Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:

Reverting became necessary after it turned out that the patches in
the u-boot-arm repo were modified, and in some cases corrupted.

This reverts the following commits:

	066bebd635
	7a837b7310
	c88ae20580
	a147e56f03
	d6674e0e2a
	8c8463cce4
	c98b47ad24
	8bf69d8178
	8c16cb0d3b
	a574a73852
	1377b5583a
	1704dc2091

Signed-off-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
Wolfgang Denk 2008-04-11 15:11:26 +02:00
parent aeff6d503b
commit 950a392464
58 changed files with 206 additions and 4020 deletions

View File

@ -490,7 +490,6 @@ LIST_ARM9=" \
davinci_dvevm \
davinci_schmoogie \
davinci_sonata \
pmdra \
"
#########################################################################
@ -508,9 +507,6 @@ LIST_ARM11=" \
cp1136 \
omap2420h4 \
apollon \
imx31_litekit \
imx31_phycore \
mx31ads \
"
#########################################################################

View File

@ -2385,9 +2385,6 @@ davinci_schmoogie_config : unconfig
davinci_sonata_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
pmdra_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs pmdra prodrive davinci
omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
@ -2598,23 +2595,14 @@ zylonite_config :
## ARM1136 Systems
#########################################################################
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
apollon_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
@$(MKCONFIG) $(@:_config=) arm arm1136 apollon
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
imx31_litekit_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
imx31_phycore_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
mx31ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31
#========================================================================
# i386
#========================================================================

View File

@ -1,50 +0,0 @@
#
# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := imx31_litekit.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#######################################################################
##
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend

View File

@ -1 +0,0 @@
TEXT_BASE = 0x87f00000

View File

@ -1,65 +0,0 @@
/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
int board_init(void)
{
__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
__REG(CSCR_L(0)) = 0xa0330d01;
__REG(CSCR_A(0)) = 0x00220800;
__REG(CSCR_U(4)) = 0x0000dcf6; /* CS4: Network Controller */
__REG(CSCR_L(4)) = 0x444a4541;
__REG(CSCR_A(4)) = 0x44443302;
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
gd->bd->bi_arch_number = 447; /* board id for linux */
gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
return 0;
}
int checkboard(void)
{
printf("Board: i.MX31 Litekit\n");
return 0;
}

View File

@ -1,103 +0,0 @@
/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <asm/arch/mx31-regs.h>
.macro REG reg, val
ldr r2, =\reg
ldr r3, =\val
str r3, [r2]
.endm
.macro REG8 reg, val
ldr r2, =\reg
ldr r3, =\val
strb r3, [r2]
.endm
.macro DELAY loops
ldr r2, =\loops
1:
subs r2, r2, #1
nop
bcs 1b
.endm
.globl lowlevel_init
lowlevel_init:
REG IPU_CONF, IPU_CONF_DI_EN
REG CCM_CCMR, 0x074B0BF5
DELAY 0x40000
REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE
REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
REG CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \
PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | \
PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | \
PDR0_MCU_PODF(0)
REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | \
PLL_MFN(0x23)
REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
REG 0x43FAC26C, 0 /* SDCLK */
REG 0x43FAC270, 0 /* CAS */
REG 0x43FAC274, 0 /* RAS */
REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */
REG 0x43FAC284, 0 /* DQM3 */
/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
REG 0x43FAC288, 0
REG 0x43FAC28C, 0
REG 0x43FAC290, 0
REG 0x43FAC294, 0
REG 0x43FAC298, 0
REG 0x43FAC29C, 0
REG 0x43FAC2A0, 0
REG 0x43FAC2A4, 0
REG 0x43FAC2A8, 0
REG 0x43FAC2AC, 0
REG 0x43FAC2B0, 0
REG 0x43FAC2B4, 0
REG 0x43FAC2B8, 0
REG 0x43FAC2BC, 0
REG 0x43FAC2C0, 0
REG 0x43FAC2C4, 0
REG 0x43FAC2C8, 0
REG 0x43FAC2CC, 0
REG 0x43FAC2D0, 0
REG 0x43FAC2D4, 0
REG 0x43FAC2D8, 0
REG 0x43FAC2DC, 0
REG 0xB8001010, 0x00000004
REG 0xB8001004, 0x006ac73a
REG 0xB8001000, 0x92100000
REG 0x80000f00, 0x12344321
REG 0xB8001000, 0xa2100000
REG 0x80000000, 0x12344321
REG 0x80000000, 0x12344321
REG 0xB8001000, 0xb2100000
REG8 0x80000033, 0xda
REG8 0x81000000, 0xff

View File

@ -1,59 +0,0 @@
/*
* January 2004 - Changed to support H4 device
* Copyright (c) 2004 Texas Instruments
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = 0x00000000;
. = ALIGN(4);
.text :
{
cpu/arm1136/start.o (.text)
*(.text)
}
. = ALIGN(4);
.rodata : { *(.rodata) }
. = ALIGN(4);
.data : { *(.data) }
. = ALIGN(4);
.got : { *(.got) }
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
_end = .;
}

View File

@ -1,49 +0,0 @@
#
# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := imx31_phycore.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend

View File

@ -1 +0,0 @@
TEXT_BASE = 0x87f00000

View File

@ -1,73 +0,0 @@
/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
int board_init(void)
{
__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
__REG(CSCR_L(0)) = 0x10000d03;
__REG(CSCR_A(0)) = 0x00720900;
__REG(CSCR_U(1)) = 0x0000df06; /* CS1: Network Controller */
__REG(CSCR_L(1)) = 0x444a4541;
__REG(CSCR_A(1)) = 0x44443302;
__REG(CSCR_U(4)) = 0x0000d843; /* CS4: SRAM */
__REG(CSCR_L(4)) = 0x22252521;
__REG(CSCR_A(4)) = 0x22220a00;
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
/* setup pins for I2C2 (for EEPROM, RTC) */
mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL);
mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SCL);
gd->bd->bi_arch_number = 447; /* board id for linux */
gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
return 0;
}
int checkboard(void)
{
printf("Board: Phytec phyCore i.MX31\n");
return 0;
}

View File

@ -1,105 +0,0 @@
/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <asm/arch/mx31-regs.h>
.macro REG reg, val
ldr r2, =\reg
ldr r3, =\val
str r3, [r2]
.endm
.macro REG8 reg, val
ldr r2, =\reg
ldr r3, =\val
strb r3, [r2]
.endm
.macro DELAY loops
ldr r2, =\loops
1:
subs r2, r2, #1
nop
bcs 1b
.endm
.globl lowlevel_init
lowlevel_init:
REG IPU_CONF, IPU_CONF_DI_EN
REG CCM_CCMR, 0x074B0BF5
DELAY 0x40000
REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE
REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
REG CCM_PDR0, PDR0_CSI_PODF(0xff1) | PDR0_PER_PODF(7) | \
PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | \
PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | \
PDR0_MCU_PODF(0)
REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0xe) | PLL_MFI(9) | PLL_MFN(0xd)
REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(0x43) | PLL_MFI(12) | PLL_MFN(1)
REG 0x43FAC26C, 0 /* SDCLK */
REG 0x43FAC270, 0 /* CAS */
REG 0x43FAC274, 0 /* RAS */
REG 0x43FAC27C, 0x1000 /* CS2 CSD0) */
REG 0x43FAC284, 0 /* DQM3 */
/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 0x288..0x2DC) */
REG 0x43FAC288, 0
REG 0x43FAC28C, 0
REG 0x43FAC290, 0
REG 0x43FAC294, 0
REG 0x43FAC298, 0
REG 0x43FAC29C, 0
REG 0x43FAC2A0, 0
REG 0x43FAC2A4, 0
REG 0x43FAC2A8, 0
REG 0x43FAC2AC, 0
REG 0x43FAC2B0, 0
REG 0x43FAC2B4, 0
REG 0x43FAC2B8, 0
REG 0x43FAC2BC, 0
REG 0x43FAC2C0, 0
REG 0x43FAC2C4, 0
REG 0x43FAC2C8, 0
REG 0x43FAC2CC, 0
REG 0x43FAC2D0, 0
REG 0x43FAC2D4, 0
REG 0x43FAC2D8, 0
REG 0x43FAC2DC, 0
REG 0xB8001010, 0x00000004
REG 0xB8001004, 0x006ac73a
REG 0xB8001000, 0x92100000
REG 0x80000f00, 0x12344321
REG 0xB8001000, 0xa2100000
REG 0x80000000, 0x12344321
REG 0x80000000, 0x12344321
REG 0xB8001000, 0xb2100000
REG8 0x80000033, 0xda
REG8 0x81000000, 0xff
REG 0xB8001000, 0x82226080
REG 0x80000000, 0xDEADBEEF

View File

@ -1,59 +0,0 @@
/*
* January 2004 - Changed to support H4 device
* Copyright (c) 2004 Texas Instruments
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = 0x00000000;
. = ALIGN(4);
.text :
{
cpu/arm1136/start.o (.text)
*(.text)
}
. = ALIGN(4);
.rodata : { *(.rodata) }
. = ALIGN(4);
.data : { *(.data) }
. = ALIGN(4);
.got : { *(.got) }
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
_end = .;
}

View File

@ -1,52 +0,0 @@
#
# (C) Copyright 2000-2008
# Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := mx31ads.o
SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

View File

@ -1 +0,0 @@
TEXT_BASE = 0x87f00000

View File

@ -1,288 +0,0 @@
/*
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <asm/arch/mx31-regs.h>
.macro REG reg, val
ldr r2, =\reg
ldr r3, =\val
str r3, [r2]
.endm
.macro REG8 reg, val
ldr r2, =\reg
ldr r3, =\val
strb r3, [r2]
.endm
.macro DELAY loops
ldr r2, =\loops
1:
subs r2, r2, #1
nop
bcs 1b
.endm
/* RedBoot: AIPS setup - Only setup MPROTx registers.
* The PACR default values are good.*/
.macro init_aips
/*
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
*/
ldr r0, =0x43F00000
ldr r1, =0x77777777
str r1, [r0, #0x00]
str r1, [r0, #0x04]
ldr r0, =0x53F00000
str r1, [r0, #0x00]
str r1, [r0, #0x04]
/*
* Clear the on and off peripheral modules Supervisor Protect bit
* for SDMA to access them. Did not change the AIPS control registers
* (offset 0x20) access type
*/
ldr r0, =0x43F00000
ldr r1, =0x0
str r1, [r0, #0x40]
str r1, [r0, #0x44]
str r1, [r0, #0x48]
str r1, [r0, #0x4C]
ldr r1, [r0, #0x50]
and r1, r1, #0x00FFFFFF
str r1, [r0, #0x50]
ldr r0, =0x53F00000
ldr r1, =0x0
str r1, [r0, #0x40]
str r1, [r0, #0x44]
str r1, [r0, #0x48]
str r1, [r0, #0x4C]
ldr r1, [r0, #0x50]
and r1, r1, #0x00FFFFFF
str r1, [r0, #0x50]
.endm /* init_aips */
/* RedBoot: MAX (Multi-Layer AHB Crossbar Switch) setup */
.macro init_max
ldr r0, =0x43F04000
/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
ldr r1, =0x00302154
str r1, [r0, #0x000] /* for S0 */
str r1, [r0, #0x100] /* for S1 */
str r1, [r0, #0x200] /* for S2 */
str r1, [r0, #0x300] /* for S3 */
str r1, [r0, #0x400] /* for S4 */
/* SGPCR - always park on last master */
ldr r1, =0x10
str r1, [r0, #0x010] /* for S0 */
str r1, [r0, #0x110] /* for S1 */
str r1, [r0, #0x210] /* for S2 */
str r1, [r0, #0x310] /* for S3 */
str r1, [r0, #0x410] /* for S4 */
/* MGPCR - restore default values */
ldr r1, =0x0
str r1, [r0, #0x800] /* for M0 */
str r1, [r0, #0x900] /* for M1 */
str r1, [r0, #0xA00] /* for M2 */
str r1, [r0, #0xB00] /* for M3 */
str r1, [r0, #0xC00] /* for M4 */
str r1, [r0, #0xD00] /* for M5 */
.endm /* init_max */
/* RedBoot: M3IF setup */
.macro init_m3if
/* Configure M3IF registers */
ldr r1, =0xB8003000
/*
* M3IF Control Register (M3IFCTL)
* MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
* MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
* MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
* MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
* MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
* MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
* MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
* MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
* ------------
* 0x00000040
*/
ldr r0, =0x00000040
str r0, [r1] /* M3IF control reg */
.endm /* init_m3if */
/* RedBoot: To support 133MHz DDR */
.macro init_drive_strength
/*
* Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits
* in SW_PAD_CTL registers
*/
/* SDCLK */
ldr r1, =0x43FAC200
ldr r0, [r1, #0x6C]
bic r0, r0, #(1 << 12)
str r0, [r1, #0x6C]
/* CAS */
ldr r0, [r1, #0x70]
bic r0, r0, #(1 << 22)
str r0, [r1, #0x70]
/* RAS */
ldr r0, [r1, #0x74]
bic r0, r0, #(1 << 2)
str r0, [r1, #0x74]
/* CS2 (CSD0) */
ldr r0, [r1, #0x7C]
bic r0, r0, #(1 << 22)
str r0, [r1, #0x7C]
/* DQM3 */
ldr r0, [r1, #0x84]
bic r0, r0, #(1 << 22)
str r0, [r1, #0x84]
/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */
ldr r2, =22 /* (0x2E0 - 0x288) / 4 = 22 */
pad_loop:
ldr r0, [r1, #0x88]
bic r0, r0, #(1 << 22)
bic r0, r0, #(1 << 12)
bic r0, r0, #(1 << 2)
str r0, [r1, #0x88]
add r1, r1, #4
subs r2, r2, #0x1
bne pad_loop
.endm /* init_drive_strength */
/* CPLD on CS4 setup */
.macro init_cs4
ldr r0, =WEIM_BASE
ldr r1, =0x0000D843
str r1, [r0, #0x40]
ldr r1, =0x22252521
str r1, [r0, #0x44]
ldr r1, =0x22220A00
str r1, [r0, #0x48]
.endm /* init_cs4 */
.globl lowlevel_init
lowlevel_init:
/* Redboot initializes very early AIPS, what for?
* Then it also initializes Multi-Layer AHB Crossbar Switch,
* M3IF */
/* Also setup the Peripheral Port Remap register inside the core */
ldr r0, =0x40000015 /* start from AIPS 2GB region */
mcr p15, 0, r0, c15, c2, 4
init_aips
init_max
init_m3if
init_drive_strength
init_cs4
/* Image Processing Unit: */
/* Too early to switch display on? */
/* Switch on Display Interface */
REG IPU_CONF, IPU_CONF_DI_EN
/* Clock Control Module: */
/* Use CKIH, MCU PLL off */
REG CCM_CCMR, 0x074B0BF5
DELAY 0x40000
/* MCU PLL on */
REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE
/* Switch to MCU PLL */
REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
/* PBC CPLD on CS4 */
mov r1, #CS4_BASE
ldrh r1, [r1, #0x2]
/* Is 27MHz switch set? */
ands r1, r1, #0x16
/* 532-133-66.5 */
ldr r0, =CCM_BASE
ldr r1, =0xFF871D58
/* PDR0 */
str r1, [r0, #0x4]
ldreq r1, MPCTL_PARAM_532
ldrne r1, MPCTL_PARAM_532_27
/* MPCTL */
str r1, [r0, #0x10]
/* Set UPLL=240MHz, USB=60MHz */
ldr r1, =0x49FCFE7F
/* PDR1 */
str r1, [r0, #0x8]
ldreq r1, UPCTL_PARAM_240
ldrne r1, UPCTL_PARAM_240_27
/* UPCTL */
str r1, [r0, #0x14]
/* default CLKO to 1/8 of the ARM core */
mov r1, #0x000002C0
add r1, r1, #0x00000006
/* COSR */
str r1, [r0, #0x1c]
/* RedBoot sets 0x1ff, 7, 3, 5, 1, 3, 0 */
/* REG CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \
PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | \
PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | \
PDR0_MCU_PODF(0)*/
/* Redboot: 0, 51, 10, 12 / 0, 14, 9, 13 */
/* REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | \
PLL_MFN(0x23)*/
/* Default: 1, 4, 12, 1 */
REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
/* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */
REG 0xB8001010, 0x00000004
REG 0xB8001004, 0x006ac73a
REG 0xB8001000, 0x92100000
REG 0x80000f00, 0x12344321
REG 0xB8001000, 0xa2100000
REG 0x80000000, 0x12344321
REG 0x80000000, 0x12344321
REG 0xB8001000, 0xb2100000
REG8 0x80000033, 0xda
REG8 0x81000000, 0xff
REG 0xB8001000, 0x82226080
REG 0x80000000, 0xDEADBEEF
REG 0xB8001010, 0x0000000c
mov pc, lr
MPCTL_PARAM_532:
.word (((1-1) << 26) + ((52-1) << 16) + (10 << 10) + (12 << 0))
MPCTL_PARAM_532_27:
.word (((1-1) << 26) + ((15-1) << 16) + (9 << 10) + (13 << 0))
UPCTL_PARAM_240:
.word (((2-1) << 26) + ((13-1) << 16) + (9 << 10) + (3 << 0))
UPCTL_PARAM_240_27:
.word (((2-1) << 26) + ((9 -1) << 16) + (8 << 10) + (8 << 0))

