diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index 6c5630c0a8..bd1c3e0335 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -501,7 +501,8 @@ static bool is_aligned(u64 addr, u64 size, u64 align)
 	return !(addr & (align - 1)) && !(size & (align - 1));
 }
 
-static u64 set_one_region(u64 start, u64 size, u64 attrs, int level)
+/* Use flag to indicate if attrs has more than d-cache attributes */
+static u64 set_one_region(u64 start, u64 size, u64 attrs, bool flag, int level)
 {
 	int levelshift = level2shift(level);
 	u64 levelsize = 1ULL << levelshift;
@@ -509,8 +510,13 @@ static u64 set_one_region(u64 start, u64 size, u64 attrs, int level)
 
 	/* Can we can just modify the current level block PTE? */
 	if (is_aligned(start, size, levelsize)) {
-		*pte &= ~PMD_ATTRINDX_MASK;
-		*pte |= attrs;
+		if (flag) {
+			*pte &= ~PMD_ATTRMASK;
+			*pte |= attrs & PMD_ATTRMASK;
+		} else {
+			*pte &= ~PMD_ATTRINDX_MASK;
+			*pte |= attrs & PMD_ATTRINDX_MASK;
+		}
 		debug("Set attrs=%llx pte=%p level=%d\n", attrs, pte, level);
 
 		return levelsize;
@@ -560,7 +566,8 @@ void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
 		u64 r;
 
 		for (level = 1; level < 4; level++) {
-			r = set_one_region(start, size, attrs, level);
+			/* Set d-cache attributes only */
+			r = set_one_region(start, size, attrs, false, level);
 			if (r) {
 				/* PTE successfully replaced */
 				size -= r;
@@ -581,6 +588,63 @@ void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
 	flush_dcache_range(real_start, real_start + real_size);
 }
 
+/*
+ * Modify MMU table for a region with updated PXN/UXN/Memory type/valid bits.
+ * The procecess is break-before-make. The target region will be marked as
+ * invalid during the process of changing.
+ */
+void mmu_change_region_attr(phys_addr_t addr, size_t siz, u64 attrs)
+{
+	int level;
+	u64 r, size, start;
+
+	start = addr;
+	size = siz;
+	/*
+	 * Loop through the address range until we find a page granule that fits
+	 * our alignment constraints, then set it to "invalid".
+	 */
+	while (size > 0) {
+		for (level = 1; level < 4; level++) {
+			/* Set PTE to fault */
+			r = set_one_region(start, size, PTE_TYPE_FAULT, true,
+					   level);
+			if (r) {
+				/* PTE successfully invalidated */
+				size -= r;
+				start += r;
+				break;
+			}
+		}
+	}
+
+	flush_dcache_range(gd->arch.tlb_addr,
+			   gd->arch.tlb_addr + gd->arch.tlb_size);
+	__asm_invalidate_tlb_all();
+
+	/*
+	 * Loop through the address range until we find a page granule that fits
+	 * our alignment constraints, then set it to the new cache attributes
+	 */
+	start = addr;
+	size = siz;
+	while (size > 0) {
+		for (level = 1; level < 4; level++) {
+			/* Set PTE to new attributes */
+			r = set_one_region(start, size, attrs, true, level);
+			if (r) {
+				/* PTE successfully updated */
+				size -= r;
+				start += r;
+				break;
+			}
+		}
+	}
+	flush_dcache_range(gd->arch.tlb_addr,
+			   gd->arch.tlb_addr + gd->arch.tlb_size);
+	__asm_invalidate_tlb_all();
+}
+
 #else	/* CONFIG_SYS_DCACHE_OFF */
 
 /*
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index b5609ff7a6..a99b1c6a99 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -89,6 +89,14 @@ config FSL_LSCH3
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
 
+config FSL_MC_ENET
+	bool "Management Complex network"
+	depends on ARCH_LS2080A
+	default y
+	select RESV_RAM
+	help
+	  Enable Management Complex (MC) network
+
 menu "Layerscape architecture"
 	depends on FSL_LSCH2 || FSL_LSCH3
 
@@ -277,6 +285,16 @@ config SYS_FSL_SDHC_CLK_DIV
 	  clock, in another word SDHC_clk = Platform_clk / this_divider.
 endmenu
 
+config RESV_RAM
+	bool
+	help
+	  Reserve memory from the top, tracked by gd->arch.resv_ram. This
+	  reserved RAM can be used by special driver that resides in memory
+	  after U-Boot exits. It's up to implementation to allocate and allow
+	  access to this reserved memory. For example, the reserved RAM can
+	  be at the high end of physical memory. The reserve RAM may be
+	  excluded from memory bank(s) passed to OS, or marked as reserved.
+
 config SYS_FSL_ERRATUM_A008336
 	bool
 
@@ -297,3 +315,11 @@ config SYS_FSL_ERRATUM_A009660
 
 config SYS_FSL_ERRATUM_A009929
 	bool
+
+config SYS_MC_RSV_MEM_ALIGN
+	hex "Management Complex reserved memory alignment"
+	depends on RESV_RAM
+	default 0x20000000
+	help
+	  Reserved memory needs to be aligned for MC to use. Default value
+	  is 512MB.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 335f225181..7e66ee08b5 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -101,12 +101,50 @@ static inline void final_mmu_setup(void)
 {
 	u64 tlb_addr_save = gd->arch.tlb_addr;
 	unsigned int el = current_el();
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
 	int index;
-#endif
 
 	mem_map = final_map;
 
+	/* Update mapping for DDR to actual size */
+	for (index = 0; index < ARRAY_SIZE(final_map) - 2; index++) {
+		/*
+		 * Find the entry for DDR mapping and update the address and
+		 * size. Zero-sized mapping will be skipped when creating MMU
+		 * table.
+		 */
+		switch (final_map[index].virt) {
+		case CONFIG_SYS_FSL_DRAM_BASE1:
+			final_map[index].virt = gd->bd->bi_dram[0].start;
+			final_map[index].phys = gd->bd->bi_dram[0].start;
+			final_map[index].size = gd->bd->bi_dram[0].size;
+			break;
+#ifdef CONFIG_SYS_FSL_DRAM_BASE2
+		case CONFIG_SYS_FSL_DRAM_BASE2:
+#if (CONFIG_NR_DRAM_BANKS >= 2)
+			final_map[index].virt = gd->bd->bi_dram[1].start;
+			final_map[index].phys = gd->bd->bi_dram[1].start;
+			final_map[index].size = gd->bd->bi_dram[1].size;
+#else
+			final_map[index].size = 0;
+#endif
+		break;
+#endif
+#ifdef CONFIG_SYS_FSL_DRAM_BASE3
+		case CONFIG_SYS_FSL_DRAM_BASE3:
+#if (CONFIG_NR_DRAM_BANKS >= 3)
+			final_map[index].virt = gd->bd->bi_dram[2].start;
+			final_map[index].phys = gd->bd->bi_dram[2].start;
+			final_map[index].size = gd->bd->bi_dram[2].size;
+#else
+			final_map[index].size = 0;
+#endif
+		break;
+#endif
+		default:
+			break;
+		}
+	}
+
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
 	if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
 		if (el == 3) {
@@ -143,21 +181,14 @@ static inline void final_mmu_setup(void)
 	setup_pgtables();
 	gd->arch.tlb_addr = tlb_addr_save;
 
-	/* flush new MMU table */
-	flush_dcache_range(gd->arch.tlb_addr,
-			   gd->arch.tlb_addr + gd->arch.tlb_size);
+	/* Disable cache and MMU */
+	dcache_disable();	/* TLBs are invalidated */
+	invalidate_icache_all();
 
