrupt request/polling
*/
#define TX_PULSE_INTERRUPT 0
#define TX_LEVEL_INTERRUPT 1
#define RX_PULSE_INTERRUPT 0
#define RX_LEVEL_INTERRUPT 1
#define RX_TIME_OUT ENABLE
#define RX_ERROR_STATE_INT_ENB ENABLE
#define LOOP_BACK DISABLE
#define BREAK_SIGNAL DISABLE
#define TX_MODE_DISABLED 0X00
#define TX_MODE_IRQ_OR_POLL 0X01
#define TX_MODE_DMA 0X02
#define RX_MODE_DISABLED 0X00
#define RX_MODE_IRQ_OR_POLL 0X01
#define RX_MODE_DMA 0X02
#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \
| (RX_LEVEL_INTERRUPT << 8) \
| (RX_TIME_OUT << 7) \
| (RX_ERROR_STATE_INT_ENB << 6) \
| (LOOP_BACK << 5) \
| (BREAK_SIGNAL << 4) \
| (TX_MODE_IRQ_OR_POLL << 2) \
| (RX_MODE_IRQ_OR_POLL << 0))
/*
* UFCON: UART FIFO Control Value
* Tx FIFO Trigger LEVEL: 2 Bytes (001)
* Rx FIFO Trigger LEVEL: 2 Bytes (001)
* Tx Fifo Reset: No
* Rx Fifo Reset: No
* FIFO Enable: Yes
*/
#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00
#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1
#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2
#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3
#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4
#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5
#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6
#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7
#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0
#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1
#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2
#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3
#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4
#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5
#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6
#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7
#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES
#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES
#define TX_FIFO_RESET DISABLE
#define RX_FIFO_RESET DISABLE
#define FIFO_ENABLE ENABLE
#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \
| (RX_FIFO_TRIGGER_LEVEL << 4) \
| (TX_FIFO_RESET << 2) \
| (RX_FIFO_RESET << 1) \
| (FIFO_ENABLE << 0))
/*
* Baud Rate Division Value
* 115200 BAUD:
* UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1)
* UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1)
*/
#define UBRDIV_VAL 0x35
/*
* Fractional Part of Baud Rate Divisor:
* 115200 BAUD:
* UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10)
* UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
*/
#define UFRACVAL_VAL 0x4
#ifdef CONFIG_ORIGEN
/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
#define APB_SFR_INTERLEAVE_CONF_VAL 0x20001507
#define APB_SFR_ARBRITATION_CONF_VAL 0x00000001
#endif
#define INTERLEAVE_ADDR_MAP_START_ADDR 0x40000000
#define INTERLEAVE_ADDR_MAP_END_ADDR 0xbfffffff
#define INTERLEAVE_ADDR_MAP_EN 0x00000001
#ifdef CONFIG_MIU_1BIT_INTERLEAVED
/* Interleave_bit0: 0xC*/
#define APB_SFR_INTERLEAVE_CONF_VAL 0x0000000c
#endif
#ifdef CONFIG_MIU_2BIT_INTERLEAVED
/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0xc */
#define APB_SFR_INTERLEAVE_CONF_VAL 0x2000150c
#endif
#define SLAVE0_SINGLE_ADDR_MAP_START_ADDR 0x40000000
#define SLAVE0_SINGLE_ADDR_MAP_END_ADDR 0x7fffffff
#define SLAVE1_SINGLE_ADDR_MAP_START_ADDR 0x80000000
#define SLAVE1_SINGLE_ADDR_MAP_END_ADDR 0xbfffffff
/* Enable SME0 and SME1*/
#define APB_SFR_SLV_ADDR_MAP_CONF_VAL 0x00000006
#define FORCE_DLL_RESYNC 3
#define DLL_CONTROL_ON 1
#define DIRECT_CMD1 0x00020000
#define DIRECT_CMD2 0x00030000
#define DIRECT_CMD3 0x00010002
#define DIRECT_CMD4 0x00000328
#define CTRL_ZQ_MODE_NOTERM (0x1 << 0)
#define CTRL_ZQ_START (0x1 << 1)
#define CTRL_ZQ_DIV (0 << 4)
#define CTRL_ZQ_MODE_DDS (0x7 << 8)
#define CTRL_ZQ_MODE_TERM (0x2 << 11)
#define CTRL_ZQ_FORCE_IMPN (0x5 << 14)
#define CTRL_ZQ_FORCE_IMPP (0x6 << 17)
#define CTRL_DCC (0xE38 << 20)
#define ZQ_CONTROL_VAL (CTRL_ZQ_MODE_NOTERM | CTRL_ZQ_START\
| CTRL_ZQ_DIV | CTRL_ZQ_MODE_DDS\
| CTRL_ZQ_MODE_TERM | CTRL_ZQ_FORCE_IMPN\
| CTRL_ZQ_FORCE_IMPP | CTRL_DCC)
#define ASYNC (0 << 0)
#define CLK_RATIO (1 << 1)
#define DIV_PIPE (1 << 3)
#define AWR_ON (1 << 4)
#define AREF_DISABLE (0 << 5)
#define DRV_TYPE_DISABLE (0 << 6)
#define CHIP0_NOT_EMPTY (0 << 8)
#define CHIP1_NOT_EMPTY (0 << 9)
#define DQ_SWAP_DISABLE (0 << 10)
#define QOS_FAST_DISABLE (0 << 11)
#define RD_FETCH (0x3 << 12)
#define TIMEOUT_LEVEL0 (0xFFF << 16)
#define CONCONTROL_VAL (ASYNC | CLK_RATIO | DIV_PIPE | AWR_ON\
| AREF_DISABLE | DRV_TYPE_DISABLE\
| CHIP0_NOT_EMPTY | CHIP1_NOT_EMPTY\
| DQ_SWAP_DISABLE | QOS_FAST_DISABLE\
| RD_FETCH | TIMEOUT_LEVEL0)
#define CLK_STOP_DISABLE (0 << 1)
#define DPWRDN_DISABLE (0 << 2)
#define DPWRDN_TYPE (0 << 3)
#define TP_DISABLE (0 << 4)
#define DSREF_DIABLE (0 << 5)
#define ADD_LAT_PALL (1 << 6)
#define MEM_TYPE_DDR3 (0x6 << 8)
#define MEM_WIDTH_32 (0x2 << 12)
#define NUM_CHIP_2 (1 << 16)
#define BL_8 (0x3 << 20)
#define MEMCONTROL_VAL (CLK_STOP_DISABLE | DPWRDN_DISABLE\
| DPWRDN_TYPE | TP_DISABLE | DSREF_DIABLE\
| ADD_LAT_PALL | MEM_TYPE_DDR3 | MEM_WIDTH_32\
| NUM_CHIP_2 | BL_8)
#define CHIP_BANK_8 (0x3 << 0)
#define CHIP_ROW_14 (0x2 << 4)
#define CHIP_COL_10 (0x3 << 8)
#define CHIP_MAP_INTERLEAVED (1 << 12)
#define CHIP_MASK (0xe0 << 16)
#ifdef CONFIG_MIU_LINEAR
#define CHIP0_BASE (0x40 << 24)
#define CHIP1_BASE (0x60 << 24)
#else
#define CHIP0_BASE (0x20 << 24)
#define CHIP1_BASE (0x40 << 24)
#endif
#define MEMCONFIG0_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
| CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP0_BASE)
#define MEMCONFIG1_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
| CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP1_BASE)
#define TP_CNT (0xff << 24)
#define PRECHCONFIG TP_CNT
#define CTRL_OFF (0 << 0)
#define CTRL_DLL_OFF (0 << 1)
#define CTRL_HALF (0 << 2)
#define CTRL_DFDQS (1 << 3)
#define DQS_DELAY (0 << 4)
#define CTRL_START_POINT (0x10 << 8)
#define CTRL_INC (0x10 << 16)
#define CTRL_FORCE (0x71 << 24)
#define CONTROL0_VAL (CTRL_OFF | CTRL_DLL_OFF | CTRL_HALF\
| CTRL_DFDQS | DQS_DELAY | CTRL_START_POINT\
| CTRL_INC | CTRL_FORCE)
#define CTRL_SHIFTC (0x6 << 0)
#define CTRL_REF (8 << 4)
#define CTRL_SHGATE (1 << 29)
#define TERM_READ_EN (1 << 30)
#define TERM_WRITE_EN (1 << 31)
#define CONTROL1_VAL (CTRL_SHIFTC | CTRL_REF | CTRL_SHGATE\
| TERM_READ_EN | TERM_WRITE_EN)
#define CONTROL2_VAL 0x00000000
#ifdef CONFIG_ORIGEN
#define TIMINGREF_VAL 0x000000BB
#define TIMINGROW_VAL 0x4046654f
#define TIMINGDATA_VAL 0x46400506
#define TIMINGPOWER_VAL 0x52000A3C
#else
#define TIMINGREF_VAL 0x000000BC
#ifdef DRAM_CLK_330
#define TIMINGROW_VAL 0x3545548d
#define TIMINGDATA_VAL 0x45430506
#define TIMINGPOWER_VAL 0x4439033c
#endif
#ifdef DRAM_CLK_400
#define TIMINGROW_VAL 0x45430506
#define TIMINGDATA_VAL 0x56500506
#define TIMINGPOWER_VAL 0x5444033d
#endif
#endif
#endif

26
board/samsung/smdk5250/setup.h → arch/arm/cpu/armv7/exynos/exynos5_setup.h
View File

@ -93,17 +93,17 @@
#define DMC_MEMCONTROL_MRR_BYTE_31_24 (3 << 25)
/* MEMCONFIG0 register bit fields */
#define DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED (1 << 12)
#define DMC_MEMCONFIGx_CHIP_COL_10 (3 << 8)
#define DMC_MEMCONFIGx_CHIP_ROW_14 (2 << 4)
#define DMC_MEMCONFIGx_CHIP_ROW_15 (3 << 4)
#define DMC_MEMCONFIGx_CHIP_BANK_8 (3 << 0)
#define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED (1 << 12)
#define DMC_MEMCONFIGX_CHIP_COL_10 (3 << 8)
#define DMC_MEMCONFIGX_CHIP_ROW_14 (2 << 4)
#define DMC_MEMCONFIGX_CHIP_ROW_15 (3 << 4)
#define DMC_MEMCONFIGX_CHIP_BANK_8 (3 << 0)
#define DMC_MEMBASECONFIGx_CHIP_BASE(x) (x << 16)
#define DMC_MEMBASECONFIGx_CHIP_MASK(x) (x << 0)
#define DMC_MEMBASECONFIGX_CHIP_BASE(x) (x << 16)
#define DMC_MEMBASECONFIGX_CHIP_MASK(x) (x << 0)
#define DMC_MEMBASECONFIG_VAL(x) ( \
DMC_MEMBASECONFIGx_CHIP_BASE(x) | \
DMC_MEMBASECONFIGx_CHIP_MASK(0x780) \
DMC_MEMBASECONFIGX_CHIP_BASE(x) | \
DMC_MEMBASECONFIGX_CHIP_MASK(0x780) \
)
#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40)
@ -513,9 +513,11 @@ enum {
* which the DMC uses to decide how to split a memory
* chunk into smaller chunks to support concurrent
* accesses; may vary across boards.
* @param reset Reset DDR PHY during initialization.
* @return 0 if ok, SETUP_ERR_... if there is a problem
*/
int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size);
int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
int reset);
/*
* Configure ZQ I/O interface
@ -562,8 +564,4 @@ void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc);
* @param ddr_mode Type of DDR memory
*/
void update_reset_dll(struct exynos5_dmc *, enum ddr_mode);
void sdelay(unsigned long);
void mem_ctrl_init(void);
void system_clock_init(void);
#endif

73
arch/arm/cpu/armv7/exynos/lowlevel_init.c Normal file
View File

@ -0,0 +1,73 @@
/*
* Lowlevel setup for EXYNOS5 based board
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dmc.h>
#include <asm/arch/power.h>
#include <asm/arch/tzpc.h>
#include <asm/arch/periph.h>
#include <asm/arch/pinmux.h>
#include "common_setup.h"
/* These are the things we can do during low-level init */
enum {
DO_WAKEUP = 1 << 0,
DO_CLOCKS = 1 << 1,
DO_MEM_RESET = 1 << 2,
DO_UART = 1 << 3,
};
int do_lowlevel_init(void)
{
uint32_t reset_status;
int actions = 0;
arch_cpu_init();
reset_status = get_reset_status();
switch (reset_status) {
case S5P_CHECK_SLEEP:
actions = DO_CLOCKS | DO_WAKEUP;
break;
case S5P_CHECK_DIDLE:
case S5P_CHECK_LPA:
actions = DO_WAKEUP;
break;
default:
/* This is a normal boot (not a wake from sleep) */
actions = DO_CLOCKS | DO_MEM_RESET;
}
if (actions & DO_CLOCKS) {
system_clock_init();
mem_ctrl_init(actions & DO_MEM_RESET);
tzpc_init();
}
return actions & DO_WAKEUP;
}

40
arch/arm/cpu/armv7/exynos/pinmux.c
View File

@ -408,9 +408,49 @@ static int exynos4_mmc_config(int peripheral, int flags)
return 0;
}
static void exynos4_uart_config(int peripheral)
{
struct exynos4_gpio_part1 *gpio1 =
(struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
struct s5p_gpio_bank *bank;
int i, start, count;
switch (peripheral) {
case PERIPH_ID_UART0:
bank = &gpio1->a0;
start = 0;
count = 4;
break;
case PERIPH_ID_UART1:
bank = &gpio1->a0;
start = 4;
count = 4;
break;
case PERIPH_ID_UART2:
bank = &gpio1->a1;
start = 0;
count = 4;
break;
case PERIPH_ID_UART3:
bank = &gpio1->a1;
start = 4;
count = 2;
break;
}
for (i = start; i < start + count; i++) {
s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
}
}
static int exynos4_pinmux_config(int peripheral, int flags)
{
switch (peripheral) {
case PERIPH_ID_UART0:
case PERIPH_ID_UART1:
case PERIPH_ID_UART2:
case PERIPH_ID_UART3:
exynos4_uart_config(peripheral);
break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
case PERIPH_ID_I2C2:

50
arch/arm/cpu/armv7/exynos/power.c
View File

@ -140,3 +140,53 @@ void set_hw_thermal_trip(void)
setbits_le32(&power->ps_hold_control, POWER_ENABLE_HW_TRIP);
}
}
static uint32_t exynos5_get_reset_status(void)
{
struct exynos5_power *power =
(struct exynos5_power *)samsung_get_base_power();
return power->inform1;
}
static uint32_t exynos4_get_reset_status(void)
{
struct exynos4_power *power =
(struct exynos4_power *)samsung_get_base_power();
return power->inform1;
}
uint32_t get_reset_status(void)
{
if (cpu_is_exynos5())
return exynos5_get_reset_status();
else
return exynos4_get_reset_status();
}
static void exynos5_power_exit_wakeup(void)
{
struct exynos5_power *power =
(struct exynos5_power *)samsung_get_base_power();
typedef void (*resume_func)(void);
((resume_func)power->inform0)();
}
static void exynos4_power_exit_wakeup(void)
{
struct exynos4_power *power =
(struct exynos4_power *)samsung_get_base_power();
typedef void (*resume_func)(void);
((resume_func)power->inform0)();
}
void power_exit_wakeup(void)
{
if (cpu_is_exynos5())
exynos5_power_exit_wakeup();
else
exynos4_power_exit_wakeup();
}

84
board/samsung/smdk5250/spl_boot.c → arch/arm/cpu/armv7/exynos/spl_boot.c
View File

@ -23,12 +23,18 @@
#include<common.h>
#include<config.h>
#include <asm/arch-exynos/dmc.h>
#include <asm/arch/clock.h>
#include <asm/arch/clk.h>
#include <asm/arch/dmc.h>
#include <asm/arch/power.h>
#include <asm/arch/spl.h>
#include "common_setup.h"
#include "clock_init.h"
DECLARE_GLOBAL_DATA_PTR;
#define OM_STAT (0x1f << 1)
/* Index into irom ptr table */
enum index {
MMC_INDEX,
@ -48,20 +54,12 @@ u32 irom_ptr_table[] = {
[USB_INDEX] = 0x02020070, /* iROM Function Pointer-USB boot*/
};
enum boot_mode {
BOOT_MODE_MMC = 4,
BOOT_MODE_SERIAL = 20,
BOOT_MODE_EMMC = 8, /* EMMC4.4 */
/* Boot based on Operating Mode pin settings */
BOOT_MODE_OM = 32,
BOOT_MODE_USB, /* Boot using USB download */
};
void *get_irom_func(int index)
{
return (void *)*(u32 *)irom_ptr_table[index];
}
#ifdef CONFIG_USB_BOOTING
/*
* Set/clear program flow prediction and return the previous state.
*/
@ -75,6 +73,7 @@ static int config_branch_prediction(int set_cr_z)
return cr & CR_Z;
}
#endif
/*
* Copy U-boot from mmc to RAM:
@ -83,35 +82,42 @@ static int config_branch_prediction(int set_cr_z)
*/
void copy_uboot_to_ram(void)
{
int is_cr_z_set;
unsigned int sec_boot_check;
enum boot_mode bootmode = BOOT_MODE_OM;
u32 (*spi_copy)(u32 offset, u32 nblock, u32 dst);
u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst);
u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL;
u32 offset = 0, size = 0;
#ifdef CONFIG_SUPPORT_EMMC_BOOT
u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
void (*end_bootop_from_emmc)(void);
#endif
#ifdef CONFIG_USB_BOOTING
u32 (*usb_copy)(void);
int is_cr_z_set;
unsigned int sec_boot_check;
/* Read iRAM location to check for secondary USB boot mode */
sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT)
bootmode = BOOT_MODE_USB;
#endif
if (bootmode == BOOT_MODE_OM)
bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT;
bootmode = readl(samsung_get_base_power()) & OM_STAT;
switch (bootmode) {
#ifdef CONFIG_SPI_BOOTING
case BOOT_MODE_SERIAL:
spi_copy = get_irom_func(SPI_INDEX);
spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
CONFIG_SYS_TEXT_BASE);
offset = SPI_FLASH_UBOOT_POS;
size = CONFIG_BL2_SIZE;
copy_bl2 = get_irom_func(SPI_INDEX);
break;
#endif
case BOOT_MODE_MMC:
offset = BL2_START_OFFSET;
size = BL2_SIZE_BLOC_COUNT;
copy_bl2 = get_irom_func(MMC_INDEX);
copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
CONFIG_SYS_TEXT_BASE);
break;
#ifdef CONFIG_SUPPORT_EMMC_BOOT
case BOOT_MODE_EMMC:
/* Set the FSYS1 clock divisor value for EMMC boot */
emmc_boot_clk_div_set();
@ -122,6 +128,8 @@ void copy_uboot_to_ram(void)
copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
end_bootop_from_emmc();
break;
#endif
#ifdef CONFIG_USB_BOOTING
case BOOT_MODE_USB:
/*
* iROM needs program flow prediction to be disabled
@ -132,14 +140,50 @@ void copy_uboot_to_ram(void)
usb_copy();
config_branch_prediction(is_cr_z_set);
break;
#endif
default:
break;
}
if (copy_bl2)
copy_bl2(offset, size, CONFIG_SYS_TEXT_BASE);
}
void memzero(void *s, size_t n)
{
char *ptr = s;
size_t i;
for (i = 0; i < n; i++)
*ptr++ = '\0';
}
/**
* Set up the U-Boot global_data pointer
*
* This sets the address of the global data, and sets up basic values.
*
* @param gdp Value to give to gd
*/
static void setup_global_data(gd_t *gdp)
{
gd = gdp;
memzero((void *)gd, sizeof(gd_t));
gd->flags |= GD_FLG_RELOC;
gd->baudrate = CONFIG_BAUDRATE;
gd->have_console = 1;
}
void board_init_f(unsigned long bootflag)
{
__aligned(8) gd_t local_gd;
__attribute__((noreturn)) void (*uboot)(void);
setup_global_data(&local_gd);
if (do_lowlevel_init())
power_exit_wakeup();
copy_uboot_to_ram();
/* Jump to U-Boot image */

3
arch/arm/cpu/armv7/omap-common/emif-common.c
View File

@ -1200,6 +1200,9 @@ void dmm_init(u32 base)
/* TRAP for invalid TILER mappings in section 0 */
lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP;
if (omap_revision() >= OMAP4460_ES1_0)
lis_map_regs_calculated.is_ma_present = 1;
lisa_map_regs = &lis_map_regs_calculated;
#endif
struct dmm_lisa_map_regs *hw_lisa_map_regs =

2
arch/arm/cpu/armv7/omap5/hw_data.c
View File

@ -412,6 +412,8 @@ void enable_basic_clocks(void)
(*prcm)->cm_l4per_gpio4_clkctrl,
(*prcm)->cm_l4per_gpio5_clkctrl,
(*prcm)->cm_l4per_gpio6_clkctrl,
(*prcm)->cm_l4per_gpio7_clkctrl,
(*prcm)->cm_l4per_gpio8_clkctrl,
0
};

