nand: Sync with Linux v4.1

Update the NAND code to match Linux v4.1.  The previous sync was
from Linux v3.15 in commit 4e67c57125.

CONFIG_SYS_NAND_RESET_CNT is removed, as the upstream Linux code now
has its own timeout.  Plus, CONFIG_SYS_NAND_RESET_CNT was undocumented
and not selected by any board.

Signed-off-by: Scott Wood <scottwood@freescale.com>
This commit is contained in:
Scott Wood 2015-06-26 19:03:26 -05:00
parent 86a720aafc
commit d3963721d9
13 changed files with 656 additions and 197 deletions

View File

@ -34,6 +34,7 @@ obj-y += nand_ids.o
obj-y += nand_util.o
obj-y += nand_ecc.o
obj-y += nand_base.o
obj-y += nand_timings.o
endif # not spl

View File

@ -170,4 +170,7 @@ struct pmecc_errloc_regs {
#define PMECC_MAX_TIMEOUT_US (100 * 1000)
/* Reserved bytes in oob area */
#define PMECC_OOB_RESERVED_BYTES 2
#endif

View File

@ -18,8 +18,10 @@
static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
/* We define a macro here that combines all interrupts this driver uses into
* a single constant value, for convenience. */
/*
* We define a macro here that combines all interrupts this driver uses into
* a single constant value, for convenience.
*/
#define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \
INTR_STATUS__ECC_TRANSACTION_DONE | \
INTR_STATUS__ECC_ERR | \
@ -34,8 +36,10 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
INTR_STATUS__INT_ACT | \
INTR_STATUS__LOCKED_BLK)
/* indicates whether or not the internal value for the flash bank is
* valid or not */
/*
* indicates whether or not the internal value for the flash bank is
* valid or not
*/
#define CHIP_SELECT_INVALID -1
#define SUPPORT_8BITECC 1
@ -46,11 +50,14 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
*/
#define mtd_to_denali(m) container_of(m->priv, struct denali_nand_info, nand)
/* These constants are defined by the driver to enable common driver
* configuration options. */
/*
* These constants are defined by the driver to enable common driver
* configuration options.
*/
#define SPARE_ACCESS 0x41
#define MAIN_ACCESS 0x42
#define MAIN_SPARE_ACCESS 0x43
#define PIPELINE_ACCESS 0x2000
#define DENALI_UNLOCK_START 0x10
#define DENALI_UNLOCK_END 0x11
@ -67,8 +74,10 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
#define ADDR_CYCLE 1
#define STATUS_CYCLE 2
/* this is a helper macro that allows us to
* format the bank into the proper bits for the controller */
/*
* this is a helper macro that allows us to
* format the bank into the proper bits for the controller
*/
#define BANK(x) ((x) << 24)
/* Interrupts are cleared by writing a 1 to the appropriate status bit */
@ -140,7 +149,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
* read/write data. The operation is performed by writing the address value
* of the command to the device memory followed by the data. This function
* abstracts this common operation.
*/
*/
static void index_addr(struct denali_nand_info *denali,
uint32_t address, uint32_t data)
{
@ -156,8 +165,10 @@ static void index_addr_read_data(struct denali_nand_info *denali,
*pdata = readl(denali->flash_mem + INDEX_DATA_REG);
}
/* We need to buffer some data for some of the NAND core routines.
* The operations manage buffering that data. */
/*
* We need to buffer some data for some of the NAND core routines.
* The operations manage buffering that data.
*/
static void reset_buf(struct denali_nand_info *denali)
{
denali->buf.head = 0;
@ -173,8 +184,7 @@ static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte)
static void reset_bank(struct denali_nand_info *denali)
{
uint32_t irq_status;
uint32_t irq_mask = INTR_STATUS__RST_COMP |
INTR_STATUS__TIME_OUT;
uint32_t irq_mask = INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT;
clear_interrupts(denali);
@ -188,7 +198,7 @@ static void reset_bank(struct denali_nand_info *denali)
/* Reset the flash controller */
static uint32_t denali_nand_reset(struct denali_nand_info *denali)
{
uint32_t i;
int i;
for (i = 0; i < denali->max_banks; i++)
writel(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
@ -232,7 +242,6 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
uint32_t twhr[6] = {120, 80, 80, 60, 60, 60};
uint32_t tcs[6] = {70, 35, 25, 25, 20, 15};
uint32_t tclsrising = 1;
uint32_t data_invalid_rhoh, data_invalid_rloh, data_invalid;
uint32_t dv_window = 0;
uint32_t en_lo, en_hi;
@ -256,9 +265,8 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
data_invalid_rloh = (en_lo + en_hi) * CLK_X + trloh[mode];
data_invalid =
data_invalid_rhoh <
data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh;
data_invalid = data_invalid_rhoh < data_invalid_rloh ?
data_invalid_rhoh : data_invalid_rloh;
dv_window = data_invalid - trea[mode];
@ -268,10 +276,10 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
acc_clks = DIV_ROUND_UP(trea[mode], CLK_X);
while (((acc_clks * CLK_X) - trea[mode]) < 3)
while (acc_clks * CLK_X - trea[mode] < 3)
acc_clks++;
if ((data_invalid - acc_clks * CLK_X) < 2)
if (data_invalid - acc_clks * CLK_X < 2)
debug("%s, Line %d: Warning!\n", __FILE__, __LINE__);
addr_2_data = DIV_ROUND_UP(tadl[mode], CLK_X);
@ -279,19 +287,17 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
re_2_re = DIV_ROUND_UP(trhz[mode], CLK_X);
we_2_re = DIV_ROUND_UP(twhr[mode], CLK_X);
cs_cnt = DIV_ROUND_UP((tcs[mode] - trp[mode]), CLK_X);
if (!tclsrising)
cs_cnt = DIV_ROUND_UP(tcs[mode], CLK_X);
if (cs_cnt == 0)
cs_cnt = 1;
if (tcea[mode]) {
while (((cs_cnt * CLK_X) + trea[mode]) < tcea[mode])
while (cs_cnt * CLK_X + trea[mode] < tcea[mode])
cs_cnt++;
}
/* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */
if ((readl(denali->flash_reg + MANUFACTURER_ID) == 0) &&
(readl(denali->flash_reg + DEVICE_ID) == 0x88))
if (readl(denali->flash_reg + MANUFACTURER_ID) == 0 &&
readl(denali->flash_reg + DEVICE_ID) == 0x88)
acc_clks = 6;
writel(acc_clks, denali->flash_reg + ACC_CLKS);
@ -308,6 +314,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
static uint32_t get_onfi_nand_para(struct denali_nand_info *denali)
{
int i;
/*
* we needn't to do a reset here because driver has already
* reset all the banks before
@ -324,8 +331,11 @@ static uint32_t get_onfi_nand_para(struct denali_nand_info *denali)
nand_onfi_timing_set(denali, i);
/* By now, all the ONFI devices we know support the page cache */
/* rw feature. So here we enable the pipeline_rw_ahead feature */
/*
* By now, all the ONFI devices we know support the page cache
* rw feature. So here we enable the pipeline_rw_ahead feature
*/
return 0;
}
@ -348,8 +358,10 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali)
{
uint32_t tmp;
/* Workaround to fix a controller bug which reports a wrong */
/* spare area size for some kind of Toshiba NAND device */
/*
* Workaround to fix a controller bug which reports a wrong
* spare area size for some kind of Toshiba NAND device
*/
if ((readl(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
(readl(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) {
writel(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
@ -379,7 +391,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
writel(0, denali->flash_reg + DEVICE_WIDTH);
break;
default:
debug("Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
debug("Spectra: Unknown Hynix NAND (Device ID: 0x%x).\n"
"Will use default parameter values instead.\n",
device_id);
}
@ -396,11 +408,9 @@ static void find_valid_banks(struct denali_nand_info *denali)
denali->total_used_banks = 1;
for (i = 0; i < denali->max_banks; i++) {
index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90);
index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0);
index_addr_read_data(denali,
(uint32_t)(MODE_11 | (i << 24) | 2),
&id[i]);
index_addr(denali, MODE_11 | (i << 24) | 0, 0x90);
index_addr(denali, MODE_11 | (i << 24) | 1, 0);
index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]);
if (i == 0) {
if (!(id[i] & 0x0ff))
@ -453,18 +463,19 @@ static void detect_partition_feature(struct denali_nand_info *denali)
static uint32_t denali_nand_timing_set(struct denali_nand_info *denali)
{
uint32_t id_bytes[5], addr;
uint8_t i, maf_id, device_id;
uint32_t id_bytes[8], addr;
uint8_t maf_id, device_id;
int i;
/* Use read id method to get device ID and other
* params. For some NAND chips, controller can't
* report the correct device ID by reading from
* DEVICE_ID register
* */
addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