View File

@ -1,94 +0,0 @@
/*
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
int board_init(void)
{
int i;
#if 0
/* CS0: Nor Flash */
/*
* These are values from the RedBoot sources by Freescale. However,
* under U-Boot with this configuration 32-bit accesses don't work,
* lower 16 bits of data are read twice for each 32-bit read.
*/
__REG(CSCR_U(0)) = 0x23524E80;
__REG(CSCR_L(0)) = 0x10000D03; /* WRAP bit (1) is suspicious here, but
* disabling it doesn't help either */
__REG(CSCR_A(0)) = 0x00720900;
#endif
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
/* PBC setup */
/* Enable UART transceivers also reset the Ethernet/external UART */
readw(CS4_BASE + 4);
writew(0x8023, CS4_BASE + 4);
/* RedBoot also has an empty loop with 100000 iterations here -
* clock doesn't run yet */
for (i = 0; i < 100000; i++)
;
/* Clear the reset, toggle the LEDs */
writew(0xDF, CS4_BASE + 6);
/* clock still doesn't run */
for (i = 0; i < 100000; i++)
;
/* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */
readb(CS4_BASE + 8);
readb(CS4_BASE + 7);
readb(CS4_BASE + 8);
readb(CS4_BASE + 7);
gd->bd->bi_arch_number = 447; /* board id for linux */
gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */
return 0;
}
int checkboard(void)
{
printf("Board: MX31ADS\n");
return 0;
}

View File

@ -1,59 +0,0 @@
/*
* January 2004 - Changed to support H4 device
* Copyright (c) 2004 Texas Instruments
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = 0x00000000;
. = ALIGN(4);
.text :
{
cpu/arm1136/start.o (.text)
*(.text)
}
. = ALIGN(4);
.rodata : { *(.rodata) }
. = ALIGN(4);
.data : { *(.data) }
. = ALIGN(4);
.got : { *(.got) }
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
_end = .;
}

View File

@ -1,50 +0,0 @@
#
# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := pmdra.o
SOBJS := board_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak *~ .depend
#########################################################################
# This is for $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

View File

@ -1,29 +0,0 @@
/*
* Copyright (C) 2008 Prodrive B.V.
*
* Board-specific low level initialization code. Called at the very end
* of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
* initialization required.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
.globl dv_board_init
dv_board_init:
mov pc, lr

View File

@ -1,39 +0,0 @@
#
# (C) Copyright 2002
# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
#
# (C) Copyright 2003
# Texas Instruments, <www.ti.com>
# Swaminathan <swami.iyer@ti.com>
#
# Davinci EVM board (ARM925EJS) cpu
# see http://www.ti.com/ for more information on Texas Instruments
#
# Davinci EVM has 1 bank of 256 MB DDR RAM
# Physical Address:
# 8000'0000 to 9000'0000
#
# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
#
# Visioneering Corp. Sonata board (ARM926EJS) cpu
#
# Sonata board has 1 bank of 128 MB DDR RAM
# Physical Address:
# 8000'0000 to 8800'0000
#
# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
#
# Schmoogie board has 1 bank of 128 MB DDR RAM
# Physical Address:
# 8000'0000 to 8800'0000
#
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
#
# we load ourself to 8108 '0000
#
#
#Provide at least 16MB spacing between us and the Linux Kernel image
TEXT_BASE = 0x81080000

View File

@ -1,189 +0,0 @@
/*
* Copyright (C) 2008 Prodrive BV <pv@prodrive.nl>
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* Parts are shamelessly stolen from various TI sources, original copyright
* follows:
* ---------------------------------------------------------------------------
*
* Copyright (C) 2004 Texas Instruments.
*
* ---------------------------------------------------------------------------
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ---------------------------------------------------------------------------
*/
#include <common.h>
#include <i2c.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
#define MACH_TYPE_DAVINCI_EVM 901
DECLARE_GLOBAL_DATA_PTR;
extern void timer_init(void);
extern int eth_hw_init(void);
extern phy_t phy;
/* Works on Always On power domain only (no PD argument) */
void lpsc_on(unsigned int id)
{
dv_reg_p mdstat, mdctl;
if (id >= DAVINCI_LPSC_GEM)
return; /* Don't work on DSP Power Domain */
mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
while (REG(PSC_PTSTAT) & 0x01) {; }
if ((*mdstat & 0x1f) == 0x03)
return; /* Already on and enabled */
*mdctl |= 0x03;
/* Special treatment for some modules as for sprue14 p.7.4.2 */
if ((id == DAVINCI_LPSC_VPSSSLV) ||
(id == DAVINCI_LPSC_EMAC) ||
(id == DAVINCI_LPSC_EMAC_WRAPPER) ||
(id == DAVINCI_LPSC_MDIO) ||
(id == DAVINCI_LPSC_USB) ||
(id == DAVINCI_LPSC_ATA) ||
(id == DAVINCI_LPSC_VLYNQ) ||
(id == DAVINCI_LPSC_UHPI) ||
(id == DAVINCI_LPSC_DDR_EMIF) ||
(id == DAVINCI_LPSC_AEMIF) ||
(id == DAVINCI_LPSC_MMC_SD) ||
(id == DAVINCI_LPSC_MEMSTICK) ||
(id == DAVINCI_LPSC_McBSP) ||
(id == DAVINCI_LPSC_GPIO))
*mdctl |= 0x200;
REG(PSC_PTCMD) = 0x01;
while (REG(PSC_PTSTAT) & 0x03) {; }
while ((*mdstat & 0x1f) != 0x03) {; } /* Probably an overkill... */
}
void dsp_on(void)
{
int i;
if (REG(PSC_PDSTAT1) & 0x1f)
return; /* Already on */
REG(PSC_GBLCTL) |= 0x01;
REG(PSC_PDCTL1) |= 0x01;
REG(PSC_PDCTL1) &= ~0x100;
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
REG(PSC_PTCMD) = 0x02;
for (i = 0; i < 100; i++) {
if (REG(PSC_EPCPR) & 0x02)
break;
}
REG(PSC_CHP_SHRTSW) = 0x01;
REG(PSC_PDCTL1) |= 0x100;
REG(PSC_EPCCR) = 0x02;
for (i = 0; i < 100; i++) {
if (!(REG(PSC_PTSTAT) & 0x02))
break;
}
REG(PSC_GBLCTL) &= ~0x1f;
}
int board_init(void)
{
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
/* Workaround for TMS320DM6446 errata 1.3.22 */
REG(PSC_SILVER_BULLET) = 0;
/* Power on required peripherals */
lpsc_on(DAVINCI_LPSC_EMAC);
lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
lpsc_on(DAVINCI_LPSC_MDIO);
lpsc_on(DAVINCI_LPSC_I2C);
lpsc_on(DAVINCI_LPSC_UART0);
lpsc_on(DAVINCI_LPSC_UART2);
lpsc_on(DAVINCI_LPSC_TIMER1);
lpsc_on(DAVINCI_LPSC_GPIO);
/* Powerup the DSP */
dsp_on();
/* Bringup UART0 and 2 out of reset */
REG(UART0_PWREMU_MGMT) = 0x00006001;
REG(UART2_PWREMU_MGMT) = 0x00006001;
/* Enable GIO3.3V cells used for EMAC */
REG(VDD3P3V_PWDN) = 0;
/* Enable UART0 and 2 MUX lines */
REG(PINMUX1) |= 1;
REG(PINMUX1) |= 4;
/* Enable EMAC and AEMIF pins */
REG(PINMUX0) = 0x80000c1f;
/* Enable I2C pin Mux */
REG(PINMUX1) |= (1 << 7);
/* Set the Bus Priority Register to appropriate value */
REG(VBPR) = 0x20;
timer_init();
return(0);
}
int misc_init_r(void)
{
int clk = 0;
clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
printf("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27)/2);
printf("DDR Clock : %dMHz\n", (clk / 2));
if (!eth_hw_init())
printf("ethernet init failed!\n");
else
printf("ETH PHY : %s\n", phy.name);
return(0);
}
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return(0);
}

View File

@ -1,52 +0,0 @@
/*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = 0x00000000;
. = ALIGN(4);
.text :
{
cpu/arm926ejs/start.o (.text)
*(.text)
}
. = ALIGN(4);
.rodata : { *(.rodata) }
. = ALIGN(4);
.data : { *(.data) }
. = ALIGN(4);
.got : { *(.got) }
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
_end = .;
}

View File

@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o
COBJS = cpu.o
COBJS = interrupts.o cpu.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))

View File

@ -33,6 +33,9 @@
#include <common.h>
#include <command.h>
#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
#include <asm/arch/omap2420.h>
#endif
#ifdef CONFIG_USE_IRQ
DECLARE_GLOBAL_DATA_PTR;
@ -44,10 +47,10 @@ static unsigned long read_p15_c1 (void)
unsigned long value;
__asm__ __volatile__(
"mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
: "=r" (value)
:
: "memory");
"mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
: "=r" (value)
:
: "memory");
return value;
}