4
arch/arm/cpu/armv7/omap5/hwinit.c
View File

@ -43,13 +43,15 @@ DECLARE_GLOBAL_DATA_PTR;
u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
static struct gpio_bank gpio_bank_54xx[6] = {
static struct gpio_bank gpio_bank_54xx[8] = {
{ (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO7_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO8_BASE, METHOD_GPIO_24XX },
};
const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;

2
arch/arm/cpu/pxa/config.mk
View File

@ -24,7 +24,7 @@
PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale
PLATFORM_CPPFLAGS += -mcpu=xscale
# =========================================================================
#
# Supply options according to compiler version

3
arch/arm/cpu/pxa/start.S
View File

@ -208,10 +208,9 @@ cpu_init_crit:
* disable MMU stuff and caches
*/
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
bic r0, r0, #0x00003300 @ clear bits 13:12, 9:8 (--VI --RS)
bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
mcr p15, 0, r0, c1, c0, 0
mov pc, lr /* back to my caller */

28
arch/arm/dts/exynos5250.dtsi
View File

@ -202,6 +202,34 @@
interrupts = <0 78 0>;
};
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 51 0>;
id = <0>;
};
serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
interrupts = <0 52 0>;
id = <1>;
};
serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
interrupts = <0 53 0>;
id = <2>;
};
serial@12C30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C30000 0x100>;
interrupts = <0 54 0>;
id = <3>;
};
gpio: gpio {
};
};

27
arch/arm/dts/tegra114.dtsi
View File

@ -216,4 +216,31 @@
clocks = <&tegra_car 15>;
status = "disable";
};
usb@7d000000 {
compatible = "nvidia,tegra114-ehci";
reg = <0x7d000000 0x4000>;
interrupts = <52>;
phy_type = "utmi";
clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */
status = "disabled";
};
usb@7d004000 {
compatible = "nvidia,tegra114-ehci";
reg = <0x7d004000 0x4000>;
interrupts = <53>;
phy_type = "hsic";
clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */
status = "disabled";
};
usb@7d008000 {
compatible = "nvidia,tegra114-ehci";
reg = <0x7d008000 0x4000>;
interrupts = <129>;
phy_type = "utmi";
clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */
status = "disabled";
};
};

27
arch/arm/dts/tegra30.dtsi
View File

@ -216,4 +216,31 @@
clocks = <&tegra_car 15>;
status = "disabled";
};
usb@7d000000 {
compatible = "nvidia,tegra30-ehci";
reg = <0x7d000000 0x4000>;
interrupts = <52>;
phy_type = "utmi";
clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */
status = "disabled";
};
usb@7d004000 {
compatible = "nvidia,tegra30-ehci";
reg = <0x7d004000 0x4000>;
interrupts = <53>;
phy_type = "hsic";
clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */
status = "disabled";
};
usb@7d008000 {
compatible = "nvidia,tegra30-ehci";
reg = <0x7d008000 0x4000>;
interrupts = <129>;
phy_type = "utmi";
clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */
status = "disabled";
};
};

1
arch/arm/include/asm/arch-am33xx/ddr_defs.h
View File

@ -284,7 +284,6 @@ void config_ddr_data(const struct ddr_data *data, int nr);
* This structure represents the DDR io control on AM33XX devices.
*/
struct ddr_cmdtctrl {
unsigned int resv1[1];
unsigned int cm0ioctl;
unsigned int cm1ioctl;
unsigned int cm2ioctl;

2
arch/arm/include/asm/arch-am33xx/gpio.h
View File

@ -21,6 +21,8 @@
#include <asm/omap_gpio.h>
#define OMAP_MAX_GPIO 128
#define AM33XX_GPIO0_BASE 0x44E07000
#define AM33XX_GPIO1_BASE 0x4804C000
#define AM33XX_GPIO2_BASE 0x481AC000

13
arch/arm/include/asm/arch-exynos/cpu.h
View File

@ -40,8 +40,7 @@
#define EXYNOS4_WATCHDOG_BASE 0x10060000
#define EXYNOS4_TZPC_BASE 0x10110000
#define EXYNOS4_MIU_BASE 0x10600000
#define EXYNOS4_DMC0_BASE 0x10400000
#define EXYNOS4_DMC1_BASE 0x10410000
#define EXYNOS4_DMC_CTRL_BASE 0x10400000
#define EXYNOS4_GPIO_PART2_BASE 0x11000000
#define EXYNOS4_GPIO_PART1_BASE 0x11400000
#define EXYNOS4_FIMD_BASE 0x11C00000
@ -64,6 +63,7 @@
#define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS4X12 */
#define EXYNOS4X12_GPIO_PART3_BASE 0x03860000
@ -76,8 +76,7 @@
#define EXYNOS4X12_SYSTIMER_BASE 0x10050000
#define EXYNOS4X12_WATCHDOG_BASE 0x10060000
#define EXYNOS4X12_TZPC_BASE 0x10110000
#define EXYNOS4X12_DMC0_BASE 0x10600000
#define EXYNOS4X12_DMC1_BASE 0x10610000
#define EXYNOS4X12_DMC_CTRL_BASE 0x10600000
#define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000
#define EXYNOS4X12_GPIO_PART2_BASE 0x11000000
#define EXYNOS4X12_GPIO_PART1_BASE 0x11400000
@ -99,6 +98,7 @@
#define EXYNOS4X12_SPI_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS5 Common*/
#define EXYNOS5_I2C_SPACING 0x10000
@ -112,8 +112,7 @@
#define EXYNOS5_TZPC_BASE 0x10100000
#define EXYNOS5_WATCHDOG_BASE 0x101D0000
#define EXYNOS5_ACE_SFR_BASE 0x10830000
#define EXYNOS5_DMC_PHY0_BASE 0x10C00000
#define EXYNOS5_DMC_PHY1_BASE 0x10C10000
#define EXYNOS5_DMC_PHY_BASE 0x10C00000
#define EXYNOS5_GPIO_PART3_BASE 0x10D10000
#define EXYNOS5_DMC_CTRL_BASE 0x10DD0000
#define EXYNOS5_GPIO_PART1_BASE 0x11400000
@ -239,6 +238,8 @@ SAMSUNG_BASE(power, POWER_BASE)
SAMSUNG_BASE(spi, SPI_BASE)
SAMSUNG_BASE(spi_isp, SPI_ISP_BASE)
SAMSUNG_BASE(tzpc, TZPC_BASE)
SAMSUNG_BASE(dmc_ctrl, DMC_CTRL_BASE)
SAMSUNG_BASE(dmc_phy, DMC_PHY_BASE)
#endif
#endif /* _EXYNOS4_CPU_H */

12
arch/arm/include/asm/arch-exynos/power.h
View File

@ -888,4 +888,16 @@ void set_ps_hold_ctrl(void);
* source as XXTI
*/
void set_xclkout(void);
/*
* Read inform1 to get the reset status.
* @return: the value can be either S5P_CHECK_SLEEP or
* S5P_CHECK_DIDLE or S5P_CHECK_LPA as stored in inform1
* if none of these then its normal booting.
*/
uint32_t get_reset_status(void);
/* Read the resume function and call it */
void power_exit_wakeup(void);
#endif

1
arch/arm/include/asm/arch-exynos/spl.h
View File

@ -32,6 +32,7 @@ enum boot_mode {
* pin values are the same across Exynos4 and Exynos5.
*/
BOOT_MODE_MMC = 4,
BOOT_MODE_EMMC = 8, /* EMMC4.4 */
BOOT_MODE_SERIAL = 20,
/* Boot based on Operating Mode pin settings */
BOOT_MODE_OM = 32,

1
arch/arm/include/asm/arch-mx27/clock.h
View File

@ -26,6 +26,7 @@
enum mxc_clock {
MXC_ARM_CLK,
MXC_I2C_CLK,
MXC_UART_CLK,
MXC_ESDHC_CLK,
MXC_FEC_CLK,

2
arch/arm/include/asm/arch-mx6/imx-regs.h
View File

@ -364,7 +364,7 @@ struct iomuxc {
#define IOMUXC_GPR2_MODE_DISABLED 0
#define IOMUXC_GPR2_MODE_ENABLED_DI0 1
#define IOMUXC_GPR2_MODE_ENABLED_DI1 2
#define IOMUXC_GPR2_MODE_ENABLED_DI1 3
#define IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET 2
#define IOMUXC_GPR2_LVDS_CH1_MODE_MASK (3<<IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET)

1591
arch/arm/include/asm/arch-mx6/mx6dl_pins.h
View File

File diff suppressed because it is too large Load Diff

2
arch/arm/include/asm/arch-omap3/gpio.h
View File

@ -40,6 +40,8 @@
#include <asm/omap_gpio.h>
#define OMAP_MAX_GPIO 192
#define OMAP34XX_GPIO1_BASE 0x48310000
#define OMAP34XX_GPIO2_BASE 0x49050000
#define OMAP34XX_GPIO3_BASE 0x49052000

2
arch/arm/include/asm/arch-omap4/gpio.h
View File

@ -40,6 +40,8 @@
#include <asm/omap_gpio.h>
#define OMAP_MAX_GPIO 192
#define OMAP44XX_GPIO1_BASE 0x4A310000
#define OMAP44XX_GPIO2_BASE 0x48055000
#define OMAP44XX_GPIO3_BASE 0x48057000

4
arch/arm/include/asm/arch-omap5/gpio.h
View File

@ -40,11 +40,15 @@
#include <asm/omap_gpio.h>
#define OMAP_MAX_GPIO 256
#define OMAP54XX_GPIO1_BASE 0x4Ae10000
#define OMAP54XX_GPIO2_BASE 0x48055000
#define OMAP54XX_GPIO3_BASE 0x48057000
#define OMAP54XX_GPIO4_BASE 0x48059000
#define OMAP54XX_GPIO5_BASE 0x4805B000
#define OMAP54XX_GPIO6_BASE 0x4805D000
#define OMAP54XX_GPIO7_BASE 0x48051000
#define OMAP54XX_GPIO8_BASE 0x48053000
#endif /* _GPIO_OMAP5_H */

10
arch/arm/include/asm/arch-tegra/clk_rst.h
View File

@ -225,6 +225,16 @@ enum {
IN_408_OUT_9_6_DIVISOR = 83,
};
/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG1_0 */
#define PLLU_POWERDOWN (1 << 16)
#define PLL_ENABLE_POWERDOWN (1 << 14)
#define PLL_ACTIVE_POWERDOWN (1 << 12)
/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0 */
#define UTMIP_FORCE_PD_SAMP_C_POWERDOWN (1 << 4)
#define UTMIP_FORCE_PD_SAMP_B_POWERDOWN (1 << 2)
#define UTMIP_FORCE_PD_SAMP_A_POWERDOWN (1 << 0)
/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
#define OSC_XOBP_SHIFT 1
#define OSC_XOBP_MASK (1U << OSC_XOBP_SHIFT)

186
arch/arm/include/asm/arch-tegra/usb.h
View File

@ -1,5 +1,6 @@
/*
* Copyright (c) 2011 The Chromium OS Authors.
* Copyright (c) 2013 NVIDIA Corporation
* See file CREDITS for list of people who contributed to this
* project.
*
@ -22,120 +23,6 @@
#ifndef _TEGRA_USB_H_
#define _TEGRA_USB_H_
/* USB Controller (USBx_CONTROLLER_) regs */
struct usb_ctlr {
/* 0x000 */
uint id;
uint reserved0;
uint host;
uint device;
/* 0x010 */
uint txbuf;
uint rxbuf;
uint reserved1[2];
/* 0x020 */
uint reserved2[56];
/* 0x100 */
u16 cap_length;
u16 hci_version;
uint hcs_params;
uint hcc_params;
uint reserved3[5];
/* 0x120 */
uint dci_version;
uint dcc_params;
uint reserved4[6];
/* 0x140 */
uint usb_cmd;
uint usb_sts;
uint usb_intr;
uint frindex;
/* 0x150 */
uint reserved5;
uint periodic_list_base;
uint async_list_addr;
uint async_tt_sts;
/* 0x160 */
uint burst_size;
uint tx_fill_tuning;
uint reserved6; /* is this port_sc1 on some controllers? */
uint icusb_ctrl;
/* 0x170 */
uint ulpi_viewport;
uint reserved7;
uint endpt_nak;
uint endpt_nak_enable;
/* 0x180 */
uint reserved;
uint port_sc1;
uint reserved8[6];
/* 0x1a0 */
uint reserved9;
uint otgsc;
uint usb_mode;
uint endpt_setup_stat;
/* 0x1b0 */
uint reserved10[20];
/* 0x200 */
uint reserved11[0x80];
/* 0x400 */
uint susp_ctrl;
uint phy_vbus_sensors;
uint phy_vbus_wakeup_id;
uint phy_alt_vbus_sys;
/* 0x410 */
uint usb1_legacy_ctrl;
uint reserved12[4];
/* 0x424 */
uint ulpi_timing_ctrl_0;
uint ulpi_timing_ctrl_1;
uint reserved13[53];
/* 0x500 */
uint reserved14[64 * 3];
/* 0x800 */
uint utmip_pll_cfg0;
uint utmip_pll_cfg1;
uint utmip_xcvr_cfg0;
uint utmip_bias_cfg0;
/* 0x810 */
uint utmip_hsrx_cfg0;
uint utmip_hsrx_cfg1;
uint utmip_fslsrx_cfg0;
uint utmip_fslsrx_cfg1;
/* 0x820 */
uint utmip_tx_cfg0;
uint utmip_misc_cfg0;
uint utmip_misc_cfg1;
uint utmip_debounce_cfg0;
/* 0x830 */
uint utmip_bat_chrg_cfg0;
uint utmip_spare_cfg0;
uint utmip_xcvr_cfg1;
uint utmip_bias_cfg1;
};
/* USB1_LEGACY_CTRL */
#define USB1_NO_LEGACY_MODE 1
@ -146,25 +33,18 @@ struct usb_ctlr {
#define VBUS_SENSE_CTL_AB_SESS_VLD 2
#define VBUS_SENSE_CTL_A_SESS_VLD 3
/* USB2_IF_ULPI_TIMING_CTRL_0 */
#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
/* USB2_IF_ULPI_TIMING_CTRL_1 */
#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
/* USBx_IF_USB_SUSP_CTRL_0 */
#define ULPI_PHY_ENB (1 << 13)
#define UTMIP_PHY_ENB (1 << 12)
#define UTMIP_RESET (1 << 11)
#define USB_PHY_CLK_VALID (1 << 7)
#define USB_SUSP_CLR (1 << 5)
/* USB2_IF_USB_SUSP_CTRL_0 */
#define ULPI_PHY_ENB (1 << 13)
/* USBx_UTMIP_MISC_CFG0 */
#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22)
/* USBx_UTMIP_MISC_CFG1 */
#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6
#define UTMIP_PLLU_STABLE_COUNT_MASK \
@ -177,15 +57,28 @@ struct usb_ctlr {
/* USBx_UTMIP_PLL_CFG1_0 */
#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27
#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \
(0xf << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
(0x1f << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0
#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff
/* USBx_UTMIP_BIAS_CFG0_0 */
#define UTMIP_HSDISCON_LEVEL_MSB (1 << 24)
#define UTMIP_OTGPD (1 << 11)
#define UTMIP_BIASPD (1 << 10)
#define UTMIP_HSDISCON_LEVEL_SHIFT 2
#define UTMIP_HSDISCON_LEVEL_MASK \
(0x3 << UTMIP_HSDISCON_LEVEL_SHIFT)
#define UTMIP_HSSQUELCH_LEVEL_SHIFT 0
#define UTMIP_HSSQUELCH_LEVEL_MASK \
(0x3 << UTMIP_HSSQUELCH_LEVEL_SHIFT)
/* USBx_UTMIP_BIAS_CFG1_0 */
#define UTMIP_FORCE_PDTRK_POWERDOWN 1
#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3
#define UTMIP_BIAS_PDTRK_COUNT_MASK \
(0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
/* USBx_UTMIP_DEBOUNCE_CFG0_0 */
#define UTMIP_DEBOUNCE_CFG0_SHIFT 0
#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff
@ -195,9 +88,6 @@ struct usb_ctlr {
/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
#define UTMIP_PD_CHRG 1
/* USBx_UTMIP_XCVR_CFG0_0 */
#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
/* USBx_UTMIP_SPARE_CFG0_0 */
#define FUSE_SETUP_SEL (1 << 3)
@ -208,23 +98,26 @@ struct usb_ctlr {
#define UTMIP_ELASTIC_LIMIT_MASK \
(0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
/* USBx_UTMIP_HSRX_CFG0_1 */
/* USBx_UTMIP_HSRX_CFG1_0 */
#define UTMIP_HS_SYNC_START_DLY_SHIFT 1
#define UTMIP_HS_SYNC_START_DLY_MASK \
(0xf << UTMIP_HS_SYNC_START_DLY_SHIFT)
(0x1f << UTMIP_HS_SYNC_START_DLY_SHIFT)
/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
#define IC_ENB1 (1 << 3)
/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
#define PTS_SHIFT 30
#define PTS_MASK (3U << PTS_SHIFT)
#define PTS_UTMI 0
#define PTS_RESERVED 1
#define PTS_ULPI 2
#define PTS_ICUSB_SER 3
/* PORTSC1, USB1, defined for Tegra20 */
#define PTS1_SHIFT 31
#define PTS1_MASK (1 << PTS1_SHIFT)
#define STS1 (1 << 30)
#define STS (1 << 29)
#define PTS_UTMI 0
#define PTS_RESERVED 1
#define PTS_ULPI 2
#define PTS_ICUSB_SER 3
#define PTS_HSIC 4
/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
#define WKOC (1 << 22)
#define WKDS (1 << 21)
#define WKCN (1 << 20)
@ -233,8 +126,19 @@ struct usb_ctlr {
#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
#define UTMIP_XCVR_HSSLEW_MSB_SHIFT 25
#define UTMIP_XCVR_HSSLEW_MSB_MASK \
(0x7f << UTMIP_XCVR_HSSLEW_MSB_SHIFT)
#define UTMIP_XCVR_SETUP_MSB_SHIFT 22
#define UTMIP_XCVR_SETUP_MSB_MASK (0x7 << UTMIP_XCVR_SETUP_MSB_SHIFT)
#define UTMIP_XCVR_SETUP_SHIFT 0
#define UTMIP_XCVR_SETUP_MASK (0xf << UTMIP_XCVR_SETUP_SHIFT)
/* USBx_UTMIP_XCVR_CFG1_0 */
#define UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT 18
#define UTMIP_XCVR_TERM_RANGE_ADJ_MASK \
(0xf << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT)
#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)

156
arch/arm/include/asm/arch-tegra114/usb.h Normal file
View File

@ -0,0 +1,156 @@
/*
* Copyright (c) 2011 The Chromium OS Authors.
* Copyright (c) 2013 NVIDIA Corporation
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _TEGRA114_USB_H_
#define _TEGRA114_USB_H_
/* USB Controller (USBx_CONTROLLER_) regs */
struct usb_ctlr {
/* 0x000 */
uint id;
uint reserved0;
uint host;
uint device;
/* 0x010 */
uint txbuf;
uint rxbuf;
uint reserved1[2];
/* 0x020 */
uint reserved2[56];
/* 0x100 */
u16 cap_length;
u16 hci_version;
uint hcs_params;
uint hcc_params;
uint reserved3[5];
/* 0x120 */
uint dci_version;
uint dcc_params;
uint reserved4[2];
/* 0x130 */
uint usb_cmd;
uint usb_sts;
uint usb_intr;
uint frindex;
/* 0x140 */
uint reserved5;
uint periodic_list_base;
uint async_list_addr;
uint reserved5_1;
/* 0x150 */
uint burst_size;
uint tx_fill_tuning;
uint reserved6;
uint icusb_ctrl;
/* 0x160 */
uint ulpi_viewport;
uint reserved7[3];
/* 0x170 */
uint reserved;
uint port_sc1;
uint reserved8[6];
/* 0x190 */
uint reserved9[8];
/* 0x1b0 */
uint reserved10;
uint hostpc1_devlc;
uint reserved10_1[2];
/* 0x1c0 */
uint reserved10_2[4];
/* 0x1d0 */
uint reserved10_3[4];
/* 0x1e0 */
uint reserved10_4[4];
/* 0x1f0 */
uint reserved10_5;
uint otgsc;
uint usb_mode;
uint reserved10_6;
/* 0x200 */
uint endpt_nak;
uint endpt_nak_enable;
uint endpt_setup_stat;
uint reserved11_1[0x7D];
/* 0x400 */
uint susp_ctrl;
uint phy_vbus_sensors;
uint phy_vbus_wakeup_id;
uint phy_alt_vbus_sys;
/* 0x410 */
uint usb1_legacy_ctrl;
uint reserved12[3];
/* 0x420 */
uint reserved13[56];
/* 0x500 */
uint reserved14[64 * 3];
/* 0x800 */
uint utmip_pll_cfg0;
uint utmip_pll_cfg1;
uint utmip_xcvr_cfg0;
uint utmip_bias_cfg0;
/* 0x810 */
uint utmip_hsrx_cfg0;
uint utmip_hsrx_cfg1;
uint utmip_fslsrx_cfg0;
uint utmip_fslsrx_cfg1;
/* 0x820 */
uint utmip_tx_cfg0;
uint utmip_misc_cfg0;
uint utmip_misc_cfg1;
uint utmip_debounce_cfg0;
/* 0x830 */
uint utmip_bat_chrg_cfg0;
uint utmip_spare_cfg0;
uint utmip_xcvr_cfg1;
uint utmip_bias_cfg1;
};
/* USB2D_HOSTPC1_DEVLC_0 */
#define PTS_SHIFT 29
#define PTS_MASK (0x7U << PTS_SHIFT)
#define STS (1 << 28)
#endif /* _TEGRA114_USB_H_ */