index_addr(denali, (uint32_t)addr | 0, 0x90);
index_addr(denali, (uint32_t)addr | 1, 0);
for (i = 0; i < 5; i++)
/*
* Use read id method to get device ID and other params.
* For some NAND chips, controller can't report the correct
* device ID by reading from DEVICE_ID register
*/
addr = MODE_11 | BANK(denali->flash_bank);
index_addr(denali, addr | 0, 0x90);
index_addr(denali, addr | 1, 0);
for (i = 0; i < 8; i++)
index_addr_read_data(denali, addr | 2, &id_bytes[i]);
maf_id = id_bytes[0];
device_id = id_bytes[1];
@ -485,7 +496,8 @@ static uint32_t denali_nand_timing_set(struct denali_nand_info *denali)
detect_partition_feature(denali);
/* If the user specified to override the default timings
/*
* If the user specified to override the default timings
* with a specific ONFI mode, we apply those changes here.
*/
if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
@ -494,7 +506,8 @@ static uint32_t denali_nand_timing_set(struct denali_nand_info *denali)
return 0;
}
/* validation function to verify that the controlling software is making
/*
* validation function to verify that the controlling software is making
* a valid request
*/
static inline bool is_flash_bank_valid(int flash_bank)
@ -504,7 +517,7 @@ static inline bool is_flash_bank_valid(int flash_bank)
static void denali_irq_init(struct denali_nand_info *denali)
{
uint32_t int_mask = 0;
uint32_t int_mask;
int i;
/* Disable global interrupts */
@ -519,12 +532,14 @@ static void denali_irq_init(struct denali_nand_info *denali)
denali_irq_enable(denali, int_mask);
}
/* This helper function setups the registers for ECC and whether or not
* the spare area will be transferred. */
/*
* This helper function setups the registers for ECC and whether or not
* the spare area will be transferred.
*/
static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
bool transfer_spare)
{
int ecc_en_flag = 0, transfer_spare_flag = 0;
int ecc_en_flag, transfer_spare_flag;
/* set ECC, transfer spare bits if needed */
ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
@ -536,19 +551,19 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
writel(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
}
/* sends a pipeline command operation to the controller. See the Denali NAND
/*
* sends a pipeline command operation to the controller. See the Denali NAND
* controller's user guide for more information (section 4.2.3.6).
*/
static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
bool ecc_en, bool transfer_spare,
int access_type, int op)
bool ecc_en, bool transfer_spare,
int access_type, int op)
{
uint32_t addr, cmd, irq_status;
static uint32_t page_count = 1;
setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
/* clear interrupts */
clear_interrupts(denali);
addr = BANK(denali->flash_bank) | denali->page;
@ -576,12 +591,15 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
/* helper function that simply writes a buffer to the flash */
static int write_data_to_flash_mem(struct denali_nand_info *denali,
const uint8_t *buf, int len)
const uint8_t *buf, int len)
{
uint32_t i = 0, *buf32;
uint32_t *buf32;
int i;
/* verify that the len is a multiple of 4. see comment in
* read_data_from_flash_mem() */
/*
* verify that the len is a multiple of 4.
* see comment in read_data_from_flash_mem()
*/
BUG_ON((len % 4) != 0);
/* write the data to the flash memory */
@ -593,19 +611,17 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali,
/* helper function that simply reads a buffer from the flash */
static int read_data_from_flash_mem(struct denali_nand_info *denali,
uint8_t *buf, int len)
uint8_t *buf, int len)
{
uint32_t i, *buf32;
uint32_t *buf32;
int i;
/*
* we assume that len will be a multiple of 4, if not
* it would be nice to know about it ASAP rather than
* have random failures...
* This assumption is based on the fact that this
* function is designed to be used to read flash pages,
* which are typically multiples of 4...
* we assume that len will be a multiple of 4, if not it would be nice
* to know about it ASAP rather than have random failures...
* This assumption is based on the fact that this function is designed
* to be used to read flash pages, which are typically multiples of 4.
*/
BUG_ON((len % 4) != 0);
/* transfer the data from the flash */
@ -667,8 +683,8 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
uint32_t irq_mask = INTR_STATUS__LOAD_COMP,
irq_status = 0, addr = 0x0, cmd = 0x0;
uint32_t irq_mask = INTR_STATUS__LOAD_COMP;
uint32_t irq_status, addr, cmd;
denali->page = page;
@ -676,15 +692,18 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
DENALI_READ) == 0) {
read_data_from_flash_mem(denali, buf, mtd->oobsize);
/* wait for command to be accepted
* can always use status0 bit as the mask is identical for each
* bank. */
/*
* wait for command to be accepted
* can always use status0 bit as the
* mask is identical for each bank.
*/
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0)
printf("page on OOB timeout %d\n", denali->page);
/* We set the device back to MAIN_ACCESS here as I observed
/*
* We set the device back to MAIN_ACCESS here as I observed
* instability with the controller if you do a block erase
* and the last transaction was a SPARE_ACCESS. Block erase
* is reliable (according to the MTD test infrastructure)
@ -696,12 +715,14 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
}
}
/* this function examines buffers to see if they contain data that
/*
* this function examines buffers to see if they contain data that
* indicate that the buffer is part of an erased region of flash.
*/
static bool is_erased(uint8_t *buf, int len)
{
int i = 0;
int i;
for (i = 0; i < len; i++)
if (buf[i] != 0xFF)
return false;
@ -711,12 +732,7 @@ static bool is_erased(uint8_t *buf, int len)
/* programs the controller to either enable/disable DMA transfers */
static void denali_enable_dma(struct denali_nand_info *denali, bool en)
{
uint32_t reg_val = 0x0;
if (en)
reg_val = DMA_ENABLE__FLAG;
writel(reg_val, denali->flash_reg + DMA_ENABLE);
writel(en ? DMA_ENABLE__FLAG : 0, denali->flash_reg + DMA_ENABLE);
readl(denali->flash_reg + DMA_ENABLE);
}
@ -753,12 +769,12 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
index_addr(denali, mode | denali->page, 0x2000 | op | page_count);
/* 2. set memory high address bits 23:8 */
index_addr(denali, mode | ((uint32_t)(addr >> 16) << 8), 0x2200);
index_addr(denali, mode | ((addr >> 16) << 8), 0x2200);
/* 3. set memory low address bits 23:8 */
index_addr(denali, mode | ((uint32_t)addr << 8), 0x2300);
index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300);
/* 4. interrupt when complete, burst len = 64 bytes*/
/* 4. interrupt when complete, burst len = 64 bytes */
index_addr(denali, mode | 0x14000, 0x2400);
#endif
}
@ -1018,17 +1034,18 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
int status = denali->status;
denali->status = 0;
return status;
}
static void denali_erase(struct mtd_info *mtd, int page)
static int denali_erase(struct mtd_info *mtd, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
uint32_t cmd, irq_status;
/* clear interrupts */
clear_interrupts(denali);
/* setup page read request for access type */
@ -1041,9 +1058,9 @@ static void denali_erase(struct mtd_info *mtd, int page)
if (irq_status & INTR_STATUS__ERASE_FAIL ||
irq_status & INTR_STATUS__LOCKED_BLK)
denali->status = NAND_STATUS_FAIL;
else
denali->status = 0;
return NAND_STATUS_FAIL;
return 0;
}
static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
@ -1062,10 +1079,11 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
case NAND_CMD_READID:
case NAND_CMD_PARAM:
reset_buf(denali);
/* sometimes ManufactureId read from register is not right
/*
* sometimes ManufactureId read from register is not right
* e.g. some of Micron MT29F32G08QAA MLC NAND chips
* So here we send READID cmd to NAND insteand
* */
*/
addr = MODE_11 | BANK(denali->flash_bank);
index_addr(denali, addr | 0, cmd);
index_addr(denali, addr | 1, col & 0xFF);
@ -1187,6 +1205,9 @@ static int denali_init(struct denali_nand_info *denali)
denali->nand.ecc.mode = NAND_ECC_HW;
denali->nand.ecc.size = CONFIG_NAND_DENALI_ECC_SIZE;
/* no subpage writes on denali */
denali->nand.options |= NAND_NO_SUBPAGE_WRITE;
/*
* Tell driver the ecc strength. This register may be already set
* correctly. So we read this value out.

