cosmetic: s/BOARD_LATE_INIT/CONFIG_BOARD_LATE_INIT

This renames BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT.
Along the way it removes some leftover

 #define BOARD_LATE_INIT		1

and adds some basic documentation for board specific
callbacks in README.

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Stefano Babic <sbabic@denx.de>
This commit is contained in:
Helmut Raiger 2011-10-20 04:19:47 +00:00 committed by Wolfgang Denk
parent deb5ca8027
commit 9660e442de
34 changed files with 49 additions and 35 deletions

14
README
View File

@ -2447,6 +2447,20 @@ Modem Support:
See also: doc/README.Modem
Board initialization settings:
------------------------------
During Initialization u-boot calls a number of board specific functions
to allow the preparation of board specific prerequisites, e.g. pin setup
before drivers are initialized. To enable these callbacks the
following configuration macros have to be defined. Currently this is
architecture specific, so please check arch/your_architecture/lib/board.c
typically in board_init_f() and board_init_r().
- CONFIG_BOARD_EARLY_INIT_F: Call board_early_init_f()
- CONFIG_BOARD_EARLY_INIT_R: Call board_early_init_r()
- CONFIG_BOARD_LATE_INIT: Call board_late_init()
- CONFIG_BOARD_POSTCLK_INIT: Call board_postclk_init()
Configuration Settings:
-----------------------

View File

@ -590,7 +590,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
}
#endif
#ifdef BOARD_LATE_INIT
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init();
#endif

View File

@ -250,7 +250,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
/* enable exceptions */
enable_interrupts();
#ifdef BOARD_LATE_INIT
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init();
#endif

View File

@ -141,7 +141,7 @@ init_fnc_t *init_sequence[] =
stdio_init,
console_init_r,
interrupt_init,
#ifdef BOARD_LATE_INIT
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init,
#endif
#if defined(CONFIG_CMD_NET)

View File

@ -38,8 +38,8 @@
#include <asm/arch/sys_proto.h>
#include <netdev.h>
#ifndef BOARD_LATE_INIT
#error "BOARD_LATE_INIT must be set for this board"
#ifndef CONFIG_BOARD_LATE_INIT
#error "CONFIG_BOARD_LATE_INIT must be set for this board"
#endif
#ifndef CONFIG_BOARD_EARLY_INIT_F

View File

@ -409,7 +409,7 @@ int board_init(void)
return 0;
}
#ifdef BOARD_LATE_INIT
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_MXC_SPI

View File

@ -74,7 +74,7 @@ int board_early_init_f(void)
return 0;
}
#ifdef BOARD_LATE_INIT
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_S6E63D6

View File

@ -226,7 +226,7 @@ unsigned int addr_vall_arr[] = {
0xA03FE024, 0x00000000 /* USB */
};
#ifdef BOARD_LATE_INIT
#ifdef CONFIG_BOARD_LATE_INIT
#ifdef CONFIG_MMC
#define LDO_VAUX3_MASK 0x3
@ -351,7 +351,7 @@ int board_late_init(void)
return 0;
}
#endif /* BOARD_LATE_INIT */
#endif /* CONFIG_BOARD_LATE_INIT */
static void early_gpio_setup(struct gpio_register *gpio_reg, u32 bits)
{

View File

@ -76,7 +76,7 @@
#define CONFIG_CMD_BSP
#define CONFIG_CMD_NAND
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

View File

@ -36,7 +36,7 @@
*/
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_CERF250 1 /* on Cerf PXA Board */
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_BAUDRATE 38400
#define CONFIG_SYS_TEXT_BASE 0x0

View File

@ -28,7 +28,7 @@
#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */
#undef BOARD_LATE_INIT
#undef CONFIG_BOARD_LATE_INIT
#undef CONFIG_USE_IRQ
#undef CONFIG_SKIP_LOWLEVEL_INIT

View File

@ -79,7 +79,7 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
/*
* Hardware drivers