155
arch/arm/include/asm/arch-tegra20/usb.h Normal file
View File

@ -0,0 +1,155 @@
/*
* Copyright (c) 2011 The Chromium OS Authors.
* Copyright (c) 2013 NVIDIA Corporation
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _TEGRA20_USB_H_
#define _TEGRA20_USB_H_
/* USB Controller (USBx_CONTROLLER_) regs */
struct usb_ctlr {
/* 0x000 */
uint id;
uint reserved0;
uint host;
uint device;
/* 0x010 */
uint txbuf;
uint rxbuf;
uint reserved1[2];
/* 0x020 */
uint reserved2[56];
/* 0x100 */
u16 cap_length;
u16 hci_version;
uint hcs_params;
uint hcc_params;
uint reserved3[5];
/* 0x120 */
uint dci_version;
uint dcc_params;
uint reserved4[6];
/* 0x140 */
uint usb_cmd;
uint usb_sts;
uint usb_intr;
uint frindex;
/* 0x150 */
uint reserved5;
uint periodic_list_base;
uint async_list_addr;
uint async_tt_sts;
/* 0x160 */
uint burst_size;
uint tx_fill_tuning;
uint reserved6; /* is this port_sc1 on some controllers? */
uint icusb_ctrl;
/* 0x170 */
uint ulpi_viewport;
uint reserved7;
uint endpt_nak;
uint endpt_nak_enable;
/* 0x180 */
uint reserved;
uint port_sc1;
uint reserved8[6];
/* 0x1a0 */
uint reserved9;
uint otgsc;
uint usb_mode;
uint endpt_setup_stat;
/* 0x1b0 */
uint reserved10[20];
/* 0x200 */
uint reserved11[0x80];
/* 0x400 */
uint susp_ctrl;
uint phy_vbus_sensors;
uint phy_vbus_wakeup_id;
uint phy_alt_vbus_sys;
/* 0x410 */
uint usb1_legacy_ctrl;
uint reserved12[4];
/* 0x424 */
uint ulpi_timing_ctrl_0;
uint ulpi_timing_ctrl_1;
uint reserved13[53];
/* 0x500 */
uint reserved14[64 * 3];
/* 0x800 */
uint utmip_pll_cfg0;
uint utmip_pll_cfg1;
uint utmip_xcvr_cfg0;
uint utmip_bias_cfg0;
/* 0x810 */
uint utmip_hsrx_cfg0;
uint utmip_hsrx_cfg1;
uint utmip_fslsrx_cfg0;
uint utmip_fslsrx_cfg1;
/* 0x820 */
uint utmip_tx_cfg0;
uint utmip_misc_cfg0;
uint utmip_misc_cfg1;
uint utmip_debounce_cfg0;
/* 0x830 */
uint utmip_bat_chrg_cfg0;
uint utmip_spare_cfg0;
uint utmip_xcvr_cfg1;
uint utmip_bias_cfg1;
};
/* USB2_IF_ULPI_TIMING_CTRL_0 */
#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
/* USB2_IF_ULPI_TIMING_CTRL_1 */
#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
/* PORTSC, USB2, USB3 */
#define PTS_SHIFT 30
#define PTS_MASK (3U << PTS_SHIFT)
#define STS (1 << 29)
#endif /* _TEGRA20_USB_H_ */

168
arch/arm/include/asm/arch-tegra30/usb.h Normal file
View File

@ -0,0 +1,168 @@
/*
* Copyright (c) 2011 The Chromium OS Authors.
* Copyright (c) 2013 NVIDIA Corporation
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _TEGRA30_USB_H_
#define _TEGRA30_USB_H_
/* USB Controller (USBx_CONTROLLER_) regs */
struct usb_ctlr {
/* 0x000 */
uint id;
uint reserved0;
uint host;
uint device;
/* 0x010 */
uint txbuf;
uint rxbuf;
uint reserved1[2];
/* 0x020 */
uint reserved2[56];
/* 0x100 */
u16 cap_length;
u16 hci_version;
uint hcs_params;
uint hcc_params;
uint reserved3[5];
/* 0x120 */
uint dci_version;
uint dcc_params;
uint reserved4[2];
/* 0x130 */
uint usb_cmd;
uint usb_sts;
uint usb_intr;
uint frindex;
/* 0x140 */
uint reserved5;
uint periodic_list_base;
uint async_list_addr;
uint reserved5_1;
/* 0x150 */
uint burst_size;
uint tx_fill_tuning;
uint reserved6;
uint icusb_ctrl;
/* 0x160 */
uint ulpi_viewport;
uint reserved7[3];
/* 0x170 */
uint reserved;
uint port_sc1;
uint reserved8[6];
/* 0x190 */
uint reserved9[8];
/* 0x1b0 */
uint reserved10;
uint hostpc1_devlc;
uint reserved10_1[2];
/* 0x1c0 */
uint reserved10_2[4];
/* 0x1d0 */
uint reserved10_3[4];
/* 0x1e0 */
uint reserved10_4[4];
/* 0x1f0 */
uint reserved10_5;
uint otgsc;
uint usb_mode;
uint reserved10_6;
/* 0x200 */
uint endpt_nak;
uint endpt_nak_enable;
uint endpt_setup_stat;
uint reserved11_1[0x7D];
/* 0x400 */
uint susp_ctrl;
uint phy_vbus_sensors;
uint phy_vbus_wakeup_id;
uint phy_alt_vbus_sys;
/* 0x410 */
uint usb1_legacy_ctrl;
uint reserved12[3];
/* 0x420 */
uint reserved13[56];
/* 0x500 */
uint reserved14[64 * 3];
/* 0x800 */
uint utmip_pll_cfg0;
uint utmip_pll_cfg1;
uint utmip_xcvr_cfg0;
uint utmip_bias_cfg0;
/* 0x810 */
uint utmip_hsrx_cfg0;
uint utmip_hsrx_cfg1;
uint utmip_fslsrx_cfg0;
uint utmip_fslsrx_cfg1;
/* 0x820 */
uint utmip_tx_cfg0;
uint utmip_misc_cfg0;
uint utmip_misc_cfg1;
uint utmip_debounce_cfg0;
/* 0x830 */
uint utmip_bat_chrg_cfg0;
uint utmip_spare_cfg0;
uint utmip_xcvr_cfg1;
uint utmip_bias_cfg1;
};
/* USB2_IF_ULPI_TIMING_CTRL_0 */
#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
/* USB2_IF_ULPI_TIMING_CTRL_1 */
#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
/* USB2D_HOSTPC1_DEVLC_0 */
#define PTS_SHIFT 29
#define PTS_MASK (0x7U << PTS_SHIFT)
#define STS (1 << 28)
#endif /* _TEGRA30_USB_H_ */

9
arch/arm/lib/relocate.S
View File

@ -70,6 +70,15 @@ fixnext:
relocate_done:
#ifdef __XSCALE__
/*
* On xscale, icache must be invalidated and write buffers drained,
* even with cache disabled - 4.2.7 of xscale core developer's manual
*/
mcr p15, 0, r0, c7, c7, 0 /* invalidate icache */
mcr p15, 0, r0, c7, c10, 4 /* drain write buffer */
#endif
/* ARMv4- don't know bx lr but the assembler fails to see that */
#ifdef __ARM_ARCH_4__

4
doc/README.m28 → board/denx/m28evk/README
View File

@ -9,5 +9,5 @@ arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28
board/denx/m28evk/ - M28EVK board specific files
include/configs/m28evk.h - M28EVK configuration file
Follow the instructions from doc/README.mx28_common to generate a bootable SD
card or to boot from NAND flash.
Follow the instructions from doc/README.mxs to generate a bootable SD card or to
boot from NAND flash.

3
doc/README.mx28evk → board/freescale/mx28evk/README
View File

@ -41,7 +41,6 @@ Note: The mx28evk board does not come with a NAND flash populated from the
factory. It comes with an empty slot (U23), which allows the insertion of a
48-pin TSOP flash device.
Follow the instructions from doc/README.mx28_common to generate a bootable SD
card.
Follow the instructions from doc/README.mxs to generate a bootable SD card.
Insert the SD card in slot 0, power up the board and U-boot will boot.

2
board/freescale/mx6qsabresd/Makefile → board/freescale/mx6sabresd/Makefile
View File

@ -23,7 +23,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
COBJS := mx6qsabresd.o
COBJS := mx6sabresd.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))

7
board/freescale/mx6qsabresd/mx6qsabresd.c → board/freescale/mx6sabresd/mx6sabresd.c
View File

@ -17,12 +17,10 @@
* GNU General Public License for more details.
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6q_pins.h>
#include <asm/arch/mx6-pins.h>
#include <asm/errno.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
@ -291,7 +289,6 @@ int board_late_init(void)
int checkboard(void)
{
puts("Board: MX6Q-SabreSD\n");
puts("Board: MX6-SabreSD\n");
return 0;
}

1
board/nvidia/common/board.c
View File

@ -47,6 +47,7 @@
#endif
#ifdef CONFIG_USB_EHCI_TEGRA
#include <asm/arch-tegra/usb.h>
#include <asm/arch/usb.h>
#endif
#ifdef CONFIG_TEGRA_MMC
#include <asm/arch-tegra/tegra_mmc.h>

7
board/nvidia/dts/tegra114-dalmore.dts
View File

@ -14,6 +14,7 @@
i2c4 = "/i2c@7000c700";
sdhci0 = "/sdhci@78000600";
sdhci1 = "/sdhci@78000400";
usb0 = "/usb@7d008000";
};
memory {
@ -61,4 +62,10 @@
bus-width = <8>;
status = "okay";
};
usb@7d008000 {
/* SPDIF_IN: USB_VBUS_EN1 */
nvidia,vbus-gpio = <&gpio 86 0>;
status = "okay";
};
};

32
board/nvidia/dts/tegra20-harmony.dts
View File

@ -17,6 +17,17 @@
reg = <0x00000000 0x40000000>;
};
host1x {
status = "okay";
dc@54200000 {
status = "okay";
rgb {
status = "okay";
nvidia,panel = <&lcd_panel>;
};
};
};
serial@70006300 {
clock-frequency = < 216000000 >;
};
@ -70,4 +81,25 @@
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <8>;
};
lcd_panel: panel {
clock = <42430000>;
xres = <1024>;
yres = <600>;
left-margin = <138>;
right-margin = <34>;
hsync-len = <136>;
lower-margin = <4>;
upper-margin = <21>;
vsync-len = <4>;
hsync-active-high;
vsyncx-active-high;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 0 0>;
nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
nvidia,panel-timings = <0 0 200 0 0>;
};
};

32
board/nvidia/dts/tegra20-ventana.dts
View File

@ -16,6 +16,17 @@
reg = <0x00000000 0x40000000>;
};
host1x {
status = "okay";
dc@54200000 {
status = "okay";
rgb {
status = "okay";
nvidia,panel = <&lcd_panel>;
};
};
};
serial@70006300 {
clock-frequency = < 216000000 >;
};
@ -56,4 +67,25 @@
status = "okay";
bus-width = <8>;
};
lcd_panel: panel {
clock = <72072000>;
xres = <1366>;
yres = <768>;
left-margin = <58>;
right-margin = <58>;
hsync-len = <58>;
lower-margin = <4>;
upper-margin = <4>;
vsync-len = <4>;
hsync-active-high;
vsync-active-high;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 2 0>;
nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */
nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
nvidia,panel-timings = <0 0 200 0 0>;
};
};

6
board/nvidia/dts/tegra30-beaver.dts
View File

@ -14,6 +14,7 @@
i2c4 = "/i2c@7000c700";
sdhci0 = "/sdhci@78000600";
sdhci1 = "/sdhci@78000000";
usb0 = "/usb@7d008000";
};
memory {
@ -68,4 +69,9 @@
status = "okay";
bus-width = <8>;
};
usb@7d008000 {
nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
status = "okay";
};
};

6
board/nvidia/dts/tegra30-cardhu.dts
View File

@ -14,6 +14,7 @@
i2c4 = "/i2c@7000c700";
sdhci0 = "/sdhci@78000600";
sdhci1 = "/sdhci@78000000";
usb0 = "/usb@7d008000";
};
memory {
@ -63,4 +64,9 @@
status = "okay";
bus-width = <8>;
};
usb@7d008000 {
nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
status = "okay";
};
};

7
board/nvidia/harmony/harmony.c
View File

@ -22,6 +22,7 @@
*/
#include <common.h>
#include <lcd.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
@ -59,3 +60,9 @@ void pin_mux_usb(void)
/* USB2 PHY reset GPIO */
pinmux_tristate_disable(PINGRP_UAC);
}
void pin_mux_display(void)
{
pinmux_set_func(PINGRP_SDC, PMUX_FUNC_PWM);
pinmux_tristate_disable(PINGRP_SDC);
}

34
board/palmtreo680/Makefile Normal file
View File

@ -0,0 +1,34 @@
#
# Palm Treo680 Support
#
# Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
#
# This file is released under the terms of GPL v2 and any later version.
# See the file COPYING in the root directory of the source tree for details.
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
COBJS := palmtreo680.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