View File

@ -32,28 +32,31 @@
#include <common.h>
#include <asm/arch/bits.h>
#include <asm/arch/omap2420.h>
#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
# include <asm/arch/omap2420.h>
#endif
#define TIMER_LOAD_VAL 0
/* macro to read the 32 bit timer */
#define READ_TIMER (*((volatile ulong*)(CFG_TIMERBASE+TCRR)))
#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR))
#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
/* Use the IntegratorCP function from board/integratorcp.c */
#else
static ulong timestamp;
static ulong lastinc;
/*
* nothing really to do with interrupts, just starts up a counter.
*/
int interrupt_init(void)
/* nothing really to do with interrupts, just starts up a counter. */
int interrupt_init (void)
{
int32_t val;
/* Start the counter ticking up */
/* reload value on overflow*/
*((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;
/* mask to enable timer*/
val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0;
*((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/
val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/
*((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */
reset_timer_masked(); /* init the timestamp and lastinc value */
@ -63,99 +66,82 @@ int interrupt_init(void)
/*
* timer without interrupts
*/
void reset_timer(void)
void reset_timer (void)
{
reset_timer_masked();
reset_timer_masked ();
}
ulong get_timer(ulong base)
ulong get_timer (ulong base)
{
return get_timer_masked() - base;
return get_timer_masked () - base;
}
void set_timer(ulong t)
void set_timer (ulong t)
{
timestamp = t;
}
/* delay x useconds AND perserve advance timstamp value */
void udelay(unsigned long usec)
void udelay (unsigned long usec)
{
ulong tmo, tmp;
/* if "big" number, spread normalization to seconds */
if (usec >= 1000) {
/* start to normalize for usec to ticks per sec */
tmo = usec / 1000;
/* find number of "ticks" to wait to achieve target */
tmo *= CFG_HZ;
/* finish normalize. */
tmo /= 1000;
} else {
/* else small number, don't kill it prior to HZ multiply */
if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
tmo /= 1000; /* finish normalize. */
} else { /* else small number, don't kill it prior to HZ multiply */
tmo = usec * CFG_HZ;
tmo /= (1000*1000);
}
/* get current timestamp */
tmp = get_timer(0);
if ((tmo + tmp + 1) < tmp)
/* setting this forward will roll time stamp */
/* reset "advancing" timestamp to 0, set lastinc value */
reset_timer_masked();
tmp = get_timer (0); /* get current timestamp */
if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */
else
/* else, set advancing stamp wake up time */
tmo += tmp;
while (get_timer_masked() < tmo)/* loop till event */
tmo += tmp; /* else, set advancing stamp wake up time */
while (get_timer_masked () < tmo)/* loop till event */
/*NOP*/;
}
void reset_timer_masked(void)
void reset_timer_masked (void)
{
/* reset time */
/* capture current incrementer value time */
lastinc = READ_TIMER;
/* start "advancing" time stamp from 0 */
timestamp = 0;
lastinc = READ_TIMER; /* capture current incrementer value time */
timestamp = 0; /* start "advancing" time stamp from 0 */
}
ulong get_timer_masked(void)
ulong get_timer_masked (void)
{
ulong now = READ_TIMER; /* current tick value */
ulong now = READ_TIMER; /* current tick value */
/* normal mode (non roll) */
if (now >= lastinc)
/* move stamp forward with absolute diff ticks */
timestamp += (now - lastinc);
else
/* we have rollover of incrementer */
if (now >= lastinc) /* normal mode (non roll) */
timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */
else /* we have rollover of incrementer */
timestamp += (0xFFFFFFFF - lastinc) + now;
lastinc = now;
return timestamp;
}
/* waits specified delay value and resets timestamp */
void udelay_masked(unsigned long usec)
void udelay_masked (unsigned long usec)
{
ulong tmo;
ulong endtime;
signed long diff;
if (usec >= 1000) {
/* "big" number, spread normalization to seconds */
/* start to normalize for usec to ticks per sec */
tmo = usec / 1000;
/* find number of "ticks" to wait to achieve target */
tmo *= CFG_HZ;
tmo /= 1000;/* finish normalize. */
} else {
/* else small number, don't kill it prior to HZ multiply */
if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
tmo /= 1000; /* finish normalize. */
} else { /* else small number, don't kill it prior to HZ multiply */
tmo = usec * CFG_HZ;
tmo /= (1000*1000);
}
endtime = get_timer_masked() + tmo;
endtime = get_timer_masked () + tmo;
do {
ulong now = get_timer_masked();
ulong now = get_timer_masked ();
diff = endtime - now;
} while (diff >= 0);
}
@ -172,9 +158,10 @@ unsigned long long get_ticks(void)
* This function is derived from PowerPC code (timebase clock frequency).
* On ARM it returns the number of timer ticks per second.
*/
ulong get_tbclk(void)
ulong get_tbclk (void)
{
ulong tbclk;
tbclk = CFG_HZ;
return tbclk;
}
#endif /* !Integrator/CP */

View File

@ -1,44 +0,0 @@
#
# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
COBJS = interrupts.o serial.o generic.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#######################################################################
##
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend

View File

@ -1,99 +0,0 @@
/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/mx31-regs.h>
static u32 mx31_decode_pll(u32 reg, u32 infreq)
{
u32 mfi = (reg >> 10) & 0xf;
u32 mfn = reg & 0x3f;
u32 mfd = (reg >> 16) & 0x3f;
u32 pd = (reg >> 26) & 0xf;
mfi = mfi <= 5 ? 5 : mfi;
mfd += 1;
pd += 1;
return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) /
(mfd * pd)) << 10;
}
u32 mx31_get_mpl_dpdgck_clk(void)
{
u32 infreq;
if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
infreq = CONFIG_MX31_CLK32 * 1024;
else
infreq = CONFIG_MX31_HCLK_FREQ;
return mx31_decode_pll(__REG(CCM_MPCTL), infreq); }
u32 mx31_get_mcu_main_clk(void)
{
/* For now we assume mpl_dpdgck_clk == mcu_main_clk
* which should be correct for most boards
*/
return mx31_get_mpl_dpdgck_clk();
}
u32 mx31_get_ipg_clk(void)
{
u32 freq = mx31_get_mcu_main_clk();
u32 pdr0 = __REG(CCM_PDR0);
freq /= ((pdr0 >> 3) & 0x7) + 1;
freq /= ((pdr0 >> 6) & 0x3) + 1;
return freq;
}
void mx31_dump_clocks(void)
{
u32 cpufreq = mx31_get_mcu_main_clk();
printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000);
printf("ipg clock : %dHz\n", mx31_get_ipg_clk());
}
void mx31_gpio_mux(unsigned long mode)
{
unsigned long reg, shift, tmp;
reg = IOMUXC_BASE + (mode & 0xfc);
shift = (~mode & 0x3) * 8;
tmp = __REG(reg);
tmp &= ~(0xff << shift);
tmp |= ((mode >> 8) & 0xff) << shift;
__REG(reg) = tmp;
}
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
printf("CPU: Freescale i.MX31 at %d MHz\n",
mx31_get_mcu_main_clk() / 1000000);
return 0;
}
#endif

View File

@ -1,113 +0,0 @@
/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/mx31-regs.h>
#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
/* General purpose timers registers */
#define GPTCR __REG(TIMER_BASE) /* Control register */
#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */
#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */
#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
/* General purpose timers bitfields */
#define GPTCR_SWR (1<<15) /* Software reset */
#define GPTCR_FRR (1<<9) /* Freerun / restart */
#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */
#define GPTCR_TEN (1) /* Timer enable */
/*
* nothing really to do with interrupts, just starts up a counter.
*/
int interrupt_init(void)
{
int i;
/* setup GP Timer 1 */
GPTCR = GPTCR_SWR;
for (i = 0; i < 100; i++) GPTCR = 0; /* We have no udelay by now */
GPTPR = 0; /* 32Khz */
/* Freerun Mode, PERCLK1 input */
GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
return 0;
}
void reset_timer_masked(void)
{
GPTCR = 0;
/* Freerun Mode, PERCLK1 input*/
GPTCR = GPTCR_CLKSOURCE_32 | GPTCR_TEN;
}
ulong get_timer_masked(void)
{
ulong val = GPTCNT;
return val;
}
ulong get_timer(ulong base)
{
return get_timer_masked() - base;
}
void set_timer(ulong t)
{
}
/* delay x useconds AND perserve advance timstamp value */
void udelay(unsigned long usec)
{
ulong tmo, tmp;
if (usec >= 1000) {
/* "big" number, spread normalization to seconds */
/* start to normalize for usec to ticks per sec */
tmo = usec / 1000;
/* find number of "ticks" to wait to achieve target */
tmo *= CFG_HZ;
tmo /= 1000; /* finish normalize. */
} else {
/* else small number, don't kill it prior to HZ multiply */
tmo = usec * CFG_HZ;
tmo /= (1000*1000);
}
tmp = get_timer(0); /* get current timestamp */
if ((tmo + tmp + 1) < tmp)
/* setting this forward will roll time stamp */
/* reset "advancing" timestamp to 0, set lastinc value */
reset_timer_masked();
else
/* else, set advancing stamp wake up time */
tmo += tmp;
while (get_timer_masked() < tmo)/* loop till event */
/*NOP*/;
}
void reset_cpu(ulong addr)
{
__REG16(WDOG_BASE) = 4;
}

View File

@ -1,230 +0,0 @@
/*
* (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <common.h>
#if defined CONFIG_MX31_UART
#include <asm/arch/mx31.h>
#define __REG(x) (*((volatile u32 *)(x)))
#ifdef CFG_MX31_UART1
#define UART_PHYS 0x43f90000
#elif defined(CFG_MX31_UART2)
#define UART_PHYS 0x43f94000
#elif defined(CFG_MX31_UART3)
#define UART_PHYS 0x5000c000
#elif defined(CFG_MX31_UART4)
#define UART_PHYS 0x43fb0000
#elif defined(CFG_MX31_UART5)
#define UART_PHYS 0x43fb4000
#else
#error "define CFG_MX31_UARTx to use the mx31 UART driver"
#endif
/* Register definitions */
#define URXD 0x0 /* Receiver Register */
#define UTXD 0x40 /* Transmitter Register */
#define UCR1 0x80 /* Control Register 1 */
#define UCR2 0x84 /* Control Register 2 */
#define UCR3 0x88 /* Control Register 3 */
#define UCR4 0x8c /* Control Register 4 */
#define UFCR 0x90 /* FIFO Control Register */
#define USR1 0x94 /* Status Register 1 */
#define USR2 0x98 /* Status Register 2 */
#define UESC 0x9c /* Escape Character Register */
#define UTIM 0xa0 /* Escape Timer Register */
#define UBIR 0xa4 /* BRM Incremental Register */
#define UBMR 0xa8 /* BRM Modulator Register */
#define UBRC 0xac /* Baud Rate Count Register */
#define UTS 0xb4 /* UART Test Register (mx31) */
/* UART Control Register Bit Fields.*/
#define URXD_CHARRDY (1<<15)
#define URXD_ERR (1<<14)
#define URXD_OVRRUN (1<<13)
#define URXD_FRMERR (1<<12)
#define URXD_BRK (1<<11)
#define URXD_PRERR (1<<10)
#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
#define UCR1_IREN (1<<7) /* Infrared interface enable */
#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
#define UCR1_DOZE (1<<1) /* Doze */
#define UCR1_UARTEN (1<<0) /* UART enabled */
#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
#define UCR2_CTSC (1<<13) /* CTS pin control */
#define UCR2_CTS (1<<12) /* Clear to send */
#define UCR2_ESCEN (1<<11) /* Escape enable */
#define UCR2_PREN (1<<8) /* Parity enable */
#define UCR2_PROE (1<<7) /* Parity odd/even */
#define UCR2_STPB (1<<6) /* Stop */
#define UCR2_WS (1<<5) /* Word size */
#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
#define UCR2_TXEN (1<<2) /* Transmitter enabled */
#define UCR2_RXEN (1<<1) /* Receiver enabled */
#define UCR2_SRST (1<<0) /* SW reset */
#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
#define UCR3_PARERREN (1<<12) /* Parity enable */
#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
#define UCR3_DSR (1<<10) /* Data set ready */
#define UCR3_DCD (1<<9) /* Data carrier detect */
#define UCR3_RI (1<<8) /* Ring indicator */
#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
#define UCR4_INVR (1<<9) /* Inverted infrared reception */
#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
#define UCR4_IRSC (1<<5) /* IR special case */
#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
#define USR1_RTSS (1<<14) /* RTS pin status */
#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
#define USR1_RTSD (1<<12) /* RTS delta */
#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
#define USR2_IDLE (1<<12) /* Idle condition */
#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
#define USR2_WAKE (1<<7) /* Wake */
#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
#define USR2_TXDC (1<<3) /* Transmitter complete */
#define USR2_BRCD (1<<2) /* Break condition */
#define USR2_ORE (1<<1) /* Overrun error */
#define USR2_RDR (1<<0) /* Recv data ready */
#define UTS_FRCPERR (1<<13) /* Force parity error */
#define UTS_LOOP (1<<12) /* Loop tx and rx */
#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
#define UTS_TXFULL (1<<4) /* TxFIFO full */
#define UTS_RXFULL (1<<3) /* RxFIFO full */
#define UTS_SOFTRST (1<<0) /* Software reset */
DECLARE_GLOBAL_DATA_PTR;
void serial_setbrg(void)
{
u32 clk = mx31_get_ipg_clk();
if (!gd->baudrate)
gd->baudrate = CONFIG_BAUDRATE;
__REG(UART_PHYS + UFCR) = 4 << 7; /* divide input clock by 2 */
__REG(UART_PHYS + UBIR) = 0xf;
__REG(UART_PHYS + UBMR) = clk / (2 * gd->baudrate);
}
int serial_getc(void)
{
while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
return __REG(UART_PHYS + URXD);
}
void serial_putc(const char c)
{
__REG(UART_PHYS + UTXD) = c;
/* wait for transmitter to be ready */
while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY));
/* If \n, also do \r */
if (c == '\n')
serial_putc('\r');
}
/*
* Test whether a character is in the RX buffer */
int serial_tstc(void)
{
/* If receive fifo is empty, return false */
if (__REG(UART_PHYS + UTS) & UTS_RXEMPTY)
return 0;
return 1;
}
void serial_puts(const char *s)
{
while (*s) {
serial_putc(*s++);
}
}
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*
*/
int serial_init(void)
{
__REG(UART_PHYS + UCR1) = 0x0;
__REG(UART_PHYS + UCR2) = 0x0;
while (!(__REG(UART_PHYS + UCR2) & UCR2_SRST));
__REG(UART_PHYS + UCR3) = 0x0704;
__REG(UART_PHYS + UCR4) = 0x8000;
__REG(UART_PHYS + UESC) = 0x002b;
__REG(UART_PHYS + UTIM) = 0x0;
__REG(UART_PHYS + UTS) = 0x0;
serial_setbrg();
__REG(UART_PHYS + UCR2) = UCR2_WS | UCR2_IRTS | UCR2_RXEN | \
UCR2_TXEN | UCR2_SRST;
__REG(UART_PHYS + UCR1) = UCR1_UARTEN;
return 0;
}
#endif /* CONFIG_MX31 */

