ARM: tegra: remove "0, " from DT unit addresses

Apparently the unit address in a DT node name is now supposed to be a
single integer value, rather than a comma-separated list of individual
cell values. Fix the U-Boot DTs to comply with this naming convention.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
This commit is contained in:
Stephen Warren 2016-09-13 10:45:49 -06:00 committed by Tom Warren
parent 6a474db489
commit eb631d7fb0
7 changed files with 82 additions and 82 deletions

View File

@ -15,8 +15,8 @@
i2c3 = "/i2c@7000c500";
i2c4 = "/i2c@7000c700";
i2c5 = "/i2c@7000d100";
rtc0 = "/i2c@0,7000d000/pmic@40";
rtc1 = "/rtc@0,7000e000";
rtc0 = "/i2c@7000d000/pmic@40";
rtc1 = "/rtc@7000e000";
mmc0 = "/sdhci@700b0600";
mmc1 = "/sdhci@700b0400";
spi0 = "/spi@7000d400";
@ -58,7 +58,7 @@
ddc-i2c-bus = <&dpaux>;
};
sdhci@0,700b0400 { /* SD Card on this bus */
sdhci@700b0400 { /* SD Card on this bus */
wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
};
@ -69,7 +69,7 @@
nvidia,model = "GoogleNyanBig";
};
pinmux@0,70000868 {
pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&pinmux_default>;

View File

@ -3,8 +3,8 @@
/ {
aliases {
rtc0 = "/i2c@0,7000d000/pmic@40";
rtc1 = "/rtc@0,7000e000";
rtc0 = "/i2c@7000d000/pmic@40";
rtc1 = "/rtc@7000e000";
serial0 = &uarta;
};

View File

@ -11,35 +11,35 @@
};
aliases {
i2c0 = "/i2c@0,7000d000";
mmc0 = "/sdhci@0,700b0600";
mmc1 = "/sdhci@0,700b0000";
usb0 = "/usb@0,7d000000";
i2c0 = "/i2c@7000d000";
mmc0 = "/sdhci@700b0600";
mmc1 = "/sdhci@700b0000";
usb0 = "/usb@7d000000";
};
memory {
reg = <0x0 0x80000000 0x0 0xc0000000>;
};
sdhci@0,700b0000 {
sdhci@700b0000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@0,700b0600 {
sdhci@700b0600 {
status = "okay";
bus-width = <8>;
non-removable;
};
i2c@0,7000d000 {
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
};
usb@0,7d000000 {
usb@7d000000 {
status = "okay";
dr_mode = "peripheral";
};

View File

@ -11,35 +11,35 @@
};
aliases {
i2c0 = "/i2c@0,7000d000";
mmc0 = "/sdhci@0,700b0600";
mmc1 = "/sdhci@0,700b0000";
usb0 = "/usb@0,7d000000";
i2c0 = "/i2c@7000d000";
mmc0 = "/sdhci@700b0600";
mmc1 = "/sdhci@700b0000";
usb0 = "/usb@7d000000";
};
memory {
reg = <0x0 0x80000000 0x0 0xc0000000>;
};
sdhci@0,700b0000 {
sdhci@700b0000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@0,700b0600 {
sdhci@700b0600 {
status = "okay";
bus-width = <8>;
non-removable;
};
i2c@0,7000d000 {
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
};
usb@0,7d000000 {
usb@7d000000 {
status = "okay";
dr_mode = "otg";
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;

View File

@ -11,17 +11,17 @@
};
aliases {
i2c0 = "/i2c@0,7000d000";
mmc0 = "/sdhci@0,700b0600";
mmc1 = "/sdhci@0,700b0000";
usb0 = "/usb@0,7d000000";
i2c0 = "/i2c@7000d000";
mmc0 = "/sdhci@700b0600";
mmc1 = "/sdhci@700b0000";
usb0 = "/usb@7d000000";
};
memory {
reg = <0x0 0x80000000 0x0 0xc0000000>;
};
pcie-controller@0,01003000 {
pcie-controller@01003000 {
status = "okay";
pci@1,0 {
@ -33,7 +33,7 @@
};
};
padctl@0,7009f000 {
padctl@7009f000 {
pinctrl-0 = <&padctl_default>;
pinctrl-names = "default";
@ -71,7 +71,7 @@
};
};
sdhci@0,700b0000 {
sdhci@700b0000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
power-gpios = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
@ -79,18 +79,18 @@
bus-width = <4>;
};
sdhci@0,700b0600 {
sdhci@700b0600 {
status = "okay";
bus-width = <8>;
non-removable;
};
i2c@0,7000d000 {
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
};
usb@0,7d000000 {
usb@7d000000 {
status = "okay";
dr_mode = "otg";
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;