581
board/palmtreo680/README Normal file
View File

@ -0,0 +1,581 @@
README for the Palm Treo 680.
Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
You may reproduce the contents of this file entirely or in part, but please
credit me by name if you do. Thanks.
Intro
=====
Yes, you can program u-boot onto the flash of your Palm Treo 680 so that u-boot
(then Linux, Android, ...) runs at power-up. This document describes how, and
gives some implementation details on this port of u-boot and describes how the
Treo 680 boots from reset.
But first, I probably don't need to tell you that after doing this, your phone
will no longer run PalmOS. You *may* be able to later restore your phone to its
original state by creating a backup image of the flash before writing u-boot
(details below), but this is not heavily tested and should not be relied upon.
There is also the possibility that something may go wrong during the process of
programming u-boot, leaving you with a bricked phone. If you follow these
instructions carefully this chance will be minimized, but I do not recommend
that you program u-boot onto a phone that you can not afford to lose, and
certainly not one that contains important data that is not backed up elsewhere.
I AM NOT RESPONSIBLE FOR THE LOSS OF YOUR PHONE. DO THIS AT YOUR OWN RISK.
Having said that, feel free to send me a note cursing me out if something does
go wrong, but please tell me what happened exactly. For that matter, I'd love
to hear from you if you succeed.
Details on the SPL
==================
The docg4 features a 2k region at the start of its address space that interfaces
to the system bus like a NOR flash. This allows the docg4 to function as a boot
ROM. The Treo 680 uses this feature. The contents of this 2k region are
write-protected and can not be reprogrammed. Fortunately, the code it contains
does what we need to do, at least partially. After some essential hardware
initialization (like the SDRAM controller), it runs an IPL (initial program
loader) that copies 128K (no more, no less) from flash to a fixed address in
SDRAM (0xa1700000) and jumps to it. 128K is too small for u-boot, so we use it
to load a u-boot secondary program loader (SPL). But since our SPL only
occupies a little over 1k, we can economize on flash usage by having the IPL
load a portion of u-boot proper as well. We let the IPL load the first 128k of
a concatenated spl + u-boot image, and because the SPL is placed before u-boot
proper, the IPL jumps to the SPL, which copies the portion of u-boot that the
IPL has already loaded to its correct SDRAM address, and then loads the
remainder of u-boot and jumps to it.
The docg4's "reliable mode"
===========================
This is a special mode of operation of the docg4's integrated controller whereby
consecutive pairs of 2k regions are used in parallel (in some fashion) to store
2k of data. In other words, the normal capacity is halved, but the data
integrity is improved. In this mode, the data is read or written from pages in
even-numbered 2k regions (regions starting at 0x000, 0x1000, 0x2000, ...). The
odd-numbered 2k regions (regions starting at 0x800, 0x1800, 0x2800, ...) are
transparently used in parallel. In reliable mode, the odd-numbered 2k regions
are not meant to be read or written directly.
Reliable mode is used by the IPL because there is not enough space in its 2k
footprint to implement the BCH ecc algorithm. Data that is read while reliable
mode is enabled must have been written in reliable mode, or the read fails.
However, data written in reliable mode can also be read in normal mode (just not
as reliably), but only from the even-numbered 2k regions; the odd-numbered 2k
regions appear to contain junk, and will generate ecc errors. When the IPL and
SPL read from flash, the odd-numbered 2k regions are explicitly skipped. The
same is true for the flash_u-boot utility when it writes the u-boot image in
reliable mode.
The docg4 Linux driver supports writing in reliable mode (it is enabled by the
module parameter), but not reading. However, the u-boot docg4_spl driver does
read in reliable mode, in the same fashion as the IPL.
Details on the IPL and its data format
======================================
Starting from block 5 and counting upward, the IPL will search for and load the
first two blocks it finds that contain a magic number in the oob of the first
page of the block. The contents are loaded to SDRAM starting at address
0xa1700000. After two blocks have been loaded, it jumps to 0xa1700000. The
number of blocks loaded and the load address in SDRAM are hard-coded; only the
flash offset of the blocks can vary at run-time (based on the presence of the
magic number).
In addition to using the docg4's reliable mode, the IPL expects each 512 byte
page to be written redundantly in the subsequent page. The hardware is capable
of detecting bit errors (but not correcting them), and if a bit error is
detected when a page is read, the page contents are discarded and the subsequent
page is read.
Reliable mode reduces the capacity of a block by half, and the redundant pages
reduce it by half again. As a result, the normal 256k capacity of a block is
reduced to 64k for the purposes of the IPL/SPL.
For the sake of simplicity and uniformity, the u-boot SPL mimics the operation
of the IPL, and expects the image to be stored in the same format.
Instructions on Programming u-boot to flash
===========================================
To program u-boot to your flash, you will need to boot the Linux kernel on your
phone using a PalmOS bootloader such as cocoboot. The details of building and
running Linux on your Treo (cross-compiling, creating a root filesystem,
configuring the kernel, etc) are beyond the scope of this document. The
remainder of this document describes in detail how to program u-boot to the
flash using Linux running on the Treo.
Hardware Prerequisites
======================
A Palm Treo 680:
(dugh)
A Palm usb cable:
You'll need this to establish a usbtty console connection to u-boot from a
desktop PC. Currently there is no support in u-boot for the pxa27x keypad
(coming soon), so a serial link must be used for the console.
These cables are still widely available if you don't already have one.
A Linux desktop PC.
You may be able to use Windows for the u-boot console if you have a usb driver
that is compatible with the Linux usbserial driver, but for programming u-boot
to flash, you'll really want to use a Linux PC.
Treo-side Software Prerequisites
================================
Linux bootloader for PalmOS:
Cocoboot is the only one I'm aware of. If you don't already have this, you
can download it from
https://download.enlightenment.org/misc/Illume/Treo-650/2008-11-13/sdcard-base.tar.gz
which is a compressed tar archive of the contents of an sd card containing
cocoboot. Use mkdosfs to create a fat16 filesystem on the first primary
partition of the card, mount the partition, and extract the tar file to it.
You will probably need to edit the cocoboot.conf file to customize the
parameters passed to the kernel.
Linux kernel:
The kernel on the Treo 680 is still a little rough around the edges, and the
official kernel frequently breaks on the Treo :( A development kernel
specifically for the Treo 680 can be found on github:
http://github.com/mike-dunn/linux-treo680
The master branch of this tree has been tested on the Treo, and I recommend
using this kernel for programming u-boot. As of this writing, there may be a
bug in the docg4 nand flash driver that sometimes causes block erasures to
fail. This has been fixed in the above tree.
If you choose to use the official kernel, it must contain the docg4 driver that
includes the reliable_mode module parameter. This was a later enhancement to
the driver, and was merged to the kernel as of v3.8. Do not try to use an
earlier kernel that contains the docg4 driver without support for writing in
reliable mode. If you try to program u-boot to flash with the docg4 driver
loaded without the reliable_mode parameter enabled, you *will* brick your
phone!
For the purpose of programming u-boot to flash, the following options must be
enabled in the Treo kernel's .config:
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_NAND_DOCG4=m
Note that the docg4 nand driver is configured as a module, because we will
want to load and unload it with reliable_mode enabled or disabled as needed.
You will also need to specify mtd partitions on the kernel command line. In
the instructions that follow, we will assume that the flash blocks to which
u-boot will be programmed are defined by the second partition on the device.
The u-boot config file (include/configs/palmtreo680.h) places the u-boot image
at the start of block 6 (offset 0x180000), which is the first writable
(non-protected) block on the flash (this is also where the PalmOS SPL starts).
The u-boot image occupies four blocks, so to create the u-boot partition, pass
this command line to the kernel:
mtdparts=Msys_Diskonchip_G4:1536k(protected_part)ro,1024k(bootloader_part),-(filesys_part)
This will create three partitions:
protected_part: the first six blocks, which are read-only
bootloader_part: the next four blocks, for the u-boot image
filesys_part: the remainder of the device
The mtdchar kernel device driver will use device nodes /dev/mtd0, /dev/mtd1,
and /dev/mtd2 for these partitions, respectively. Ensure that your root file
system at least has /dev/mtd1 if you are not running udev or mdev.
Userspace Utilities:
In addition to everything necessary to provide a useful userspace environment
(busybox is indispensable, of course), you will need the mtd-utils package on
your root filesystem. I use version 1.5.0 of mtd-utils, and I suggest you use
this version as well, or at leat a version very close to this one, as
mtd-utils has tended to be fluid.
Note that busybox includes a version of mtd-utils. These are deficient and
should not be used. When you run one of these utilities (nanddump, etc),
ensure you are invoking the separate executable from mtd-utils, and not the
one built into busybox. I recommend that you configure busybox with its
mtd-utils disabled to avoid any possibility of confusion.
You will also need to cross-compile the userspace Linux utility in
tools/palmtreo680/flash_u-boot.c, which we will run on the Treo to perform the
actual write of the u-boot image to flash. This utility links against libmtd
from the mtd-utils package.
Desktop PC-side Software Prerequisites
======================================
Terminal emulator application:
minicom, kermit, etc.
Linux kernel:
Compiled with CONFIG_USB_SERIAL enabled. Build this as a module.
Recommended (Not directly related to u-boot)
============================================
Working directly on the Treo's tiny screen and keypad is difficult and
error-prone. I recommend that you log into the Linux kernel running on your
Treo from your desktop PC using ethernet over usb. The desktop's kernel must be
configured with CONFIG_USB_USBNET, CONFIG_USB_NET_CDCETHER, and
CONFIG_USB_NET_CDC_SUBSET. The Treo's kernel will need CONFIG_USB_ETH, and its
init script will need to start an ssh daemon like dropbear. Note that the usb0
network interface will not appear on the desktop PC until the Treo kernel's usb
ethernet gadget driver has initialized. You must wait for this to occur (watch
the PC's kernel log) before you can assign usb0 an ip address and log in to the
Treo. If you also build the Treo's kernel with CONFIG_IP_PNP enabled, you can
pass its ip address on the kernel command line, and obviate the need to
initialize the network interface in your init script.
Having the Palm usb cable connected to the host has the added benefit of keeping
power supplied to your Treo, reducing the drain on the battery. If something
goes wrong while you're programming u-boot to the flash, you will have lots of
time to correct it before the battery dies.
I have encountered a situation where the kernel is sometimes unable to mount a
root filesystem on the mmc card due to the mmc controller not initializing in
time, (and CONFIG_MMC_UNSAFE_RESUME doesn't seem to help) so I recommend that
you build a minimal root filesystem into the kernel using the kernel's initramfs
feature (CONFIG_BLK_DEV_INITRD). If you want your root filesystem on the mmc
card, your init script can mount and switch_root to the mmc card after a short
sleep. But keep in mind that in this case you won't be able to use an mmc card
to transfer files between your desktop and the Treo once Linux is running.
Another option for transfering files is to mount an nfs filesystem exported by
the desktop PC. For greatest convenience, you can export the root filesystem
itself from your desktop PC and switch_root to it in your init script. This
will work if your initramfs init script contains a loop that waits for you to
initialize the usb0 network interface on the desktop PC; e.g., loop while a ping
to the desktop PC returns an error. After the loop exits, do the nfs mount and
call switch_root. (You can not use the kernel nfsroot feature because the
network will not be up when the kernel expects it to be; i.e., not until you
configure the usb0 interface on the desktop.) Use the nfs 'nolock' option when
mounting to avoid the need to run a portmapper like rpcbind.
Preliminaries
=============
Once Linux is running on your Treo, you may want to perform a few sanity checks
before programming u-boot. These checks will verify my assumptions regarding
all the Treo 680s out there, and also ensure that the flash and mtd-utils are
working correctly. If you are impatient and reckless, you may skip this
section, but see disclaimer at the top of this file!
Load the docg4 driver:
$ modprobe docg4 ignore_badblocks=1 reliable_mode=1
We tell the driver to use the docg4's "reliable mode" when writing because this
is the format required by the IPL, which runs from power-up and loads the first
portion of u-boot. We must ignore bad blocks because linux mtd uses out-of-band
(oob) bytes to mark bad blocks, which will cause the blocks written by PalmOS to
be misidentified as "bad" by libmtd.
Check the kernel log to ensure that all's well:
$ dmesg | tail
<... snip ...>
docg4 docg4: NAND device: 128MiB Diskonchip G4 detected
3 cmdlinepart partitions found on MTD device Msys_Diskonchip_G4
Creating 3 MTD partitions on "Msys_Diskonchip_G4":
0x000000000000-0x000000180000 : "protected_part"
0x000000180000-0x000000280000 : "bootloader_part"
0x000000280000-0x000008000000 : "filesys_part"
Ensure that the partition boundaries are as shown. (If no partitions are shown,
did you remember to pass them to the kernel on the command line?) We will write
u-boot to bootloader_part, which starts at offset 0x180000 (block 6) and spans 4
256k blocks. This partition is accessed through the device node /dev/mtd1.
The docg4 contains a read-only table that identifies blocks that were marked as
bad at the factory. This table is in the page at offset 0x2000, which is within
the partition protected_part (/dev/mtd0). There is a slight chance that one or
more of the four blocks that we will use for u-boot is listed in the table, so
use nanddump to inspect the table to see if this is the case:
$ nanddump -p -l 512 -s 0x2000 -o /dev/mtd0
ECC failed: 0
ECC corrected: 0
Number of bad blocks: 0
Number of bbt blocks: 0
Block size 262144, page size 512, OOB size 16
Dumping data starting at 0x00002000 and ending at 0x00002200...
0x00002000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<... snip ...>
The format of the table is simple: one bit per block, with block numbers
increasing from left to right, starting with block 0 as the most significant bit
of the first byte. A bit will be clear if the corresponding block is bad. We
want to use blocks 6 throgh 9, so both of the two least significant bits of the
first byte must be set, as must the two most significant bits of the second
byte. If this is not true in your case (you are very unlucky), you should use
the first contiguous set of four good blocks after block 6, and adjust the
partition boundaries accordingly. You will also have to change the value of
CONFIG_SYS_NAND_U_BOOT_OFFS in include/configs/palmtreo680.h and recompile
u-boot. Because the two blocks loaded by the IPL do not have to be contiguous,
but our SPL expects them to be, you will need to erase any good blocks that are
at an offset prior to CONFIG_SYS_NAND_U_BOOT_OFFS, so that the IPL does not find
the magic number in oob and load it. Once you have done all this, the
instructions in this file still apply, except that the instructions below for
restoring the original PalmOS block contents may need to be modified.
Next, use nanddump to verify that the PalmOS SPL is where we expect it to be.
The SPL can be identified by a magic number in the oob bytes of the first page
of each of the two blocks containing the SPL image. Pages are 512 bytes in
size, so to dump the first page, plus the oob:
$ nanddump -p -l 512 -s 0 -o /dev/mtd1
ECC failed: 0
ECC corrected: 0
Number of bad blocks: 0
Number of bbt blocks: 0
Block size 262144, page size 512, OOB size 16
Dumping data starting at 0x00000000 and ending at 0x00000200...
0x00000000: 0a 00 00 ea 00 00 00 00 00 00 00 00 00 00 00 00
<... snip ...>
0x000001f0: 13 4c 21 60 13 4d 2a 69 13 4b 29 69 89 1a 99 42
OOB Data: 42 49 50 4f 30 30 30 10 3a e2 00 92 be a0 11 ff
Verify that the first seven bytes of oob data match those in the above line.
(This is ASCII "BIPO000".)
Do the same for the next block:
$ nanddump -p -l 512 -s 0x40000 -o /dev/mtd1
The first seven oob bytes in last line should read:
OOB Data: 42 49 50 4f 30 30 31 81 db 8e 8f 46 07 9b 59 ff
(This is ASCII "BIPO001".)
For additional assurance, verify that the next block does *not* contain SPL
data.
$ nanddump -p -l 512 -s 0x80000 -o /dev/mtd1
It doesn't matter what the oob contains, as long as the first four bytes are
*not* ASCII "BIPO". PalmOS should only be using two blocks for the SPL
(although we will need four for u-boot).
If you want, you can back up the contents of bootloader_part to a file. You may
be able to restore it later, if desired (see "Restoring PalmOS" below).
$ nanddump -l 0x100000 -s 0 -o -f bootloader_part.orig /dev/mtd1
nanddump will spew voluminous warnings about uncorrectable ecc errors. This is
a consequence of reading pages that were written in reliable mode, and is
expected (these should all occur on pages in odd-numbered 2k regions; i.e.,
0x800, 0xa00, 0xc00, 0xe00, 0x1800, 0x1a00, ...). The size of the file
bootloader_part.orig should be 1081344, which is 2048 pages, each of size 512
plus 16 oob bytes. If you are using initramfs for the root filesystem, don't
forget to copy the file to permanent storage, such as an mmc card.
If all of the above went well, you can now program u-boot.
Programming u-boot
==================
Our u-boot includes a small SPL that must be prepended to u-boot proper. From
the base u-boot source directory on your desktop PC:
$ cat spl/u-boot-spl.bin u-boot.bin > u-boot-concat.bin
cd to the tools/palmtreo680/ directory, and cross-compile flash_u-boot.c for the
Treo:
$(CC) -o flash_u-boot $(CFLAGS) $(INCLUDEPATH) $(LIBPATH) flash_u-boot.c -lmtd
Substitute variable values from your cross-compilation environment as
appropriate. Note that it links to libmtd from mtd-utils, and this must be
included in $(LIBPATH) and $(INCLUDEPATH).
Transfer u-boot-concat.bin and the compiled flash_u-boot utility to the Treo's
root filesystem. On the Treo, cd to the directory where these files were
placed.
Load the docg4 driver if you have not already done so.
$ modprobe docg4 ignore_badblocks=1 reliable_mode=1
Erase the blocks to which we will write u-boot:
$ flash_erase /dev/mtd1 0x00 4
If no errors are reported, write u-boot to the flash:
$ ./flash_u-boot u-boot-concat.bin /dev/mtd1
You can use nanddump (see above) to verify that the data was written. This
time, "BIPO" should be seen in the first four oob bytes of the first page of all
four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000.
Shutdown linux, remove and re-insert the battery, hold your breath...
Enjoying u-boot
===============
After you insert the battery, the u-boot splash screen should appear on the lcd
after a few seconds. With the usb cable connecting the Treo to your PC, in the
kernel log of your PC you should see
<6>usb 3-1: New USB device found, idVendor=0525, idProduct=a4a6
<6>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 3-1: Product: U-Boot 2013.01-00167-gd62ef56-dirty
<6>usb 3-1: Manufacturer: Das U-Boot
Load the usbserial module on your desktop PC:
$ modprobe usbserial vendor=0x0525 product=0xa4a6
and run your favorite terminal emulation utility (minicom, kermit, etc) with the
serial device set to /dev/ttyUSB0 (assuming this is your only usb serial
device). You should be at the u-boot console (type 'help').
There is not much that is unique about using u-boot on the palm treo 680.
Kernels can be loaded from mmc, flash, and from the desktop PC via kermit. You
can expand the size of the second partition on the flash to contain a kernel, or
else put the kernel(s) in their own partition.
Nand commands work as expected, with the excepton that blocks not written by the
linux mtd subsystem may be misidentified by the u-boot docg4 driver as "bad" if
they contain data in the oob bytes. This will be the case for the blocks
containing the u-boot image, for example. To work around this, use 'nand scrub'
instead of 'nand erase' to erase these blocks, and 'nand read.raw' to read them
to memory. (It would be useful if u-boot's nand commands provided a way to
explicitly ignore "bad" blocks, because read.raw does not perform ecc.) The
'nand dump' command will read these "bad" blocks, however.
Currently u-boot itself can only be programmed to flash from Linux; there is no
support for reliable mode in u-boot's docg4 flash driver. This should be
corrected soon.
Customizing
===========
If you change u-boot's configuration significantly (adding or removing
features), you may have to adjust the value of CONFIG_SYS_NAND_U_BOOT_SIZE.
This is the size of the concatenated spl + u-boot image, and tells the SPL how
many flash blocks it needs to load. It will be rounded up to the next 64k
boundary (the spl flash block capacity), so it does not have to be exact, but
you must ensure that it is not less than the actual image size. If it is larger
than the image, blocks may be needlessly loaded, but if too small, u-boot may
only be partially loaded, resulting in a boot failure (bricked phone), so better
to be too large. The flash_u-boot utility will work with any size image and
write the required number of blocks, provided that the partition is large
enough.
As the first writable block on the device, block 6 seems to make the most sense
as the flash offset for writing u-boot (and this is where PalmOS places its
SPL). But you can place it elsewhere if you like. If you do, you need to
adjust CONFIG_SYS_NAND_U_BOOT_OFFS accordingly, and you must ensure that blocks
preceeding the ones containing u-boot do *not* have the magic number in oob (the
IPL looks for this). In other words, make sure that any blocks that previously
contained the u-boot image or PalmOS SPL are erased (and optionally written with
something else) so that the IPL does not load it. Also make sure that the new
u-boot starting offset is at the start of a flash partition (check the kernel
log after loading the docg4 driver), and pass the corresponding mtd device file
to the flash_u-boot utility.
The u-boot built-in default environment is used because a writable environment
in flash did not seem worth the cost of a 256k flash block. But adding this
should be straightforward.
Restoring PalmOS
================
If you backed up the contents of bootloader_part flash partition earlier, you
should be able to restore it with the shell script shown below. The first two
blocks of data contain the PalmOS SPL and were written in reliable mode, whereas
the next two blocks were written in normal mode, so the script has to load and
unload the docg4 driver. Make sure that the mtd-utils nandwrite and flash_erase
are in your path (and are not those from busybox). Also double-check that the
backup image file bootloader_part.orig is exactly 1081344 bytes in length. If
not, it was not backed up correctly. Run the script as:
./restore_bootpart bootloader_part.orig /dev/mtd1
The script will take a minute or so to run. When it finishes, you may want to
verify with nanddump that the data looks correct before you cycle power, because
if the backup or restore failed, your phone will be bricked. Note that as a
consequence of reliable mode, the odd-numbered 2k regions in the first two
blocks will not exactly match the contents of the backup file, (so unfortunately
we can't simply dump the flash contents to a file and do a binary diff with the
original back-up image to verify that it was restored correctly). Also,
nanddump will report uncorrectable ecc errors when it reads those regions.
#!/bin/sh
if [ $# -ne 2 ]; then
echo "usage: $0: <image file> <mtd device node>"
exit 1
fi
# reliable mode used for the first two blocks
modprobe -r docg4
modprobe docg4 ignore_badblocks=1 reliable_mode=1 || exit 1
# erase all four blocks
flash_erase $2 0 4
# Program the first two blocks in reliable mode.
# 2k (4 pages) is written at a time, skipping alternate 2k regions
# Note that "2k" is 2112 bytes, including 64 oob bytes
file_ofs=0
flash_ofs=0
page=0
while [ $page -ne 1024 ]; do
dd if=$1 bs=2112 skip=$file_ofs count=1 | nandwrite -o -n -s $flash_ofs $2 - || exit 1
file_ofs=$((file_ofs+2))
flash_ofs=$((flash_ofs+0x1000))
page=$((page+8))
done;
# normal mode used for the next two blocks
modprobe -r docg4
modprobe docg4 ignore_badblocks=1 || exit 1
dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1
modprobe -r docg4
TODO
====
- Keypad support.
- Interactive boot menu using keypad and lcd.
- Add reliable mode support to the u-boot docg4 driver.
- U-boot command that will write a new image to the bootloader partition in
flash.
- Linux FTD support.

148
board/palmtreo680/palmtreo680.c Normal file
View File

@ -0,0 +1,148 @@
/*
* Palm Treo 680 Support
*
* Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
*
* This file is released under the terms of GPL v2 and any later version.
* See the file COPYING in the root directory of the source tree for details.
*
*/
#include <common.h>
#include <command.h>
#include <serial.h>
#include <nand.h>
#include <malloc.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch-pxa/pxa.h>
#include <asm/arch-pxa/regs-mmc.h>
#include <asm/io.h>
#include <asm/global_data.h>
#include <u-boot/crc.h>
#include <linux/mtd/docg4.h>
DECLARE_GLOBAL_DATA_PTR;
static struct nand_chip docg4_nand_chip;
int board_init(void)
{
/* We have RAM, disable cache */
dcache_disable();
icache_disable();
gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
gd->bd->bi_boot_params = CONFIG_SYS_DRAM_BASE + 0x100;
return 0;
}
int dram_init(void)
{
/* IPL initializes SDRAM (we're already running from it) */
gd->ram_size = PHYS_SDRAM_1_SIZE;
return 0;
}
#ifdef CONFIG_LCD
void lcd_enable(void)
{
/*
* Undo the L_BIAS / gpio77 pin configuration performed by the pxa lcd
* driver code. We need it as an output gpio.
*/
writel((readl(GAFR2_L) & ~(0xc << 24)), GAFR2_L);
/* power-up and enable the lcd */
writel(0x00400000, GPSR(86)); /* enable; drive high */
writel(0x00002000, GPSR(77)); /* power; drive high */
writel(0x02000000, GPCR(25)); /* enable_n; drive low */
/* turn on LCD backlight and configure PWM for reasonable brightness */
writel(0x00, PWM_CTRL0);
writel(0x1b1, PWM_PERVAL0);
writel(0xfd, PWM_PWDUTY0);
writel(0x00000040, GPSR(38)); /* backlight power on */
}
#endif
#ifdef CONFIG_MMC
int board_mmc_init(bd_t *bis)
{
writel(1 << 10, GPSR(42)); /* power on */
return pxa_mmc_register(0);
}
#endif
void board_nand_init(void)
{
/* we have one 128M diskonchip G4 */
struct mtd_info *mtd = &nand_info[0];
struct nand_chip *nand = &docg4_nand_chip;
if (docg4_nand_init(mtd, nand, 0))
hang();
}
#ifdef CONFIG_SPL_BUILD
void nand_boot(void)
{
__attribute__((noreturn)) void (*uboot)(void);
extern const void *_start, *_end; /* boundaries of spl in memory */
/* size of spl; ipl loads this, and then a portion of u-boot */
const size_t spl_image_size = ((size_t)&_end - (size_t)&_start);
/* the flash offset of the blocks that are loaded by the spl */
const uint32_t spl_load_offset = CONFIG_SYS_NAND_U_BOOT_OFFS +
DOCG4_IPL_LOAD_BLOCK_COUNT * DOCG4_BLOCK_SIZE;
/* total number of bytes loaded by IPL */
const size_t ipl_load_size =
DOCG4_IPL_LOAD_BLOCK_COUNT * DOCG4_BLOCK_CAPACITY_SPL;
/* number of bytes of u-boot proper that was loaded by the IPL */
const size_t ipl_uboot_load_size = ipl_load_size - spl_image_size;
/* number of remaining bytes of u-boot that the SPL must load */
const size_t spl_load_size =
CONFIG_SYS_NAND_U_BOOT_SIZE - ipl_load_size;
/* memory address where we resume loading u-boot */
void *const load_addr =
(void *)(CONFIG_SYS_NAND_U_BOOT_DST + ipl_uboot_load_size);
/*
* Copy the portion of u-boot already read from flash by the IPL to its
* correct load address.
*/
memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST, &_end, ipl_uboot_load_size);
/*
* Resume loading u-boot where the IPL left off.
*/
nand_spl_load_image(spl_load_offset, spl_load_size, load_addr);
#ifdef CONFIG_NAND_ENV_DST
nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(void *)CONFIG_NAND_ENV_DST);
#ifdef CONFIG_ENV_OFFSET_REDUND
nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
(void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
#endif
#endif
/*
* Jump to U-Boot image
*/
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
(*uboot)();
}
void board_init_f(ulong bootflag)
{
nand_boot();
}
#endif /* CONFIG_SPL_BUILD */

0
board/samsung/smdk5250/smdk5250-uboot-spl.lds → board/samsung/common/exynos-uboot-spl.lds
View File

2
board/samsung/dts/exynos5250-smdk5250.dts
View File

@ -34,6 +34,8 @@
mmc1 = "/mmc@12210000";
mmc2 = "/mmc@12220000";
mmc3 = "/mmc@12230000";
serial0 = "/serial@12C30000";
console = "/serial@12C30000";
};
sromc@12250000 {