View File

@ -1,46 +0,0 @@
#
# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
COBJS = interrupts.o
SOBJS = start.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

View File

@ -1,42 +0,0 @@
/*
* armboot - Startup Code for OMP2420/ARM1136 CPU-core
*
* Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com>
*
* Copyright (c) 2001 Marius Gr??ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z??pke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <asm/arch/omap2420.h>
.globl reset_cpu
reset_cpu:
ldr r1, rstctl /* get addr for global reset reg */
mov r3, #0x2 /* full reset pll+mpu */
str r3, [r1] /* force reset */
mov r0, r0
_loop_forever:
b _loop_forever
rstctl:
.word PM_RSTCTRL_WKUP

View File

@ -30,6 +30,9 @@
#include <config.h>
#include <version.h>
#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
#include <asm/arch/omap2420.h>
#endif
.globl _start
_start: b reset
#ifdef CONFIG_ONENAND_IPL
@ -435,4 +438,22 @@ fiq:
arm1136_cache_flush:
mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
mov pc, lr @ back to caller
#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
/* Use the IntegratorCP function from board/integratorcp/platform.S */
#else
.align 5
.globl reset_cpu
reset_cpu:
ldr r1, rstctl /* get addr for global reset reg */
mov r3, #0x2 /* full reset pll+mpu */
str r3, [r1] /* force reset */
mov r0, r0
_loop_forever:
b _loop_forever
rstctl:
.word PM_RSTCTRL_WKUP
#endif
#endif /* CONFIG_ONENAND_IPL */

View File

@ -3,11 +3,6 @@
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* Copyright (C) 2008 Prodrive BV <pv@prodrive.nl>
* Changed:
* Made board specific defines such as DDR timing and PLL
* dividers. These should be set in the board config file
*
* Partially based on TI sources, original copyrights follow:
*/
@ -161,17 +156,17 @@ WaitPPL2Loop:
/* Program the PLL Multiplier */
ldr r6, PLL2_PLLM
mov r2, $CFG_DAVINCI_PLL2_PLLM
mov r2, $0x17 /* 162 MHz */
str r2, [r6]
/* Program the PLL2 Divisor Value */
ldr r6, PLL2_DIV2
mov r3, $CFG_DAVINCI_PLL2_DIV2
mov r3, $0x01
str r3, [r6]
/* Program the PLL2 Divisor Value */
ldr r6, PLL2_DIV1
mov r4, $CFG_DAVINCI_PLL2_DIV1
mov r4, $0x0b /* 54 MHz */
str r4, [r6]
/* PLL2 DIV2 MMR */
@ -278,7 +273,7 @@ checkDDRStatClkStop:
bne checkDDRStatClkStop
/*------------------------------------------------------*
* Program DDR2 MMRs *
* Program DDR2 MMRs for 162MHz Setting *
*------------------------------------------------------*/
/* Program PHY Control Register */
@ -293,12 +288,12 @@ checkDDRStatClkStop:
/* Program SDRAM TIM-0 Config Register */
ldr r6, SDTIM0
ldr r7, SDTIM0_VAL
ldr r7, SDTIM0_VAL_162MHz
str r7, [r6]
/* Program SDRAM TIM-1 Config Register */
ldr r6, SDTIM1
ldr r7, SDTIM1_VAL
ldr r7, SDTIM1_VAL_162MHz
str r7, [r6]
/* Program the SDRAM Bank Config Control Register */
@ -440,7 +435,7 @@ WaitLoop:
/* Program the PLL Multiplier */
ldr r6, PLL1_PLLM
mov r3, $CFG_DAVINCI_PLL1_PLLM
mov r3, $0x15 /* For 594MHz */
str r3, [r6]
/* Wait for PLL to Reset Properly */
@ -472,7 +467,7 @@ PLL1Lock:
nop
/*------------------------------------------------------*
* AEMIF configuration for NAND/NOR Flash *
* AEMIF configuration for NOR Flash (double check) *
*------------------------------------------------------*/
ldr r0, _PINMUX0
ldr r1, _DEV_SETTING
@ -484,12 +479,6 @@ PLL1Lock:
orr r2, r2, r1
str r2, [r0]
ldr r0, ACFG2
ldr r1, ACFG2_VAL
ldr r2, [r0]
and r1, r2, r1
str r1, [r0]
ldr r0, ACFG3
ldr r1, ACFG3_VAL
ldr r2, [r0]
@ -508,12 +497,6 @@ PLL1Lock:
and r1, r2, r1
str r1, [r0]
ldr r0, NANDFCR
ldr r1, NANDFCR_VAL
ldr r2, [r0]
and r1, r2, r1
str r1, [r0]
/*--------------------------------------*
* VTP manual Calibration *
*--------------------------------------*/
@ -577,36 +560,24 @@ _PINMUX1:
.word 0x01c40004 /* Device Configuration Registers */
_DEV_SETTING:
.word CFG_DAVINCI_PINMUX_0
.word 0x00000c1f
WAITCFG:
.word 0x01e00004
WAITCFG_VAL:
.word CFG_DAVINCI_WAITCFG
ACFG2:
.word 0x01e00010
ACFG2_VAL:
.word CFG_DAVINCI_ACFG2
.word 0
ACFG3:
.word 0x01e00014
ACFG3_VAL:
.word CFG_DAVINCI_ACFG3
.word 0x3ffffffd
ACFG4:
.word 0x01e00018
ACFG4_VAL:
.word CFG_DAVINCI_ACFG4
.word 0x3ffffffd
ACFG5:
.word 0x01e0001c
ACFG5_VAL:
.word CFG_DAVINCI_ACFG5
NANDFCR:
.word 0x01e00060
NANDFCR_VAL:
#ifdef CFG_DAVINCI_NANDCE
.word (1 << (CFG_DAVINCI_NANDCE - 2))
#else
.word 0x00000000
#endif
.word 0x3ffffffd
MDCTL_DDR2:
.word 0x01c41a34
@ -628,27 +599,33 @@ PSC_FLAG_CLEAR:
PSC_GEM_FLAG_CLEAR:
.word 0xfffffeff
/* DDR2 MMR & CONFIGURATION VALUES */
/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */
DDRCTL:
.word 0x200000e4
DDRCTL_VAL:
.word CFG_DAVINCI_DDRCTL
.word 0x50006405
SDREF:
.word 0x2000000c
SDREF_VAL:
.word CFG_DAVINCI_SDREF
.word 0x000005c3
SDCFG:
.word 0x20000008
SDCFG_VAL:
.word CFG_DAVINCI_SDCFG
#ifdef DDR_4BANKS
.word 0x00178622
#elif defined DDR_8BANKS
.word 0x00178632
#else
#error "Unknown DDR configuration!!!"
#endif
SDTIM0:
.word 0x20000010
SDTIM0_VAL:
.word CFG_DAVINCI_SDTIM0
SDTIM0_VAL_162MHz:
.word 0x28923211
SDTIM1:
.word 0x20000014
SDTIM1_VAL:
.word CFG_DAVINCI_SDTIM1
SDTIM1_VAL_162MHz:
.word 0x0016c722
VTPIOCR:
.word 0x200000f0 /* VTP IO Control register */
DDRVTPR:
@ -722,7 +699,7 @@ PLL2_DIV_MASK:
MMARG_BRF0:
.word 0x01c42010 /* BRF margin mode 0 (R/W)*/
MMARG_BRF0_VAL:
.word CFG_DAVINCI_MMARG_BRF0
.word 0x00444400
DDR2_START_ADDR:
.word 0x80000000

View File

@ -117,7 +117,7 @@ static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
dummy = emif_addr->NANDF3ECC;
dummy = emif_addr->NANDF4ECC;
emif_addr->NANDFCR |= (1 << (CFG_DAVINCI_NANDCE + 6));
emif_addr->NANDFCR |= (1 << 8);
}
static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region)
@ -147,7 +147,7 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
n = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1;
region = (CFG_DAVINCI_NANDCE - 1);
region = 1;
while (n--) {
tmp = nand_davinci_readecc(mtd, region);
*ecc_code++ = tmp;
@ -311,9 +311,40 @@ static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this, i
static void nand_flash_init(void)
{
/* All EMIF initialization is done in lowlevel_init.S
* and config values are in the board config files
*/
u_int32_t acfg1 = 0x3ffffffc;
u_int32_t acfg2 = 0x3ffffffc;
u_int32_t acfg3 = 0x3ffffffc;
u_int32_t acfg4 = 0x3ffffffc;
emifregs emif_regs;
/*------------------------------------------------------------------*
* NAND FLASH CHIP TIMEOUT @ 459 MHz *
* *
* AEMIF.CLK freq = PLL1/6 = 459/6 = 76.5 MHz *
* AEMIF.CLK period = 1/76.5 MHz = 13.1 ns *
* *
*------------------------------------------------------------------*/
acfg1 = 0
| (0 << 31 ) /* selectStrobe */
| (0 << 30 ) /* extWait */
| (1 << 26 ) /* writeSetup 10 ns */
| (3 << 20 ) /* writeStrobe 40 ns */
| (1 << 17 ) /* writeHold 10 ns */
| (1 << 13 ) /* readSetup 10 ns */
| (5 << 7 ) /* readStrobe 60 ns */
| (1 << 4 ) /* readHold 10 ns */
| (3 << 2 ) /* turnAround ?? ns */
| (0 << 0 ) /* asyncSize 8-bit bus */
;
emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
emif_regs->AWCCR |= 0x10000000;
emif_regs->AB1CR = acfg1; /* 0x08244128 */;
emif_regs->AB2CR = acfg2;
emif_regs->AB3CR = acfg3;
emif_regs->AB4CR = acfg4;
emif_regs->NANDFCR = 0x00000101;
}
int board_nand_init(struct nand_chip *nand)

View File

@ -42,9 +42,9 @@
typedef volatile struct {
u_int32_t pid12;
u_int32_t emumgt;
u_int32_t na1;
u_int32_t na2;
u_int32_t emumgt_clksped;
u_int32_t gpint_en;
u_int32_t gpdir_dat;
u_int32_t tim12;
u_int32_t tim34;
u_int32_t prd12;
@ -52,12 +52,21 @@ typedef volatile struct {
u_int32_t tcr;
u_int32_t tgcr;
u_int32_t wdtcr;
u_int32_t tlgc;
u_int32_t tlmr;
} davinci_timer;
davinci_timer *timer = (davinci_timer *)CFG_TIMERBASE;
#define TIMER_LOAD_VAL (CFG_HZ_CLOCK / CFG_HZ)
#define TIM_CLK_DIV 16
#define READ_TIMER timer->tim34
/*
* Timer runs with CFG_HZ_CLOCK, currently 27MHz. To avoid wrap
* around of timestamp already after min ~159s, divide it, e.g. by 16.
* timestamp will then wrap around all min ~42min
*/
#define DIV(x) ((x) >> 4)
static ulong timestamp;
static ulong lastinc;
@ -67,43 +76,25 @@ int timer_init(void)
/* We are using timer34 in unchained 32-bit mode, full speed */
timer->tcr = 0x0;
timer->tgcr = 0x0;
timer->tgcr = 0x06 | ((TIM_CLK_DIV - 1) << 8);
timer->tgcr = 0x06;
timer->tim34 = 0x0;
timer->prd34 = TIMER_LOAD_VAL;
lastinc = 0;
timer->tcr = 0x80 << 16;
timestamp = 0;
timer->tcr = 2 << 22;
return(0);
}
void reset_timer(void)
{
timer->tcr = 0x0;
timer->tim34 = 0;
lastinc = 0;
timestamp = 0;
timer->tcr = 2 << 22;
}
static ulong get_timer_raw(void)
{
ulong now = timer->tim34;
if (now >= lastinc) {
/* normal mode */
timestamp += now - lastinc;
} else {
/* overflow ... */
timestamp += now + TIMER_LOAD_VAL - lastinc;
}
lastinc = now;
return timestamp;
reset_timer_masked();
}
ulong get_timer(ulong base)
{
return((get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base); }
return(get_timer_masked() - base);
}
void set_timer(ulong t)
{
@ -111,6 +102,37 @@ void set_timer(ulong t)
}
void udelay(unsigned long usec)
{
udelay_masked(usec);
}
void reset_timer_masked(void)
{
lastinc = DIV(READ_TIMER);
timestamp = 0;
}
ulong get_timer_raw(void)
{
ulong now = DIV(READ_TIMER);
if (now >= lastinc) {
/* normal mode */
timestamp += now - lastinc;
} else {
/* overflow ... */
timestamp += now + DIV(TIMER_LOAD_VAL) - lastinc;
}
lastinc = now;
return timestamp;
}
ulong get_timer_masked(void)
{
return(get_timer_raw() / DIV(TIMER_LOAD_VAL));
}
void udelay_masked(unsigned long usec)
{
ulong tmo;
ulong endtime;
@ -118,7 +140,7 @@ void udelay(unsigned long usec)
tmo = CFG_HZ_CLOCK / 1000;
tmo *= usec;
tmo /= (1000 * TIM_CLK_DIV);
tmo /= 1000;
endtime = get_timer_raw() + tmo;
@ -143,5 +165,8 @@ unsigned long long get_ticks(void)
*/
ulong get_tbclk(void)
{
return CFG_HZ;
ulong tbclk;
tbclk = CFG_HZ;
return(tbclk);
}