View File

@ -5,6 +5,9 @@
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __DENALI_H__
#define __DENALI_H__
#include <linux/mtd/nand.h>
#define DEVICE_RESET 0x0
@ -381,9 +384,6 @@
#define CUSTOM_CONF_PARAMS 0
#ifndef _LLD_NAND_
#define _LLD_NAND_
#define INDEX_CTRL_REG 0x0
#define INDEX_DATA_REG 0x10
@ -463,4 +463,4 @@ struct denali_nand_info {
uint32_t max_banks;
};
#endif /*_LLD_NAND_*/
#endif /* __DENALI_H__ */

View File

@ -717,7 +717,7 @@ static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand,
return read_page(mtd, nand, buf, page, 1);
}
static void docg4_erase_block(struct mtd_info *mtd, int page)
static int docg4_erase_block(struct mtd_info *mtd, int page)
{
struct nand_chip *nand = mtd->priv;
struct docg4_priv *doc = nand->priv;
@ -760,6 +760,8 @@ static void docg4_erase_block(struct mtd_info *mtd, int page)
write_nop(docptr);
poll_status(docptr);
write_nop(docptr);
return nand->waitfunc(mtd, nand);
}
static int read_factory_bbt(struct mtd_info *mtd)
@ -972,7 +974,7 @@ int docg4_nand_init(struct mtd_info *mtd, struct nand_chip *nand, int devnum)
nand->read_buf = docg4_read_buf;
nand->write_buf = docg4_write_buf16;
nand->scan_bbt = nand_default_bbt;
nand->erase_cmd = docg4_erase_block;
nand->erase = docg4_erase_block;
nand->ecc.read_page = docg4_read_page;
nand->ecc.write_page = docg4_write_page;
nand->ecc.read_page_raw = docg4_read_page_raw;

View File

@ -621,6 +621,19 @@ static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
static struct fsl_elbc_ctrl *elbc_ctrl;
/* ECC will be calculated automatically, and errors will be detected in
* waitfunc.
*/
static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offset, uint32_t data_len,
const uint8_t *buf, int oob_required)
{
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
return 0;
}
static void fsl_elbc_ctrl_init(void)
{
elbc_ctrl = kzalloc(sizeof(*elbc_ctrl), GFP_KERNEL);
@ -710,6 +723,7 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
nand->ecc.read_page = fsl_elbc_read_page;
nand->ecc.write_page = fsl_elbc_write_page;
nand->ecc.write_subpage = fsl_elbc_write_subpage;
priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);