26
board/samsung/dts/exynos5250-snow.dts
View File

@ -30,6 +30,12 @@
spi2 = "/spi@12d40000";
spi3 = "/spi@131a0000";
spi4 = "/spi@131b0000";
mmc0 = "/mmc@12200000";
mmc1 = "/mmc@12210000";
mmc2 = "/mmc@12220000";
mmc3 = "/mmc@12230000";
serial0 = "/serial@12C30000";
console = "/serial@12C30000";
};
i2c4: i2c@12ca0000 {
@ -83,6 +89,26 @@
};
};
mmc@12200000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
samsung,removable = <0>;
};
mmc@12210000 {
status = "disabled";
};
mmc@12220000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
samsung,removable = <1>;
};
mmc@12230000 {
status = "disabled";
};
tmu@10060000 {
samsung,min-temp = <25>;
samsung,max-temp = <125>;

11
board/samsung/origen/Makefile
View File

@ -24,19 +24,12 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
SOBJS := mem_setup.o
SOBJS += lowlevel_init.o
ifndef CONFIG_SPL_BUILD
COBJS += origen.o
endif
ifdef CONFIG_SPL_BUILD
COBJS += mmc_boot.o
endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
ALL +=$(obj).depend $(LIB)

357
board/samsung/origen/lowlevel_init.S
View File

@ -1,357 +0,0 @@
/*
* Lowlevel setup for ORIGEN board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/cpu.h>
#include "origen_setup.h"
/*
* Register usages:
*
* r5 has zero always
* r7 has GPIO part1 base 0x11400000
* r6 has GPIO part2 base 0x11000000
*/
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
push {lr}
/* r5 has always zero */
mov r5, #0
ldr r7, =EXYNOS4_GPIO_PART1_BASE
ldr r6, =EXYNOS4_GPIO_PART2_BASE
/* check reset status */
ldr r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET)
ldr r1, [r0]
/* AFTR wakeup reset */
ldr r2, =S5P_CHECK_DIDLE
cmp r1, r2
beq exit_wakeup
/* LPA wakeup reset */
ldr r2, =S5P_CHECK_LPA
cmp r1, r2
beq exit_wakeup
/* Sleep wakeup reset */
ldr r2, =S5P_CHECK_SLEEP
cmp r1, r2
beq wakeup_reset
/*
* If U-boot is already running in ram, no need to relocate U-Boot.
* Memory controller must be configured before relocating U-Boot
* in ram.
*/
ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
bic r1, pc, r0 /* pc <- current addr of code */
/* r1 <- unmasked bits of pc */
ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
cmp r1, r2 /* compare r1, r2 */
beq 1f /* r0 == r1 then skip sdram init */
/* init system clock */
bl system_clock_init
/* Memory initialize */
bl mem_ctrl_asm_init
1:
/* for UART */
bl uart_asm_init
bl arch_cpu_init
bl tzpc_init
pop {pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_asm_init
bl arch_cpu_init
bl tzpc_init
exit_wakeup:
/* Load return address and jump to kernel */
ldr r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET)
/* r1 = physical address of exynos4210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
mov pc, r1
nop
nop
/*
* system_clock_init: Initialize core clock and bus clock.
* void system_clock_init(void)
*/
system_clock_init:
push {lr}
ldr r0, =EXYNOS4_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =CLK_SRC_CPU_VAL
ldr r2, =CLK_SRC_CPU_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
2: subs r1, r1, #1
bne 2b
ldr r1, =CLK_SRC_TOP0_VAL
ldr r2, =CLK_SRC_TOP0_OFFSET
str r1, [r0, r2]
ldr r1, =CLK_SRC_TOP1_VAL
ldr r2, =CLK_SRC_TOP1_OFFSET
str r1, [r0, r2]
/* DMC */
ldr r1, =CLK_SRC_DMC_VAL
ldr r2, =CLK_SRC_DMC_OFFSET
str r1, [r0, r2]
/*CLK_SRC_LEFTBUS */
ldr r1, =CLK_SRC_LEFTBUS_VAL
ldr r2, =CLK_SRC_LEFTBUS_OFFSET
str r1, [r0, r2]
/*CLK_SRC_RIGHTBUS */
ldr r1, =CLK_SRC_RIGHTBUS_VAL
ldr r2, =CLK_SRC_RIGHTBUS_OFFSET
str r1, [r0, r2]
/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
ldr r1, =CLK_SRC_FSYS_VAL
ldr r2, =CLK_SRC_FSYS_OFFSET
str r1, [r0, r2]
/* UART[0:4] */
ldr r1, =CLK_SRC_PERIL0_VAL
ldr r2, =CLK_SRC_PERIL0_OFFSET
str r1, [r0, r2]
/* CAM , FIMC 0-3 */
ldr r1, =CLK_SRC_CAM_VAL
ldr r2, =CLK_SRC_CAM_OFFSET
str r1, [r0, r2]
/* MFC */
ldr r1, =CLK_SRC_MFC_VAL
ldr r2, =CLK_SRC_MFC_OFFSET
str r1, [r0, r2]
/* G3D */
ldr r1, =CLK_SRC_G3D_VAL
ldr r2, =CLK_SRC_G3D_OFFSET
str r1, [r0, r2]
/* LCD0 */
ldr r1, =CLK_SRC_LCD0_VAL
ldr r2, =CLK_SRC_LCD0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
3: subs r1, r1, #1
bne 3b
/* CLK_DIV_CPU0 */
ldr r1, =CLK_DIV_CPU0_VAL
ldr r2, =CLK_DIV_CPU0_OFFSET
str r1, [r0, r2]
/* CLK_DIV_CPU1 */
ldr r1, =CLK_DIV_CPU1_VAL
ldr r2, =CLK_DIV_CPU1_OFFSET
str r1, [r0, r2]
/* CLK_DIV_DMC0 */
ldr r1, =CLK_DIV_DMC0_VAL
ldr r2, =CLK_DIV_DMC0_OFFSET
str r1, [r0, r2]
/*CLK_DIV_DMC1 */
ldr r1, =CLK_DIV_DMC1_VAL
ldr r2, =CLK_DIV_DMC1_OFFSET
str r1, [r0, r2]
/* CLK_DIV_LEFTBUS */
ldr r1, =CLK_DIV_LEFTBUS_VAL
ldr r2, =CLK_DIV_LEFTBUS_OFFSET
str r1, [r0, r2]
/* CLK_DIV_RIGHTBUS */
ldr r1, =CLK_DIV_RIGHTBUS_VAL
ldr r2, =CLK_DIV_RIGHTBUS_OFFSET
str r1, [r0, r2]
/* CLK_DIV_TOP */
ldr r1, =CLK_DIV_TOP_VAL
ldr r2, =CLK_DIV_TOP_OFFSET
str r1, [r0, r2]
/* MMC[0:1] */
ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */
ldr r2, =CLK_DIV_FSYS1_OFFSET
str r1, [r0, r2]
/* MMC[2:3] */
ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */
ldr r2, =CLK_DIV_FSYS2_OFFSET
str r1, [r0, r2]
/* MMC4 */
ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */
ldr r2, =CLK_DIV_FSYS3_OFFSET
str r1, [r0, r2]
/* CLK_DIV_PERIL0: UART Clock Divisors */
ldr r1, =CLK_DIV_PERIL0_VAL
ldr r2, =CLK_DIV_PERIL0_OFFSET
str r1, [r0, r2]
/* CAM, FIMC 0-3: CAM Clock Divisors */
ldr r1, =CLK_DIV_CAM_VAL
ldr r2, =CLK_DIV_CAM_OFFSET
str r1, [r0, r2]
/* CLK_DIV_MFC: MFC Clock Divisors */
ldr r1, =CLK_DIV_MFC_VAL
ldr r2, =CLK_DIV_MFC_OFFSET
str r1, [r0, r2]
/* CLK_DIV_G3D: G3D Clock Divisors */
ldr r1, =CLK_DIV_G3D_VAL
ldr r2, =CLK_DIV_G3D_OFFSET
str r1, [r0, r2]
/* CLK_DIV_LCD0: LCD0 Clock Divisors */
ldr r1, =CLK_DIV_LCD0_VAL
ldr r2, =CLK_DIV_LCD0_OFFSET
str r1, [r0, r2]
/* Set PLL locktime */
ldr r1, =PLL_LOCKTIME
ldr r2, =APLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =PLL_LOCKTIME
ldr r2, =MPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =PLL_LOCKTIME
ldr r2, =EPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =PLL_LOCKTIME
ldr r2, =VPLL_LOCK_OFFSET
str r1, [r0, r2]
/* APLL_CON1 */
ldr r1, =APLL_CON1_VAL
ldr r2, =APLL_CON1_OFFSET
str r1, [r0, r2]
/* APLL_CON0 */
ldr r1, =APLL_CON0_VAL
ldr r2, =APLL_CON0_OFFSET
str r1, [r0, r2]
/* MPLL_CON1 */
ldr r1, =MPLL_CON1_VAL
ldr r2, =MPLL_CON1_OFFSET
str r1, [r0, r2]
/* MPLL_CON0 */
ldr r1, =MPLL_CON0_VAL
ldr r2, =MPLL_CON0_OFFSET
str r1, [r0, r2]
/* EPLL */
ldr r1, =EPLL_CON1_VAL
ldr r2, =EPLL_CON1_OFFSET
str r1, [r0, r2]
/* EPLL_CON0 */
ldr r1, =EPLL_CON0_VAL
ldr r2, =EPLL_CON0_OFFSET
str r1, [r0, r2]
/* VPLL_CON1 */
ldr r1, =VPLL_CON1_VAL
ldr r2, =VPLL_CON1_OFFSET
str r1, [r0, r2]
/* VPLL_CON0 */
ldr r1, =VPLL_CON0_VAL
ldr r2, =VPLL_CON0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x30000
4: subs r1, r1, #1
bne 4b
pop {pc}
/*
* uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
* void uart_asm_init(void)
*/
.globl uart_asm_init
uart_asm_init:
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
ldr r1, =EXYNOS4_GPIO_A0_CON_VAL
str r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET]
ldr r1, =EXYNOS4_GPIO_A1_CON_VAL
str r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET]
ldr r0, =EXYNOS4_UART_BASE
add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
ldr r1, =ULCON_VAL
str r1, [r0, #ULCON_OFFSET]
ldr r1, =UCON_VAL
str r1, [r0, #UCON_OFFSET]
ldr r1, =UFCON_VAL
str r1, [r0, #UFCON_OFFSET]
ldr r1, =UBRDIV_VAL
str r1, [r0, #UBRDIV_OFFSET]
ldr r1, =UFRACVAL_VAL
str r1, [r0, #UFRACVAL_OFFSET]
mov pc, lr
nop
nop
nop

421
board/samsung/origen/mem_setup.S
View File

@ -1,421 +0,0 @@
/*
* Memory setup for ORIGEN board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include "origen_setup.h"
#define SET_MIU
.globl mem_ctrl_asm_init
mem_ctrl_asm_init:
/*
* Async bridge configuration at CPU_core:
* 1: half_sync
* 0: full_sync
*/
ldr r0, =ASYNC_CONFIG
mov r1, #1
str r1, [r0]
#ifdef SET_MIU
ldr r0, =EXYNOS4_MIU_BASE
/* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
ldr r1, =0x20001507
str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
/* Update MIU Configuration */
ldr r1, =0x00000001
str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
#endif
/* DREX0 */
ldr r0, =EXYNOS4_DMC0_BASE
/*
* DLL Parameter Setting:
* Termination: Enable R/W
* Phase Delay for DQS Cleaning: 180' Shift
*/
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/*
* ZQ Calibration
* Termination: Disable
* Auto Calibration Start: Enable
*/
ldr r1, =0xE3855703
str r1, [r0, #DMC_PHYZQCONTROL]
/* Wait ?us*/
mov r2, #0x100000
1: subs r2, r2, #1
bne 1b
/*
* Update DLL Information:
* Force DLL Resyncronization
*/
ldr r1, =0xe000008e
str r1, [r0, #DMC_PHYCONTROL1]
/* Reset Force DLL Resyncronization */
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* Enable Differential DQS, DLL Off*/
ldr r1, =0x71101008
str r1, [r0, #DMC_PHYCONTROL0]
/* Activate PHY DLL: DLL On */
ldr r1, =0x7110100A
str r1, [r0, #DMC_PHYCONTROL0]
/* Set DLL Parameters */
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* DLL Start */
ldr r1, =0x7110100B
str r1, [r0, #DMC_PHYCONTROL0]
ldr r1, =0x00000000
str r1, [r0, #DMC_PHYCONTROL2]
/* Set Clock Ratio of Bus clock to Memory Clock */
ldr r1, =0x0FFF301a
str r1, [r0, #DMC_CONCONTROL]
/*
* Memor Burst length: 8
* Number of chips: 2
* Memory Bus width: 32 bit
* Memory Type: DDR3
* Additional Latancy for PLL: 1 Cycle
*/
ldr r1, =0x00312640
str r1, [r0, #DMC_MEMCONTROL]
/*
* Memory Configuration Chip 0
* Address Mapping: Interleaved
* Number of Column address Bits: 10 bits
* Number of Rows Address Bits: 14
* Number of Banks: 8
*/
ldr r1, =0x20e01323
str r1, [r0, #DMC_MEMCONFIG0]
/*
* Memory Configuration Chip 1
* Address Mapping: Interleaved
* Number of Column address Bits: 10 bits
* Number of Rows Address Bits: 14
* Number of Banks: 8
*/
ldr r1, =0x40e01323
str r1, [r0, #DMC_MEMCONFIG1]
/* Config Precharge Policy */
ldr r1, =0xff000000
str r1, [r0, #DMC_PRECHCONFIG]
/*
* TimingAref, TimingRow, TimingData, TimingPower Setting:
* Values as per Memory AC Parameters
*/
ldr r1, =0x000000BB
str r1, [r0, #DMC_TIMINGAREF]
ldr r1, =0x4046654f
str r1, [r0, #DMC_TIMINGROW]
ldr r1, =0x46400506
str r1, [r0, #DMC_TIMINGDATA]
ldr r1, =0x52000A3C
str r1, [r0, #DMC_TIMINGPOWER]
/* Chip0: NOP Command: Assert and Hold CKE to high level */
ldr r1, =0x07000000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
2: subs r2, r2, #1
bne 2b
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
ldr r1, =0x00020000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00030000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00010002
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00000328
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
3: subs r2, r2, #1
bne 3b
/* Chip0: ZQINIT */
ldr r1, =0x0a000000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
4: subs r2, r2, #1
bne 4b
/* Chip1: NOP Command: Assert and Hold CKE to high level */
ldr r1, =0x07100000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
5: subs r2, r2, #1
bne 5b
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
ldr r1, =0x00120000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00130000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00110002
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00100328
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
6: subs r2, r2, #1
bne 6b
/* Chip1: ZQINIT */
ldr r1, =0x0a100000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
7: subs r2, r2, #1
bne 7b
ldr r1, =0xe000008e
str r1, [r0, #DMC_PHYCONTROL1]
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* Wait ?us*/
mov r2, #0x100000
8: subs r2, r2, #1
bne 8b
/* DREX1 */
ldr r0, =EXYNOS4_DMC1_BASE @0x10410000
/*
* DLL Parameter Setting:
* Termination: Enable R/W
* Phase Delay for DQS Cleaning: 180' Shift
*/
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/*
* ZQ Calibration:
* Termination: Disable
* Auto Calibration Start: Enable
*/
ldr r1, =0xE3855703
str r1, [r0, #DMC_PHYZQCONTROL]
/* Wait ?us*/
mov r2, #0x100000
1: subs r2, r2, #1
bne 1b
/*
* Update DLL Information:
* Force DLL Resyncronization
*/
ldr r1, =0xe000008e
str r1, [r0, #DMC_PHYCONTROL1]
/* Reset Force DLL Resyncronization */
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* Enable Differential DQS, DLL Off*/
ldr r1, =0x71101008
str r1, [r0, #DMC_PHYCONTROL0]
/* Activate PHY DLL: DLL On */
ldr r1, =0x7110100A
str r1, [r0, #DMC_PHYCONTROL0]
/* Set DLL Parameters */
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* DLL Start */
ldr r1, =0x7110100B
str r1, [r0, #DMC_PHYCONTROL0]
ldr r1, =0x00000000
str r1, [r0, #DMC_PHYCONTROL2]
/* Set Clock Ratio of Bus clock to Memory Clock */
ldr r1, =0x0FFF301a
str r1, [r0, #DMC_CONCONTROL]
/*
* Memor Burst length: 8
* Number of chips: 2
* Memory Bus width: 32 bit
* Memory Type: DDR3
* Additional Latancy for PLL: 1 Cycle
*/
ldr r1, =0x00312640
str r1, [r0, #DMC_MEMCONTROL]
/*
* Memory Configuration Chip 0
* Address Mapping: Interleaved
* Number of Column address Bits: 10 bits
* Number of Rows Address Bits: 14
* Number of Banks: 8
*/
ldr r1, =0x20e01323
str r1, [r0, #DMC_MEMCONFIG0]
/*
* Memory Configuration Chip 1
* Address Mapping: Interleaved
* Number of Column address Bits: 10 bits
* Number of Rows Address Bits: 14
* Number of Banks: 8
*/
ldr r1, =0x40e01323
str r1, [r0, #DMC_MEMCONFIG1]
/* Config Precharge Policy */
ldr r1, =0xff000000
str r1, [r0, #DMC_PRECHCONFIG]
/*
* TimingAref, TimingRow, TimingData, TimingPower Setting:
* Values as per Memory AC Parameters
*/
ldr r1, =0x000000BB
str r1, [r0, #DMC_TIMINGAREF]
ldr r1, =0x4046654f
str r1, [r0, #DMC_TIMINGROW]
ldr r1, =0x46400506
str r1, [r0, #DMC_TIMINGDATA]
ldr r1, =0x52000A3C
str r1, [r0, #DMC_TIMINGPOWER]
/* Chip0: NOP Command: Assert and Hold CKE to high level */
ldr r1, =0x07000000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
2: subs r2, r2, #1
bne 2b
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
ldr r1, =0x00020000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00030000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00010002
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00000328
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
3: subs r2, r2, #1
bne 3b
/* Chip 0: ZQINIT */
ldr r1, =0x0a000000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
4: subs r2, r2, #1
bne 4b
/* Chip1: NOP Command: Assert and Hold CKE to high level */
ldr r1, =0x07100000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
5: subs r2, r2, #1
bne 5b
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
ldr r1, =0x00120000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00130000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00110002
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00100328
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
6: subs r2, r2, #1
bne 6b
/* Chip1: ZQINIT */
ldr r1, =0x0a100000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
7: subs r2, r2, #1
bne 7b
ldr r1, =0xe000008e
str r1, [r0, #DMC_PHYCONTROL1]
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* Wait ?us*/
mov r2, #0x100000
8: subs r2, r2, #1
bne 8b
/* turn on DREX0, DREX1 */
ldr r0, =EXYNOS4_DMC0_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #DMC_CONCONTROL]
ldr r0, =EXYNOS4_DMC1_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #DMC_CONCONTROL]
mov pc, lr

58
board/samsung/origen/mmc_boot.c
View File

@ -1,58 +0,0 @@
/*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include<common.h>
#include<config.h>
/*
* Copy U-boot from mmc to RAM:
* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
* Pointer to API (Data transfer from mmc to ram)
*/
void copy_uboot_to_ram(void)
{
u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
}
void board_init_f(unsigned long bootflag)
{
__attribute__((noreturn)) void (*uboot)(void);
copy_uboot_to_ram();
/* Jump to U-Boot image */
uboot = (void *)CONFIG_SYS_TEXT_BASE;
(*uboot)();
/* Never returns Here */
}
/* Place Holders */
void board_init_r(gd_t *id, ulong dest_addr)
{
/* Function attribute is no-return */
/* This Function never executes */
while (1)
;
}
void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}

46
board/samsung/origen/origen.c
View File

@ -25,6 +25,8 @@
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/periph.h>
#include <asm/arch/pinmux.h>
DECLARE_GLOBAL_DATA_PTR;
struct exynos4_gpio_part1 *gpio1;
@ -39,6 +41,50 @@ int board_init(void)
return 0;
}
static int board_uart_init(void)
{
int err;
err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
if (err) {
debug("UART0 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
if (err) {
debug("UART1 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
if (err) {
debug("UART2 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
if (err) {
debug("UART3 not configured\n");
return err;
}
return 0;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
int err;
err = board_uart_init();
if (err) {
debug("UART init failed\n");
return err;
}
return err;
}
#endif
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)

14
board/samsung/smdk5250/Makefile
View File

@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
SOBJS := lowlevel_init.o
COBJS := clock_init.o
COBJS += dmc_common.o dmc_init_ddr3.o
COBJS += smdk5250_spl.o
ifndef CONFIG_SPL_BUILD
@ -38,14 +34,10 @@ COBJS += smdk5250.o
endif
endif
ifdef CONFIG_SPL_BUILD
COBJS += spl_boot.o
endif
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
ALL := $(obj).depend $(LIB)
ALL := $(obj).depend $(LIB)
all: $(ALL)