View File

@ -11,83 +11,83 @@
};
aliases {
i2c0 = "/i2c@0,7000d000";
i2c1 = "/i2c@0,7000c000";
i2c2 = "/i2c@0,7000c400";
i2c3 = "/i2c@0,7000c500";
i2c4 = "/i2c@0,7000c700";
i2c5 = "/i2c@0,7000d100";
mmc0 = "/sdhci@0,700b0600";
mmc1 = "/sdhci@0,700b0000";
spi0 = "/spi@0,7000d400";
spi1 = "/spi@0,7000da00";
spi2 = "/spi@0,70410000";
usb0 = "/usb@0,7d000000";
i2c0 = "/i2c@7000d000";
i2c1 = "/i2c@7000c000";
i2c2 = "/i2c@7000c400";
i2c3 = "/i2c@7000c500";
i2c4 = "/i2c@7000c700";
i2c5 = "/i2c@7000d100";
mmc0 = "/sdhci@700b0600";
mmc1 = "/sdhci@700b0000";
spi0 = "/spi@7000d400";
spi1 = "/spi@7000da00";
spi2 = "/spi@70410000";
usb0 = "/usb@7d000000";
};
memory {
reg = <0x0 0x80000000 0x0 0xc0000000>;
};
i2c@0,7000c000 {
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
};
i2c@0,7000c400 {
i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
};
i2c@0,7000c500 {
i2c@7000c500 {
status = "okay";
clock-frequency = <100000>;
};
i2c@0,7000c700 {
i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
i2c@0,7000d000 {
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
};
i2c@0,7000d100 {
i2c@7000d100 {
status = "okay";
clock-frequency = <400000>;
};
spi@0,7000d400 {
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
};
spi@0,7000da00 {
spi@7000da00 {
status = "okay";
spi-max-frequency = <25000000>;
};
spi@0,70410000 {
spi@70410000 {
status = "okay";
spi-max-frequency = <24000000>;
};
sdhci@0,700b0000 {
sdhci@700b0000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@0,700b0600 {
sdhci@700b0600 {
status = "okay";
bus-width = <8>;
non-removable;
};
usb@0,7d000000 {
usb@7d000000 {
status = "okay";
dr_mode = "otg";
};