 	/* point TTBR to the new table */
 	set_ttbr_tcr_mair(el, gd->arch.tlb_addr, get_tcr(el, NULL, NULL),
 			  MEMORY_ATTRIBUTES);
-	/*
-	 * EL3 MMU is already enabled, just need to invalidate TLB to load the
-	 * new table. The new table is compatible with the current table, if
-	 * MMU somehow walks through the new table before invalidation TLB,
-	 * it still works. So we don't need to turn off MMU here.
-	 * When EL2 MMU table is created by calling this function, MMU needs
-	 * to be enabled.
-	 */
+
 	set_sctlr(get_sctlr() | CR_M);
 }
 
@@ -524,15 +555,277 @@ phys_size_t board_reserve_ram_top(phys_size_t ram_size)
 {
 	phys_size_t ram_top = ram_size;
 
-#ifdef CONFIG_SYS_MEM_TOP_HIDE
-#error CONFIG_SYS_MEM_TOP_HIDE not to be used together with this function
-#endif
-
-/* Carve the MC private DRAM block from the end of DRAM */
 #ifdef CONFIG_FSL_MC_ENET
+	/* The start address of MC reserved memory needs to be aligned. */
 	ram_top -= mc_get_dram_block_size();
 	ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
 #endif
 
-	return ram_top;
+	return ram_size - ram_top;
+}
+
+phys_size_t get_effective_memsize(void)
+{
+	phys_size_t ea_size, rem = 0;
+
+	/*
+	 * For ARMv8 SoCs, DDR memory is split into two or three regions. The
+	 * first region is 2GB space at 0x8000_0000. If the memory extends to
+	 * the second region (or the third region if applicable), the secure
+	 * memory and Management Complex (MC) memory should be put into the
+	 * highest region, i.e. the end of DDR memory. CONFIG_MAX_MEM_MAPPED
+	 * is set to the size of first region so U-Boot doesn't relocate itself
+	 * into higher address. Should DDR be configured to skip the first
+	 * region, this function needs to be adjusted.
+	 */
+	if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
+		ea_size = CONFIG_MAX_MEM_MAPPED;
+		rem = gd->ram_size - ea_size;
+	} else {
+		ea_size = gd->ram_size;
+	}
+
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+	/* Check if we have enough space for secure memory */
+	if (rem > CONFIG_SYS_MEM_RESERVE_SECURE) {
+		rem -= CONFIG_SYS_MEM_RESERVE_SECURE;
+	} else {
+		if (ea_size > CONFIG_SYS_MEM_RESERVE_SECURE) {
+			ea_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+			rem = 0;	/* Presume MC requires more memory */
+		} else {
+			printf("Error: No enough space for secure memory.\n");
+		}
+	}
+#endif
+	/* Check if we have enough memory for MC */
+	if (rem < board_reserve_ram_top(rem)) {
+		/* Not enough memory in high region to reserve */
+		if (ea_size > board_reserve_ram_top(rem))
+			ea_size -= board_reserve_ram_top(rem);
+		else
+			printf("Error: No enough space for reserved memory.\n");
+	}
+
+	return ea_size;
+}
+
+void dram_init_banksize(void)
+{
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+	phys_size_t dp_ddr_size;
+#endif
+
+	/*
+	 * gd->ram_size has the total size of DDR memory, less reserved secure
+	 * memory. The DDR extends from low region to high region(s) presuming
+	 * no hole is created with DDR configuration. gd->arch.secure_ram tracks
+	 * the location of secure memory. gd->arch.resv_ram tracks the location
+	 * of reserved memory for Management Complex (MC).
+	 */
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
+		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
+		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+		gd->bd->bi_dram[1].size = gd->ram_size -
+					  CONFIG_SYS_DDR_BLOCK1_SIZE;
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+		if (gd->bi_dram[1].size > CONFIG_SYS_DDR_BLOCK2_SIZE) {
+			gd->bd->bi_dram[2].start = CONFIG_SYS_DDR_BLOCK3_BASE;
+			gd->bd->bi_dram[2].size = gd->bd->bi_dram[1].size -
+						  CONFIG_SYS_DDR_BLOCK2_SIZE;
+			gd->bd->bi_dram[1].size = CONFIG_SYS_DDR_BLOCK2_SIZE;
+		}
+#endif
+	} else {
+		gd->bd->bi_dram[0].size = gd->ram_size;
+	}
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+	if (gd->bd->bi_dram[2].size >= CONFIG_SYS_MEM_RESERVE_SECURE) {
+		gd->bd->bi_dram[2].size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+		gd->arch.secure_ram = gd->bd->bi_dram[2].start +
+				      gd->bd->bi_dram[2].size;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+	} else
+#endif
+	{
+		if (gd->bd->bi_dram[1].size >= CONFIG_SYS_MEM_RESERVE_SECURE) {
+			gd->bd->bi_dram[1].size -=
+					CONFIG_SYS_MEM_RESERVE_SECURE;
+			gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+					      gd->bd->bi_dram[1].size;
+			gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+			gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+		} else if (gd->bd->bi_dram[0].size >
+					CONFIG_SYS_MEM_RESERVE_SECURE) {
+			gd->bd->bi_dram[0].size -=
+					CONFIG_SYS_MEM_RESERVE_SECURE;
+			gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+					      gd->bd->bi_dram[0].size;
+			gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+			gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+		}
+	}
+#endif	/* CONFIG_SYS_MEM_RESERVE_SECURE */
+
+#ifdef CONFIG_FSL_MC_ENET
+	/* Assign memory for MC */
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+	if (gd->bd->bi_dram[2].size >=
+	    board_reserve_ram_top(gd->bd->bi_dram[2].size)) {
+		gd->arch.resv_ram = gd->bd->bi_dram[2].start +
+			    gd->bd->bi_dram[2].size -
+			    board_reserve_ram_top(gd->bd->bi_dram[2].size);
+	} else
+#endif
+	{
+		if (gd->bd->bi_dram[1].size >=
+		    board_reserve_ram_top(gd->bd->bi_dram[1].size)) {
+			gd->arch.resv_ram = gd->bd->bi_dram[1].start +
+				gd->bd->bi_dram[1].size -
+				board_reserve_ram_top(gd->bd->bi_dram[1].size);
+		} else if (gd->bd->bi_dram[0].size >
+			   board_reserve_ram_top(gd->bd->bi_dram[0].size)) {
+			gd->arch.resv_ram = gd->bd->bi_dram[0].start +
+				gd->bd->bi_dram[0].size -
+				board_reserve_ram_top(gd->bd->bi_dram[0].size);
+		}
+	}
+#endif	/* CONFIG_FSL_MC_ENET */
+
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#error "This SoC shouldn't have DP DDR"
+#endif
+	if (soc_has_dp_ddr()) {
+		/* initialize DP-DDR here */
+		puts("DP-DDR:  ");
+		/*
+		 * DDR controller use 0 as the base address for binding.
+		 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+		 */
+		dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+					  CONFIG_DP_DDR_CTRL,
+					  CONFIG_DP_DDR_NUM_CTRLS,
+					  CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
+					  NULL, NULL, NULL);
+		if (dp_ddr_size) {
+			gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+			gd->bd->bi_dram[2].size = dp_ddr_size;
+		} else {
+			puts("Not detected");
+		}
+	}
+#endif
+}
+
+#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
+void efi_add_known_memory(void)
+{
+	int i;
+	phys_addr_t ram_start, start;
+	phys_size_t ram_size;
+	u64 pages;
+
+	/* Add RAM */
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#error "This SoC shouldn't have DP DDR"
+#endif
+		if (i == 2)
+			continue;	/* skip DP-DDR */
+#endif
+		ram_start = gd->bd->bi_dram[i].start;
+		ram_size = gd->bd->bi_dram[i].size;
+#ifdef CONFIG_RESV_RAM
+		if (gd->arch.resv_ram >= ram_start &&
+		    gd->arch.resv_ram < ram_start + ram_size)
+			ram_size = gd->arch.resv_ram - ram_start;
+#endif
+		start = (ram_start + EFI_PAGE_MASK) & ~EFI_PAGE_MASK;
+		pages = (ram_size + EFI_PAGE_MASK) >> EFI_PAGE_SHIFT;
+
+		efi_add_memory_map(start, pages, EFI_CONVENTIONAL_MEMORY,
+				   false);
+	}
+}
+#endif
+
+/*
+ * Before DDR size is known, early MMU table have DDR mapped as device memory
+ * to avoid speculative access. To relocate U-Boot to DDR, "normal memory"
+ * needs to be set for these mappings.
+ * If a special case configures DDR with holes in the mapping, the holes need
+ * to be marked as invalid. This is not implemented in this function.
+ */
+void update_early_mmu_table(void)
+{
+	if (!gd->arch.tlb_addr)
+		return;
+
+	if (gd->ram_size <= CONFIG_SYS_FSL_DRAM_SIZE1) {
+		mmu_change_region_attr(
+					CONFIG_SYS_SDRAM_BASE,
+					gd->ram_size,
+					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
+					PTE_BLOCK_OUTER_SHARE		|
+					PTE_BLOCK_NS			|
+					PTE_TYPE_VALID);
+	} else {
+		mmu_change_region_attr(
+					CONFIG_SYS_SDRAM_BASE,
+					CONFIG_SYS_DDR_BLOCK1_SIZE,
+					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
+					PTE_BLOCK_OUTER_SHARE		|
+					PTE_BLOCK_NS			|
+					PTE_TYPE_VALID);
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#ifndef CONFIG_SYS_DDR_BLOCK2_SIZE
+#error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE"
+#endif
+		if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE >
+		    CONFIG_SYS_DDR_BLOCK2_SIZE) {
+			mmu_change_region_attr(
+					CONFIG_SYS_DDR_BLOCK2_BASE,
+					CONFIG_SYS_DDR_BLOCK2_SIZE,
+					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
+					PTE_BLOCK_OUTER_SHARE		|
+					PTE_BLOCK_NS			|
+					PTE_TYPE_VALID);
+			mmu_change_region_attr(
+					CONFIG_SYS_DDR_BLOCK3_BASE,
+					gd->ram_size -
+					CONFIG_SYS_DDR_BLOCK1_SIZE -
+					CONFIG_SYS_DDR_BLOCK2_SIZE,
+					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
+					PTE_BLOCK_OUTER_SHARE		|
+					PTE_BLOCK_NS			|
+					PTE_TYPE_VALID);
+		} else
+#endif
+		{
+			mmu_change_region_attr(
+					CONFIG_SYS_DDR_BLOCK2_BASE,
+					gd->ram_size -
+					CONFIG_SYS_DDR_BLOCK1_SIZE,
+					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
+					PTE_BLOCK_OUTER_SHARE		|
+					PTE_BLOCK_NS			|
+					PTE_TYPE_VALID);
+		}
+	}
+}
+
+__weak int dram_init(void)
+{
+	gd->ram_size = initdram(0);
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+	/* This will break-before-make MMU for DDR */
+	update_early_mmu_table();
+#endif
+
+	return 0;
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 9489f85c64..b54a937971 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -233,10 +233,8 @@ int sata_init(void)
 {
 	struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
 