12
board/samsung/smdk5250/smdk5250.c
View File

@ -144,7 +144,7 @@ int power_init_board(void)
/* VDD_MIF */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
MAX77686_BUCK1OUT_1V)) {
MAX77686_BUCK1OUT_1_05V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK1OUT);
return -1;
@ -332,6 +332,16 @@ static int board_uart_init(void)
return ret;
}
void board_i2c_init(const void *blob)
{
int i;
for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
exynos_pinmux_config((PERIPH_ID_I2C0 + i),
PINMUX_FLAG_NONE);
}
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{

10
board/samsung/smdkv310/Makefile
View File

@ -24,18 +24,12 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
SOBJS := mem_setup.o
SOBJS += lowlevel_init.o
ifndef CONFIG_SPL_BUILD
COBJS += smdkv310.o
endif
ifdef CONFIG_SPL_BUILD
COBJS += mmc_boot.o
endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
ALL := $(obj).depend $(LIB)

414
board/samsung/smdkv310/lowlevel_init.S
View File

@ -1,414 +0,0 @@
/*
* Lowlevel setup for SMDKV310 board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/cpu.h>
/*
* Register usages:
*
* r5 has zero always
* r7 has GPIO part1 base 0x11400000
* r6 has GPIO part2 base 0x11000000
*/
#define MEM_DLLl_ON
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
push {lr}
/* r5 has always zero */
mov r5, #0
ldr r7, =EXYNOS4_GPIO_PART1_BASE
ldr r6, =EXYNOS4_GPIO_PART2_BASE
/* check reset status */
ldr r0, =(EXYNOS4_POWER_BASE + 0x81C) @ INFORM7
ldr r1, [r0]
/* AFTR wakeup reset */
ldr r2, =S5P_CHECK_DIDLE
cmp r1, r2
beq exit_wakeup
/* Sleep wakeup reset */
ldr r2, =S5P_CHECK_SLEEP
cmp r1, r2
beq wakeup_reset
/*
* If U-boot is already running in ram, no need to relocate U-Boot.
* Memory controller must be configured before relocating U-Boot
* in ram.
*/
ldr r0, =0x00ffffff /* r0 <- Mask Bits*/
bic r1, pc, r0 /* pc <- current addr of code */
/* r1 <- unmasked bits of pc */
ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
cmp r1, r2 /* compare r1, r2 */
beq 1f /* r0 == r1 then skip sdram init */
/* init system clock */
bl system_clock_init
/* Memory initialize */
bl mem_ctrl_asm_init
1:
/* for UART */
bl uart_asm_init
bl arch_cpu_init
bl tzpc_init
pop {pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_asm_init
bl arch_cpu_init
bl tzpc_init
exit_wakeup:
/* Load return address and jump to kernel */
ldr r0, =(EXYNOS4_POWER_BASE + 0x800) @ INFORM0
/* r1 = physical address of exynos4210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
mov pc, r1
nop
nop
/*
* system_clock_init: Initialize core clock and bus clock.
* void system_clock_init(void)
*/
system_clock_init:
push {lr}
ldr r0, =EXYNOS4_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =0x0101
ldr r2, =0x14200 @CLK_SRC_CPU
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
2: subs r1, r1, #1
bne 2b
ldr r1, =0x00
ldr r2, =0x0C210 @CLK_SRC_TOP0
str r1, [r0, r2]
ldr r1, =0x00
ldr r2, =0x0C214 @CLK_SRC_TOP1_OFFSET
str r1, [r0, r2]
/* DMC */
ldr r1, =0x00
ldr r2, =0x10200 @CLK_SRC_DMC_OFFSET
str r1, [r0, r2]
/*CLK_SRC_LEFTBUS */
ldr r1, =0x00
ldr r2, =0x04200 @CLK_SRC_LEFTBUS_OFFSET
str r1, [r0, r2]
/*CLK_SRC_RIGHTBUS */
ldr r1, =0x00
ldr r2, =0x08200 @CLK_SRC_RIGHTBUS_OFFSET
str r1, [r0, r2]
/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
ldr r1, =0x066666
ldr r2, =0x0C240 @ CLK_SRC_FSYS
str r1, [r0, r2]
/* UART[0:4], PWM: SCLKMPLL(6) */
ldr r1, =0x06666666
ldr r2, =0x0C250 @CLK_SRC_PERIL0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
3: subs r1, r1, #1
bne 3b
/*
* CLK_DIV_CPU0:
*
* PCLK_DBG_RATIO[20] 0x1
* ATB_RATIO[16] 0x3
* PERIPH_RATIO[12] 0x3
* COREM1_RATIO[8] 0x7
* COREM0_RATIO[4] 0x3
*/
ldr r1, =0x0133730
ldr r2, =0x14500 @CLK_DIV_CPU0_OFFSET
str r1, [r0, r2]
/* CLK_DIV_CPU1: COPY_RATIO [0] 0x3 */
ldr r1, =0x03
ldr r2, =0x14504 @CLK_DIV_CPU1_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_DMC0:
*
* CORE_TIMERS_RATIO[28] 0x1
* COPY2_RATIO[24] 0x3
* DMCP_RATIO[20] 0x1
* DMCD_RATIO[16] 0x1
* DMC_RATIO[12] 0x1
* DPHY_RATIO[8] 0x1
* ACP_PCLK_RATIO[4] 0x1
* ACP_RATIO[0] 0x3
*/
ldr r1, =0x13111113
ldr r2, =0x010500 @CLK_DIV_DMC0_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_DMC1:
*
* DPM_RATIO[24] 0x1
* DVSEM_RATIO[16] 0x1
* PWI_RATIO[8] 0x1
*/
ldr r1, =0x01010100
ldr r2, =0x010504 @CLK_DIV_DMC1_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_LEFRBUS:
*
* GPL_RATIO[4] 0x1
* GDL_RATIO[0] 0x3
*/
ldr r1, =0x013
ldr r2, =0x04500 @CLK_DIV_LEFTBUS_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_RIGHTBUS:
*
* GPR_RATIO[4] 0x1
* GDR_RATIO[0] 0x3
*/
ldr r1, =0x013
ldr r2, =0x08500 @CLK_DIV_RIGHTBUS_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_TOP:
*
* ONENAND_RATIO[16] 0x0
* ACLK_133_RATIO[12] 0x5
* ACLK_160_RATIO[8] 0x4
* ACLK_100_RATIO[4] 0x7
* ACLK_200_RATIO[0] 0x3
*/
ldr r1, =0x05473
ldr r2, =0x0C510 @CLK_DIV_TOP_OFFSET
str r1, [r0, r2]
/* MMC[0:1] */
ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
ldr r2, =0x0C544 @ CLK_DIV_FSYS1
str r1, [r0, r2]
/* MMC[2:3] */
ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
ldr r2, =0x0C548 @ CLK_DIV_FSYS2
str r1, [r0, r2]
/* MMC4 */
ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */
ldr r2, =0x0C54C @ CLK_DIV_FSYS3
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
4: subs r1, r1, #1
bne 4b
/*
* CLK_DIV_PERIL0:
*
* UART5_RATIO[20] 8
* UART4_RATIO[16] 8
* UART3_RATIO[12] 8
* UART2_RATIO[8] 8
* UART1_RATIO[4] 8
* UART0_RATIO[0] 8
*/
ldr r1, =0x774777
ldr r2, =0x0C550 @CLK_DIV_PERIL0_OFFSET
str r1, [r0, r2]
/* SLIMBUS: ???, PWM */
ldr r1, =0x8
ldr r2, =0x0C55C @ CLK_DIV_PERIL3
str r1, [r0, r2]
/* Set PLL locktime */
ldr r1, =0x01C20
ldr r2, =0x014000 @APLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =0x01C20
ldr r2, =0x014008 @MPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =0x01C20
ldr r2, =0x0C010 @EPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =0x01C20
ldr r2, =0x0C020 @VPLL_LOCK_OFFSET
str r1, [r0, r2]
/*
* APLL_CON1:
*
* APLL_AFC_ENB[31] 0x1
* APLL_AFC[0] 0xC
*/
ldr r1, =0x8000000C
ldr r2, =0x014104 @APLL_CON1_OFFSET
str r1, [r0, r2]
/*
* APLL_CON0:
*
* APLL_MDIV[16] 0xFA
* APLL_PDIV[8] 0x6
* APLL_SDIV[0] 0x1
*/
ldr r1, =0x80FA0601
ldr r2, =0x014100 @APLL_CON0_OFFSET
str r1, [r0, r2]
/*
* MPLL_CON1:
*
* MPLL_AFC_ENB[31] 0x1
* MPLL_AFC[0] 0x1C
*/
ldr r1, =0x0000001C
ldr r2, =0x01410C @MPLL_CON1_OFFSET
str r1, [r0, r2]
/*
* MPLL_CON0:
*
* MPLL_MDIV[16] 0xC8
* MPLL_PDIV[8] 0x6
* MPLL_SDIV[0] 0x1
*/
ldr r1, =0x80C80601
ldr r2, =0x014108 @MPLL_CON0_OFFSET
str r1, [r0, r2]
/* EPLL */
ldr r1, =0x0
ldr r2, =0x0C114 @EPLL_CON1_OFFSET
str r1, [r0, r2]
/*
* EPLL_CON0:
*
* EPLL_MDIV[16] 0x30
* EPLL_PDIV[8] 0x3
* EPLL_SDIV[0] 0x2
*/
ldr r1, =0x80300302
ldr r2, =0x0C110 @EPLL_CON0_OFFSET
str r1, [r0, r2]
/*
* VPLL_CON1:
*
* VPLL_MRR[24] 0x11
* VPLL_MFR[16] 0x0
* VPLL_K[0] 0x400
*/
ldr r1, =0x11000400
ldr r2, =0x0C124 @VPLL_CON1_OFFSET
str r1, [r0, r2]
/*
* VPLL_CON0:
*
* VPLL_MDIV[16] 0x35
* VPLL_PDIV[8] 0x3
* VPLL_SDIV[0] 0x2
*/
ldr r1, =0x80350302
ldr r2, =0x0C120 @VPLL_CON0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x30000
3: subs r1, r1, #1
bne 3b
pop {pc}
/*
* uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
* void uart_asm_init(void)
*/
.globl uart_asm_init
uart_asm_init:
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
ldr r1, =0x22222222
str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET
ldr r1, =0x00222222
str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET
ldr r0, =EXYNOS4_UART_BASE
add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
ldr r1, =0x3C5
str r1, [r0, #0x4]
ldr r1, =0x111
str r1, [r0, #0x8]
ldr r1, =0x3
str r1, [r0, #0x0]
ldr r1, =0x35
str r1, [r0, #0x28]
ldr r1, =0x4
str r1, [r0, #0x2c]
mov pc, lr
nop
nop
nop

365
board/samsung/smdkv310/mem_setup.S
View File

@ -1,365 +0,0 @@
/*
* Memory setup for SMDKV310 board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#define SET_MIU
#define MEM_DLL
#ifdef CONFIG_CLK_800_330_165
#define DRAM_CLK_330
#endif
#ifdef CONFIG_CLK_1000_200_200
#define DRAM_CLK_200
#endif
#ifdef CONFIG_CLK_1000_330_165
#define DRAM_CLK_330
#endif
#ifdef CONFIG_CLK_1000_400_200
#define DRAM_CLK_400
#endif
.globl mem_ctrl_asm_init
mem_ctrl_asm_init:
/*
* Async bridge configuration at CPU_core:
* 1: half_sync
* 0: full_sync
*/
ldr r0, =0x10010350
mov r1, #1
str r1, [r0]
#ifdef SET_MIU
ldr r0, =EXYNOS4_MIU_BASE @0x10600000
#ifdef CONFIG_MIU_1BIT_INTERLEAVED
ldr r1, =0x0000000c
str r1, [r0, #0x400] @MIU_INTLV_CONFIG
ldr r1, =0x40000000
str r1, [r0, #0x808] @MIU_INTLV_START_ADDR
ldr r1, =0xbfffffff
str r1, [r0, #0x810] @MIU_INTLV_END_ADDR
ldr r1, =0x00000001
str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
#endif
#ifdef CONFIG_MIU_2BIT_INTERLEAVED
ldr r1, =0x2000150c
str r1, [r0, #0x400] @MIU_INTLV_CONFIG
ldr r1, =0x40000000
str r1, [r0, #0x808] @MIU_INTLV_START_ADDR
ldr r1, =0xbfffffff
str r1, [r0, #0x810] @MIU_INTLV_END_ADDR
ldr r1, =0x00000001
str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
#endif
#ifdef CONFIG_MIU_LINEAR
ldr r1, =0x40000000
str r1, [r0, #0x818] @MIU_SINGLE_MAPPING0_START_ADDR
ldr r1, =0x7fffffff
str r1, [r0, #0x820] @MIU_SINGLE_MAPPING0_END_ADDR
ldr r1, =0x80000000
str r1, [r0, #0x828] @MIU_SINGLE_MAPPING1_START_ADDR
ldr r1, =0xbfffffff
str r1, [r0, #0x830] @MIU_SINGLE_MAPPING1_END_ADDR]
ldr r1, =0x00000006
str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
#endif
#endif
/* DREX0 */
ldr r0, =EXYNOS4_DMC0_BASE @0x10400000
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xE3855703
str r1, [r0, #0x44] @DMC_PHYZQCONTROL
mov r2, #0x100000
1: subs r2, r2, #1
bne 1b
ldr r1, =0xe000008e
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0x71101008
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0x7110100A
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0x7110100B
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0x00000000
str r1, [r0, #0x20] @DMC_PHYCONTROL2
ldr r1, =0x0FFF301a
str r1, [r0, #0x00] @DMC_CONCONTROL
ldr r1, =0x00312640
str r1, [r0, #0x04] @DMC_MEMCONTROL]
#ifdef CONFIG_MIU_LINEAR
ldr r1, =0x40e01323
str r1, [r0, #0x08] @DMC_MEMCONFIG0
ldr r1, =0x60e01323
str r1, [r0, #0x0C] @DMC_MEMCONFIG1
#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */
ldr r1, =0x20e01323
str r1, [r0, #0x08] @DMC_MEMCONFIG0
ldr r1, =0x40e01323
str r1, [r0, #0x0C] @DMC_MEMCONFIG1
#endif
ldr r1, =0xff000000
str r1, [r0, #0x14] @DMC_PRECHCONFIG
ldr r1, =0x000000BC
str r1, [r0, #0x30] @DMC_TIMINGAREF
#ifdef DRAM_CLK_330
ldr r1, =0x3545548d
str r1, [r0, #0x34] @DMC_TIMINGROW
ldr r1, =0x45430506
str r1, [r0, #0x38] @DMC_TIMINGDATA
ldr r1, =0x4439033c
str r1, [r0, #0x3C] @DMC_TIMINGPOWER
#endif
#ifdef DRAM_CLK_400
ldr r1, =0x4046654f
str r1, [r0, #0x34] @DMC_TIMINGROW
ldr r1, =0x56500506
str r1, [r0, #0x38] @DMC_TIMINGDATA
ldr r1, =0x5444033d
str r1, [r0, #0x3C] @DMC_TIMINGPOWER
#endif
ldr r1, =0x07000000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
2: subs r2, r2, #1
bne 2b
ldr r1, =0x00020000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00030000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00010002
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00000328
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
3: subs r2, r2, #1
bne 3b
ldr r1, =0x0a000000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
4: subs r2, r2, #1
bne 4b
ldr r1, =0x07100000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
5: subs r2, r2, #1
bne 5b
ldr r1, =0x00120000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00130000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00110002
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00100328
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
6: subs r2, r2, #1
bne 6b
ldr r1, =0x0a100000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
7: subs r2, r2, #1
bne 7b
ldr r1, =0xe000008e
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
mov r2, #0x100000
8: subs r2, r2, #1
bne 8b
/* DREX1 */
ldr r0, =EXYNOS4_DMC1_BASE @0x10410000
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xE3855703
str r1, [r0, #0x44] @DMC_PHYZQCONTROL
mov r2, #0x100000
1: subs r2, r2, #1
bne 1b
ldr r1, =0xe000008e
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0x71101008
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0x7110100A
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0x7110100B
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0x00000000
str r1, [r0, #0x20] @DMC_PHYCONTROL2
ldr r1, =0x0FFF301a
str r1, [r0, #0x00] @DMC_CONCONTROL
ldr r1, =0x00312640
str r1, [r0, #0x04] @DMC_MEMCONTROL]
#ifdef CONFIG_MIU_LINEAR
ldr r1, =0x40e01323
str r1, [r0, #0x08] @DMC_MEMCONFIG0
ldr r1, =0x60e01323
str r1, [r0, #0x0C] @DMC_MEMCONFIG1
#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */
ldr r1, =0x20e01323
str r1, [r0, #0x08] @DMC_MEMCONFIG0
ldr r1, =0x40e01323
str r1, [r0, #0x0C] @DMC_MEMCONFIG1
#endif
ldr r1, =0xff000000
str r1, [r0, #0x14] @DMC_PRECHCONFIG
ldr r1, =0x000000BC
str r1, [r0, #0x30] @DMC_TIMINGAREF
#ifdef DRAM_CLK_330
ldr r1, =0x3545548d
str r1, [r0, #0x34] @DMC_TIMINGROW
ldr r1, =0x45430506
str r1, [r0, #0x38] @DMC_TIMINGDATA
ldr r1, =0x4439033c
str r1, [r0, #0x3C] @DMC_TIMINGPOWER
#endif
#ifdef DRAM_CLK_400
ldr r1, =0x4046654f
str r1, [r0, #0x34] @DMC_TIMINGROW
ldr r1, =0x56500506
str r1, [r0, #0x38] @DMC_TIMINGDATA
ldr r1, =0x5444033d
str r1, [r0, #0x3C] @DMC_TIMINGPOWER
#endif
ldr r1, =0x07000000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
2: subs r2, r2, #1
bne 2b
ldr r1, =0x00020000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00030000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00010002
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00000328
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
3: subs r2, r2, #1
bne 3b
ldr r1, =0x0a000000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
4: subs r2, r2, #1
bne 4b
ldr r1, =0x07100000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
5: subs r2, r2, #1
bne 5b
ldr r1, =0x00120000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00130000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00110002
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00100328
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
6: subs r2, r2, #1
bne 6b
ldr r1, =0x0a100000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
7: subs r2, r2, #1
bne 7b
ldr r1, =0xe000008e
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
mov r2, #0x100000
8: subs r2, r2, #1
bne 8b
/* turn on DREX0, DREX1 */
ldr r0, =0x10400000 @APB_DMC_0_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #0x00] @DMC_CONCONTROL
ldr r0, =0x10410000 @APB_DMC_1_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #0x00] @DMC_CONCONTROL
mov pc, lr

60
board/samsung/smdkv310/mmc_boot.c
View File

@ -1,60 +0,0 @@
/*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include<common.h>
#include<config.h>
/*
* Copy U-boot from mmc to RAM:
* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
* API (Data transfer from mmc to ram)
*/
void copy_uboot_to_ram(void)
{
u32 (*copy_bl2)(u32, u32, u32) = (void *)COPY_BL2_FNPTR_ADDR;
copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
}
void board_init_f(unsigned long bootflag)
{
__attribute__((noreturn)) void (*uboot)(void);
copy_uboot_to_ram();
/* Jump to U-Boot image */
uboot = (void *)CONFIG_SYS_TEXT_BASE;
(*uboot)();
/* Never returns Here */
}
/* Place Holders */
void board_init_r(gd_t *id, ulong dest_addr)
{
/*Function attribute is no-return*/
/*This Function never executes*/
while (1)
;
}
void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
{
}

46
board/samsung/smdkv310/smdkv310.c
View File

@ -26,6 +26,8 @@
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/periph.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR;
@ -137,3 +139,47 @@ int board_mmc_init(bd_t *bis)
return err;
}
#endif
static int board_uart_init(void)
{
int err;
err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
if (err) {
debug("UART0 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
if (err) {
debug("UART1 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
if (err) {
debug("UART2 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
if (err) {
debug("UART3 not configured\n");
return err;
}
return 0;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
int err;
err = board_uart_init();
if (err) {
debug("UART init failed\n");
return err;
}
return err;
}
#endif

5
board/wandboard/README
View File

@ -22,6 +22,11 @@ To build U-Boot for the Wandboard Solo version:
$ make wandboard_solo_config
$ make
To build U-Boot for the Wandboard Quad version:
$ make wandboard_quad_config
$ make
Flashing U-boot into the SD card
--------------------------------

2
board/wandboard/wandboard.c
View File

@ -48,7 +48,7 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
gd->ram_size = CONFIG_DDR_MB * SZ_1M;
gd->ram_size = (phys_size_t)CONFIG_DDR_MB * 1024 * 1024;
return 0;
}