View File

@ -192,7 +192,7 @@
/* EET platform additions */
#ifdef CONFIG_IMX31_PHYCORE_EET
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO

View File

@ -51,7 +51,7 @@
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
/*
* Compressions

View File

@ -41,7 +41,7 @@
#define CONFIG_SHARP_LM8V31
#endif
#define CONFIG_MMC
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_TEXT_BASE 0x0
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

View File

@ -45,7 +45,7 @@
#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_BAUDRATE 38400
#define CONFIG_CONS_SCIF1 1
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_BOOTDELAY -1
#define CONFIG_BOOTARGS "console=ttySC0,38400"

View File

@ -45,7 +45,7 @@
/* #define _CONFIG_UART2 */ /* internal uart 2 */
/* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
#define USE_920T_MMU 1
#if 0

View File

@ -102,7 +102,7 @@
*/
#undef CONFIG_CMD_IMLS
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_BOOTDELAY 3

View File

@ -42,7 +42,7 @@
#define CONFIG_SYS_64BIT_VSPRINTF
#define CONFIG_BOARD_EARLY_INIT_F
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_REVISION_TAG

View File

@ -54,7 +54,7 @@
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
/*
* Hardware drivers

View File

@ -44,7 +44,7 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART

View File

@ -96,7 +96,7 @@
#define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024)
#define BOARD_LATE_INIT /* call board_late_init during start up */
#define CONFIG_BOARD_LATE_INIT /* call board_late_init during start up */
/* timing informazion */
#define CONFIG_SYS_HZ 1000 /* Mandatory... */

View File

@ -38,7 +38,7 @@
#define CONFIG_PLEB2 1 /* on an PLEB2 Board */
#undef CONFIG_LCD
#undef CONFIG_MMC
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_TEXT_BASE 0x0
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

View File

@ -64,7 +64,7 @@
#define CONFIG_MMC 1
#define CONFIG_DOS_PARTITION 1
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

View File

@ -135,7 +135,7 @@
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_SPI
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_BOOTDELAY 5

View File

@ -30,7 +30,7 @@
#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_SCIF1 1
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_BOOTDELAY -1
#define CONFIG_BOOTARGS "console=ttySC0,115200"

View File

@ -107,7 +107,7 @@
#define SH7757LCR_ETHERNET_MAC_BASE SH7757LCR_ETHERNET_MAC_BASE_SPI
#define SH7757LCR_ETHERNET_MAC_SIZE 17
#define SH7757LCR_ETHERNET_NUM_CH 2
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
/* Gigabit Ether */
#define SH7757LCR_GIGA_ETHERNET_NUM_CH 2

View File

@ -43,7 +43,7 @@
#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */
#define CONFIG_MMC 1
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_TEXT_BASE 0x0
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

View File

@ -137,7 +137,7 @@
#define CONFIG_FEC_MXC_PHYADDR 0x1f
#define CONFIG_MII
#define CONFIG_CMD_NET
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BOOTDELAY 5

View File

@ -35,7 +35,7 @@
#define CONFIG_SYS_HZ 1000 /* must be 1000 */
#define CONFIG_BOARD_EARLY_INIT_F
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
/*
* Size of malloc() pool

View File

@ -39,7 +39,7 @@
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MACH_TYPE MACH_TYPE_TTC_VISION2

View File

@ -45,7 +45,7 @@
#define CONFIG_SYS_TEXT_BASE 0x0
#define BOARD_LATE_INIT 1
#define CONFIG_BOARD_LATE_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

View File

@ -29,7 +29,7 @@
#define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */
#define CONFIG_SYS_TEXT_BASE 0x0
#undef BOARD_LATE_INIT
#undef CONFIG_BOARD_LATE_INIT
#undef CONFIG_USE_IRQ
#undef CONFIG_SKIP_LOWLEVEL_INIT

View File

@ -46,7 +46,7 @@
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define BOARD_LATE_INIT
#define CONFIG_BOARD_LATE_INIT
/*
* Compressions