-#ifdef CONFIG_ARCH_LS1046A
 	/* Disable SATA ECC */
 	out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
-#endif
 	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
 	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
 	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index 1dabdbb305..73a8680741 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -45,9 +45,6 @@ void board_init_f(ulong dummy)
 {
 	/* Clear global data */
 	memset((void *)gd, 0, sizeof(gd_t));
-#ifdef CONFIG_LS2080A
-	arch_cpu_init();
-#endif
 	board_early_init_f();
 	timer_init();
 #ifdef CONFIG_LS2080A
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 586ce17215..b5b08aae23 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -33,8 +33,8 @@
 #define CONFIG_SYS_FSL_OCRAM_SIZE	0x00020000 /* Real size 128K */
 
 /* DDR */
-#define CONFIG_SYS_LS2_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
-#define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_LS2_DDR_BLOCK1_SIZE
+#define CONFIG_SYS_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_DDR_BLOCK1_SIZE
 
 #define CONFIG_SYS_FSL_CCSR_GUR_LE
 #define CONFIG_SYS_FSL_CCSR_SCFG_LE
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index 4ea4aeaf4c..bcf3e3863e 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -115,7 +115,11 @@ static struct mm_region early_map[] = {
 	},
 	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
 	  CONFIG_SYS_FSL_DRAM_SIZE1,
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+#else	/* Start with nGnRnE and PXN and UXN to prevent speculative access */
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
+#endif
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
 	/* Map IFC region #2 up to CONFIG_SYS_FLASH_BASE for NAND boot */
@@ -130,7 +134,7 @@ static struct mm_region early_map[] = {
 	},
 	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
 	  CONFIG_SYS_FSL_DRAM_SIZE2,
-	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
 #elif defined(CONFIG_FSL_LSCH2)
@@ -158,12 +162,16 @@ static struct mm_region early_map[] = {
 	},
 	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
 	  CONFIG_SYS_FSL_DRAM_SIZE1,
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+#else	/* Start with nGnRnE and PXN and UXN to prevent speculative access */
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
+#endif
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
 	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
 	  CONFIG_SYS_FSL_DRAM_SIZE2,
-	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 43ae686a29..08ea8fb8ef 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -177,21 +177,23 @@ struct ccsr_gur {
 	u8	res_008[0x20-0x8];
 	u32	gpporcr1;	/* General-purpose POR configuration */
 	u32	gpporcr2;	/* General-purpose POR configuration 2 */
-#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT	25
-#define FSL_CHASSIS3_DCFG_FUSESR_VID_MASK	0x1F
-#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT	20
-#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK	0x1F
-	u32	dcfg_fusesr;	/* Fuse status register */
 	u32	gpporcr3;
 	u32	gpporcr4;
-	u8	res_034[0x70-0x34];
-	u32	devdisr;	/* Device disable control */
+	u8	res_030[0x60-0x30];
+#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT	2
+#define FSL_CHASSIS3_DCFG_FUSESR_VID_MASK	0x1F
+#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT	7
+#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK	0x1F
+	u32	dcfg_fusesr;	/* Fuse status register */
+	u8	res_064[0x70-0x64];
+	u32	devdisr;	/* Device disable control 1 */
 	u32	devdisr2;	/* Device disable control 2 */
 	u32	devdisr3;	/* Device disable control 3 */
 	u32	devdisr4;	/* Device disable control 4 */
 	u32	devdisr5;	/* Device disable control 5 */
 	u32	devdisr6;	/* Device disable control 6 */
-	u32	devdisr7;	/* Device disable control 7 */
+	u8	res_088[0x94-0x88];
+	u32	coredisr;	/* Device disable control 7 */
 #define FSL_CHASSIS3_DEVDISR2_DPMAC1	0x00000001
 #define FSL_CHASSIS3_DEVDISR2_DPMAC2	0x00000002
 #define FSL_CHASSIS3_DEVDISR2_DPMAC3	0x00000004
@@ -216,15 +218,11 @@ struct ccsr_gur {
 #define FSL_CHASSIS3_DEVDISR2_DPMAC22	0x00200000
 #define FSL_CHASSIS3_DEVDISR2_DPMAC23	0x00400000
 #define FSL_CHASSIS3_DEVDISR2_DPMAC24	0x00800000
-	u8	res_08c[0x90-0x8c];
-	u32	coredisru;	/* uppper portion for support of 64 cores */
-	u32	coredisrl;	/* lower portion for support of 64 cores */
 	u8	res_098[0xa0-0x98];
 	u32	pvr;		/* Processor version */
 	u32	svr;		/* System version */
-	u32	mvr;		/* Manufacturing version */
-	u8	res_0ac[0x100-0xac];
-	u32	rcwsr[32];	/* Reset control word status */
+	u8	res_0a8[0x100-0xa8];
+	u32	rcwsr[30];	/* Reset control word status */
 