View File

@ -12,7 +12,7 @@
#address-cells = <2>;
#size-cells = <2>;
pcie-controller@0,01003000 {
pcie-controller@01003000 {
compatible = "nvidia,tegra210-pcie";
device_type = "pci";
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
@ -78,7 +78,7 @@
};
};
gic: interrupt-controller@0,50041000 {
gic: interrupt-controller@50041000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupt-controller;
@ -91,14 +91,14 @@
interrupt-parent = <&gic>;
};
tegra_car: clock@0,60006000 {
tegra_car: clock@60006000 {
compatible = "nvidia,tegra210-car";
reg = <0x0 0x60006000 0x0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
gpio: gpio@0,6000d000 {
gpio: gpio@6000d000 {
compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
reg = <0x0 0x6000d000 0x0 0x1000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
@ -115,7 +115,7 @@
interrupt-controller;
};
i2c@0,7000c000 {
i2c@7000c000 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000c000 0x0 0x100>;
interrupts = <0 38 0x04>;
@ -125,7 +125,7 @@
status = "disabled";
};
i2c@0,7000c400 {
i2c@7000c400 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000c400 0x0 0x100>;
interrupts = <0 84 0x04>;
@ -135,7 +135,7 @@
status = "disabled";
};
i2c@0,7000c500 {
i2c@7000c500 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000c500 0x0 0x100>;
interrupts = <0 92 0x04>;
@ -145,7 +145,7 @@
status = "disabled";
};
i2c@0,7000c700 {
i2c@7000c700 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000c700 0x0 0x100>;
interrupts = <0 120 0x04>;
@ -155,7 +155,7 @@
status = "disabled";
};
i2c@0,7000d000 {
i2c@7000d000 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000d000 0x0 0x100>;
interrupts = <0 53 0x04>;
@ -165,7 +165,7 @@
status = "disabled";
};
i2c@0,7000d100 {
i2c@7000d100 {
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x7000d100 0x0 0x100>;
interrupts = <0 53 0x04>;
@ -175,7 +175,7 @@
status = "disabled";
};
uarta: serial@0,70006000 {
uarta: serial@70006000 {
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006000 0x0 0x40>;
reg-shift = <2>;
@ -186,7 +186,7 @@
status = "disabled";
};
uartb: serial@0,70006040 {
uartb: serial@70006040 {
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006040 0x0 0x40>;
reg-shift = <2>;
@ -197,7 +197,7 @@
status = "disabled";
};
uartc: serial@0,70006200 {
uartc: serial@70006200 {
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006200 0x0 0x40>;
reg-shift = <2>;
@ -208,7 +208,7 @@
status = "disabled";
};
uartd: serial@0,70006300 {
uartd: serial@70006300 {
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006300 0x0 0x40>;
reg-shift = <2>;
@ -219,7 +219,7 @@
status = "disabled";
};
spi@0,7000d400 {
spi@7000d400 {
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
reg = <0x0 0x7000d400 0x0 0x200>;
interrupts = <0 59 0x04>;
@ -231,7 +231,7 @@
status = "disabled";
};
spi@0,7000d600 {
spi@7000d600 {
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
reg = <0x0 0x7000d600 0x0 0x200>;
interrupts = <0 82 0x04>;
@ -243,7 +243,7 @@
status = "disabled";
};
spi@0,7000d800 {
spi@7000d800 {
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
reg = <0x0 0x7000d800 0x0 0x200>;
interrupts = <0 83 0x04>;
@ -255,7 +255,7 @@
status = "disabled";
};
spi@0,7000da00 {
spi@7000da00 {
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
reg = <0x0 0x7000da00 0x0 0x200>;
interrupts = <0 93 0x04>;
@ -267,7 +267,7 @@
status = "disabled";
};
spi@0,70410000 {
spi@70410000 {
compatible = "nvidia,tegra210-qspi";
reg = <0x0 0x70410000 0x0 0x1000>;
interrupts = <0 10 0x04>;
@ -277,7 +277,7 @@
status = "disabled";
};
padctl: padctl@0,7009f000 {
padctl: padctl@7009f000 {
compatible = "nvidia,tegra210-xusb-padctl";
reg = <0x0 0x7009f000 0x0 0x1000>;
resets = <&tegra_car 142>;
@ -285,7 +285,7 @@
#phy-cells = <1>;
};
sdhci@0,700b0000 {
sdhci@700b0000 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <0 14 0x04>;
@ -295,7 +295,7 @@
status = "disabled";
};
sdhci@0,700b0200 {
sdhci@700b0200 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0200 0x0 0x200>;
interrupts = <0 15 0x04>;
@ -305,7 +305,7 @@
status = "disabled";
};
sdhci@0,700b0400 {
sdhci@700b0400 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0400 0x0 0x200>;
interrupts = <0 19 0x04>;
@ -315,7 +315,7 @@
status = "disabled";
};
sdhci@0,700b0600 {
sdhci@700b0600 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0600 0x0 0x200>;
interrupts = <0 31 0x04>;
@ -325,7 +325,7 @@
status = "disabled";
};
usb@0,7d000000 {
usb@7d000000 {
compatible = "nvidia,tegra210-ehci";
reg = <0x0 0x7d000000 0x0 0x4000>;
interrupts = <0 20 0x04>;
@ -336,7 +336,7 @@
status = "disabled";
};
usb@0,7d004000 {
usb@7d004000 {
compatible = "nvidia,tegra210-ehci";
reg = <0x0 0x7d004000 0x0 0x4000>;
interrupts = < 53 >;