View File

@ -29,7 +29,6 @@ COBJS-y += fsl_i2c.o
COBJS-y += omap1510_i2c.o
COBJS-y += omap24xx_i2c.o
COBJS-y += tsi108_i2c.o
COBJS-y += mxc_i2c.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)

View File

@ -1,207 +0,0 @@
/*
* i2c driver for Freescale mx31
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if defined(CONFIG_HARD_I2C) && defined(CONFIG_I2C_MXC)
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
#define IADR 0x00
#define IFDR 0x04
#define I2CR 0x08
#define I2SR 0x0c
#define I2DR 0x10
#define I2CR_IEN (1 << 7)
#define I2CR_IIEN (1 << 6)
#define I2CR_MSTA (1 << 5)
#define I2CR_MTX (1 << 4)
#define I2CR_TX_NO_AK (1 << 3)
#define I2CR_RSTA (1 << 2)
#define I2SR_ICF (1 << 7)
#define I2SR_IBB (1 << 5)
#define I2SR_IIF (1 << 1)
#define I2SR_RX_NO_AK (1 << 0)
#ifdef CFG_I2C_MX31_PORT1
#define I2C_BASE 0x43f80000
#elif defined(CFG_I2C_MX31_PORT2)
#define I2C_BASE 0x43f98000
#elif defined(CFG_I2C_MX31_PORT3)
#define I2C_BASE 0x43f84000
#else
#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver"
#endif
#ifdef DEBUG
#define DPRINTF(args...) printf(args)
#else
#define DPRINTF(args...)
#endif
static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960,
1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840};
void i2c_init(int speed, int unused)
{
int freq = mx31_get_ipg_clk();
int i;
for (i = 0; i < 0x1f; i++)
if (freq / div[i] <= speed)
break;
DPRINTF("%s: speed: %d\n", __FUNCTION__, speed);
__REG16(I2C_BASE + I2CR) = 0; /* Reset module */
__REG16(I2C_BASE + IFDR) = i;
__REG16(I2C_BASE + I2CR) = I2CR_IEN;
__REG16(I2C_BASE + I2SR) = 0;
}
static int wait_busy(void)
{
int timeout = 10000;
while (!(__REG16(I2C_BASE + I2SR) & I2SR_IIF) && --timeout)
udelay(1);
__REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
return timeout;
}
static int tx_byte(u8 byte)
{
__REG16(I2C_BASE + I2DR) = byte;
if (!wait_busy() || __REG16(I2C_BASE + I2SR) & I2SR_RX_NO_AK)
return -1;
return 0;
}
static int rx_byte(void)
{
if (!wait_busy())
return -1;
return __REG16(I2C_BASE + I2DR);
}
int i2c_probe(uchar chip)
{
int ret;
__REG16(I2C_BASE + I2CR) = 0; /* Reset module */
__REG16(I2C_BASE + I2CR) = I2CR_IEN;
__REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX;
ret = tx_byte(chip << 1);
__REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MTX;
return ret;
}
static int i2c_addr(uchar chip, uint addr, int alen)
{
__REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
__REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX;
if (tx_byte(chip << 1))
return -1;
while (alen--)
if (tx_byte((addr >> (alen * 8)) & 0xff))
return -1;
return 0;
}
int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
{
int timeout = 10000;
int ret;
DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: +%d\n", \
__FUNCTION__, chip, addr, alen, len);
if (i2c_addr(chip, addr, alen)) {
printf("i2c_addr failed\n");
return -1;
}
__REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | \
I2CR_MTX | I2CR_RSTA;
if (tx_byte(chip << 1 | 1))
return -1;
__REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | ((len == 1) \
? I2CR_TX_NO_AK : 0);
ret = __REG16(I2C_BASE + I2DR);
while (len--) {
if ((ret = rx_byte()) < 0)
return -1;
*buf++ = ret;
if (len <= 1)
__REG16(I2C_BASE + I2CR) = I2CR_IEN | \
I2CR_MSTA | I2CR_TX_NO_AK;
}
wait_busy();
__REG16(I2C_BASE + I2CR) = I2CR_IEN;
while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
udelay(1);
return 0;
}
int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
{
int timeout = 10000;
DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n", \
__FUNCTION__, chip, addr, alen, len);
if (i2c_addr(chip, addr, alen))
return -1;
while (len--)
if (tx_byte(*buf++))
return -1;
__REG16(I2C_BASE + I2CR) = I2CR_IEN;
while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
udelay(1);
return 0;
}
#endif /* CONFIG_HARD_I2C */

View File

@ -55,7 +55,6 @@ COBJS-y += rtl8139.o
COBJS-y += rtl8169.o
COBJS-y += s3c4510b_eth.o
COBJS-y += smc91111.o
COBJS-y += smc911x.o
COBJS-y += tigon3.o
COBJS-y += tsec.o
COBJS-y += tsi108_eth.o