 #define FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT	2
 #define FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK	0x1f
@@ -239,24 +237,53 @@ struct ccsr_gur {
 #define RCW_SB_EN_REG_INDEX	9
 #define RCW_SB_EN_MASK		0x00000400
 
-	u8	res_180[0x200-0x180];
-	u32	scratchrw[32];	/* Scratch Read/Write */
-	u8	res_280[0x300-0x280];
+	u8	res_178[0x200-0x178];
+	u32	scratchrw[16];	/* Scratch Read/Write */
+	u8	res_240[0x300-0x240];
 	u32	scratchw1r[4];	/* Scratch Read (Write once) */
 	u8	res_310[0x400-0x310];
 	u32	bootlocptrl;	/* Boot location pointer low-order addr */
 	u32	bootlocptrh;	/* Boot location pointer high-order addr */
-	u8	res_408[0x500-0x408];
-	u8	res_500[0x740-0x500];	/* add more registers when needed */
+	u8	res_408[0x520-0x408];
+	u32	usb1_amqr;
+	u32	usb2_amqr;
+	u8	res_528[0x530-0x528];	/* add more registers when needed */
+	u32	sdmm1_amqr;
+	u8	res_534[0x550-0x534];	/* add more registers when needed */
+	u32	sata1_amqr;
+	u32	sata2_amqr;
+	u8	res_558[0x570-0x558];	/* add more registers when needed */
+	u32	misc1_amqr;
+	u8	res_574[0x590-0x574];	/* add more registers when needed */
+	u32	spare1_amqr;
+	u32	spare2_amqr;
+	u8	res_598[0x620-0x598];	/* add more registers when needed */
+	u32	gencr[7];	/* General Control Registers */
+	u8	res_63c[0x640-0x63c];	/* add more registers when needed */
+	u32	cgensr1;	/* Core General Status Register */
+	u8	res_644[0x660-0x644];	/* add more registers when needed */
+	u32	cgencr1;	/* Core General Control Register */
+	u8	res_664[0x740-0x664];	/* add more registers when needed */
 	u32	tp_ityp[64];	/* Topology Initiator Type Register */
 	struct {
 		u32	upper;
 		u32	lower;
-	} tp_cluster[3];	/* Core Cluster n Topology Register */
-	u8	res_858[0x1000-0x858];
+	} tp_cluster[4];	/* Core cluster n Topology Register */
+	u8	res_864[0x920-0x864];	/* add more registers when needed */
+	u32 ioqoscr[8];	/*I/O Quality of Services Register */
+	u32 uccr;
+	u8	res_944[0x960-0x944];	/* add more registers when needed */
+	u32 ftmcr;
+	u8	res_964[0x990-0x964];	/* add more registers when needed */
+	u32 coredisablesr;
+	u8	res_994[0xa00-0x994];	/* add more registers when needed */
+	u32 sdbgcr; /*Secure Debug Confifuration Register */
+	u8	res_a04[0xbf8-0xa04];	/* add more registers when needed */
+	u32 ipbrr1;
+	u32 ipbrr2;
+	u8	res_858[0x1000-0xc00];
 };
 
-
 struct ccsr_clk_cluster_group {
 	struct {
 		u8	res_00[0x10];
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/mmu.h b/arch/arm/include/asm/arch-fsl-layerscape/mmu.h
index d54eacd4a0..d232bec1e4 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/mmu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/mmu.h
@@ -6,5 +6,5 @@
 
 #ifndef _ASM_ARMV8_FSL_LAYERSCAPE_MMU_H_
 #define _ASM_ARMV8_FSL_LAYERSCAPE_MMU_H_
-#include <asm/arch-armv8/mmu.h>
+void update_early_mmu_table(void);
 #endif /* _ASM_ARMV8_FSL_LAYERSCAPE_MMU_H_ */
diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h
index e9b4cdbbcd..a34990368e 100644
--- a/arch/arm/include/asm/armv8/mmu.h
+++ b/arch/arm/include/asm/armv8/mmu.h
@@ -53,6 +53,7 @@
 #define PTE_TYPE_FAULT		(0 << 0)
 #define PTE_TYPE_TABLE		(3 << 0)
 #define PTE_TYPE_BLOCK		(1 << 0)
+#define PTE_TYPE_VALID		(1 << 0)
 
 #define PTE_TABLE_PXN		(1UL << 59)
 #define PTE_TABLE_XN		(1UL << 60)
@@ -77,6 +78,10 @@
  */
 #define PMD_ATTRINDX(t)		((t) << 2)
 #define PMD_ATTRINDX_MASK	(7 << 2)
+#define PMD_ATTRMASK		(PTE_BLOCK_PXN		| \
+				 PTE_BLOCK_UXN		| \
+				 PMD_ATTRINDX_MASK	| \
+				 PTE_TYPE_VALID)
 
 /*
  * TCR flags.
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index ccb513fba2..fd627c0874 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -86,8 +86,8 @@
 /* For SD boot address and size are assigned in terms of sector
  * offset and no. of sectors respectively.
  */
-#define CONFIG_BS_HDR_ADDR_DEVICE	0x00000800
-#define CONFIG_BS_ADDR_DEVICE		0x00000840
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x00000900
+#define CONFIG_BS_ADDR_DEVICE		0x00000940
 #define CONFIG_BS_HDR_SIZE		0x00000010
 #define CONFIG_BS_SIZE			0x00000008
 #else
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index aee87cdcbf..dfcbcceba3 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -59,6 +59,13 @@ struct arch_global_data {
 	phys_addr_t secure_ram;
 	unsigned long tlb_allocated;
 #endif
+#ifdef CONFIG_RESV_RAM
+	/*
+	 * Reserved RAM for memory resident, eg. Management Complex (MC)
+	 * driver which continues to run after U-Boot exits.
+	 */
+	phys_addr_t resv_ram;
+#endif
 
 #ifdef CONFIG_ARCH_OMAP2
 	u32 omap_boot_device;
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 766e929d46..9c3261c884 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -226,6 +226,7 @@ void protect_secure_region(void);
 void smp_kick_all_cpus(void);
 
 void flush_l3_cache(void);
+void mmu_change_region_attr(phys_addr_t start, size_t size, u64 attrs);
 
 /*
  *Issue a secure monitor call in accordance with ARM "SMC Calling convention",
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index 1a503042f0..9b65c13b1a 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -284,10 +284,170 @@ static int set_voltage(int i2caddress, int vdd)
 	return vdd_last;
 }
 