View File

@ -47,7 +47,7 @@ struct fsl_ifc_ctrl {
/* device info */
struct fsl_ifc regs;
uint8_t __iomem *addr; /* Address of assigned IFC buffer */
void __iomem *addr; /* Address of assigned IFC buffer */
unsigned int cs_nand; /* On which chipsel NAND is connected */
unsigned int page; /* Last page written to / read from */
unsigned int read_bytes; /* Number of bytes read during command */
@ -577,8 +577,15 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
fsl_ifc_run_command(mtd);
/* Chip sometimes reporting write protect even when it's not */
out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
/*
* The chip always seems to report that it is
* write-protected, even when it is not.
*/
if (chip->options & NAND_BUSWIDTH_16)
ifc_out16(ctrl->addr,
ifc_in16(ctrl->addr) | NAND_STATUS_WP);
else
out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
return;
case NAND_CMD_RESET:
@ -618,7 +625,7 @@ static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
len = bufsize - ctrl->index;
}
memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
memcpy_toio(ctrl->addr + ctrl->index, buf, len);
ctrl->index += len;
}
@ -631,11 +638,16 @@ static u8 fsl_ifc_read_byte(struct mtd_info *mtd)
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
unsigned int offset;
/* If there are still bytes in the IFC buffer, then use the
* next byte. */
if (ctrl->index < ctrl->read_bytes)
return in_8(&ctrl->addr[ctrl->index++]);
/*
* If there are still bytes in the IFC buffer, then use the
* next byte.
*/
if (ctrl->index < ctrl->read_bytes) {
offset = ctrl->index++;
return in_8(ctrl->addr + offset);
}
printf("%s beyond end of buffer\n", __func__);
return ERR_BYTE;
@ -657,8 +669,7 @@ static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd)
* next byte.
*/
if (ctrl->index < ctrl->read_bytes) {
data = ifc_in16((uint16_t *)&ctrl->
addr[ctrl->index]);
data = ifc_in16(ctrl->addr + ctrl->index);
ctrl->index += 2;
return (uint8_t)data;
}
@ -681,7 +692,7 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
return;
avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index);
memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail);
memcpy_fromio(buf, ctrl->addr + ctrl->index, avail);
ctrl->index += avail;
if (len > avail)

