DRA7: Add support for ES1.1 silicon ID code

ES1.1 silicon is a very minor variant of ES1.0. Add priliminary support
for ES1.1 IDCODE change.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
This commit is contained in:
Nishanth Menon 2014-01-14 10:54:42 -06:00 committed by Tom Rini
parent c00b09218c
commit ef236f2929
7 changed files with 14 additions and 4 deletions

View File

@ -436,7 +436,7 @@ static void setup_non_essential_dplls(void)
#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
if (omap_revision() == DRA752_ES1_0)
if (is_dra7xx())
/* Select the sys clk for dpll_abe */
clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel,
CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK,

View File

@ -193,8 +193,7 @@ void emif_update_timings(u32 base, const struct emif_regs *regs)
writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
if ((omap_revision() >= OMAP5430_ES1_0) ||
(omap_revision() == DRA752_ES1_0)) {
if ((omap_revision() >= OMAP5430_ES1_0) || is_dra7xx()) {
writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
&emif->emif_l3_config);
} else if (omap_revision() >= OMAP4460_ES1_0) {
@ -306,7 +305,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
* The same sequence should work on OMAP5432 as well. But strange that
* it is not working
*/
if (omap_revision() == DRA752_ES1_0) {
if (is_dra7xx()) {
do_ext_phy_settings(base, regs);
writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
writel(regs->sdram_config_init, &emif->emif_sdram_config);

View File

@ -639,6 +639,7 @@ void hw_data_init(void)
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
*prcm = &dra7xx_prcm;
*dplls_data = &dra7xx_dplls;
*omap_vcores = &dra752_volts;
@ -666,6 +667,7 @@ void get_ioregs(const struct ctrl_ioregs **regs)
*regs = &ioregs_omap5432_es2;
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
*regs = &ioregs_dra7xx_es1;
break;

View File

@ -339,6 +339,9 @@ void init_omap_revision(void)
case DRA752_CONTROL_ID_CODE_ES1_0:
*omap_si_rev = DRA752_ES1_0;
break;
case DRA752_CONTROL_ID_CODE_ES1_1:
*omap_si_rev = DRA752_ES1_1;
break;
default:
*omap_si_rev = OMAP5430_SILICON_ID_INVALID;
}

View File

@ -245,6 +245,7 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
switch (emif_nr) {
case 1:
*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
@ -273,6 +274,7 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
*dmm_lisa_regs = &lisa_map_4G_x_2_x_2;
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
default:
*dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2;
}
@ -460,6 +462,7 @@ static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
*size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
if (emif_nr == 1) {
*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
*size =
@ -626,6 +629,7 @@ const struct read_write_regs *get_bug_regs(u32 *iterations)
sizeof(omap5_bug_00339_regs[0]);
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
bug_00339_regs_ptr = dra_bug_00339_regs;
*iterations = sizeof(dra_bug_00339_regs)/
sizeof(dra_bug_00339_regs[0]);

View File

@ -44,6 +44,7 @@
#define OMAP5432_CONTROL_ID_CODE_ES1_0 0x0B99802F
#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F
#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F
#define DRA752_CONTROL_ID_CODE_ES1_1 0x1B99002F
/* UART */
#define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000)

View File

@ -645,6 +645,7 @@ static inline u8 is_dra7xx(void)
/* DRA7XX */
#define DRA752_ES1_0 0x07520100
#define DRA752_ES1_1 0x07520110
/*
* SRAM scratch space entries