View File

@ -1,680 +0,0 @@
/*
* SMSC LAN9[12]1[567] Network driver
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#ifdef CONFIG_DRIVER_SMC911X
#include <command.h>
#include <net.h>
#include <miiphy.h>
#define mdelay(n) udelay((n)*1000)
#define __REG(x) (*((volatile u32 *)(x)))
/* Below are the register offsets and bit definitions
* of the Lan911x memory space
*/
#define RX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00)
#define TX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20)
#define TX_CMD_A_INT_ON_COMP (0x80000000)
#define TX_CMD_A_INT_BUF_END_ALGN (0x03000000)
#define TX_CMD_A_INT_4_BYTE_ALGN (0x00000000)
#define TX_CMD_A_INT_16_BYTE_ALGN (0x01000000)
#define TX_CMD_A_INT_32_BYTE_ALGN (0x02000000)
#define TX_CMD_A_INT_DATA_OFFSET (0x001F0000)
#define TX_CMD_A_INT_FIRST_SEG (0x00002000)
#define TX_CMD_A_INT_LAST_SEG (0x00001000)
#define TX_CMD_A_BUF_SIZE (0x000007FF)
#define TX_CMD_B_PKT_TAG (0xFFFF0000)
#define TX_CMD_B_ADD_CRC_DISABLE (0x00002000)
#define TX_CMD_B_DISABLE_PADDING (0x00001000)
#define TX_CMD_B_PKT_BYTE_LENGTH (0x000007FF)
#define RX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x40)
#define RX_STS_PKT_LEN (0x3FFF0000)
#define RX_STS_ES (0x00008000)
#define RX_STS_BCST (0x00002000)
#define RX_STS_LEN_ERR (0x00001000)
#define RX_STS_RUNT_ERR (0x00000800)
#define RX_STS_MCAST (0x00000400)
#define RX_STS_TOO_LONG (0x00000080)
#define RX_STS_COLL (0x00000040)
#define RX_STS_ETH_TYPE (0x00000020)
#define RX_STS_WDOG_TMT (0x00000010)
#define RX_STS_MII_ERR (0x00000008)
#define RX_STS_DRIBBLING (0x00000004)
#define RX_STS_CRC_ERR (0x00000002)
#define RX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x44)
#define TX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x48)
#define TX_STS_TAG (0xFFFF0000)
#define TX_STS_ES (0x00008000)
#define TX_STS_LOC (0x00000800)
#define TX_STS_NO_CARR (0x00000400)
#define TX_STS_LATE_COLL (0x00000200)
#define TX_STS_MANY_COLL (0x00000100)
#define TX_STS_COLL_CNT (0x00000078)
#define TX_STS_MANY_DEFER (0x00000004)
#define TX_STS_UNDERRUN (0x00000002)
#define TX_STS_DEFERRED (0x00000001)
#define TX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C)
#define ID_REV __REG(CONFIG_DRIVER_SMC911X_BASE + 0x50)
#define ID_REV_CHIP_ID (0xFFFF0000) /* RO */
#define ID_REV_REV_ID (0x0000FFFF) /* RO */
#define INT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x54)
#define INT_CFG_INT_DEAS (0xFF000000) /* R/W */
#define INT_CFG_INT_DEAS_CLR (0x00004000)
#define INT_CFG_INT_DEAS_STS (0x00002000)
#define INT_CFG_IRQ_INT (0x00001000) /* RO */
#define INT_CFG_IRQ_EN (0x00000100) /* R/W */
#define INT_CFG_IRQ_POL (0x00000010) /* R/W */
/* Not Affected by SW Reset */
#define INT_CFG_IRQ_TYPE (0x00000001) /* R/W */
/* Not Affected by SW Reset */
#define INT_STS __REG(CONFIG_DRIVER_SMC911X_BASE + 0x58)
#define INT_STS_SW_INT (0x80000000) /* R/WC */
#define INT_STS_TXSTOP_INT (0x02000000) /* R/WC */
#define INT_STS_RXSTOP_INT (0x01000000) /* R/WC */
#define INT_STS_RXDFH_INT (0x00800000) /* R/WC */
#define INT_STS_RXDF_INT (0x00400000) /* R/WC */
#define INT_STS_TX_IOC (0x00200000) /* R/WC */
#define INT_STS_RXD_INT (0x00100000) /* R/WC */
#define INT_STS_GPT_INT (0x00080000) /* R/WC */
#define INT_STS_PHY_INT (0x00040000) /* RO */
#define INT_STS_PME_INT (0x00020000) /* R/WC */
#define INT_STS_TXSO (0x00010000) /* R/WC */
#define INT_STS_RWT (0x00008000) /* R/WC */
#define INT_STS_RXE (0x00004000) /* R/WC */
#define INT_STS_TXE (0x00002000) /* R/WC */
/*#define INT_STS_ERX (0x00001000)*/ /* R/WC */
#define INT_STS_TDFU (0x00000800) /* R/WC */
#define INT_STS_TDFO (0x00000400) /* R/WC */
#define INT_STS_TDFA (0x00000200) /* R/WC */
#define INT_STS_TSFF (0x00000100) /* R/WC */
#define INT_STS_TSFL (0x00000080) /* R/WC */
/*#define INT_STS_RXDF (0x00000040)*/ /* R/WC */
#define INT_STS_RDFO (0x00000040) /* R/WC */
#define INT_STS_RDFL (0x00000020) /* R/WC */
#define INT_STS_RSFF (0x00000010) /* R/WC */
#define INT_STS_RSFL (0x00000008) /* R/WC */
#define INT_STS_GPIO2_INT (0x00000004) /* R/WC */
#define INT_STS_GPIO1_INT (0x00000002) /* R/WC */
#define INT_STS_GPIO0_INT (0x00000001) /* R/WC */
#define INT_EN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C)
#define INT_EN_SW_INT_EN (0x80000000) /* R/W */
#define INT_EN_TXSTOP_INT_EN (0x02000000) /* R/W */
#define INT_EN_RXSTOP_INT_EN (0x01000000) /* R/W */
#define INT_EN_RXDFH_INT_EN (0x00800000) /* R/W */
/*#define INT_EN_RXDF_INT_EN (0x00400000)*/ /* R/W */
#define INT_EN_TIOC_INT_EN (0x00200000) /* R/W */
#define INT_EN_RXD_INT_EN (0x00100000) /* R/W */
#define INT_EN_GPT_INT_EN (0x00080000) /* R/W */
#define INT_EN_PHY_INT_EN (0x00040000) /* R/W */
#define INT_EN_PME_INT_EN (0x00020000) /* R/W */
#define INT_EN_TXSO_EN (0x00010000) /* R/W */
#define INT_EN_RWT_EN (0x00008000) /* R/W */
#define INT_EN_RXE_EN (0x00004000) /* R/W */
#define INT_EN_TXE_EN (0x00002000) /* R/W */
/*#define INT_EN_ERX_EN (0x00001000)*/ /* R/W */
#define INT_EN_TDFU_EN (0x00000800) /* R/W */
#define INT_EN_TDFO_EN (0x00000400) /* R/W */
#define INT_EN_TDFA_EN (0x00000200) /* R/W */
#define INT_EN_TSFF_EN (0x00000100) /* R/W */
#define INT_EN_TSFL_EN (0x00000080) /* R/W */
/*#define INT_EN_RXDF_EN (0x00000040)*/ /* R/W */
#define INT_EN_RDFO_EN (0x00000040) /* R/W */
#define INT_EN_RDFL_EN (0x00000020) /* R/W */
#define INT_EN_RSFF_EN (0x00000010) /* R/W */
#define INT_EN_RSFL_EN (0x00000008) /* R/W */
#define INT_EN_GPIO2_INT (0x00000004) /* R/W */
#define INT_EN_GPIO1_INT (0x00000002) /* R/W */
#define INT_EN_GPIO0_INT (0x00000001) /* R/W */
#define BYTE_TEST __REG(CONFIG_DRIVER_SMC911X_BASE + 0x64)
#define FIFO_INT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x68)
#define FIFO_INT_TX_AVAIL_LEVEL (0xFF000000) /* R/W */
#define FIFO_INT_TX_STS_LEVEL (0x00FF0000) /* R/W */
#define FIFO_INT_RX_AVAIL_LEVEL (0x0000FF00) /* R/W */
#define FIFO_INT_RX_STS_LEVEL (0x000000FF) /* R/W */
#define RX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C)
#define RX_CFG_RX_END_ALGN (0xC0000000) /* R/W */
#define RX_CFG_RX_END_ALGN4 (0x00000000) /* R/W */
#define RX_CFG_RX_END_ALGN16 (0x40000000) /* R/W */
#define RX_CFG_RX_END_ALGN32 (0x80000000) /* R/W */
#define RX_CFG_RX_DMA_CNT (0x0FFF0000) /* R/W */
#define RX_CFG_RX_DUMP (0x00008000) /* R/W */
#define RX_CFG_RXDOFF (0x00001F00) /* R/W */
/*#define RX_CFG_RXBAD (0x00000001)*/ /* R/W */
#define TX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x70)
/*#define TX_CFG_TX_DMA_LVL (0xE0000000)*/ /* R/W */
/*#define TX_CFG_TX_DMA_CNT (0x0FFF0000)*/ /* R/W */
/* Self Clearing */
#define TX_CFG_TXS_DUMP (0x00008000)
/* Self Clearing */
#define TX_CFG_TXD_DUMP (0x00004000)
/* Self Clearing */
#define TX_CFG_TXSAO (0x00000004) /* R/W */
#define TX_CFG_TX_ON (0x00000002) /* R/W */
#define TX_CFG_STOP_TX (0x00000001)
/* Self Clearing */
#define HW_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x74)
#define HW_CFG_TTM (0x00200000) /* R/W */
#define HW_CFG_SF (0x00100000) /* R/W */
#define HW_CFG_TX_FIF_SZ (0x000F0000) /* R/W */
#define HW_CFG_TR (0x00003000) /* R/W */
#define HW_CFG_PHY_CLK_SEL (0x00000060) /* R/W */
#define HW_CFG_PHY_CLK_SEL_INT_PHY (0x00000000) /* R/W */
#define HW_CFG_PHY_CLK_SEL_EXT_PHY (0x00000020) /* R/W */
#define HW_CFG_PHY_CLK_SEL_CLK_DIS (0x00000040) /* R/W */
#define HW_CFG_SMI_SEL (0x00000010) /* R/W */
#define HW_CFG_EXT_PHY_DET (0x00000008) /* RO */
#define HW_CFG_EXT_PHY_EN (0x00000004) /* R/W */
#define HW_CFG_32_16_BIT_MODE (0x00000004) /* RO */
#define HW_CFG_SRST_TO (0x00000002) /* RO */
#define HW_CFG_SRST (0x00000001)
/* Self Clearing */
#define RX_DP_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x78)
#define RX_DP_CTRL_RX_FFWD (0x80000000) /* R/W */
#define RX_DP_CTRL_FFWD_BUSY (0x80000000) /* RO */
#define RX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C)
#define RX_FIFO_INF_RXSUSED (0x00FF0000) /* RO */
#define RX_FIFO_INF_RXDUSED (0x0000FFFF) /* RO */
#define TX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x80)
#define TX_FIFO_INF_TSUSED (0x00FF0000) /* RO */
#define TX_FIFO_INF_TDFREE (0x0000FFFF) /* RO */
#define PMT_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x84)
#define PMT_CTRL_PM_MODE (0x00003000)
/* Self Clearing */
#define PMT_CTRL_PHY_RST (0x00000400)
/* Self Clearing */
#define PMT_CTRL_WOL_EN (0x00000200) /* R/W */
#define PMT_CTRL_ED_EN (0x00000100) /* R/W */
#define PMT_CTRL_PME_TYPE (0x00000040) /* R/W */
/* Not Affected by SW Reset */
#define PMT_CTRL_WUPS (0x00000030) /* R/WC */
#define PMT_CTRL_WUPS_NOWAKE (0x00000000) /* R/WC */
#define PMT_CTRL_WUPS_ED (0x00000010) /* R/WC */
#define PMT_CTRL_WUPS_WOL (0x00000020) /* R/WC */
#define PMT_CTRL_WUPS_MULTI (0x00000030) /* R/WC */
#define PMT_CTRL_PME_IND (0x00000008) /* R/W */
#define PMT_CTRL_PME_POL (0x00000004) /* R/W */
#define PMT_CTRL_PME_EN (0x00000002) /* R/W */
/* Not Affected by SW Reset */
#define PMT_CTRL_READY (0x00000001) /* RO */
#define GPIO_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x88)
#define GPIO_CFG_LED3_EN (0x40000000) /* R/W */
#define GPIO_CFG_LED2_EN (0x20000000) /* R/W */
#define GPIO_CFG_LED1_EN (0x10000000) /* R/W */
#define GPIO_CFG_GPIO2_INT_POL (0x04000000) /* R/W */
#define GPIO_CFG_GPIO1_INT_POL (0x02000000) /* R/W */
#define GPIO_CFG_GPIO0_INT_POL (0x01000000) /* R/W */
#define GPIO_CFG_EEPR_EN (0x00700000) /* R/W */
#define GPIO_CFG_GPIOBUF2 (0x00040000) /* R/W */
#define GPIO_CFG_GPIOBUF1 (0x00020000) /* R/W */
#define GPIO_CFG_GPIOBUF0 (0x00010000) /* R/W */
#define GPIO_CFG_GPIODIR2 (0x00000400) /* R/W */
#define GPIO_CFG_GPIODIR1 (0x00000200) /* R/W */
#define GPIO_CFG_GPIODIR0 (0x00000100) /* R/W */
#define GPIO_CFG_GPIOD4 (0x00000010) /* R/W */
#define GPIO_CFG_GPIOD3 (0x00000008) /* R/W */
#define GPIO_CFG_GPIOD2 (0x00000004) /* R/W */
#define GPIO_CFG_GPIOD1 (0x00000002) /* R/W */
#define GPIO_CFG_GPIOD0 (0x00000001) /* R/W */
#define GPT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C)
#define GPT_CFG_TIMER_EN (0x20000000) /* R/W */
#define GPT_CFG_GPT_LOAD (0x0000FFFF) /* R/W */
#define GPT_CNT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x90)
#define GPT_CNT_GPT_CNT (0x0000FFFF) /* RO */
#define ENDIAN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x98)
#define FREE_RUN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C)
#define RX_DROP __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0)
#define MAC_CSR_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4)
#define MAC_CSR_CMD_CSR_BUSY (0x80000000)
/* Self Clearing */
#define MAC_CSR_CMD_R_NOT_W (0x40000000) /* R/W */
#define MAC_CSR_CMD_CSR_ADDR (0x000000FF) /* R/W */
#define MAC_CSR_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8)
#define AFC_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC)
#define AFC_CFG_AFC_HI (0x00FF0000) /* R/W */
#define AFC_CFG_AFC_LO (0x0000FF00) /* R/W */
#define AFC_CFG_BACK_DUR (0x000000F0) /* R/W */
#define AFC_CFG_FCMULT (0x00000008) /* R/W */
#define AFC_CFG_FCBRD (0x00000004) /* R/W */
#define AFC_CFG_FCADD (0x00000002) /* R/W */
#define AFC_CFG_FCANY (0x00000001) /* R/W */
#define E2P_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0)
#define E2P_CMD_EPC_BUSY (0x80000000)
/* Self Clearing */
#define E2P_CMD_EPC_CMD (0x70000000) /* R/W */
#define E2P_CMD_EPC_CMD_READ (0x00000000) /* R/W */
#define E2P_CMD_EPC_CMD_EWDS (0x10000000) /* R/W */
#define E2P_CMD_EPC_CMD_EWEN (0x20000000) /* R/W */
#define E2P_CMD_EPC_CMD_WRITE (0x30000000) /* R/W */
#define E2P_CMD_EPC_CMD_WRAL (0x40000000) /* R/W */
#define E2P_CMD_EPC_CMD_ERASE (0x50000000) /* R/W */
#define E2P_CMD_EPC_CMD_ERAL (0x60000000) /* R/W */
#define E2P_CMD_EPC_CMD_RELOAD (0x70000000) /* R/W */
#define E2P_CMD_EPC_TIMEOUT (0x00000200) /* RO */
#define E2P_CMD_MAC_ADDR_LOADED (0x00000100) /* RO */
#define E2P_CMD_EPC_ADDR (0x000000FF) /* R/W */
#define E2P_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4)
#define E2P_DATA_EEPROM_DATA (0x000000FF) /* R/W */
/* end of LAN register offsets and bit definitions */
/* MAC Control and Status registers */
#define MAC_CR (0x01) /* R/W */
/* MAC_CR - MAC Control Register */
#define MAC_CR_RXALL (0x80000000)
/* TODO: delete this bit? It is not described in the data sheet. */
#define MAC_CR_HBDIS (0x10000000)
#define MAC_CR_RCVOWN (0x00800000)
#define MAC_CR_LOOPBK (0x00200000)
#define MAC_CR_FDPX (0x00100000)
#define MAC_CR_MCPAS (0x00080000)
#define MAC_CR_PRMS (0x00040000)
#define MAC_CR_INVFILT (0x00020000)
#define MAC_CR_PASSBAD (0x00010000)
#define MAC_CR_HFILT (0x00008000)
#define MAC_CR_HPFILT (0x00002000)
#define MAC_CR_LCOLL (0x00001000)
#define MAC_CR_BCAST (0x00000800)
#define MAC_CR_DISRTY (0x00000400)
#define MAC_CR_PADSTR (0x00000100)
#define MAC_CR_BOLMT_MASK (0x000000C0)
#define MAC_CR_DFCHK (0x00000020)
#define MAC_CR_TXEN (0x00000008)
#define MAC_CR_RXEN (0x00000004)
#define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */
#define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */
#define HASHH (0x04) /* R/W */
#define HASHL (0x05) /* R/W */
#define MII_ACC (0x06) /* R/W */
#define MII_ACC_PHY_ADDR (0x0000F800)
#define MII_ACC_MIIRINDA (0x000007C0)
#define MII_ACC_MII_WRITE (0x00000002)
#define MII_ACC_MII_BUSY (0x00000001)
#define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */
#define FLOW (0x08) /* R/W */
#define FLOW_FCPT (0xFFFF0000)
#define FLOW_FCPASS (0x00000004)
#define FLOW_FCEN (0x00000002)
#define FLOW_FCBSY (0x00000001)
#define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */
#define VLAN1_VTI1 (0x0000ffff)
#define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */
#define VLAN2_VTI2 (0x0000ffff)
#define WUFF (0x0B) /* WO */
#define WUCSR (0x0C) /* R/W */
#define WUCSR_GUE (0x00000200)
#define WUCSR_WUFR (0x00000040)
#define WUCSR_MPR (0x00000020)
#define WUCSR_WAKE_EN (0x00000004)
#define WUCSR_MPEN (0x00000002)
/* Chip ID values */
#define CHIP_9115 0x115
#define CHIP_9116 0x116
#define CHIP_9117 0x117
#define CHIP_9118 0x118
#define CHIP_9215 0x115a
#define CHIP_9216 0x116a
#define CHIP_9217 0x117a
#define CHIP_9218 0x118a
struct chip_id {
u16 id;
char *name;
};
static const struct chip_id chip_ids[] = {
{ CHIP_9115, "LAN9115" },
{ CHIP_9116, "LAN9116" },
{ CHIP_9117, "LAN9117" },
{ CHIP_9118, "LAN9118" },
{ CHIP_9215, "LAN9215" },
{ CHIP_9216, "LAN9216" },
{ CHIP_9217, "LAN9217" },
{ CHIP_9218, "LAN9218" },
{ 0, NULL },
};
#define DRIVERNAME "smc911x"
u32 smc911x_get_mac_csr(u8 reg)
{
while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg;
while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
return MAC_CSR_DATA;
}
void smc911x_set_mac_csr(u8 reg, u32 data)
{
while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
MAC_CSR_DATA = data;
MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg;
while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); }
static int smx911x_handle_mac_address(bd_t *bd)
{
unsigned long addrh, addrl;
unsigned char *m = bd->bi_enetaddr;
/* if the environment has a valid mac address then use it */
if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) {
addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24;
addrh = m[4] | m[5] << 8;
smc911x_set_mac_csr(ADDRH, addrh);
smc911x_set_mac_csr(ADDRL, addrl);
} else {
/* if not, try to get one from the eeprom */
addrh = smc911x_get_mac_csr(ADDRH);
addrl = smc911x_get_mac_csr(ADDRL);
m[0] = (addrl) & 0xff;
m[1] = (addrl >> 8) & 0xff;
m[2] = (addrl >> 16) & 0xff;
m[3] = (addrl >> 24) & 0xff;
m[4] = (addrh) & 0xff;
m[5] = (addrh >> 8) & 0xff;
/* we get 0xff when there is no eeprom connected */
if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) {
printf(DRIVERNAME ": no valid mac address "
"in environment "
"and no eeprom found\n");
return -1;
}
}
printf(DRIVERNAME ": MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
m[0], m[1], m[2], m[3], m[4], m[5]);
return 0;
}
static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val)
{
while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY);
while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
*val = smc911x_get_mac_csr(MII_DATA);
return 0;
}
static int smc911x_miiphy_write(u8 phy, u8 reg, u16 val)
{
while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
smc911x_set_mac_csr(MII_DATA, val);
smc911x_set_mac_csr(MII_ACC,
phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE);
while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
return 0;
}
static int smc911x_phy_reset(void)
{
u32 reg;
reg = PMT_CTRL;
reg &= ~0xfffff030;
reg |= PMT_CTRL_PHY_RST;
PMT_CTRL = reg;
mdelay(100);
return 0;
}
static void smc911x_phy_configure(void)
{
int timeout;
u16 status;
smc911x_phy_reset();
smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET);
mdelay(1);
smc911x_miiphy_write(1, PHY_ANAR, 0x01e1);
smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
timeout = 5000;
do {
mdelay(1);
if ((timeout--) == 0)
goto err_out;
if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0)
goto err_out;
} while (!(status & PHY_BMSR_LS));
printf(DRIVERNAME ": phy initialized\n");
return;
err_out:
printf(DRIVERNAME ": autonegotiation timed out\n"); }
static void smc911x_reset(void)
{
int timeout;
/* Take out of PM setting first */
if (PMT_CTRL & PMT_CTRL_READY) {
/* Write to the bytetest will take out of powerdown */
BYTE_TEST = 0x0;
timeout = 10;
while (timeout-- && !(PMT_CTRL & PMT_CTRL_READY))
udelay(10);
if (!timeout) {
printf(DRIVERNAME
": timeout waiting for PM restore\n");
return;
}
}
/* Disable interrupts */
INT_EN = 0;
HW_CFG = HW_CFG_SRST;
timeout = 1000;
while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY)
udelay(10);
if (!timeout) {
printf(DRIVERNAME ": reset timeout\n");
return;
}
/* Reset the FIFO level and flow control settings */
smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
AFC_CFG = 0x0050287F;
/* Set to LED outputs */
GPIO_CFG = 0x70070000;
}
static void smc911x_enable(void)
{
/* Enable TX */
HW_CFG = 8 << 16 | HW_CFG_SF;
GPT_CFG = GPT_CFG_TIMER_EN | 10000;
TX_CFG = TX_CFG_TX_ON;
/* no padding to start of packets */
RX_CFG = 0;
smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);
}
int eth_init(bd_t *bd)
{
unsigned long val, i;
printf(DRIVERNAME ": initializing\n");
val = BYTE_TEST;
if (val != 0x87654321) {
printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val);
goto err_out;
}
val = ID_REV >> 16;
for (i = 0; chip_ids[i].id != 0; i++) {
if (chip_ids[i].id == val)
break;
}
if (!chip_ids[i].id) {
printf(DRIVERNAME ": Unknown chip ID %04x\n", val);
goto err_out;
}
printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);
smc911x_reset();
/* Configure the PHY, initialize the link state */
smc911x_phy_configure();
if (smx911x_handle_mac_address(bd))
goto err_out;
/* Turn on Tx + Rx */
smc911x_enable();
return 0;
err_out:
return -1;
}
int eth_send(volatile void *packet, int length)
{
u32 *data = (u32 *)packet;
u32 tmplen;
u32 status;
TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length;
TX_DATA_FIFO = length;
tmplen = (length + 3) / 4;
while (tmplen--)
TX_DATA_FIFO = *data++;
/* wait for transmission */
while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16));
/* get status. Ignore 'no carrier' error, it has no meaning for
* full duplex operation
*/
status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL |
TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
if (!status)
return 0;
printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n",
status & TX_STS_LOC ? "TX_STS_LOC " : "",
status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "",
status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "",
status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "",
status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : "");
return -1;
}
void eth_halt(void)
{
smc911x_reset();
}
int eth_rx(void)
{
u32 *data = (u32 *)NetRxPackets[0];
u32 pktlen, tmplen;
u32 status;
if ((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) {
status = RX_STATUS_FIFO;
pktlen = (status & RX_STS_PKT_LEN) >> 16;
RX_CFG = 0;
tmplen = (pktlen + 2 + 3) / 4;
while (tmplen--)
*data++ = RX_DATA_FIFO;
if (status & RX_STS_ES)
printf(DRIVERNAME
": dropped bad packet. Status: 0x%08x\n",
status);
else
NetReceive(NetRxPackets[0], pktlen);
}
return 0;
}
#endif /* CONFIG_DRIVER_SMC911X */