View File

@ -45,17 +45,6 @@
#include <asm/io.h>
#include <asm/errno.h>
/*
* CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting
* a flash. NAND flash is initialized prior to interrupts so standard timers
* can't be used. CONFIG_SYS_NAND_RESET_CNT should be set to a value
* which is greater than (max NAND reset time / NAND status read time).
* A conservative default of 200000 (500 us / 25 ns) is used as a default.
*/
#ifndef CONFIG_SYS_NAND_RESET_CNT
#define CONFIG_SYS_NAND_RESET_CNT 200000
#endif
static bool is_module_text_address(unsigned long addr) {return 0;}
/* Define default oob placement schemes for large and small page devices */
@ -161,7 +150,6 @@ uint8_t nand_read_byte(struct mtd_info *mtd)
}
/**
* nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* @mtd: MTD device structure
*
@ -427,7 +415,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
uint8_t buf[2] = { 0, 0 };
int ret = 0, res, i = 0;
ops.datbuf = NULL;
memset(&ops, 0, sizeof(ops));
ops.oobbuf = buf;
ops.ooboffs = chip->badblockpos;
if (chip->options & NAND_BUSWIDTH_16) {
@ -525,11 +513,11 @@ static int nand_check_wp(struct mtd_info *mtd)
}
/**
* nand_block_checkbad - [GENERIC] Check if a block is marked bad
* nand_block_isreserved - [GENERIC] Check if a block is marked reserved.
* @mtd: MTD device structure
* @ofs: offset from device start
*
* Check if the block is mark as reserved.
* Check if the block is marked as reserved.
*/
static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
{
@ -586,6 +574,27 @@ void nand_wait_ready(struct mtd_info *mtd)
}
EXPORT_SYMBOL_GPL(nand_wait_ready);
/**
* nand_wait_status_ready - [GENERIC] Wait for the ready status after commands.
* @mtd: MTD device structure
* @timeo: Timeout in ms
*
* Wait for status ready (i.e. command done) or timeout.
*/
static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
{
register struct nand_chip *chip = mtd->priv;
u32 time_start;
timeo = (CONFIG_SYS_HZ * timeo) / 1000;
time_start = get_timer(0);
while (get_timer(time_start) < timeo) {
if ((chip->read_byte(mtd) & NAND_STATUS_READY))
break;
WATCHDOG_RESET();
}
};
/**
* nand_command - [DEFAULT] Send command to NAND device
* @mtd: MTD device structure
@ -601,7 +610,6 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
{
register struct nand_chip *chip = mtd->priv;
int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT;
/* Write out the command to the device */
if (command == NAND_CMD_SEQIN) {
@ -665,8 +673,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
NAND_CTRL_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd,
NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
while (!(chip->read_byte(mtd) & NAND_STATUS_READY) &&
(rst_sts_cnt--));
/* EZ-NAND can take upto 250ms as per ONFi v4.0 */
nand_wait_status_ready(mtd, 250);
return;
/* This applies to read commands */
@ -704,7 +712,6 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
{
register struct nand_chip *chip = mtd->priv;
uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT;
/* Emulate NAND_CMD_READOOB */
if (command == NAND_CMD_READOOB) {
@ -742,7 +749,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
/*
* Program and erase have their own busy handlers status, sequential
* in, and deplete1 need no delay.
* in and status need no delay.
*/
switch (command) {
@ -763,8 +770,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd, NAND_CMD_NONE,
NAND_NCE | NAND_CTRL_CHANGE);
while (!(chip->read_byte(mtd) & NAND_STATUS_READY) &&
(rst_sts_cnt--));
/* EZ-NAND can take upto 250ms as per ONFi v4.0 */
nand_wait_status_ready(mtd, 250);
return;
case NAND_CMD_RNDOUT:
@ -1062,8 +1069,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
* ecc.pos. Let's make sure that there are no gaps in ECC positions.
*/
for (i = 0; i < eccfrag_len - 1; i++) {
if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
eccpos[i + start_step * chip->ecc.bytes + 1]) {
if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
gaps = 1;
break;
}
@ -1359,6 +1365,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
mtd->oobavail : mtd->oobsize;
uint8_t *bufpoi, *oob, *buf;
int use_bufpoi;
unsigned int max_bitflips = 0;
int retry_mode = 0;
bool ecc_fail = false;
@ -1382,9 +1389,18 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
if (!aligned)
use_bufpoi = 1;
else
use_bufpoi = 0;
/* Is the current page in the buffer? */
if (realpage != chip->pagebuf || oob) {
bufpoi = aligned ? buf : chip->buffers->databuf;
bufpoi = use_bufpoi ? chip->buffers->databuf : buf;
if (use_bufpoi && aligned)
pr_debug("%s: using read bounce buffer for buf@%p\n",
__func__, buf);
read_retry:
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
@ -1406,7 +1422,7 @@ read_retry:
ret = chip->ecc.read_page(mtd, chip, bufpoi,
oob_required, page);
if (ret < 0) {
if (!aligned)
if (use_bufpoi)
/* Invalidate page cache */
chip->pagebuf = -1;
break;
@ -1415,7 +1431,7 @@ read_retry:
max_bitflips = max_t(unsigned int, max_bitflips, ret);
/* Transfer not aligned data */
if (!aligned) {
if (use_bufpoi) {
if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
!(mtd->ecc_stats.failed - ecc_failures) &&
(ops->mode != MTD_OPS_RAW)) {
@ -1529,9 +1545,9 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
int ret;
nand_get_device(mtd, FL_READING);
memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = buf;
ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_read_ops(mtd, from, &ops);
*retlen = ops.retlen;
@ -1563,11 +1579,10 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page)
{
uint8_t *buf = chip->oob_poi;
int length = mtd->oobsize;
int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
int eccsize = chip->ecc.size;
uint8_t *bufpoi = buf;
uint8_t *bufpoi = chip->oob_poi;
int i, toread, sndrnd = 0, pos;
chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page);
@ -1940,7 +1955,7 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
/**
* nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write
* nand_write_subpage_hwecc - [REPLACEABLE] hardware ECC based subpage write
* @mtd: mtd info structure
* @chip: nand chip info structure
* @offset: column address of subpage within the page
@ -2223,8 +2238,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
/* Invalidate the page cache, when we write to the cached page */
if (to <= (chip->pagebuf << chip->page_shift) &&
(chip->pagebuf << chip->page_shift) < (to + ops->len))
if (to <= ((loff_t)chip->pagebuf << chip->page_shift) &&
((loff_t)chip->pagebuf << chip->page_shift) < (to + ops->len))
chip->pagebuf = -1;
/* Don't allow multipage oob writes with offset */
@ -2237,12 +2252,22 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
int bytes = mtd->writesize;
int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
int use_bufpoi;
int part_pagewr = (column || writelen < (mtd->writesize - 1));
if (part_pagewr)
use_bufpoi = 1;
else
use_bufpoi = 0;
WATCHDOG_RESET();
/* Partial page write? */
if (unlikely(column || writelen < (mtd->writesize - 1))) {
/* Partial page write?, or need to use bounce buffer */
if (use_bufpoi) {
pr_debug("%s: using write bounce buffer for buf@%p\n",
__func__, buf);
cached = 0;
bytes = min_t(int, bytes - column, (int) writelen);
if (part_pagewr)
bytes = min_t(int, bytes - column, writelen);
chip->pagebuf = -1;
memset(chip->buffers->databuf, 0xff, mtd->writesize);
memcpy(&chip->buffers->databuf[column], buf, bytes);
@ -2313,9 +2338,9 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
/* Grab the device */
panic_nand_get_device(chip, mtd, FL_WRITING);
memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
@ -2341,9 +2366,9 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
int ret;
nand_get_device(mtd, FL_WRITING);
memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
*retlen = ops.retlen;
@ -2480,18 +2505,20 @@ out:
}
/**
* single_erase_cmd - [GENERIC] NAND standard block erase command function
* single_erase - [GENERIC] NAND standard block erase command function
* @mtd: MTD device structure
* @page: the page address of the block which will be erased
*
* Standard erase command for NAND chips.
* Standard erase command for NAND chips. Returns NAND status.
*/
static void single_erase_cmd(struct mtd_info *mtd, int page)
static int single_erase(struct mtd_info *mtd, int page)
{
struct nand_chip *chip = mtd->priv;
/* Send commands to erase a block */
chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
return chip->waitfunc(mtd, chip);
}
/**
@ -2574,9 +2601,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
(page + pages_per_block))
chip->pagebuf = -1;
chip->erase_cmd(mtd, page & chip->pagemask);
status = chip->waitfunc(mtd, chip);
status = chip->erase(mtd, page & chip->pagemask);
/*
* See if operation failed and additional status checks are
@ -2729,7 +2754,6 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
return 0;
}
/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip, int busw)
{
@ -3388,6 +3412,8 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
chip->options |= type->options;
chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
chip->ecc_step_ds = NAND_ECC_STEP(type);
chip->onfi_timing_mode_default =
type->onfi_timing_mode_default;
*busw = type->options & NAND_BUSWIDTH_16;
@ -3460,7 +3486,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->onfi_version = 0;
if (!type->name || !type->pagesize) {
/* Check is chip is ONFI compliant */
/* Check if the chip is ONFI compliant */
if (nand_flash_detect_onfi(mtd, chip, &busw))
goto ident_done;
@ -3538,7 +3564,7 @@ ident_done:
}
chip->badblockbits = 8;
chip->erase_cmd = single_erase_cmd;
chip->erase = single_erase;
/* Do not replace user supplied command function! */
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
@ -3569,9 +3595,9 @@ ident_done:
type->name);
#endif
pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
mtd->writesize, mtd->oobsize);
mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
return type;
}
@ -3638,6 +3664,39 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
}
EXPORT_SYMBOL(nand_scan_ident);
/*
* Check if the chip configuration meet the datasheet requirements.
* If our configuration corrects A bits per B bytes and the minimum
* required correction level is X bits per Y bytes, then we must ensure
* both of the following are true:
*
* (1) A / B >= X / Y
* (2) A >= X
*
* Requirement (1) ensures we can correct for the required bitflip density.
* Requirement (2) ensures we can correct even when all bitflips are clumped
* in the same sector.
*/
static bool nand_ecc_strength_good(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
struct nand_ecc_ctrl *ecc = &chip->ecc;
int corr, ds_corr;
if (ecc->size == 0 || chip->ecc_step_ds == 0)
/* Not enough information */
return true;
/*
* We get the number of corrected bits per page to compare
* the correction density.
*/
corr = (mtd->writesize * ecc->strength) / ecc->size;
ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
}
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
@ -3705,8 +3764,7 @@ int nand_scan_tail(struct mtd_info *mtd)
case NAND_ECC_HW_OOB_FIRST:
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
pr_warn("No ECC functions supplied; "
"hardware ECC not possible\n");
pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
}
if (!ecc->read_page)
@ -3737,8 +3795,7 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->read_page == nand_read_page_hwecc ||
!ecc->write_page ||
ecc->write_page == nand_write_page_hwecc)) {
pr_warn("No ECC functions supplied; "
"hardware ECC not possible\n");
pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
}
/* Use standard syndrome read/write page function? */
@ -3762,9 +3819,8 @@ int nand_scan_tail(struct mtd_info *mtd)
}
break;
}
pr_warn("%d byte HW ECC not possible on "
"%d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
ecc->mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
@ -3798,27 +3854,28 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->read_oob = nand_read_oob_std;
ecc->write_oob = nand_write_oob_std;
/*
* Board driver should supply ecc.size and ecc.bytes values to
* select how many bits are correctable; see nand_bch_init()
* for details. Otherwise, default to 4 bits for large page
* devices.
* Board driver should supply ecc.size and ecc.strength values
* to select how many bits are correctable. Otherwise, default
* to 4 bits for large page devices.
*/
if (!ecc->size && (mtd->oobsize >= 64)) {
ecc->size = 512;
ecc->bytes = 7;
ecc->strength = 4;
}
/* See nand_bch_init() for details. */
ecc->bytes = DIV_ROUND_UP(
ecc->strength * fls(8 * ecc->size), 8);
ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
&ecc->layout);
if (!ecc->priv) {
pr_warn("BCH ECC initialization failed!\n");
BUG();
}
ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size);
break;
case NAND_ECC_NONE:
pr_warn("NAND_ECC_NONE selected by board driver. "
"This is not recommended!\n");
pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
ecc->write_page = nand_write_page_raw;
ecc->read_oob = nand_read_oob_std;
@ -3851,6 +3908,11 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->layout->oobavail += ecc->layout->oobfree[i].length;
mtd->oobavail = ecc->layout->oobavail;
/* ECC sanity check: warn if it's too weak */
if (!nand_ecc_strength_good(mtd))
pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
mtd->name);
/*
* Set the number of read / write steps for one page depending on ECC
* mode.
@ -3884,8 +3946,16 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->pagebuf = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
chip->options |= NAND_SUBPAGE_READ;
switch (ecc->mode) {
case NAND_ECC_SOFT:
case NAND_ECC_SOFT_BCH:
if (chip->page_shift > 9)
chip->options |= NAND_SUBPAGE_READ;
break;
default:
break;
}
/* Fill in remaining MTD driver data */
mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
@ -3915,7 +3985,7 @@ int nand_scan_tail(struct mtd_info *mtd)
* properly set.
*/
if (!mtd->bitflip_threshold)
mtd->bitflip_threshold = mtd->ecc_strength;
mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
return 0;
}