7
boards.cfg
View File

@ -267,9 +267,10 @@ ima3-mx53 arm armv7 ima3-mx53 esg
vision2 arm armv7 vision2 ttcontrol mx5 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg
cgtqmx6qeval arm armv7 cgtqmx6eval congatec mx6 cgtqmx6eval:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
mx6qarm2 arm armv7 mx6qarm2 freescale mx6 mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg
mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg
mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q
mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
mx6dlsabresd arm armv7 mx6sabresd freescale mx6 mx6sabresd:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL
mx6qsabresd arm armv7 mx6sabresd freescale mx6 mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
mx6slevk arm armv7 mx6slevk freescale mx6 mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL
titanium arm armv7 titanium freescale mx6 titanium:IMX_CONFIG=board/freescale/titanium/imximage.cfg
vf610twr arm armv7 vf610twr freescale vf610 vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg
@ -281,6 +282,7 @@ nitrogen6q2g arm armv7 nitrogen6x boundar
nitrogen6s arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512
nitrogen6s1g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024
wandboard_dl arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024
wandboard_quad arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048
wandboard_solo arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512
omap3_overo arm armv7 overo - omap3
omap3_pandora arm armv7 pandora - omap3
@ -352,6 +354,7 @@ lp8x4x arm pxa lp8x4x icpdas
lubbock arm pxa
palmld arm pxa
palmtc arm pxa
palmtreo680 arm pxa
polaris arm pxa trizepsiv - - trizepsiv:POLARIS
pxa255_idp arm pxa
trizepsiv arm pxa

75
doc/README.mx28_common
View File

@ -1,12 +1,15 @@
Booting U-boot on a MX28 processor
==================================
Booting U-boot on a MXS processor
=================================
This document describes the MX28 U-Boot port. This document mostly
covers topics related to making the module/board bootable.
This document describes the MXS U-Boot port. This document mostly covers topics
related to making the module/board bootable.
Terminology
-----------
The term "MXS" refers to a family of Freescale SoCs that is composed by MX23
and MX28.
The dollar symbol ($) introduces a snipped of shell code. This shall be typed
into the unix command prompt in U-Boot source code root directory.
@ -17,16 +20,16 @@ Contents
--------
1) Prerequisites
2) Compiling U-Boot for a MX28 based board
3) Installation of U-Boot for a MX28 based board to SD card
4) Installation of U-Boot into NAND flash
2) Compiling U-Boot for a MXS based board
3) Installation of U-Boot for a MXS based board to SD card
4) Installation of U-Boot into NAND flash on a MX28 based board
1) Prerequisites
----------------
To make a MX28 based board bootable, some tools are necessary. The first one
is the "elftosb" tool distributed by Freescale Semiconductor. The other one
is the "mxsboot" tool found in U-Boot source tree.
To make a MXS based board bootable, some tools are necessary. The first one is
the "elftosb" tool distributed by Freescale Semiconductor. The other one is the
"mxsboot" tool found in U-Boot source tree.
Firstly, obtain the elftosb archive from the following location:
@ -60,18 +63,18 @@ copy the binary by hand:
Make sure the "elftosb" binary can be found in your $PATH, in this case this
means "/usr/local/bin/" has to be in your $PATH.
2) Compiling U-Boot for a MX28 based board
2) Compiling U-Boot for a MXS based board
-------------------------------------------
Compiling the U-Boot for a MX28 board is straightforward and done as compiling U-Boot
for any other ARM device. For cross-compiler setup, please refer to ELDK5.0
documentation. First, clean up the source code:
Compiling the U-Boot for a MXS board is straightforward and done as compiling
U-Boot for any other ARM device. For cross-compiler setup, please refer to
ELDK5.0 documentation. First, clean up the source code:
$ make mrproper
Next, configure U-Boot for a MX28 based board
Next, configure U-Boot for a MXS based board
$ make <mx28_based_board_name>_config
$ make <mxs_based_board_name>_config
Examples:
@ -83,8 +86,16 @@ Examples:
$ make mx28evk_config
3. For building U-boot for Freescale MX23EVK board:
$ make mx23evk_config
4. For building U-boot for Olimex MX23 Olinuxino board:
$ make mx23_olinuxino_config
Lastly, compile U-Boot and prepare a "BootStream". The "BootStream" is a special
type of file, which the i.MX28 CPU can boot. This is handled by the following
type of file, which MXS CPUs can boot. This is handled by the following
command:
$ make u-boot.sb
@ -96,18 +107,16 @@ The code produces "u-boot.sb" file. This file needs to be augmented with a
proper header to allow successful boot from SD or NAND. Adding the header is
discussed in the following chapters.
3) Installation of U-Boot for a MX28 based board to SD card
-----------------------------------------------------------
3) Installation of U-Boot for a MXS based board to SD card
----------------------------------------------------------
To boot a MX28 based board from SD, set the boot mode DIP switches according
to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=SSP0, SD/MMC master on
SSP0, 3.3V.
To boot a MXS based board from SD, set the boot mode DIP switches according to
to MX28 manual, section 12.2.1 (Table 12-2) or MX23 manual, section 35.1.2
(Table 35-3).
An SD card the i.MX28 CPU can use to boot U-Boot must contain a DOS partition
table, which in turn carries a partition of special type and which contains a
special header. The rest of partitions in the DOS partition table can be used
by the user.
The SD card used to boot U-Boot must contain a DOS partition table, which in
turn carries a partition of special type and which contains a special header.
The rest of partitions in the DOS partition table can be used by the user.
To prepare such partition, use your favourite partitioning tool. The partition
must have the following parameters:
@ -141,17 +150,17 @@ case, we assume the first partition of the SD card is /dev/mmcblk0p1:
$ dd if=u-boot.sd of=/dev/mmcblk0p1
Last step is to insert the card into MX28 based board and boot.
Last step is to insert the card into the MXS based board and boot.
NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains
a "-p" switch for that purpose. The "-p" switch takes the sector number as
an argument.
4) Installation of U-Boot into NAND flash
-----------------------------------------
4) Installation of U-Boot into NAND flash on a MX28 based board
---------------------------------------------------------------
To boot a MX28 based board from NAND, set the boot mode DIP switches according to i.MX28
manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
To boot a MX28 based board from NAND, set the boot mode DIP switches according
to MX28 manual section 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
There are two possibilities when preparing an image writable to NAND flash.
@ -214,7 +223,7 @@ There are two possibilities when preparing an image writable to NAND flash.
--------------------------------------------
There is a slight possibility of the user wanting to adjust the
STRIDE and COUNT options of the NAND boot. For description of these,
see i.MX28 manual section 12.12.1.2 and 12.12.1.3.
see MX28 manual section 12.12.1.2 and 12.12.1.3.
The update scripts take this possibility into account. In case the
user changes STRIDE by blowing fuses, the user also has to change

34
drivers/block/dwc_ahsata.c
View File

@ -447,10 +447,13 @@ static int ahci_exec_ata_cmd(struct ahci_probe_ent *probe_ent,
if (buf && buf_len)
sg_count = ahci_fill_sg(probe_ent, port, buf, buf_len);
opts = (sizeof(struct sata_fis_h2d) >> 2) | (sg_count << 16);
if (is_write)
if (is_write) {
opts |= 0x40;
flush_cache((ulong)buf, buf_len);
}
ahci_fill_cmd_slot(pp, cmd_slot, opts);
flush_cache((int)(pp->cmd_slot), AHCI_PORT_PRIV_DMA_SZ);
writel_with_flush(1 << cmd_slot, &(port_mmio->ci));
if (waiting_for_cmd_completed((u8 *)&(port_mmio->ci),
@ -458,8 +461,12 @@ static int ahci_exec_ata_cmd(struct ahci_probe_ent *probe_ent,
printf("timeout exit!\n");
return -1;
}
invalidate_dcache_range((int)(pp->cmd_slot),
(int)(pp->cmd_slot)+AHCI_PORT_PRIV_DMA_SZ);
debug("ahci_exec_ata_cmd: %d byte transferred.\n",
pp->cmd_slot->status);
if (!is_write)
invalidate_dcache_range((ulong)buf, (ulong)buf+buf_len);
return buf_len;
}
@ -468,7 +475,8 @@ static void ahci_set_feature(u8 dev, u8 port)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
@ -615,7 +623,8 @@ static void dwc_ahsata_identify(int dev, u16 *id)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
@ -645,7 +654,8 @@ static u32 dwc_ahsata_rw_cmd(int dev, u32 start, u32 blkcnt,
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
u32 block;
@ -675,7 +685,8 @@ void dwc_ahsata_flush_cache(int dev)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
@ -692,7 +703,8 @@ static u32 dwc_ahsata_rw_cmd_ext(int dev, u32 start, lbaint_t blkcnt,
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
u64 block;
@ -728,7 +740,8 @@ u32 dwc_ahsata_rw_ncq_cmd(int dev, u32 start, lbaint_t blkcnt,
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
u64 block;
@ -769,7 +782,8 @@ void dwc_ahsata_flush_cache_ext(int dev)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
struct sata_fis_h2d h2d __aligned(ARCH_DMA_MINALIGN);
struct sata_fis_h2d *cfis = &h2d;
u8 port = probe_ent->hard_port_no;
memset(cfis, 0, sizeof(struct sata_fis_h2d));
@ -912,7 +926,9 @@ int scan_sata(int dev)
u8 port = probe_ent->hard_port_no;
block_dev_desc_t *pdev = &(sata_dev_desc[dev]);
id = (u16 *)malloc(ATA_ID_WORDS * 2);
id = (u16 *)memalign(ARCH_DMA_MINALIGN,
roundup(ARCH_DMA_MINALIGN,
(ATA_ID_WORDS * 2)));
if (!id) {
printf("id malloc failed\n\r");
return -1;

2
drivers/gpio/omap_gpio.c
View File

@ -55,7 +55,7 @@ static inline int get_gpio_index(int gpio)
int gpio_is_valid(int gpio)
{
return (gpio >= 0) && (gpio < 192);
return (gpio >= 0) && (gpio < OMAP_MAX_GPIO);
}
static int check_gpio(int gpio)

6
drivers/gpio/s3c2440_gpio.c
View File

@ -61,7 +61,7 @@ int gpio_set_value(unsigned gpio, int value)
else
l &= ~bit;
return writel(port, l);
return writel(l, port);
}
int gpio_get_value(unsigned gpio)
@ -85,11 +85,11 @@ int gpio_free(unsigned gpio)
int gpio_direction_input(unsigned gpio)
{
return writel(GPIO_FULLPORT(gpio), GPIO_INPUT << GPIO_BIT(gpio));
return writel(GPIO_INPUT << GPIO_BIT(gpio), GPIO_FULLPORT(gpio));
}
int gpio_direction_output(unsigned gpio, int value)
{
writel(GPIO_FULLPORT(gpio), GPIO_OUTPUT << GPIO_BIT(gpio));
writel(GPIO_OUTPUT << GPIO_BIT(gpio), GPIO_FULLPORT(gpio));
return gpio_set_value(gpio, value);
}

9
drivers/gpio/s5p_gpio.c
View File

@ -48,15 +48,8 @@ void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
{
unsigned int value;
s5p_gpio_cfg_pin(bank, gpio, GPIO_OUTPUT);
value = readl(&bank->dat);
value &= ~DAT_MASK(gpio);
if (en)
value |= DAT_SET(gpio);
writel(value, &bank->dat);
s5p_gpio_set_value(bank, gpio, en);
}
void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)

3
drivers/i2c/s3c24x0_i2c.c
View File

@ -518,8 +518,9 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
#ifdef CONFIG_OF_CONTROL
void board_i2c_init(const void *blob)
{
int i;
int node_list[CONFIG_MAX_I2C_NUM];
int count, i;
int count;
count = fdtdec_find_aliases_for_id(blob, "i2c",
COMPAT_SAMSUNG_S3C2440_I2C, node_list,

23
drivers/net/fec_mxc.c
View File

@ -560,7 +560,6 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
}
memset(fec->tbd_base, 0, size);
fec_tbd_init(fec);
flush_dcache_range((unsigned)fec->tbd_base, size);
}
/*
@ -737,6 +736,28 @@ static int fec_send(struct eth_device *dev, void *packet, int length)
addr = (uint32_t)fec->tbd_base;
flush_dcache_range(addr, addr + size);
/*
* Below we read the DMA descriptor's last four bytes back from the
* DRAM. This is important in order to make sure that all WRITE
* operations on the bus that were triggered by previous cache FLUSH
* have completed.
*
* Otherwise, on MX28, it is possible to observe a corruption of the
* DMA descriptors. Please refer to schematic "Figure 1-2" in MX28RM
* for the bus structure of MX28. The scenario is as follows:
*
* 1) ARM core triggers a series of WRITEs on the AHB_ARB2 bus going
* to DRAM due to flush_dcache_range()
* 2) ARM core writes the FEC registers via AHB_ARB2
* 3) FEC DMA starts reading/writing from/to DRAM via AHB_ARB3
*
* Note that 2) does sometimes finish before 1) due to reordering of
* WRITE accesses on the AHB bus, therefore triggering 3) before the
* DMA descriptor is fully written into DRAM. This results in occasional
* corruption of the DMA descriptor.
*/
readl(addr + size - 4);
/*
* Enable SmartDMA transmit task
*/

13
drivers/power/battery/bat_trats.c
View File

@ -41,18 +41,23 @@ static int power_battery_charge(struct pmic *bat)
for (k = 0; bat->chrg->chrg_bat_present(p_bat->chrg) &&
bat->chrg->chrg_type(p_bat->muic) &&
battery->state_of_chrg < 100; k++) {
udelay(10000000);
puts(".");
udelay(2000000);
if (!(k % 5))
puts(".");
bat->fg->fg_battery_update(p_bat->fg, bat);
if (k == 100) {
if (k == 200) {
debug(" %d [V]", battery->voltage_uV);
puts("\n");
k = 0;
}
if (ctrlc()) {
printf("\nCharging disabled on request.\n");
goto exit;
}
}
exit:
bat->chrg->chrg_state(p_bat->chrg, CHARGER_DISABLE, 0);
return 0;

3
drivers/power/power_core.c
View File

@ -205,7 +205,8 @@ int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if (strcmp(argv[3], "charge") == 0) {
if (p->pbat) {
printf("PRINT BAT charge %s\n", p->name);
printf("BAT: %s charging (ctrl+c to break)\n",
p->name);
if (p->low_power_mode)
p->low_power_mode();
if (p->pbat->battery_charge)

78
drivers/serial/serial_s5p.c
View File

@ -22,6 +22,7 @@
*/
#include <common.h>
#include <fdtdec.h>
#include <linux/compiler.h>
#include <asm/io.h>
#include <asm/arch/uart.h>
@ -34,10 +35,21 @@ DECLARE_GLOBAL_DATA_PTR;
#define RX_FIFO_FULL_MASK (1 << 8)
#define TX_FIFO_FULL_MASK (1 << 24)
/* Information about a serial port */
struct fdt_serial {
u32 base_addr; /* address of registers in physical memory */
u8 port_id; /* uart port number */
u8 enabled; /* 1 if enabled, 0 if disabled */
} config __attribute__ ((section(".data")));
static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
{
#ifdef CONFIG_OF_CONTROL
return (struct s5p_uart *)(config.base_addr);
#else
u32 offset = dev_index * sizeof(struct s5p_uart);
return (struct s5p_uart *)(samsung_get_base_uart() + offset);
#endif
}
/*
@ -73,6 +85,16 @@ void serial_setbrg_dev(const int dev_index)
u32 baudrate = gd->baudrate;
u32 val;
#if defined(CONFIG_SILENT_CONSOLE) && \
defined(CONFIG_OF_CONTROL) && \
!defined(CONFIG_SPL_BUILD)
if (fdtdec_get_config_int(gd->fdt_blob, "silent_console", 0))
gd->flags |= GD_FLG_SILENT;
#endif
if (!config.enabled)
return;
val = uclk / baudrate;
writel(val / 16 - 1, &uart->ubrdiv);
@ -133,6 +155,9 @@ int serial_getc_dev(const int dev_index)
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
if (!config.enabled)
return 0;
/* wait for character to arrive */
while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
RX_FIFO_FULL_MASK))) {
@ -150,6 +175,9 @@ void serial_putc_dev(const char c, const int dev_index)
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
if (!config.enabled)
return;
/* wait for room in the tx FIFO */
while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (serial_err_check(dev_index, 1))
@ -170,6 +198,9 @@ int serial_tstc_dev(const int dev_index)
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
if (!config.enabled)
return 0;
return (int)(readl(&uart->utrstat) & 0x1);
}
@ -212,8 +243,54 @@ DECLARE_S5P_SERIAL_FUNCTIONS(3);
struct serial_device s5p_serial3_device =
INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3");
#ifdef CONFIG_OF_CONTROL
int fdtdec_decode_console(int *index, struct fdt_serial *uart)
{
const void *blob = gd->fdt_blob;
int node;
node = fdt_path_offset(blob, "console");
if (node < 0)
return node;
uart->base_addr = fdtdec_get_addr(blob, node, "reg");
if (uart->base_addr == FDT_ADDR_T_NONE)
return -FDT_ERR_NOTFOUND;
uart->port_id = fdtdec_get_int(blob, node, "id", -1);
uart->enabled = fdtdec_get_is_enabled(blob, node);
return 0;
}
#endif
__weak struct serial_device *default_serial_console(void)
{
#ifdef CONFIG_OF_CONTROL
int index = 0;
if ((!config.base_addr) && (fdtdec_decode_console(&index, &config))) {
debug("Cannot decode default console node\n");
return NULL;
}
switch (config.port_id) {
case 0:
return &s5p_serial0_device;
case 1:
return &s5p_serial1_device;
case 2:
return &s5p_serial2_device;
case 3:
return &s5p_serial3_device;
default:
debug("Unknown config.port_id: %d", config.port_id);
break;
}
return NULL;
#else
config.enabled = 1;
#if defined(CONFIG_SERIAL0)
return &s5p_serial0_device;
#elif defined(CONFIG_SERIAL1)
@ -225,6 +302,7 @@ __weak struct serial_device *default_serial_console(void)
#else
#error "CONFIG_SERIAL? missing."
#endif
#endif
}
void s5p_serial_initialize(void)

28
drivers/spi/mxc_spi.c
View File

@ -128,8 +128,8 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
u32 clk_src = mxc_get_clock(MXC_CSPI_CLK);
s32 pre_div = 0, post_div = 0, i, reg_ctrl, reg_config;
u32 ss_pol = 0, sclkpol = 0, sclkpha = 0;
s32 reg_ctrl, reg_config;
u32 ss_pol = 0, sclkpol = 0, sclkpha = 0, pre_div = 0, post_div = 0;
struct cspi_regs *regs = (struct cspi_regs *)mxcs->base;
if (max_hz == 0) {
@ -147,26 +147,20 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
reg_ctrl |= MXC_CSPICTRL_EN;
reg_write(&regs->ctrl, reg_ctrl);
/*
* The following computation is taken directly from Freescale's code.
*/
if (clk_src > max_hz) {
pre_div = DIV_ROUND_UP(clk_src, max_hz);
if (pre_div > 16) {
post_div = pre_div / 16;
pre_div = 15;
}
if (post_div != 0) {
for (i = 0; i < 16; i++) {
if ((1 << i) >= post_div)
break;
}
if (i == 16) {
pre_div = (clk_src - 1) / max_hz;
/* fls(1) = 1, fls(0x80000000) = 32, fls(16) = 5 */
post_div = fls(pre_div);
if (post_div > 4) {
post_div -= 4;
if (post_div >= 16) {
printf("Error: no divider for the freq: %d\n",
max_hz);
return -1;
}
post_div = i;
pre_div >>= post_div;
} else {
post_div = 0;
}
}