View File

@ -150,8 +150,6 @@ typedef volatile unsigned int * dv_reg_p;
#define VDD3P3V_PWDN (0x01c40048)
#define UART0_PWREMU_MGMT (0x01c20030)
#define UART1_PWREMU_MGMT (0x01c20430)
#define UART2_PWREMU_MGMT (0x01c20830)
#define PSC_SILVER_BULLET (0x01c41a20)

View File

@ -1,151 +0,0 @@
/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MX31_REGS_H
#define __ASM_ARCH_MX31_REGS_H
#define __REG(x) (*((volatile u32 *)(x)))
#define __REG16(x) (*((volatile u16 *)(x)))
#define __REG8(x) (*((volatile u8 *)(x)))
#define CCM_BASE 0x53f80000
#define CCM_CCMR (CCM_BASE + 0x00)
#define CCM_PDR0 (CCM_BASE + 0x04)
#define CCM_PDR1 (CCM_BASE + 0x08)
#define CCM_RCSR (CCM_BASE + 0x0c)
#define CCM_MPCTL (CCM_BASE + 0x10)
#define CCM_UPCTL (CCM_BASE + 0x10)
#define CCM_SPCTL (CCM_BASE + 0x18)
#define CCM_COSR (CCM_BASE + 0x1C)
#define CCMR_MDS (1 << 7)
#define CCMR_SBYCS (1 << 4)
#define CCMR_MPE (1 << 3)
#define CCMR_PRCS_MASK (3 << 1)
#define CCMR_FPM (1 << 1)
#define CCMR_CKIH (2 << 1)
#define PDR0_CSI_PODF(x) (((x) & 0x1ff) << 23)
#define PDR0_PER_PODF(x) (((x) & 0x1f) << 16)
#define PDR0_HSP_PODF(x) (((x) & 0x7) << 11)
#define PDR0_NFC_PODF(x) (((x) & 0x7) << 8)
#define PDR0_IPG_PODF(x) (((x) & 0x3) << 6)
#define PDR0_MAX_PODF(x) (((x) & 0x7) << 3)
#define PDR0_MCU_PODF(x) ((x) & 0x7)
#define PLL_PD(x) (((x) & 0xf) << 26)
#define PLL_MFD(x) (((x) & 0x3ff) << 16)
#define PLL_MFI(x) (((x) & 0xf) << 10)
#define PLL_MFN(x) (((x) & 0x3ff) << 0)
#define WEIM_BASE 0xb8002000
#define CSCR_U(x) (WEIM_BASE + (x) * 0x10)
#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10)
#define CSCR_A(x) (WEIM_BASE + 8 + (x) * 0x10)
#define IOMUXC_BASE 0x43FAC000
#define IOMUXC_GPR (IOMUXC_BASE + 0x8)
#define IOMUXC_SW_MUX_CTL(x) (IOMUXC_BASE + 0xc + (x) * 4)
#define IOMUXC_SW_PAD_CTL(x) (IOMUXC_BASE + 0x154 + (x) * 4)
#define IPU_BASE 0x53fc0000
#define IPU_CONF IPU_BASE
#define IPU_CONF_PXL_ENDIAN (1<<8)
#define IPU_CONF_DU_EN (1<<7)
#define IPU_CONF_DI_EN (1<<6)
#define IPU_CONF_ADC_EN (1<<5)
#define IPU_CONF_SDC_EN (1<<4)
#define IPU_CONF_PF_EN (1<<3)
#define IPU_CONF_ROT_EN (1<<2)
#define IPU_CONF_IC_EN (1<<1)
#define IPU_CONF_SCI_EN (1<<0)
#define WDOG_BASE 0x53FDC000
/*
* Signal Multiplexing (IOMUX)
*/
/* bits in the SW_MUX_CTL registers */
#define MUX_CTL_OUT_GPIO_DR (0 << 4)
#define MUX_CTL_OUT_FUNC (1 << 4)
#define MUX_CTL_OUT_ALT1 (2 << 4)
#define MUX_CTL_OUT_ALT2 (3 << 4)
#define MUX_CTL_OUT_ALT3 (4 << 4)
#define MUX_CTL_OUT_ALT4 (5 << 4)
#define MUX_CTL_OUT_ALT5 (6 << 4)
#define MUX_CTL_OUT_ALT6 (7 << 4)
#define MUX_CTL_IN_NONE (0 << 0)
#define MUX_CTL_IN_GPIO (1 << 0)
#define MUX_CTL_IN_FUNC (2 << 0)
#define MUX_CTL_IN_ALT1 (4 << 0)
#define MUX_CTL_IN_ALT2 (8 << 0)
#define MUX_CTL_FUNC (MUX_CTL_OUT_FUNC | MUX_CTL_IN_FUNC)
#define MUX_CTL_ALT1 (MUX_CTL_OUT_ALT1 | MUX_CTL_IN_ALT1)
#define MUX_CTL_ALT2 (MUX_CTL_OUT_ALT2 | MUX_CTL_IN_ALT2)
#define MUX_CTL_GPIO (MUX_CTL_OUT_GPIO_DR | MUX_CTL_IN_GPIO)
/* Register offsets based on IOMUXC_BASE */
/* 0x00 .. 0x7b */
#define MUX_CTL_RTS1 0x7c
#define MUX_CTL_CTS1 0x7d
#define MUX_CTL_DTR_DCE1 0x7e
#define MUX_CTL_DSR_DCE1 0x7f
#define MUX_CTL_CSPI2_SCLK 0x80
#define MUX_CTL_CSPI2_SPI_RDY 0x81
#define MUX_CTL_RXD1 0x82
#define MUX_CTL_TXD1 0x83
#define MUX_CTL_CSPI2_MISO 0x84
/* 0x85 .. 0x8a */
#define MUX_CTL_CSPI2_MOSI 0x8b
/* The modes a specific pin can be in
* these macros can be used in mx31_gpio_mux() and have the form
* MUX_[contact name]__[pin function]
*/
#define MUX_RXD1__UART1_RXD_MUX ((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1)
#define MUX_TXD1__UART1_TXD_MUX ((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1)
#define MUX_RTS1__UART1_RTS_B ((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1)
#define MUX_RTS1__UART1_CTS_B ((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1)
#define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI)
#define MUX_CSPI2_MISO__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO)
/*
* Memory regions and CS
*/
#define IPU_MEM_BASE 0x70000000
#define CSD0_BASE 0x80000000
#define CSD1_BASE 0x90000000
#define CS0_BASE 0xA0000000
#define CS1_BASE 0xA8000000
#define CS2_BASE 0xB0000000
#define CS3_BASE 0xB2000000
#define CS4_BASE 0xB4000000
#define CS4_PSRAM_BASE 0xB5000000
#define CS5_BASE 0xB6000000
#define PCMCIA_MEM_BASE 0xC0000000
#endif /* __ASM_ARCH_MX31_REGS_H */

View File

@ -1,32 +0,0 @@
/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MX31_H
#define __ASM_ARCH_MX31_H
u32 mx31_get_mpl_dpdgck_clk(void);
u32 mx31_get_mcu_main_clk(void);
u32 mx31_get_ipg_clk(void);
void mx31_gpio_mux(unsigned long mode);
#endif /* __ASM_ARCH_MX31_H */

View File

@ -52,9 +52,6 @@
#define DV_EVM
#define CFG_NAND_SMALLPAGE
#define CFG_USE_NOR
#define CFG_USE_INTEL_NOR /* Define this when your DVEVM has Intel
* flash instead of AMD flash
*/
/*===================*/
/* SoC Configuration */
/*===================*/
@ -63,24 +60,6 @@
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
#define CFG_DAVINCI_PINMUX_0 0x00000c1f
#define CFG_DAVINCI_WAITCFG 0x00000000
#define CFG_DAVINCI_ACFG2 0x3ffffffd /* CE configs */
#define CFG_DAVINCI_ACFG3 0x3ffffffd
#define CFG_DAVINCI_ACFG4 0x3ffffffd
#define CFG_DAVINCI_ACFG5 0x3ffffffd
#undef CFG_DAVINCI_NANDCE /* When using NAND, define 2,3 or 4 */
#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
#define CFG_DAVINCI_SDREF 0x000005c3
#define CFG_DAVINCI_SDCFG 0x00178632 /* 8 banks */
#define CFG_DAVINCI_SDTIM0 0x28923211
#define CFG_DAVINCI_SDTIM1 0x0016c722
#define CFG_DAVINCI_MMARG_BRF0 0x00444400
/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
#define CFG_DAVINCI_PLL1_PLLM 0x15
#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
#define CFG_DAVINCI_PLL2_DIV2 0x01
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
@ -135,7 +114,7 @@
#ifdef CFG_USE_NAND
#undef CFG_ENV_IS_IN_FLASH
#define CFG_NO_FLASH
#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
#ifdef CFG_NAND_SMALLPAGE
#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
#define CFG_ENV_SIZE SZ_16K
@ -160,31 +139,24 @@
#undef CONFIG_SKIP_RELOCATE_UBOOT
#endif
#define CFG_ENV_IS_IN_FLASH
#undef CFG_NO_FLASH
#undef CFG_NO_FLASH
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
#define CFG_ENV_OFFSET (CFG_ENV_ADDR)
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3)
#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
#ifdef CFG_USE_INTEL_NOR
#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */
#define CFG_FLASH_PROTECTION 1
#else
#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
#endif
#endif
/*==============================*/
/* U-Boot general configuration */
/*==============================*/
#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
#define CONFIG_MISC_INIT_R
#undef CONFIG_BOOTDELAY
#undef CONFIG_BOOTDELAY
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */

View File

@ -35,24 +35,6 @@
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
#define CFG_DAVINCI_PINMUX_0 0x00000c1f
#define CFG_DAVINCI_WAITCFG 0x00000000
#define CFG_DAVINCI_ACFG2 0x0432229c /* CE configs */
#define CFG_DAVINCI_ACFG3 0x3ffffffd
#define CFG_DAVINCI_ACFG4 0x3ffffffd
#define CFG_DAVINCI_ACFG5 0x3ffffffd
#define CFG_DAVINCI_NANDCE 2 /* When using NAND, define 2,3 or 4 */
#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
#define CFG_DAVINCI_SDREF 0x000005c3
#define CFG_DAVINCI_SDCFG 0x00178622 /* 4 banks */
#define CFG_DAVINCI_SDTIM0 0x28923211
#define CFG_DAVINCI_SDTIM1 0x0016c722
#define CFG_DAVINCI_MMARG_BRF0 0x00444400
/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
#define CFG_DAVINCI_PLL1_PLLM 0x15
#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
#define CFG_DAVINCI_PLL2_DIV2 0x01
/*=============*/
/* Memory Info */
/*=============*/
@ -64,6 +46,7 @@
#define CONFIG_STACKSIZE (256*1024) /* regular stack */
#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
/*====================*/
/* Serial Driver info */
/*====================*/

View File

@ -60,24 +60,6 @@
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
#define CFG_DAVINCI_PINMUX_0 0x00000c1f
#define CFG_DAVINCI_WAITCFG 0x00000000
#define CFG_DAVINCI_ACFG2 0x3ffffffd /* CE configs */
#define CFG_DAVINCI_ACFG3 0x3ffffffd
#define CFG_DAVINCI_ACFG4 0x3ffffffd
#define CFG_DAVINCI_ACFG5 0x3ffffffd
#undef CFG_DAVINCI_NANDCE /* When using NAND, define 2,3 or 4 */
#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
#define CFG_DAVINCI_SDREF 0x000005c3
#define CFG_DAVINCI_SDCFG 0x00178632 /* 8 banks */
#define CFG_DAVINCI_SDTIM0 0x28923211
#define CFG_DAVINCI_SDTIM1 0x0016c722
#define CFG_DAVINCI_MMARG_BRF0 0x00444400
/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
#define CFG_DAVINCI_PLL1_PLLM 0x15
#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
#define CFG_DAVINCI_PLL2_DIV2 0x01
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */

View File

@ -1,167 +0,0 @@
/*
* (C) Copyright 2004
* Texas Instruments.
* Richard Woodruff <r-woodruff2@ti.com>
* Kshitij Gupta <kshitij@ti.com>
*
* Configuration settings for the 242x TI H4 board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* High Level Configuration Options */
#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
#define CONFIG_MX31 1 /* in a mx31 */
#define CONFIG_MX31_HCLK_FREQ 26000000
#define CONFIG_MX31_CLK32 32000
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Temporarily disabled */
#if 0
#define CONFIG_OF_LIBFDT 1
#define CONFIG_FIT 1
#define CONFIG_FIT_VERBOSE 1
#endif
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
/*
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */
/*
* Hardware drivers
*/
#define CONFIG_MX31_UART 1
#define CFG_MX31_UART1 1
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
***********************************************************/
#include <config_cmd_default.h>
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_BOOTDELAY 3
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.23.168
#define CONFIG_SERVERIP 192.168.23.2
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
"ip=dhcp nfsroot=$(serverip):$(nfsrootfs), v3, tcp\0" \
"bootcmd=run bootcmd_net\0" \
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
"tftpboot 0x80000000 uImage-mx31; bootm\0" \
"prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; " \
"protect off all; erase 0xa00d0000 0xa01effff; " \
"cp.b 0x80000000 0xa00d0000 $(filesize)\0"
#define CONFIG_DRIVER_SMC911X 1
#define CONFIG_DRIVER_SMC911X_BASE 0xb4020000
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "uboot> "
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0 /* memtest works on */
#define CFG_MEMTEST_END 0x10000
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR 0 /* default load address */
#define CFG_HZ 32000
#define CONFIG_CMDLINE_EDITING 1
/*-----------------------------------------------------------------------
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x80000000
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define CFG_FLASH_BASE 0xa0000000
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
/* Monitor at beginning of flash */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_ENV_ADDR 0xa01f0000
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SECT_SIZE (64 * 1024)
#define CFG_ENV_SIZE (64 * 1024)
/*-----------------------------------------------------------------------
* CFI FLASH driver setup
*/
#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */
/*
* JFFS2 partitions
*/
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
#endif /* __CONFIG_H */

View File

@ -1,190 +0,0 @@
/*
* (C) Copyright 2004
* Texas Instruments.
* Richard Woodruff <r-woodruff2@ti.com>
* Kshitij Gupta <kshitij@ti.com>
*
* Configuration settings for the 242x TI H4 board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* High Level Configuration Options */
#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
#define CONFIG_MX31 1 /* in a mx31 */
#define CONFIG_MX31_HCLK_FREQ 26000000
#define CONFIG_MX31_CLK32 32000
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Temporarily disabled */
#if 0
#define CONFIG_OF_LIBFDT 1
#define CONFIG_FIT 1
#define CONFIG_FIT_VERBOSE 1
#endif
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
/*
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */
/*
* Hardware drivers
*/
#define CONFIG_HARD_I2C 1
#define CONFIG_I2C_MXC 1
#define CFG_I2C_MX31_PORT2 1
#define CFG_I2C_SPEED 100000
#define CFG_I2C_SLAVE 0xfe
#define CONFIG_MX31_UART 1
#define CFG_MX31_UART1 1
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
***********************************************************/
#include <config_cmd_default.h>
#define CONFIG_CMD_PING
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_BOOTDELAY 3
#define MTDPARTS_DEFAULT \
"mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.23.168
#define CONFIG_SERVERIP 192.168.23.2
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
"bootargs_flash=setenv bootargs $(bootargs) " \
"root=/dev/mtdblock2 rootfstype=jffs2\0" \
"bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \
"bootcmd=run bootcmd_net\0" \
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
"tftpboot 0x80000000 $(uimage); bootm\0" \
"bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; " \
"bootm 0x80000000\0" \
"unlock=yes\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"prg_uboot=tftpboot 0x80000000 $(uboot); " \
"protect off 0xa0000000 +0x20000; " \
"erase 0xa0000000 +0x20000; " \
"cp.b 0x80000000 0xa0000000 $(filesize)\0" \
"prg_kernel=tftpboot 0x80000000 $(uimage); " \
"erase 0xa0040000 +0x180000; " \
"cp.b 0x80000000 0xa0040000 $(filesize)\0" \
"prg_jffs2=tftpboot 0x80000000 $(jffs2); " \
"erase 0xa01c0000 0xa1ffffff; " \
"cp.b 0x80000000 0xa01c0000 $(filesize)\0"
#define CONFIG_DRIVER_SMC911X 1
#define CONFIG_DRIVER_SMC911X_BASE 0xa8000000
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "uboot> "
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0 /* memtest works on */
#define CFG_MEMTEST_END 0x10000
#define CFG_LOAD_ADDR 0 /* default load address */
#define CFG_HZ 32000
#define CONFIG_CMDLINE_EDITING 1
/*-----------------------------------------------------------------------
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below */
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x80000000
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define CFG_FLASH_BASE 0xa0000000
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 259 /* max number of sectors on one chip */
#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
#define CFG_ENV_IS_IN_EEPROM 1
#define CFG_ENV_OFFSET 0x00 /* environment starts here */
#define CFG_ENV_SIZE 4096
#define CFG_I2C_EEPROM_ADDR 0x52
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */
#define CFG_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */
/*-----------------------------------------------------------------------
* CFI FLASH driver setup
*/
#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */
/*
* JFFS2 partitions
*/
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
#endif /* __CONFIG_H */

View File

@ -1,170 +0,0 @@
/*
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
*
* Configuration settings for the MX31ADS Freescale board.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/mx31-regs.h>
/* High Level Configuration Options */
#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
#define CONFIG_MX31 1 /* in a mx31 */
#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */
#define CONFIG_MX31_CLK32 32000
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/*
* Disabled for now due to build problems under Debian and
* a significant increase in the final file size: 144260 vs. 109536 Bytes
*/
#if 0
#define CONFIG_OF_LIBFDT 1
#define CONFIG_FIT 1
#define CONFIG_FIT_VERBOSE 1
#endif
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
/*
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
#define CFG_GBL_DATA_SIZE 128 /* num bytes reserved for initial data */
/*
* Hardware drivers
*/
#define CONFIG_MX31_UART 1
#define CFG_MX31_UART1 1
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
/***********************************************************
* Command definition
***********************************************************/
#include <config_cmd_default.h>
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_BOOTDELAY 3
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.23.168
#define CONFIG_SERVERIP 192.168.23.2
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs_base=setenv bootargs console=ttymxc0,115200\0" \
"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
"bootcmd=run bootcmd_net\0" \
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
"tftpboot 0x80000000 uImage-mx31; bootm\0" \
"prg_uboot=tftpboot 0x80000000 u-boot-mx31ads.bin; " \
"protect off 0xa0000000 0xa001ffff; " \
"erase 0xa0000000 0xa001ffff; " \
"cp.b 0x80000000 0xa0000000 $(filesize)\0"
#define CONFIG_DRIVER_CS8900 1
#define CS8900_BASE 0xb4020300
#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> "
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0 /* memtest works on */
#define CFG_MEMTEST_END 0x10000
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR CSD0_BASE /* default load address */
#define CFG_HZ 32000
#define CONFIG_CMDLINE_EDITING 1
/*-----------------------------------------------------------------------
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below */
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 CSD0_BASE
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define CFG_FLASH_BASE CS0_BASE
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 262 /* max number of sectors on one chip */
#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128KiB */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SECT_SIZE (32 * 1024)
#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
/* S29WS256N NOR flash has 4 32KiB small sectors at beginning and end.
* The rest of 32MiB is in 128KiB big sectors.
* U-Boot occupies the low 4 sectors,
* if we put environment next to it, we will have to occupy 128KiB for it.
* Putting it at the top of flash we use only 32KiB. */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 32 * 1024 * 1024 - CFG_ENV_SIZE)
/*-----------------------------------------------------------------------
* CFI FLASH driver setup
*/
#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
#if 0 /* Doesn't work yet, work in progress */
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes(~10x faster)*/
#endif
#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
/*
* JFFS2 partitions
*/
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
#endif /* __CONFIG_H */

View File

@ -1,186 +0,0 @@
/*
* Copyright (C) 2008 Prodrive BV <pieter.voorthijsen@prodrive.nl>
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/sizes.h>
/*=======*/
/* Board */
/*=======*/
#define CFG_PMDRA
#define CFG_NAND_LARGEPAGE
/*===================*/
/* SoC Configuration */
/*===================*/
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_CLK_FREQ ((CFG_HZ_CLOCK * (CFG_DAVINCI_PLL1_PLLM + 1))/2)
#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CFG_HZ 1000
#define CFG_DAVINCI_PINMUX_0 0x00000c1f
#define CFG_DAVINCI_WAITCFG 0x10000000
#define CFG_DAVINCI_ACFG2 0x00460385 /* NOR CE Config */
#define CFG_DAVINCI_ACFG3 0x0822218c /* NAND CE Config */
#define CFG_DAVINCI_ACFG4 0x3ffffffd
#define CFG_DAVINCI_ACFG5 0x3ffffffd
#define CFG_DAVINCI_NANDCE 3 /* Use CE3 for NAND */
#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */
#define CFG_DAVINCI_SDREF 0x000005c3
#define CFG_DAVINCI_SDCFG 0x00178832 /* 8 banks , CAS = 4*/
#define CFG_DAVINCI_SDTIM0 0x28923211
#define CFG_DAVINCI_SDTIM1 0x0016c722
#define CFG_DAVINCI_MMARG_BRF0 0x00444400
/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */
#define CFG_DAVINCI_PLL1_PLLM 0x12
#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */
#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */
#define CFG_DAVINCI_PLL2_DIV2 0x01
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
/*====================================================*/
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_I2C_EEPROM_ADDR 0x50
#define CFG_EEPROM_PAGE_WRITE_BITS 6
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
/*=============*/
/* Memory Info */
/*=============*/
#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define CONFIG_STACKSIZE (256*1024) /* regular stack */
#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
/*====================*/
/* Serial Driver info */
/*====================*/
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
#define CFG_NS16550_COM2 0x01c20800 /* Base address of UART2 */
#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*===================*/
/* I2C Configuration */
/*===================*/
#define CONFIG_HARD_I2C
#define CONFIG_DRIVER_DAVINCI_I2C
#define CFG_I2C_SPEED 50000 /* 100Kbps won't work, silicon bug */
#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
/*==================================*/
/* Network & Ethernet Configuration */
/*==================================*/
#define CONFIG_DRIVER_TI_EMAC
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_NET_RETRY_COUNT 10
/*=====================*/
/* Flash & Environment */
/*=====================*/
#define CFG_USE_NAND
#define CFG_NAND_BASE 0x04000000
#undef CFG_NAND_HW_ECC
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_MAX_CHIPS 1
#define DEF_BOOTM ""
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
#define CFG_ENV_OFFSET (CFG_ENV_ADDR)
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster)*/
#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */
#define CFG_FLASH_PROTECTION 1
/*==============================*/
/* U-Boot general configuration */
/*==============================*/
#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
#define CONFIG_MISC_INIT_R
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
#define CONFIG_VERSION_VARIABLE
#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#define CONFIG_CMDLINE_EDITING
#define CFG_LONGHELP
#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC
#define CONFIG_ENV_OVERWRITE
/*===================*/
/* Linux Information */
/*===================*/
#define LINUX_BOOT_PARAM_ADDR 0x80000100
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS \
"mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
#define CONFIG_BOOTCOMMAND "run nand"
#define CONFIG_EXTRA_ENV_SETTINGS "ethaddr=00:11:22:33:44:55\n"
/*=================*/
/* U-Boot commands */
/*=================*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_EEPROM
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
#define CONFIG_CMD_FLASH
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_NAND
/*=======================*/
/* KGDB support (if any) */
/*=======================*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif
#endif /* __CONFIG_H */