View File

@ -199,12 +199,12 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
res = mtd_read(mtd, from, len, &retlen, buf);
if (res < 0) {
if (mtd_is_eccerr(res)) {
pr_info("nand_bbt: ECC error in BBT at "
"0x%012llx\n", from & ~mtd->writesize);
pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n",
from & ~mtd->writesize);
return res;
} else if (mtd_is_bitflip(res)) {
pr_info("nand_bbt: corrected error in BBT at "
"0x%012llx\n", from & ~mtd->writesize);
pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n",
from & ~mtd->writesize);
ret = res;
} else {
pr_info("nand_bbt: error reading BBT\n");
@ -578,8 +578,8 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
if (td->pages[i] == -1)
pr_warn("Bad block table not found for chip %d\n", i);
else
pr_info("Bad block table found at page %d, version "
"0x%02X\n", td->pages[i], td->version[i]);
pr_info("Bad block table found at page %d, version 0x%02X\n",
td->pages[i], td->version[i]);
}
return 0;
}
@ -723,12 +723,10 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
res = mtd_read(mtd, to, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
pr_info("nand_bbt: error reading block "
"for writing the bad block table\n");
pr_info("nand_bbt: error reading block for writing the bad block table\n");
return res;
}
pr_warn("nand_bbt: ECC error while reading "
"block for writing bad block table\n");
pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");
}
/* Read oob data */
ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
@ -1280,6 +1278,7 @@ static int nand_create_badblock_pattern(struct nand_chip *this)
int nand_default_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
int ret;
/* Is a flash based bad block table requested? */
if (this->bbt_options & NAND_BBT_USE_FLASH) {
@ -1298,8 +1297,11 @@ int nand_default_bbt(struct mtd_info *mtd)
this->bbt_md = NULL;
}
if (!this->badblock_pattern)
nand_create_badblock_pattern(this);
if (!this->badblock_pattern) {
ret = nand_create_badblock_pattern(this);
if (ret)
return ret;
}
return nand_scan_bbt(mtd, this->badblock_pattern);
}
@ -1332,9 +1334,8 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
block = (int)(offs >> this->bbt_erase_shift);
res = bbt_get_entry(this, block);
pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
"(block %d) 0x%02x\n",
(unsigned int)offs, block, res);
pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
(unsigned int)offs, block, res);
switch (res) {
case BBT_BLOCK_GOOD:

View File

@ -56,6 +56,10 @@ struct nand_flash_dev nand_flash_ids[] = {
{"SDTNRGAMA 64G 3.3V 8-bit",
{ .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
{"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
4 },
LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
@ -184,6 +188,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_EON, "Eon"},
{NAND_MFR_SANDISK, "SanDisk"},
{NAND_MFR_INTEL, "Intel"},
{NAND_MFR_ATO, "ATO"},
{0x0, "Unknown"}
};