+#ifdef CONFIG_FSL_LSCH3
 int adjust_vdd(ulong vdd_override)
 {
 	int re_enable = disable_interrupts();
-#if defined(CONFIG_FSL_LSCH2) || defined(CONFIG_FSL_LSCH3)
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 fusesr;
+	u8 vid, buf;
+	int vdd_target, vdd_current, vdd_last;
+	int ret, i2caddress;
+	unsigned long vdd_string_override;
+	char *vdd_string;
+	static const uint16_t vdd[32] = {
+		10500,
+		0,      /* reserved */
+		9750,
+		0,      /* reserved */
+		9500,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		10000,  /* 1.0000V */
+		0,      /* reserved */
+		10250,
+		0,      /* reserved */
+		10500,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+	};
+	struct vdd_drive {
+		u8 vid;
+		unsigned voltage;
+	};
+
+	ret = i2c_multiplexer_select_vid_channel(I2C_MUX_CH_VOL_MONITOR);
+	if (ret) {
+		debug("VID: I2C failed to switch channel\n");
+		ret = -1;
+		goto exit;
+	}
+	ret = find_ir_chip_on_i2c();
+	if (ret < 0) {
+		printf("VID: Could not find voltage regulator on I2C.\n");
+		ret = -1;
+		goto exit;
+	} else {
+		i2caddress = ret;
+		debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress);
+	}
+
+	/* check IR chip work on Intel mode*/
+	ret = i2c_read(i2caddress,
+		       IR36021_INTEL_MODE_OOFSET,
+		       1, (void *)&buf, 1);
+	if (ret) {
+		printf("VID: failed to read IR chip mode.\n");
+		ret = -1;
+		goto exit;
+	}
+	if ((buf & IR36021_MODE_MASK) != IR36021_INTEL_MODE) {
+		printf("VID: IR Chip is not used in Intel mode.\n");
+		ret = -1;
+		goto exit;
+	}
+
+	/* get the voltage ID from fuse status register */
+	fusesr = in_le32(&gur->dcfg_fusesr);
+	vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT) &
+		FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK;
+	if ((vid == 0) || (vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK)) {
+		vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT) &
+			FSL_CHASSIS3_DCFG_FUSESR_VID_MASK;
+	}
+	vdd_target = vdd[vid];
+
+	/* check override variable for overriding VDD */
+	vdd_string = getenv(CONFIG_VID_FLS_ENV);
+	if (vdd_override == 0 && vdd_string &&
+	    !strict_strtoul(vdd_string, 10, &vdd_string_override))
+		vdd_override = vdd_string_override;
+
+	if (vdd_override >= VDD_MV_MIN && vdd_override <= VDD_MV_MAX) {
+		vdd_target = vdd_override * 10; /* convert to 1/10 mV */
+		debug("VDD override is %lu\n", vdd_override);
+	} else if (vdd_override != 0) {
+		printf("Invalid value.\n");
+	}
+
+	/* divide and round up by 10 to get a value in mV */
+	vdd_target = DIV_ROUND_UP(vdd_target, 10);
+	if (vdd_target == 0) {
+		debug("VID: VID not used\n");
+		ret = 0;
+		goto exit;
+	} else if (vdd_target < VDD_MV_MIN || vdd_target > VDD_MV_MAX) {
+		/* Check vdd_target is in valid range */
+		printf("VID: Target VID %d mV is not in range.\n",
+		       vdd_target);
+		ret = -1;
+		goto exit;
+	} else {
+		debug("VID: vid = %d mV\n", vdd_target);
+	}
+
+	/*
+	 * Read voltage monitor to check real voltage.
+	 */
+	vdd_last = read_voltage(i2caddress);
+	if (vdd_last < 0) {
+		printf("VID: Couldn't read sensor abort VID adjustment\n");
+		ret = -1;
+		goto exit;
+	}
+	vdd_current = vdd_last;
+	debug("VID: Core voltage is currently at %d mV\n", vdd_last);
+	/*
+	  * Adjust voltage to at or one step above target.
+	  * As measurements are less precise than setting the values
+	  * we may run through dummy steps that cancel each other
+	  * when stepping up and then down.
+	  */
+	while (vdd_last > 0 &&
+	       vdd_last < vdd_target) {
+		vdd_current += IR_VDD_STEP_UP;
+		vdd_last = set_voltage(i2caddress, vdd_current);
+	}
+	while (vdd_last > 0 &&
+	       vdd_last > vdd_target + (IR_VDD_STEP_DOWN - 1)) {
+		vdd_current -= IR_VDD_STEP_DOWN;
+		vdd_last = set_voltage(i2caddress, vdd_current);
+	}
+
+	if (vdd_last > 0)
+		printf("VID: Core voltage after adjustment is at %d mV\n",
+		       vdd_last);
+	else
+		ret = -1;
+exit:
+	if (re_enable)
+		enable_interrupts();
+	i2c_multiplexer_select_vid_channel(I2C_MUX_CH_DEFAULT);
+	return ret;
+}
+#else /* !CONFIG_FSL_LSCH3 */
+int adjust_vdd(ulong vdd_override)
+{
+	int re_enable = disable_interrupts();
+#if defined(CONFIG_FSL_LSCH2)
 	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 #else
 	ccsr_gur_t __iomem *gur =
@@ -364,11 +524,7 @@ int adjust_vdd(ulong vdd_override)
 	}
 
 	/* get the voltage ID from fuse status register */
-#ifdef CONFIG_FSL_LSCH3
-	fusesr = in_le32(&gur->dcfg_fusesr);
-#else
 	fusesr = in_be32(&gur->dcfg_fusesr);
-#endif
 	/*
 	 * VID is used according to the table below
 	 *                ---------------------------------------
@@ -393,13 +549,6 @@ int adjust_vdd(ulong vdd_override)
 		vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) &
 			FSL_CHASSIS2_DCFG_FUSESR_VID_MASK;
 	}
-#elif defined(CONFIG_FSL_LSCH3)
-	vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT) &
-		FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK;
-	if ((vid == 0) || (vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK)) {
-		vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT) &
-			FSL_CHASSIS3_DCFG_FUSESR_VID_MASK;
-	}
 #else
 	vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
 		FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
@@ -472,6 +621,7 @@ exit:
 
 	return ret;
 }
+#endif
 
 static int print_vdd(void)
 {
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index 789cae225b..25d22d25bf 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -12,6 +12,7 @@
 #ifdef CONFIG_FSL_LS_PPA
 #include <asm/arch/ppa.h>
 #endif
+#include <asm/arch/mmu.h>
 #include <asm/arch/soc.h>
 #include <hwconfig.h>
 #include <environment.h>
@@ -48,6 +49,10 @@ int dram_init(void)
 	mmdc_init(&mparam);
 
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+	/* This will break-before-make MMU for DDR */
+	update_early_mmu_table();
+#endif
 
 	return 0;
 }
@@ -91,32 +96,3 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 	return 0;
 }
-
-void dram_init_banksize(void)
-{
-	/*
-	 * gd->arch.secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-			CONFIG_SYS_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-			gd->arch.secure_ram -
-			CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-			gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-}
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
index 4281790426..97ab3400ad 100644
--- a/board/freescale/ls1012aqds/ls1012aqds.c
+++ b/board/freescale/ls1012aqds/ls1012aqds.c
@@ -14,6 +14,7 @@
 #include <asm/arch/ppa.h>
 #endif
 #include <asm/arch/fdt.h>
+#include <asm/arch/mmu.h>
 #include <asm/arch/soc.h>
 #include <ahci.h>
 #include <hwconfig.h>
@@ -76,6 +77,10 @@ int dram_init(void)
 	mmdc_init(&mparam);
 
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+	/* This will break-before-make MMU for DDR */
+	update_early_mmu_table();
+#endif
 
 	return 0;
 }
@@ -166,32 +171,3 @@ int ft_board_setup(void *blob, bd_t *bd)
 	return 0;
 }
 #endif
-
-void dram_init_banksize(void)
-{
-	/*
-	 * gd->arch.secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-			CONFIG_SYS_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-			gd->arch.secure_ram -
-			CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-			gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-}
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
index e3a8a7631b..a23a23be1f 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -12,6 +12,7 @@
 #ifdef CONFIG_FSL_LS_PPA
 #include <asm/arch/ppa.h>
 #endif
+#include <asm/arch/mmu.h>
 #include <asm/arch/soc.h>
 #include <hwconfig.h>
 #include <ahci.h>
@@ -80,6 +81,10 @@ int dram_init(void)
 	mmdc_init(&mparam);
 