300
drivers/usb/host/ehci-tegra.c
View File

@ -1,6 +1,6 @@
/*
* Copyright (c) 2011 The Chromium OS Authors.
* Copyright (c) 2009-2012 NVIDIA Corporation
* Copyright (c) 2009-2013 NVIDIA Corporation
* Copyright (c) 2013 Lucas Stach
*
* See file CREDITS for list of people who contributed to this
@ -28,6 +28,8 @@
#include <asm-generic/gpio.h>
#include <asm/arch/clock.h>
#include <asm/arch-tegra/usb.h>
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch/usb.h>
#include <usb.h>
#include <usb/ulpi.h>
#include <libfdt.h>
@ -35,6 +37,11 @@
#include "ehci.h"
#define USB1_ADDR_MASK 0xFFFF0000
#define HOSTPC1_DEVLC 0x84
#define HOSTPC1_PSPD(x) (((x) >> 25) & 0x3)
#ifdef CONFIG_USB_ULPI
#ifndef CONFIG_USB_ULPI_VIEWPORT
#error "To use CONFIG_USB_ULPI on Tegra Boards you have to also \
@ -87,6 +94,8 @@ struct fdt_usb {
static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
static unsigned port_count; /* Number of available ports */
/* Port that needs to clear CSC after Port Reset */
static u32 port_addr_clear_csc;
/*
* This table has USB timing parameters for each Oscillator frequency we
@ -129,7 +138,7 @@ static unsigned port_count; /* Number of available ports */
*
* 4. The 20 microsecond delay after bias cell operation.
*/
static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
static const unsigned T20_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
/* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
{ 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
{ 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
@ -137,6 +146,22 @@ static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
{ 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
};
static const unsigned T30_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
/* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
{ 0x3C0, 0x0D, 0x00, 0xC, 1, 0x02, 0x33, 0x09, 0x7F, 0x7EF4, 5 },
{ 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x0C, 0xBB, 0xBB80, 7 },
{ 0x3C0, 0x0C, 0x00, 0xC, 1, 0x02, 0x2F, 0x08, 0x76, 0x7530, 5 },
{ 0x3C0, 0x1A, 0x00, 0xC, 1, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
};
static const unsigned T114_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
/* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
{ 0x3C0, 0x0D, 0x00, 0xC, 2, 0x02, 0x33, 0x09, 0x7F, 0x7EF4, 6 },
{ 0x0C8, 0x04, 0x00, 0x3, 2, 0x03, 0x4B, 0x0C, 0xBB, 0xBB80, 8 },
{ 0x3C0, 0x0C, 0x00, 0xC, 2, 0x02, 0x2F, 0x08, 0x76, 0x7530, 5 },
{ 0x3C0, 0x1A, 0x00, 0xC, 2, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 0xB }
};
/* UTMIP Idle Wait Delay */
static const u8 utmip_idle_wait_delay = 17;
@ -146,6 +171,33 @@ static const u8 utmip_elastic_limit = 16;
/* UTMIP High Speed Sync Start Delay */
static const u8 utmip_hs_sync_start_delay = 9;
struct fdt_usb_controller {
int compat;
/* flag to determine whether controller supports hostpc register */
u32 has_hostpc:1;
const unsigned *pll_parameter;
};
static struct fdt_usb_controller fdt_usb_controllers[] = {
{
.compat = COMPAT_NVIDIA_TEGRA20_USB,
.has_hostpc = 0,
.pll_parameter = (const unsigned *)T20_usb_pll,
},
{
.compat = COMPAT_NVIDIA_TEGRA30_USB,
.has_hostpc = 1,
.pll_parameter = (const unsigned *)T30_usb_pll,
},
{
.compat = COMPAT_NVIDIA_TEGRA114_USB,
.has_hostpc = 1,
.pll_parameter = (const unsigned *)T114_usb_pll,
},
};
static struct fdt_usb_controller *controller;
/*
* A known hardware issue where Connect Status Change bit of PORTSC register
* of USB1 controller will be set after Port Reset.
@ -156,13 +208,52 @@ static const u8 utmip_hs_sync_start_delay = 9;
void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
{
mdelay(50);
if (((u32) status_reg & TEGRA_USB_ADDR_MASK) != TEGRA_USB1_BASE)
/* This is to avoid PORT_ENABLE bit to be cleared in "ehci-hcd.c". */
if (controller->has_hostpc)
*reg |= EHCI_PS_PE;
if (((u32)status_reg & TEGRA_USB_ADDR_MASK) != port_addr_clear_csc)
return;
/* For EHCI_PS_CSC to be cleared in ehci_hcd.c */
if (ehci_readl(status_reg) & EHCI_PS_CSC)
*reg |= EHCI_PS_CSC;
}
/*
* This ehci_set_usbmode overrides the weak function ehci_set_usbmode
* in "ehci-hcd.c".
*/
void ehci_set_usbmode(int index)
{
struct fdt_usb *config;
struct usb_ctlr *usbctlr;
uint32_t tmp;
config = &port[index];
usbctlr = config->reg;
tmp = ehci_readl(&usbctlr->usb_mode);
tmp |= USBMODE_CM_HC;
ehci_writel(&usbctlr->usb_mode, tmp);
}
/*
* This ehci_get_port_speed overrides the weak function ehci_get_port_speed
* in "ehci-hcd.c".
*/
int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
{
uint32_t tmp;
uint32_t *reg_ptr;
if (controller->has_hostpc) {
reg_ptr = (uint32_t *)((u8 *)&hcor->or_usbcmd + HOSTPC1_DEVLC);
tmp = ehci_readl(reg_ptr);
return HOSTPC1_PSPD(tmp);
} else
return PORTSC_PSPD(reg);
}
/* Put the port into host mode */
static void set_host_mode(struct fdt_usb *config)
{
@ -209,6 +300,16 @@ void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
}
static const unsigned *get_pll_timing(void)
{
const unsigned *timing;
timing = controller->pll_parameter +
clock_get_osc_freq() * PARAM_COUNT;
return timing;
}
/* set up the UTMI USB controller with the parameters provided */
static int init_utmi_usb_controller(struct fdt_usb *config)
{
@ -216,6 +317,8 @@ static int init_utmi_usb_controller(struct fdt_usb *config)
int loop_count;
const unsigned *timing;
struct usb_ctlr *usbctlr = config->reg;
struct clk_rst_ctlr *clkrst;
struct usb_ctlr *usb1ctlr;
clock_enable(config->periph_id);
@ -232,35 +335,97 @@ static int init_utmi_usb_controller(struct fdt_usb *config)
* To Use the A Session Valid for cable detection logic, VBUS_WAKEUP
* mux must be switched to actually use a_sess_vld threshold.
*/
if (fdt_gpio_isvalid(&config->vbus_gpio)) {
if (config->dr_mode == DR_MODE_OTG &&
fdt_gpio_isvalid(&config->vbus_gpio))
clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
VBUS_SENSE_CTL_MASK,
VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
}
/*
* PLL Delay CONFIGURATION settings. The following parameters control
* the bring up of the plls.
*/
timing = usb_pll[clock_get_osc_freq()];
timing = get_pll_timing();
val = readl(&usbctlr->utmip_misc_cfg1);
clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
timing[PARAM_ACTIVE_DELAY_COUNT] <<
UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
writel(val, &usbctlr->utmip_misc_cfg1);
if (!controller->has_hostpc) {
val = readl(&usbctlr->utmip_misc_cfg1);
clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
timing[PARAM_STABLE_COUNT] <<
UTMIP_PLLU_STABLE_COUNT_SHIFT);
clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
timing[PARAM_ACTIVE_DELAY_COUNT] <<
UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
writel(val, &usbctlr->utmip_misc_cfg1);
/* Set PLL enable delay count and crystal frequency count */
val = readl(&usbctlr->utmip_pll_cfg1);
clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
timing[PARAM_ENABLE_DELAY_COUNT] <<
UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
timing[PARAM_XTAL_FREQ_COUNT] <<
UTMIP_XTAL_FREQ_COUNT_SHIFT);
writel(val, &usbctlr->utmip_pll_cfg1);
/* Set PLL enable delay count and crystal frequency count */
val = readl(&usbctlr->utmip_pll_cfg1);
clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
timing[PARAM_ENABLE_DELAY_COUNT] <<
UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
timing[PARAM_XTAL_FREQ_COUNT] <<
UTMIP_XTAL_FREQ_COUNT_SHIFT);
writel(val, &usbctlr->utmip_pll_cfg1);
} else {
clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
val = readl(&clkrst->crc_utmip_pll_cfg2);
clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
timing[PARAM_STABLE_COUNT] <<
UTMIP_PLLU_STABLE_COUNT_SHIFT);
clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
timing[PARAM_ACTIVE_DELAY_COUNT] <<
UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
writel(val, &clkrst->crc_utmip_pll_cfg2);
/* Set PLL enable delay count and crystal frequency count */
val = readl(&clkrst->crc_utmip_pll_cfg1);
clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
timing[PARAM_ENABLE_DELAY_COUNT] <<
UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
timing[PARAM_XTAL_FREQ_COUNT] <<
UTMIP_XTAL_FREQ_COUNT_SHIFT);
writel(val, &clkrst->crc_utmip_pll_cfg1);
/* Disable Power Down state for PLL */
clrbits_le32(&clkrst->crc_utmip_pll_cfg1,
PLLU_POWERDOWN | PLL_ENABLE_POWERDOWN |
PLL_ACTIVE_POWERDOWN);
/* Recommended PHY settings for EYE diagram */
val = readl(&usbctlr->utmip_xcvr_cfg0);
clrsetbits_le32(&val, UTMIP_XCVR_SETUP_MASK,
0x4 << UTMIP_XCVR_SETUP_SHIFT);
clrsetbits_le32(&val, UTMIP_XCVR_SETUP_MSB_MASK,
0x3 << UTMIP_XCVR_SETUP_MSB_SHIFT);
clrsetbits_le32(&val, UTMIP_XCVR_HSSLEW_MSB_MASK,
0x8 << UTMIP_XCVR_HSSLEW_MSB_SHIFT);
writel(val, &usbctlr->utmip_xcvr_cfg0);
clrsetbits_le32(&usbctlr->utmip_xcvr_cfg1,
UTMIP_XCVR_TERM_RANGE_ADJ_MASK,
0x7 << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT);
/* Some registers can be controlled from USB1 only. */
if (config->periph_id != PERIPH_ID_USBD) {
clock_enable(PERIPH_ID_USBD);
/* Disable Reset if in Reset state */
reset_set_enable(PERIPH_ID_USBD, 0);
}
usb1ctlr = (struct usb_ctlr *)
((u32)config->reg & USB1_ADDR_MASK);
val = readl(&usb1ctlr->utmip_bias_cfg0);
setbits_le32(&val, UTMIP_HSDISCON_LEVEL_MSB);
clrsetbits_le32(&val, UTMIP_HSDISCON_LEVEL_MASK,
0x1 << UTMIP_HSDISCON_LEVEL_SHIFT);
clrsetbits_le32(&val, UTMIP_HSSQUELCH_LEVEL_MASK,
0x2 << UTMIP_HSSQUELCH_LEVEL_SHIFT);
writel(val, &usb1ctlr->utmip_bias_cfg0);
/* Miscellaneous setting mentioned in Programming Guide */
clrbits_le32(&usbctlr->utmip_misc_cfg0,
UTMIP_SUSPEND_EXIT_ON_EDGE);
}
/* Setting the tracking length time */
clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
@ -308,6 +473,14 @@ static int init_utmi_usb_controller(struct fdt_usb *config)
/* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */
setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
if (controller->has_hostpc) {
if (config->periph_id == PERIPH_ID_USBD)
clrbits_le32(&clkrst->crc_utmip_pll_cfg2,
UTMIP_FORCE_PD_SAMP_A_POWERDOWN);
if (config->periph_id == PERIPH_ID_USB3)
clrbits_le32(&clkrst->crc_utmip_pll_cfg2,
UTMIP_FORCE_PD_SAMP_C_POWERDOWN);
}
/* Finished the per-controller init. */
/* De-assert UTMIP_RESET to bring out of reset. */
@ -336,6 +509,18 @@ static int init_utmi_usb_controller(struct fdt_usb *config)
clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN |
UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN);
if (controller->has_hostpc) {
/*
* BIAS Pad Power Down is common among all 3 USB
* controllers and can be controlled from USB1 only.
*/
usb1ctlr = (struct usb_ctlr *)
((u32)config->reg & USB1_ADDR_MASK);
clrbits_le32(&usb1ctlr->utmip_bias_cfg0, UTMIP_BIASPD);
udelay(25);
clrbits_le32(&usb1ctlr->utmip_bias_cfg1,
UTMIP_FORCE_PDTRK_POWERDOWN);
}
return 0;
}
@ -438,7 +623,7 @@ static void config_clock(const u32 timing[])
timing[PARAM_CPCON], timing[PARAM_LFCON]);
}
int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config)
static int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config)
{
const char *phy, *mode;
@ -466,6 +651,8 @@ int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config)
config->enabled = fdtdec_get_is_enabled(blob, node);
config->has_legacy_mode = fdtdec_get_bool(blob, node,
"nvidia,has-legacy-mode");
if (config->has_legacy_mode)
port_addr_clear_csc = (u32) config->reg;
config->periph_id = clock_decode_periph_id(blob, node);
if (config->periph_id == PERIPH_ID_NONE) {
debug("%s: Missing/invalid peripheral ID\n", __func__);
@ -483,20 +670,22 @@ int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config)
return 0;
}
int board_usb_init(const void *blob)
/*
* process_usb_nodes() - Process a list of USB nodes, adding them to our list
* of USB ports.
* @blob: fdt blob
* @node_list: list of nodes to process (any <=0 are ignored)
* @count: number of nodes to process
*
* Return: 0 - ok, -1 - error
*/
static int process_usb_nodes(const void *blob, int node_list[], int count)
{
struct fdt_usb config;
enum clock_osc_freq freq;
int node_list[USB_PORTS_MAX];
int node, count, i;
int node, i;
int clk_done = 0;
/* Set up the USB clocks correctly based on our oscillator frequency */
freq = clock_get_osc_freq();
config_clock(usb_pll[freq]);
/* count may return <0 on error */
count = fdtdec_find_aliases_for_id(blob, "usb",
COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
port_count = 0;
for (i = 0; i < count; i++) {
if (port_count == USB_PORTS_MAX) {
printf("tegrausb: Cannot register more than %d ports\n",
@ -513,6 +702,10 @@ int board_usb_init(const void *blob)
fdt_get_name(blob, node, NULL));
return -1;
}
if (!clk_done) {
config_clock(get_pll_timing());
clk_done = 1;
}
config.initialized = 0;
/* add new USB port to the list of available ports */
@ -522,6 +715,31 @@ int board_usb_init(const void *blob)
return 0;
}
int board_usb_init(const void *blob)
{
int node_list[USB_PORTS_MAX];
int count, err = 0;
int i;
for (i = 0; i < ARRAY_SIZE(fdt_usb_controllers); i++) {
controller = &fdt_usb_controllers[i];
count = fdtdec_find_aliases_for_id(blob, "usb",
controller->compat, node_list, USB_PORTS_MAX);
if (count) {
err = process_usb_nodes(blob, node_list, count);
if (err)
printf("%s: Error processing USB node!\n",
__func__);
return err;
}
}
if (i == ARRAY_SIZE(fdt_usb_controllers))
controller = NULL;
return err;
}
/**
* Start up the given port number (ports are numbered from 0 on each board).
* This returns values for the appropriate hccr and hcor addresses to use for
@ -564,6 +782,20 @@ success:
usbctlr = config->reg;
*hccr = (struct ehci_hccr *)&usbctlr->cap_length;
*hcor = (struct ehci_hcor *)&usbctlr->usb_cmd;
if (controller->has_hostpc) {
/* Set to Host mode after Controller Reset was done */
clrsetbits_le32(&usbctlr->usb_mode, USBMODE_CM_HC,
USBMODE_CM_HC);
/* Select UTMI parallel interface after setting host mode */
if (config->utmi) {
clrsetbits_le32((char *)&usbctlr->usb_cmd +
HOSTPC1_DEVLC, PTS_MASK,
PTS_UTMI << PTS_SHIFT);
clrbits_le32((char *)&usbctlr->usb_cmd +
HOSTPC1_DEVLC, STS);
}
}
return 0;
}

42
drivers/usb/ulpi/omap-ulpi-viewport.c
View File

@ -22,18 +22,19 @@
#include <asm/io.h>
#include <usb/ulpi.h>
#define OMAP_ULPI_WR_OPSEL (3 << 21)
#define OMAP_ULPI_ACCESS (1 << 31)
#define OMAP_ULPI_WR_OPSEL (2 << 22)
#define OMAP_ULPI_RD_OPSEL (3 << 22)
#define OMAP_ULPI_START (1 << 31)
/*
* Wait for the ULPI Access to complete
* Wait for having ulpi in done state
*/
static int ulpi_wait(struct ulpi_viewport *ulpi_vp, u32 mask)
{
int timeout = CONFIG_USB_ULPI_TIMEOUT;
while (--timeout) {
if ((readl(ulpi_vp->viewport_addr) & mask))
if (!(readl(ulpi_vp->viewport_addr) & mask))
return 0;
udelay(1);
@ -42,27 +43,6 @@ static int ulpi_wait(struct ulpi_viewport *ulpi_vp, u32 mask)
return ULPI_ERROR;
}
/*
* Wake the ULPI PHY up for communication
*
* returns 0 on success.
*/
static int ulpi_wakeup(struct ulpi_viewport *ulpi_vp)
{
int err;
if (readl(ulpi_vp->viewport_addr) & OMAP_ULPI_ACCESS)
return 0; /* already awake */
writel(OMAP_ULPI_ACCESS, ulpi_vp->viewport_addr);
err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS);
if (err)
debug("ULPI wakeup timed out\n");
return err;
}
/*
* Issue a ULPI read/write request
*/
@ -70,13 +50,9 @@ static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value)
{
int err;
err = ulpi_wakeup(ulpi_vp);
if (err)
return err;
writel(value, ulpi_vp->viewport_addr);
err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS);
err = ulpi_wait(ulpi_vp, OMAP_ULPI_START);
if (err)
debug("ULPI request timed out\n");
@ -85,7 +61,7 @@ static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value)
int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value)
{
u32 val = ((ulpi_vp->port_num & 0xf) << 24) |
u32 val = OMAP_ULPI_START | (((ulpi_vp->port_num + 1) & 0xf) << 24) |
OMAP_ULPI_WR_OPSEL | ((u32)reg << 16) | (value & 0xff);
return ulpi_request(ulpi_vp, val);
@ -94,8 +70,8 @@ int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value)
u32 ulpi_read(struct ulpi_viewport *ulpi_vp, u8 *reg)
{
int err;
u32 val = ((ulpi_vp->port_num & 0xf) << 24) |
OMAP_ULPI_WR_OPSEL | ((u32)reg << 16);
u32 val = OMAP_ULPI_START | (((ulpi_vp->port_num + 1) & 0xf) << 24) |
OMAP_ULPI_RD_OPSEL | ((u32)reg << 16);
err = ulpi_request(ulpi_vp, val);
if (err)

3
drivers/video/exynos_fimd.c
View File

@ -280,8 +280,9 @@ void exynos_fimd_lcd_init(vidinfo_t *vid)
node, "reg");
if (fimd_ctrl == NULL)
debug("Can't get the FIMD base address\n");
#endif
#else
fimd_ctrl = (struct exynos_fb *)samsung_get_base_fimd();
#endif
offset = exynos_fimd_get_base_offset();

2
drivers/video/mxsfb.c
View File

@ -137,7 +137,7 @@ void *video_hw_init(void)
/* Suck display configuration from "videomode" variable */
penv = getenv("videomode");
if (!penv) {
printf("MXSFB: 'videomode' variable not set!");
puts("MXSFB: 'videomode' variable not set!\n");
return NULL;
}

14
include/configs/beaver.h
View File

@ -71,6 +71,20 @@
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
/* General networking support */
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

14
include/configs/cardhu.h
View File

@ -70,6 +70,20 @@
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
/* General networking support */
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

14
include/configs/dalmore.h
View File

@ -75,6 +75,20 @@
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
/* General networking support */
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

12
include/configs/exynos5250-dt.h
View File

@ -86,9 +86,9 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL3 /* use SERIAL 3 */
#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
#define CONFIG_SILENT_CONSOLE
/* Enable keyboard */
#define CONFIG_CROS_EC /* CROS_EC protocol */
@ -120,6 +120,7 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SKIP_LOWLEVEL_INIT
/* PWM */
#define CONFIG_PWM
@ -153,6 +154,7 @@
#define CONFIG_USB_STORAGE
/* USB boot mode */
#define CONFIG_USB_BOOTING
#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070
#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
@ -168,8 +170,10 @@
#define CONFIG_SPL
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_LIBCOMMON_SUPPORT
/* specific .lds file */
#define CONFIG_SPL_LDSCRIPT "board/samsung/smdk5250/smdk5250-uboot-spl.lds"
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x02023400
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
@ -245,7 +249,7 @@
#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
#define OM_STAT (0x1f << 1)
#define CONFIG_SPI_BOOTING
#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
@ -257,7 +261,7 @@
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
/* I2C */
#define CONFIG_SYS_I2C_INIT_BOARD

9
include/configs/harmony.h
View File

@ -49,6 +49,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_HARMONY
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */
/* SD/MMC */
#define CONFIG_MMC
@ -83,6 +84,14 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
/* LCD support */
#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
#define CONFIG_VIDEO_TEGRA
#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CONSOLE_SCROLL_LINES 10
#include "tegra-common-post.h"
#endif /* __CONFIG_H */

1
include/configs/m28evk.h
View File

@ -70,6 +70,7 @@
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING

4
include/configs/mx51evk.h
View File

@ -162,8 +162,8 @@
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcpart=2\0" \
"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \

4
include/configs/mx53ard.h
View File

@ -118,8 +118,8 @@
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=2\0" \
"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"update_sd_firmware_filename=u-boot.imx\0" \
"update_sd_firmware=" \
"if test ${ip_dyn} = yes; then " \

4
include/configs/mx53loco.h
View File

@ -124,8 +124,8 @@
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcpart=2\0" \
"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
"mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \

2
include/configs/mx6qsabreauto.h
View File

@ -30,7 +30,7 @@
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#include "mx6qsabre_common.h"
#include "mx6sabre_common.h"
#define CONFIG_SYS_FSL_USDHC_NUM 2
#if defined(CONFIG_ENV_IS_IN_MMC)

Some files were not shown because too many files have changed in this diff Show More