View File

@ -0,0 +1,252 @@
/*
* Copyright (C) 2014 Free Electrons
*
* Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <common.h>
#include <linux/kernel.h>
#include <linux/mtd/nand.h>
static const struct nand_sdr_timings onfi_sdr_timings[] = {
/* Mode 0 */
{
.tADL_min = 200000,
.tALH_min = 20000,
.tALS_min = 50000,
.tAR_min = 25000,
.tCEA_max = 100000,
.tCEH_min = 20000,
.tCH_min = 20000,
.tCHZ_max = 100000,
.tCLH_min = 20000,
.tCLR_min = 20000,
.tCLS_min = 50000,
.tCOH_min = 0,
.tCS_min = 70000,
.tDH_min = 20000,
.tDS_min = 40000,
.tFEAT_max = 1000000,
.tIR_min = 10000,
.tITC_max = 1000000,
.tRC_min = 100000,
.tREA_max = 40000,
.tREH_min = 30000,
.tRHOH_min = 0,
.tRHW_min = 200000,
.tRHZ_max = 200000,
.tRLOH_min = 0,
.tRP_min = 50000,
.tRST_max = 250000000000ULL,
.tWB_max = 200000,
.tRR_min = 40000,
.tWC_min = 100000,
.tWH_min = 30000,
.tWHR_min = 120000,
.tWP_min = 50000,
.tWW_min = 100000,
},
/* Mode 1 */
{
.tADL_min = 100000,
.tALH_min = 10000,
.tALS_min = 25000,
.tAR_min = 10000,
.tCEA_max = 45000,
.tCEH_min = 20000,
.tCH_min = 10000,
.tCHZ_max = 50000,
.tCLH_min = 10000,
.tCLR_min = 10000,
.tCLS_min = 25000,
.tCOH_min = 15000,
.tCS_min = 35000,
.tDH_min = 10000,
.tDS_min = 20000,
.tFEAT_max = 1000000,
.tIR_min = 0,
.tITC_max = 1000000,
.tRC_min = 50000,
.tREA_max = 30000,
.tREH_min = 15000,
.tRHOH_min = 15000,
.tRHW_min = 100000,
.tRHZ_max = 100000,
.tRLOH_min = 0,
.tRP_min = 25000,
.tRR_min = 20000,
.tRST_max = 500000000,
.tWB_max = 100000,
.tWC_min = 45000,
.tWH_min = 15000,
.tWHR_min = 80000,
.tWP_min = 25000,
.tWW_min = 100000,
},
/* Mode 2 */
{
.tADL_min = 100000,
.tALH_min = 10000,
.tALS_min = 15000,
.tAR_min = 10000,
.tCEA_max = 30000,
.tCEH_min = 20000,
.tCH_min = 10000,
.tCHZ_max = 50000,
.tCLH_min = 10000,
.tCLR_min = 10000,
.tCLS_min = 15000,
.tCOH_min = 15000,
.tCS_min = 25000,
.tDH_min = 5000,
.tDS_min = 15000,
.tFEAT_max = 1000000,
.tIR_min = 0,
.tITC_max = 1000000,
.tRC_min = 35000,
.tREA_max = 25000,
.tREH_min = 15000,
.tRHOH_min = 15000,
.tRHW_min = 100000,
.tRHZ_max = 100000,
.tRLOH_min = 0,
.tRR_min = 20000,
.tRST_max = 500000000,
.tWB_max = 100000,
.tRP_min = 17000,
.tWC_min = 35000,
.tWH_min = 15000,
.tWHR_min = 80000,
.tWP_min = 17000,
.tWW_min = 100000,
},
/* Mode 3 */
{
.tADL_min = 100000,
.tALH_min = 5000,
.tALS_min = 10000,
.tAR_min = 10000,
.tCEA_max = 25000,
.tCEH_min = 20000,
.tCH_min = 5000,
.tCHZ_max = 50000,
.tCLH_min = 5000,
.tCLR_min = 10000,
.tCLS_min = 10000,
.tCOH_min = 15000,
.tCS_min = 25000,
.tDH_min = 5000,
.tDS_min = 10000,
.tFEAT_max = 1000000,
.tIR_min = 0,
.tITC_max = 1000000,
.tRC_min = 30000,
.tREA_max = 20000,
.tREH_min = 10000,
.tRHOH_min = 15000,
.tRHW_min = 100000,
.tRHZ_max = 100000,
.tRLOH_min = 0,
.tRP_min = 15000,
.tRR_min = 20000,
.tRST_max = 500000000,
.tWB_max = 100000,
.tWC_min = 30000,
.tWH_min = 10000,
.tWHR_min = 80000,
.tWP_min = 15000,
.tWW_min = 100000,
},
/* Mode 4 */
{
.tADL_min = 70000,
.tALH_min = 5000,
.tALS_min = 10000,
.tAR_min = 10000,
.tCEA_max = 25000,
.tCEH_min = 20000,
.tCH_min = 5000,
.tCHZ_max = 30000,
.tCLH_min = 5000,
.tCLR_min = 10000,
.tCLS_min = 10000,
.tCOH_min = 15000,
.tCS_min = 20000,
.tDH_min = 5000,
.tDS_min = 10000,
.tFEAT_max = 1000000,
.tIR_min = 0,
.tITC_max = 1000000,
.tRC_min = 25000,
.tREA_max = 20000,
.tREH_min = 10000,
.tRHOH_min = 15000,
.tRHW_min = 100000,
.tRHZ_max = 100000,
.tRLOH_min = 5000,
.tRP_min = 12000,
.tRR_min = 20000,
.tRST_max = 500000000,
.tWB_max = 100000,
.tWC_min = 25000,
.tWH_min = 10000,
.tWHR_min = 80000,
.tWP_min = 12000,
.tWW_min = 100000,
},
/* Mode 5 */
{
.tADL_min = 70000,
.tALH_min = 5000,
.tALS_min = 10000,
.tAR_min = 10000,
.tCEA_max = 25000,
.tCEH_min = 20000,
.tCH_min = 5000,
.tCHZ_max = 30000,
.tCLH_min = 5000,
.tCLR_min = 10000,
.tCLS_min = 10000,
.tCOH_min = 15000,
.tCS_min = 15000,
.tDH_min = 5000,
.tDS_min = 7000,
.tFEAT_max = 1000000,
.tIR_min = 0,
.tITC_max = 1000000,
.tRC_min = 20000,
.tREA_max = 16000,
.tREH_min = 7000,
.tRHOH_min = 15000,
.tRHW_min = 100000,
.tRHZ_max = 100000,
.tRLOH_min = 5000,
.tRP_min = 10000,
.tRR_min = 20000,
.tRST_max = 500000000,
.tWB_max = 100000,
.tWC_min = 20000,
.tWH_min = 7000,
.tWHR_min = 80000,
.tWP_min = 10000,
.tWW_min = 100000,
},
};
/**
* onfi_async_timing_mode_to_sdr_timings - [NAND Interface] Retrieve NAND
* timings according to the given ONFI timing mode
* @mode: ONFI timing mode
*/
const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode)
{
if (mode < 0 || mode >= ARRAY_SIZE(onfi_sdr_timings))
return ERR_PTR(-EINVAL);
return &onfi_sdr_timings[mode];
}
EXPORT_SYMBOL(onfi_async_timing_mode_to_sdr_timings);