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+	/* This will break-before-make MMU for DDR */
+	update_early_mmu_table();
+#endif
 
 	return 0;
 }
@@ -165,32 +170,3 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 	return 0;
 }
-
-void dram_init_banksize(void)
-{
-	/*
-	 * gd->secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-			CONFIG_SYS_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-			gd->arch.secure_ram -
-			CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-			gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-}
diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c
index 7882a9a9a1..c740062887 100644
--- a/board/freescale/ls1043aqds/ddr.c
+++ b/board/freescale/ls1043aqds/ddr.c
@@ -127,32 +127,3 @@ phys_size_t initdram(int board_type)
 
 	return dram_size;
 }
-
-void dram_init_banksize(void)
-{
-	/*
-	 * gd->arch.secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-					  CONFIG_SYS_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-				      gd->arch.secure_ram -
-				      CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-				      gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-}
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index 8835a49bb5..6507c09143 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -11,6 +11,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/fdt.h>
+#include <asm/arch/mmu.h>
 #include <asm/arch/soc.h>
 #include <ahci.h>
 #include <hwconfig.h>
@@ -153,6 +154,10 @@ int dram_init(void)
 	 */
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 	gd->ram_size = initdram(0);
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+	/* This will break-before-make MMU for DDR */
+	update_early_mmu_table();
+#endif
 
 	return 0;
 }
diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c
index 849f1d1b66..f90b85df1a 100644
--- a/board/freescale/ls1043ardb/ddr.c
+++ b/board/freescale/ls1043ardb/ddr.c
@@ -188,32 +188,3 @@ phys_size_t initdram(int board_type)
 
 	return dram_size;
 }
-
-void dram_init_banksize(void)
-{
-	/*
-	 * gd->arch.secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-					  CONFIG_SYS_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-				      gd->arch.secure_ram -
-				      CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-				      gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-}
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index e213128c1b..2333843958 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -67,13 +67,6 @@ int checkboard(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	gd->ram_size = initdram(0);
-
-	return 0;
-}
-
 int board_early_init_f(void)
 {
 	fsl_lsch2_early_init_f();
diff --git a/board/freescale/ls1046aqds/ddr.c b/board/freescale/ls1046aqds/ddr.c
index 4ea8b236bf..dc4d689adc 100644
--- a/board/freescale/ls1046aqds/ddr.c
+++ b/board/freescale/ls1046aqds/ddr.c
@@ -112,32 +112,3 @@ phys_size_t initdram(int board_type)
 
 	return dram_size;
 }
-
-void dram_init_banksize(void)
-{
-	/*
-	 * gd->arch.secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-					  CONFIG_SYS_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-				 gd->arch.secure_ram -
-				 CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-				 gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-}
diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c
index 552365b9d8..af3f70a38b 100644
--- a/board/freescale/ls1046aqds/ls1046aqds.c
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@@ -11,6 +11,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/fdt.h>
+#include <asm/arch/mmu.h>
 #include <asm/arch/soc.h>
 #include <ahci.h>
 #include <hwconfig.h>
@@ -149,6 +150,10 @@ int dram_init(void)
 	 */
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 	gd->ram_size = initdram(0);
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+	/* This will break-before-make MMU for DDR */
+	update_early_mmu_table();
+#endif
 
 	return 0;
 }
diff --git a/board/freescale/ls1046ardb/ddr.c b/board/freescale/ls1046ardb/ddr.c
index dd3b5d0e6b..efe2ba6eb1 100644
--- a/board/freescale/ls1046ardb/ddr.c
+++ b/board/freescale/ls1046ardb/ddr.c
@@ -112,32 +112,3 @@ phys_size_t initdram(int board_type)
 
 	return dram_size;
 }
-
-void dram_init_banksize(void)
-{
-	/*
-	 * gd->arch.secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-					  CONFIG_SYS_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-				 gd->arch.secure_ram -
-				 CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-				 gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-}
diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c
index 33a58cf440..02b6c4c375 100644
--- a/board/freescale/ls1046ardb/ls1046ardb.c
+++ b/board/freescale/ls1046ardb/ls1046ardb.c
@@ -56,13 +56,6 @@ int checkboard(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	gd->ram_size = initdram(0);
-
-	return 0;
-}
-
 int board_early_init_f(void)
 {
 	fsl_lsch2_early_init_f();
diff --git a/board/freescale/ls2080a/ddr.c b/board/freescale/ls2080a/ddr.c
index e6130ec709..5ed9e1461b 100644
--- a/board/freescale/ls2080a/ddr.c
+++ b/board/freescale/ls2080a/ddr.c
@@ -169,58 +169,3 @@ phys_size_t initdram(int board_type)
 
 	return dram_size;
 }
-
-void dram_init_banksize(void)
-{
-#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	phys_size_t dp_ddr_size;
-#endif
-
-	/*
-	 * gd->arch.secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-					  CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-				      gd->arch.secure_ram -
-				      CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-				      gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-
-#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	if (soc_has_dp_ddr()) {
-		/* initialize DP-DDR here */
-		puts("DP-DDR:  ");
-		/*
-		 * DDR controller use 0 as the base address for binding.
-		 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
-		 */
-		dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
-					  CONFIG_DP_DDR_CTRL,
-					  CONFIG_DP_DDR_NUM_CTRLS,
-					  CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
-					  NULL, NULL, NULL);
-		if (dp_ddr_size) {
-			gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
-			gd->bd->bi_dram[2].size = dp_ddr_size;
-		} else {
-			puts("Not detected");
-		}
-	}
-#endif
-}
diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c
index 4f9b9c8a77..9e7701d81f 100644
--- a/board/freescale/ls2080a/ls2080a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -49,13 +49,6 @@ void detail_board_ddr_info(void)
 #endif
 }
 
-int dram_init(void)
-{
-	gd->ram_size = initdram(0);
-
-	return 0;
-}
-
 #if defined(CONFIG_ARCH_MISC_INIT)
 int arch_misc_init(void)
 {
@@ -123,6 +116,16 @@ int ft_board_setup(void *blob, bd_t *bd)
 	base[1] = gd->bd->bi_dram[1].start;
 	size[1] = gd->bd->bi_dram[1].size;
 
+#ifdef CONFIG_RESV_RAM
+	/* reduce size if reserved memory is within this bank */
+	if (gd->arch.resv_ram >= base[0] &&
+	    gd->arch.resv_ram < base[0] + size[0])
+		size[0] = gd->arch.resv_ram - base[0];
+	else if (gd->arch.resv_ram >= base[1] &&
+		 gd->arch.resv_ram < base[1] + size[1])
+		size[1] = gd->arch.resv_ram - base[1];
+#endif
+
 	fdt_fixup_memory_banks(blob, base, size, 2);
 
 #ifdef CONFIG_FSL_MC_ENET
diff --git a/board/freescale/ls2080aqds/ddr.c b/board/freescale/ls2080aqds/ddr.c
index 9c6f477c7f..0408c0fc25 100644
--- a/board/freescale/ls2080aqds/ddr.c
+++ b/board/freescale/ls2080aqds/ddr.c
@@ -169,58 +169,3 @@ phys_size_t initdram(int board_type)
 
 	return dram_size;
 }
-
-void dram_init_banksize(void)
-{
-#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	phys_size_t dp_ddr_size;
-#endif
-
-	/*
-	 * gd->arch.secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-					  CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-				      gd->arch.secure_ram -
-				      CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-				      gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-
-#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	if (soc_has_dp_ddr()) {
-		/* initialize DP-DDR here */
-		puts("DP-DDR:  ");
-		/*
-		 * DDR controller use 0 as the base address for binding.
-		 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
-		 */
-		dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
-					  CONFIG_DP_DDR_CTRL,
-					  CONFIG_DP_DDR_NUM_CTRLS,
-					  CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
-					  NULL, NULL, NULL);
-		if (dp_ddr_size) {
-			gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
-			gd->bd->bi_dram[2].size = dp_ddr_size;
-		} else {
-			puts("Not detected");
-		}
-	}
-#endif
-}
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index 73a61fd75a..277013bfcc 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -22,6 +22,7 @@
 
 #include "../common/qixis.h"
 #include "ls2080aqds_qixis.h"
+#include "../common/vid.h"
 
 #define PIN_MUX_SEL_SDHC	0x00
 #define PIN_MUX_SEL_DSPI	0x0a
@@ -240,6 +241,14 @@ int board_early_init_f(void)
 	return 0;
 }
 