View File

@ -19,10 +19,12 @@
#define ifc_in32(a) in_le32(a)
#define ifc_out32(a, v) out_le32(a, v)
#define ifc_in16(a) in_le16(a)
#define ifc_out16(a, v) out_le16(a, v)
#elif defined(CONFIG_SYS_FSL_IFC_BE)
#define ifc_in32(a) in_be32(a)
#define ifc_out32(a, v) out_be32(a, v)
#define ifc_in16(a) in_be16(a)
#define ifc_out16(a, v) out_be16(a, v)
#else
#error Neither CONFIG_SYS_FSL_IFC_LE nor CONFIG_SYS_FSL_IFC_BE is defined
#endif

View File

@ -472,8 +472,21 @@ struct nand_hw_control {
* be provided if an hardware ECC is available
* @calculate: function for ECC calculation or readback from ECC hardware
* @correct: function for ECC correction, matching to ECC generator (sw/hw)
* @read_page_raw: function to read a raw page without ECC
* @write_page_raw: function to write a raw page without ECC
* @read_page_raw: function to read a raw page without ECC. This function
* should hide the specific layout used by the ECC
* controller and always return contiguous in-band and
* out-of-band data even if they're not stored
* contiguously on the NAND chip (e.g.
* NAND_ECC_HW_SYNDROME interleaves in-band and
* out-of-band data).
* @write_page_raw: function to write a raw page without ECC. This function
* should hide the specific layout used by the ECC
* controller and consider the passed data as contiguous
* in-band and out-of-band data. ECC controller is
* responsible for doing the appropriate transformations
* to adapt to its specific layout (e.g.
* NAND_ECC_HW_SYNDROME interleaves in-band and
* out-of-band data).
* @read_page: function to read a page according to the ECC generator
* requirements; returns maximum number of bitflips corrected in
* any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
@ -575,8 +588,7 @@ struct nand_buffers {
* @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
* @erase_cmd: [INTERN] erase command write function, selectable due
* to AND support.
* @erase: [REPLACEABLE] erase function
* @scan_bbt: [REPLACEABLE] function to scan bad block table
* @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
* data from array to read regs (tR).
@ -606,6 +618,11 @@ struct nand_buffers {
* @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds,
* also from the datasheet. It is the recommended ECC step
* size, if known; if unknown, set to zero.
* @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
* either deduced from the datasheet if the NAND
* chip is not ONFI compliant or set to 0 if it is
* (an ONFI chip is always configured in mode 0
* after a NAND reset)
* @numchips: [INTERN] number of physical chips
* @chipsize: [INTERN] the size of one chip for multichip arrays
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
@ -660,7 +677,7 @@ struct nand_chip {
void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
int page_addr);
int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
void (*erase_cmd)(struct mtd_info *mtd, int page);
int (*erase)(struct mtd_info *mtd, int page);
int (*scan_bbt)(struct mtd_info *mtd);
int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
int status, int page);
@ -690,6 +707,7 @@ struct nand_chip {
uint8_t bits_per_cell;
uint16_t ecc_strength_ds;
uint16_t ecc_step_ds;
int onfi_timing_mode_default;
int badblockpos;
int badblockbits;
@ -737,6 +755,7 @@ struct nand_chip {
#define NAND_MFR_EON 0x92
#define NAND_MFR_SANDISK 0x45
#define NAND_MFR_INTEL 0x89
#define NAND_MFR_ATO 0x9b
/* The maximum expected count of bytes in the NAND ID sequence */
#define NAND_MAX_ID_LEN 8
@ -786,12 +805,17 @@ struct nand_chip {
* @options: stores various chip bit options
* @id_len: The valid length of the @id.
* @oobsize: OOB size
* @ecc: ECC correctability and step information from the datasheet.
* @ecc.strength_ds: The ECC correctability from the datasheet, same as the
* @ecc_strength_ds in nand_chip{}.
* @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the
* @ecc_step_ds in nand_chip{}, also from the datasheet.
* For example, the "4bit ECC for each 512Byte" can be set with
* NAND_ECC_INFO(4, 512).
* @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND
* reset. Should be deduced from timings described
* in the datasheet.
*
*/
struct nand_flash_dev {
char *name;
@ -812,6 +836,7 @@ struct nand_flash_dev {
uint16_t strength_ds;
uint16_t step_ds;
} ecc;
int onfi_timing_mode_default;
};
/**
@ -983,4 +1008,56 @@ void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len);
void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
uint8_t nand_read_byte(struct mtd_info *mtd);
/*
* struct nand_sdr_timings - SDR NAND chip timings
*
* This struct defines the timing requirements of a SDR NAND chip.
* These informations can be found in every NAND datasheets and the timings
* meaning are described in the ONFI specifications:
* www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing
* Parameters)
*
* All these timings are expressed in picoseconds.
*/
struct nand_sdr_timings {
u32 tALH_min;
u32 tADL_min;
u32 tALS_min;
u32 tAR_min;
u32 tCEA_max;
u32 tCEH_min;
u32 tCH_min;
u32 tCHZ_max;
u32 tCLH_min;
u32 tCLR_min;
u32 tCLS_min;
u32 tCOH_min;
u32 tCS_min;
u32 tDH_min;
u32 tDS_min;
u32 tFEAT_max;
u32 tIR_min;
u32 tITC_max;
u32 tRC_min;
u32 tREA_max;
u32 tREH_min;
u32 tRHOH_min;
u32 tRHW_min;
u32 tRHZ_max;
u32 tRLOH_min;
u32 tRP_min;
u32 tRR_min;
u64 tRST_max;
u32 tWB_max;
u32 tWC_min;
u32 tWH_min;
u32 tWHR_min;
u32 tWP_min;
u32 tWW_min;
};
/* get timing characteristics from ONFI timing mode. */
const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
#endif /* __LINUX_MTD_NAND_H */