+int misc_init_r(void)
+{
+	if (adjust_vdd(0))
+		printf("Warning: Adjusting core voltage failed.\n");
+
+	return 0;
+}
+
 void detail_board_ddr_info(void)
 {
 	puts("\nDDR    ");
@@ -254,13 +263,6 @@ void detail_board_ddr_info(void)
 #endif
 }
 
-int dram_init(void)
-{
-	gd->ram_size = initdram(0);
-
-	return 0;
-}
-
 #if defined(CONFIG_ARCH_MISC_INIT)
 int arch_misc_init(void)
 {
@@ -313,6 +315,16 @@ int ft_board_setup(void *blob, bd_t *bd)
 	base[1] = gd->bd->bi_dram[1].start;
 	size[1] = gd->bd->bi_dram[1].size;
 
+#ifdef CONFIG_RESV_RAM
+	/* reduce size if reserved memory is within this bank */
+	if (gd->arch.resv_ram >= base[0] &&
+	    gd->arch.resv_ram < base[0] + size[0])
+		size[0] = gd->arch.resv_ram - base[0];
+	else if (gd->arch.resv_ram >= base[1] &&
+		 gd->arch.resv_ram < base[1] + size[1])
+		size[1] = gd->arch.resv_ram - base[1];
+#endif
+
 	fdt_fixup_memory_banks(blob, base, size, 2);
 
 	fsl_fdt_fixup_dr_usb(blob, bd);
diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c
index 959dfeb02b..2851d5b443 100644
--- a/board/freescale/ls2080ardb/ddr.c
+++ b/board/freescale/ls2080ardb/ddr.c
@@ -172,58 +172,3 @@ phys_size_t initdram(int board_type)
 
 	return dram_size;
 }
-
-void dram_init_banksize(void)
-{
-#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	phys_size_t dp_ddr_size;
-#endif
-
-	/*
-	 * gd->arch.secure_ram tracks the location of secure memory.
-	 * It was set as if the memory starts from 0.
-	 * The address needs to add the offset of its bank.
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
-		gd->bd->bi_dram[1].size = gd->ram_size -
-					  CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
-				      gd->arch.secure_ram -
-				      CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	} else {
-		gd->bd->bi_dram[0].size = gd->ram_size;
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
-				      gd->arch.secure_ram;
-		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-#endif
-	}
-
-#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
-	if (soc_has_dp_ddr()) {
-		/* initialize DP-DDR here */
-		puts("DP-DDR:  ");
-		/*
-		 * DDR controller use 0 as the base address for binding.
-		 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
-		 */
-		dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
-					  CONFIG_DP_DDR_CTRL,
-					  CONFIG_DP_DDR_NUM_CTRLS,
-					  CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
-					  NULL, NULL, NULL);
-		if (dp_ddr_size) {
-			gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
-			gd->bd->bi_dram[2].size = dp_ddr_size;
-		} else {
-			puts("Not detected");
-		}
-	}
-#endif
-}
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 02954ef6d7..4c01f560bc 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -17,6 +17,7 @@
 #include <environment.h>
 #include <efi_loader.h>
 #include <i2c.h>
+#include <asm/arch/mmu.h>
 #include <asm/arch/soc.h>
 #include <fsl_sec.h>
 
@@ -202,14 +203,6 @@ int misc_init_r(void)
 	if (adjust_vdd(0))
 		printf("Warning: Adjusting core voltage failed.\n");
 
-#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
-	if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
-		efi_add_memory_map(gd->bd->bi_dram[2].start,
-				   gd->bd->bi_dram[2].size >> EFI_PAGE_SHIFT,
-				   EFI_RESERVED_MEMORY_TYPE, false);
-	}
-#endif
-
 	return 0;
 }
 
@@ -227,13 +220,6 @@ void detail_board_ddr_info(void)
 #endif
 }
 
-int dram_init(void)
-{
-	gd->ram_size = initdram(0);
-
-	return 0;
-}
-
 #if defined(CONFIG_ARCH_MISC_INIT)
 int arch_misc_init(void)
 {
@@ -286,6 +272,16 @@ int ft_board_setup(void *blob, bd_t *bd)
 	base[1] = gd->bd->bi_dram[1].start;
 	size[1] = gd->bd->bi_dram[1].size;
 
+#ifdef CONFIG_RESV_RAM
+	/* reduce size if reserved memory is within this bank */
+	if (gd->arch.resv_ram >= base[0] &&
+	    gd->arch.resv_ram < base[0] + size[0])
+		size[0] = gd->arch.resv_ram - base[0];
+	else if (gd->arch.resv_ram >= base[1] &&
+		 gd->arch.resv_ram < base[1] + size[1])
+		size[1] = gd->arch.resv_ram - base[1];
+#endif
+
 	fdt_fixup_memory_banks(blob, base, size, 2);
 
 	fsl_fdt_fixup_dr_usb(blob, bd);
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index ae3027a297..19b8fd88fa 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -392,6 +392,10 @@ static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
 			  gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK);
 	}
 #endif
+#ifdef CONFIG_RESV_RAM
+	if (gd->arch.resv_ram)
+		print_num("Reserved ram", gd->arch.resv_ram);
+#endif
 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
 	print_eths();
 #endif
diff --git a/common/board_f.c b/common/board_f.c
index ae6cd8528c..7d1ede0404 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -325,15 +325,6 @@ __weak ulong board_get_usable_ram_top(ulong total_size)
 	return gd->ram_top;
 }
 
-__weak phys_size_t board_reserve_ram_top(phys_size_t ram_size)
-{
-#ifdef CONFIG_SYS_MEM_TOP_HIDE
-	return ram_size - CONFIG_SYS_MEM_TOP_HIDE;
-#else
-	return ram_size;
-#endif
-}
-
 static int setup_dest_addr(void)
 {
 	debug("Monitor len: %08lX\n", gd->mon_len);
@@ -341,26 +332,19 @@ static int setup_dest_addr(void)
 	 * Ram is setup, size stored in gd !!
 	 */
 	debug("Ram size: %08lX\n", (ulong)gd->ram_size);
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-	/* Reserve memory for secure MMU tables, and/or security monitor */
-	gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
-	/*
-	 * Record secure memory location. Need recalcuate if memory splits
-	 * into banks, or the ram base is not zero.
-	 */
-	gd->arch.secure_ram = gd->ram_size;
-#endif
+#if defined(CONFIG_SYS_MEM_TOP_HIDE)
 	/*
 	 * Subtract specified amount of memory to hide so that it won't
 	 * get "touched" at all by U-Boot. By fixing up gd->ram_size
 	 * the Linux kernel should now get passed the now "corrected"
-	 * memory size and won't touch it either. This has been used
-	 * by arch/powerpc exclusively. Now ARMv8 takes advantage of
-	 * thie mechanism. If memory is split into banks, addresses
-	 * need to be calculated.
+	 * memory size and won't touch it either. This should work
+	 * for arch/ppc and arch/powerpc. Only Linux board ports in
+	 * arch/powerpc with bootwrapper support, that recalculate the
+	 * memory size from the SDRAM controller setup will have to
+	 * get fixed.
 	 */
-	gd->ram_size = board_reserve_ram_top(gd->ram_size);
-
+	gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
+#endif
 #ifdef CONFIG_SYS_SDRAM_BASE
 	gd->ram_top = CONFIG_SYS_SDRAM_BASE;
 #endif
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index 079082a26f..9f69d75a89 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -154,48 +154,6 @@ int parse_mc_firmware_fit_image(u64 mc_fw_addr,
 }
 #endif
 
-/*
- * Calculates the values to be used to specify the address range
- * for the MC private DRAM block, in the MCFBALR/MCFBAHR registers.
- * It returns the highest 512MB-aligned address within the given
- * address range, in '*aligned_base_addr', and the number of 256 MiB
- * blocks in it, in 'num_256mb_blocks'.
- */
-static int calculate_mc_private_ram_params(u64 mc_private_ram_start_addr,
-					   size_t mc_ram_size,
-					   u64 *aligned_base_addr,
-					   u8 *num_256mb_blocks)
-{
-	u64 addr;
-	u16 num_blocks;
-
-	if (mc_ram_size % MC_RAM_SIZE_ALIGNMENT != 0) {
-		printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n",
-		       mc_ram_size);
-		return -EINVAL;
-	}
-
-	num_blocks = mc_ram_size / MC_RAM_SIZE_ALIGNMENT;
-	if (num_blocks < 1 || num_blocks > 0xff) {
-		printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n",
-		       mc_ram_size);
-		return -EINVAL;
-	}
-
-	addr = (mc_private_ram_start_addr + mc_ram_size - 1) &
-		MC_RAM_BASE_ADDR_ALIGNMENT_MASK;
-
-	if (addr < mc_private_ram_start_addr) {
-		printf("fsl-mc: ERROR: bad start address %#llx\n",
-		       mc_private_ram_start_addr);
-		return -EFAULT;
-	}
-
-	*aligned_base_addr = addr;
-	*num_256mb_blocks = num_blocks;
-	return 0;
-}
-
 static int mc_fixup_dpc_mac_addr(void *blob, int noff, int dpmac_id,
 		struct eth_device *eth_dev)
 {
@@ -550,17 +508,16 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr)
 	size_t raw_image_size = 0;
 #endif
 	struct mc_version mc_ver_info;
-	u64 mc_ram_aligned_base_addr;
 	u8 mc_ram_num_256mb_blocks;
 	size_t mc_ram_size = mc_get_dram_block_size();
 
-
-	error = calculate_mc_private_ram_params(mc_ram_addr,
-						mc_ram_size,
-						&mc_ram_aligned_base_addr,
-						&mc_ram_num_256mb_blocks);
-	if (error != 0)
+	mc_ram_num_256mb_blocks = mc_ram_size / MC_RAM_SIZE_ALIGNMENT;
+	if (mc_ram_num_256mb_blocks < 1 || mc_ram_num_256mb_blocks > 0xff) {
+		error = -EINVAL;
+		printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n",
+		       mc_ram_size);
 		goto out;
+	}
 
 	/*
 	 * Management Complex cores should be held at reset out of POR.
@@ -602,11 +559,11 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr)
 	/*
 	 * Tell MC what is the address range of the DRAM block assigned to it:
 	 */
-	reg_mcfbalr = (u32)mc_ram_aligned_base_addr |
+	reg_mcfbalr = (u32)mc_ram_addr |
 		      (mc_ram_num_256mb_blocks - 1);
 	out_le32(&mc_ccsr_regs->reg_mcfbalr, reg_mcfbalr);
 	out_le32(&mc_ccsr_regs->reg_mcfbahr,
-		 (u32)(mc_ram_aligned_base_addr >> 32));
+		 (u32)(mc_ram_addr >> 32));
 	out_le32(&mc_ccsr_regs->reg_mcfapr, FSL_BYPASS_AMQ);
 
 	/*
@@ -714,21 +671,7 @@ int get_dpl_apply_status(void)
  */
 u64 mc_get_dram_addr(void)
 {
-	u64 mc_ram_addr;
-
-	/*
-	 * The MC private DRAM block was already carved at the end of DRAM
-	 * by board_init_f() using CONFIG_SYS_MEM_TOP_HIDE:
-	 */
-	if (gd->bd->bi_dram[1].start) {
-		mc_ram_addr =
-			gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size;
-	} else {
-		mc_ram_addr =
-			gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
-	}
-
-	return mc_ram_addr;
+	return gd->arch.resv_ram;
 }
 
 /**
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 7279c89db5..fe87ab3c8c 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -133,9 +133,9 @@
  * size increases then increase this size in case of secure boot as
  * it uses raw u-boot image instead of fit image.
  */
-#define CONFIG_SYS_MONITOR_LEN		(0x80000 + CONFIG_U_BOOT_HDR_SIZE)
+#define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
-#define CONFIG_SYS_MONITOR_LEN		0x80000
+#define CONFIG_SYS_MONITOR_LEN		0x100000
 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 #endif
 
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index f3b521d705..6a345c0400 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -38,7 +38,9 @@ unsigned long get_board_ddr_clk(void);
 #define SPD_EEPROM_ADDRESS		0x51
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#endif
 
 #define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 8fa3bb3a64..f185380ae3 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -29,7 +29,9 @@
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
 #define CONFIG_FSL_DDR_BIST
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#endif
 #define CONFIG_SYS_DDR_RAW_TIMING
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index cba22ca2b6..4b3b21eaa1 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -38,7 +38,9 @@ unsigned long get_board_ddr_clk(void);
 #define SPD_EEPROM_ADDRESS		0x51
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#endif
 
 #define CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index a96aa650f7..2141b8299a 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -34,7 +34,9 @@
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 4ba273aeef..816d7f5a4c 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -141,7 +141,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_NAND_BASE_PHYS		0x30000000
 
 /* MC firmware */
-#define CONFIG_FSL_MC_ENET
 /* TODO Actual DPL max length needs to be confirmed with the MC FW team */
 #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH	    0x20000
 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET    0x00F00000
@@ -159,7 +158,6 @@ unsigned long long get_qixis_addr(void);
  */
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE		(512UL * 1024 * 1024)
-#define CONFIG_SYS_MC_RSV_MEM_ALIGN			(512UL * 1024 * 1024)
 #endif
 
 /* Command line configuration */
diff --git a/lib/efi_loader/efi_memory.c b/lib/efi_loader/efi_memory.c
index 95aa590c8a..db2ae19f59 100644
--- a/lib/efi_loader/efi_memory.c
+++ b/lib/efi_loader/efi_memory.c
@@ -431,11 +431,8 @@ efi_status_t efi_get_memory_map(unsigned long *memory_map_size,
 	return EFI_SUCCESS;
 }
 
-int efi_memory_init(void)
+__weak void efi_add_known_memory(void)
 {
-	unsigned long runtime_start, runtime_end, runtime_pages;
-	unsigned long uboot_start, uboot_pages;
-	unsigned long uboot_stack_size = 16 * 1024 * 1024;
 	int i;
 
 	/* Add RAM */
@@ -448,6 +445,15 @@ int efi_memory_init(void)
 		efi_add_memory_map(start, pages, EFI_CONVENTIONAL_MEMORY,
 				   false);
 	}
+}
+
+int efi_memory_init(void)
+{
+	unsigned long runtime_start, runtime_end, runtime_pages;
+	unsigned long uboot_start, uboot_pages;
+	unsigned long uboot_stack_size = 16 * 1024 * 1024;
+
+	efi_add_known_memory();
 
 	/* Add U-Boot */
 	uboot_start = (gd->start_addr_sp - uboot_stack_size) & ~EFI_PAGE_MASK;
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index f38e56cbe3..c4e5eb4691 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1163,7 +1163,6 @@ CONFIG_FSL_LAYERSCAPE
 CONFIG_FSL_LBC
 CONFIG_FSL_LINFLEXUART
 CONFIG_FSL_MC9SDZ60
-CONFIG_FSL_MC_ENET
 CONFIG_FSL_MEMAC
 CONFIG_FSL_NFC_CHIPS
 CONFIG_FSL_NFC_SPARE_SIZE
@@ -4976,7 +4975,6 @@ CONFIG_SYS_MCKR_VAL
 CONFIG_SYS_MCLINK_MAX
 CONFIG_SYS_MCMEM0_VAL
 CONFIG_SYS_MCMEM1_VAL
-CONFIG_SYS_MC_RSV_MEM_ALIGN
 CONFIG_SYS_MDC1_PIN
 CONFIG_SYS_MDCNFG_VAL
 CONFIG_SYS_MDC_PIN