sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

mmc: move CONFIG_GENERIC_MMC to Kconfig 

Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.

Let's create an entry for "config GENERIC_MMC" with "default MMC",
then convert all macro defines in headers to Kconfig.  Almost all
of the defines will go away.

I see only two exceptions:
  configs/blanche_defconfig
  configs/sandbox_noblk_defconfig

They define CONFIG_GENERIC_MMC, but not CONFIG_MMC.  Something
might be wrong with these two boards, so should be checked later.

Anyway, this is the output of the moveconfig tool.

This commit was created as follows:

[1] create a config entry in drivers/mmc/Kconfig

[2] tools/moveconfig.py -r HEAD GENERIC_MMC

[3] manual clean-up of garbage comments in doc/README.* and
    include/configs/*.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Masahiro Yamada 2017-01-30 19:46:49 +09:00 committed by Jaehoon Chung
parent 794c6e2c96
commit 54925327fa
189 changed files with 7 additions and 341 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
README
View File

@ -1457,9 +1457,6 @@ The following options need to be configured:
CONFIG_SH_MMCIF_CLK
Define the clock frequency for MMCIF
CONFIG_GENERIC_MMC
Enable the generic MMC driver
CONFIG_SUPPORT_EMMC_BOOT
Enable some additional features of the eMMC boot partitions.

3
configs/blanche_defconfig
View File

@ -2,7 +2,6 @@ CONFIG_ARM=y
CONFIG_ARCH_RMOBILE=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_BLANCHE=y
# CONFIG_MMC is not set
CONFIG_BOOTSTAGE_USER_COUNT=0x20
CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
@ -19,6 +18,8 @@ CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
# CONFIG_MMC is not set
CONFIG_GENERIC_MMC=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y

1
configs/sandbox_noblk_defconfig
View File

@ -100,6 +100,7 @@ CONFIG_CROS_EC_SPI=y
CONFIG_PWRSEQ=y
CONFIG_SPL_PWRSEQ=y
# CONFIG_MMC is not set
CONFIG_GENERIC_MMC=y
CONFIG_SPI_FLASH_SANDBOX=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y

2
doc/README.atmel_mci
View File

@ -69,8 +69,6 @@ int board_mmc_getcd(struct mmc *mmc)
and the board definition files needs:
/* SD/MMC card */
#define CONFIG_MMC 1
#define CONFIG_GENERIC_MMC 1
#define CONFIG_GENERIC_ATMEL_MCI 1
#define CONFIG_ATMEL_MCI_PORTB 1 /* Atmel XE-EK uses port B */
#define CONFIG_SYS_MMC_CD_PIN AT91_PIN_PC9

3
doc/README.socfpga
View File

@ -14,8 +14,5 @@ socfpga_dw_mmc
Here are macro and detailed configuration required to enable DesignWare SDMMC
controller support within SOCFPGA
#define CONFIG_GENERIC_MMC
-> Enable the generic MMC driver
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256
-> Using smaller max blk cnt to avoid flooding the limited stack in OCRAM

4
drivers/mmc/Kconfig
View File

@ -10,6 +10,10 @@ config MMC
If you want MMC/SD/SDIO support, you should say Y here and
also to your specific host controller driver.
config GENERIC_MMC
bool "Generic MMC driver framework"
default MMC
config DM_MMC
bool "Enable MMC controllers using Driver Model"
depends on DM

1
include/configs/BSC9132QDS.h
View File

@ -478,7 +478,6 @@ combinations. this should be removed later
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#endif

2
include/configs/MPC8308RDB.h
View File

@ -25,8 +25,6 @@
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_USE_PIO
#define CONFIG_GENERIC_MMC
#endif
/*

1
include/configs/MPC837XEMDS.h
View File

@ -485,7 +485,6 @@ extern int board_pci_host_broken(void);
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_ESDHC_PIN_MUX
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
#endif
/*

1
include/configs/MPC837XERDB.h
View File

@ -497,7 +497,6 @@
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_ESDHC_PIN_MUX
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
#endif
/*

1
include/configs/MPC8536DS.h
View File

@ -603,7 +603,6 @@
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
#endif
/*

1
include/configs/MPC8569MDS.h
View File

@ -463,7 +463,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_ESDHC_PIN_MUX
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
#endif
/*

1
include/configs/P1010RDB.h
View File

@ -669,7 +669,6 @@ extern unsigned long get_sdram_size(void);
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#endif

1
include/configs/P1022DS.h
View File

@ -504,7 +504,6 @@
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#endif

1
include/configs/P2041RDB.h
View File

@ -606,7 +606,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
#endif
/* Hash command with SHA acceleration supported in hardware */

1
include/configs/T102xQDS.h
View File

@ -654,7 +654,6 @@ unsigned long get_board_ddr_clk(void);
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
#endif
/* Qman/Bman */

1
include/configs/T102xRDB.h
View File

@ -658,7 +658,6 @@ unsigned long get_board_ddr_clk(void);
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
#endif
/* Qman/Bman */

1
include/configs/T1040QDS.h
View File

@ -542,7 +542,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
#define CONFIG_FSL_ESDHC_ADAPTER_IDENT
#endif

1
include/configs/T104xRDB.h
View File

@ -652,7 +652,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
#endif
/* Qman/Bman */

1
include/configs/T208xQDS.h
View File

@ -721,7 +721,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
#define CONFIG_FSL_ESDHC_ADAPTER_IDENT
#endif

1
include/configs/T208xRDB.h
View File

@ -670,7 +670,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
#endif
/*

1
include/configs/T4240QDS.h
View File

@ -519,7 +519,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_ESDHC_DETECT_QUIRK \
(!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \

1
include/configs/T4240RDB.h
View File

@ -699,7 +699,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#endif

1
include/configs/UCP1020.h
View File

@ -473,7 +473,6 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_MMC_SPI
#define CONFIG_CMD_MMC_SPI
#define CONFIG_GENERIC_MMC
#endif
/* Misc Extra Settings */

1
include/configs/adp-ag101p.h
View File

@ -100,7 +100,6 @@
/*
* SD (MMC) controller
*/
#define CONFIG_GENERIC_MMC
#define CONFIG_FTSDC010
#define CONFIG_FTSDC010_NUMBER 1
#define CONFIG_FTSDC010_SDIO

1
include/configs/advantech_dms-ba16.h
View File

@ -52,7 +52,6 @@
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
/* USB Configs */

2
include/configs/alt.h
View File

@ -87,8 +87,6 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
/* MMCIF */
#define CONFIG_GENERIC_MMC
#define CONFIG_SH_MMCIF
#define CONFIG_SH_MMCIF_ADDR 0xee200000
#define CONFIG_SH_MMCIF_CLK 48000000

1
include/configs/am3517_crane.h
View File

@ -75,7 +75,6 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define CONFIG_GENERIC_MMC 1
/*
* USB configuration

3
include/configs/am3517_evm.h
View File

@ -76,9 +76,6 @@
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
/* SD/MMC */
#define CONFIG_GENERIC_MMC
/*
* USB configuration
* Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard

1
include/configs/apalis_imx6.h
View File

@ -67,7 +67,6 @@
#define CONFIG_SYS_FSL_USDHC_NUM 3
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_FAT_WRITE

3
include/configs/apalis_t30.h
View File

@ -25,9 +25,6 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
/* SD/MMC support */
#define CONFIG_GENERIC_MMC
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \

1
include/configs/apf27.h
View File

@ -307,7 +307,6 @@
* SD/MMC
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_MXC_MCI_REGS_BASE 0x10014000
#endif

1
include/configs/at91sam9260ek.h
View File

@ -145,7 +145,6 @@
/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

1
include/configs/at91sam9263ek.h
View File

@ -103,7 +103,6 @@
/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

1
include/configs/at91sam9m10g45ek.h
View File

@ -98,7 +98,6 @@
/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

1
include/configs/at91sam9n12ek.h
View File

@ -122,7 +122,6 @@
/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

1
include/configs/at91sam9rlek.h
View File

@ -105,7 +105,6 @@
/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

1
include/configs/at91sam9x5ek.h
View File

@ -110,7 +110,6 @@
/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

1
include/configs/atngw100.h
View File

@ -85,7 +85,6 @@
#define CONFIG_SYS_NR_PIOS 5
#define CONFIG_SYS_HSDRAMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
#define CONFIG_ATMEL_SPI
#define CONFIG_SYS_DCACHE_LINESZ 32

1
include/configs/atngw100mkii.h
View File

@ -104,7 +104,6 @@
#define CONFIG_SYS_NR_PIOS 5
#define CONFIG_SYS_HSDRAMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
#define CONFIG_ATMEL_SPI
#define CONFIG_SYS_DCACHE_LINESZ 32

1
include/configs/atstk1002.h
View File

@ -106,7 +106,6 @@
#define CONFIG_SYS_NR_PIOS 5
#define CONFIG_SYS_HSDRAMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_DCACHE_LINESZ 32
#define CONFIG_SYS_ICACHE_LINESZ 32

5
include/configs/axs10x.h
View File

@ -81,11 +81,6 @@
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 64
/*
* SD/MMC configuration
*/
#define CONFIG_GENERIC_MMC
/*
* Ethernet PHY configuration
*/

2
include/configs/bayleybay.h
View File

@ -23,8 +23,6 @@
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}
#define CONFIG_GENERIC_MMC
/* Environment configuration */
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_OFFSET 0x006ff000

2
include/configs/bcm23550_w1d.h
View File

@ -31,8 +31,6 @@
#define CONFIG_KONA_GPIO
/* MMC/SD Driver */
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR

2
include/configs/bcm28155_ap.h
View File

@ -30,8 +30,6 @@
#define CONFIG_KONA_GPIO
/* MMC/SD Driver */
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR
#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR
#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR

3
include/configs/beaver.h
View File

@ -26,9 +26,6 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
/* SD/MMC */
#define CONFIG_GENERIC_MMC
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)

1
include/configs/bf518f-ezbrd.h
View File

@ -128,7 +128,6 @@
* SDH Settings
*/
#if !defined(__ADSPBF512__)
#define CONFIG_GENERIC_MMC
#define CONFIG_BFIN_SDH
#endif

1
include/configs/bf527-ad7160-eval.h
View File

@ -115,7 +115,6 @@
/*
* SPI_MMC Settings
*/
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC_SPI
/*

3
include/configs/bf537-stamp.h
View File

@ -124,9 +124,6 @@
* SPI_MMC Settings
*/
#define CONFIG_MMC_SPI
#ifdef CONFIG_MMC_SPI
#define CONFIG_GENERIC_MMC
#endif
/*
* NAND Settings

1
include/configs/bf548-ezkit.h
View File

@ -142,7 +142,6 @@
* SDH Settings
*/
#if !defined(__ADSPBF544__)
#define CONFIG_GENERIC_MMC
#define CONFIG_BFIN_SDH
#endif

1
include/configs/bf609-ezkit.h
View File

@ -126,7 +126,6 @@
/*
* SDH Settings
*/
#define CONFIG_GENERIC_MMC
#define CONFIG_BFIN_SDH
/*

2
include/configs/blanche.h
View File

@ -95,8 +95,6 @@
/* USB */
#undef CONFIG_CMD_USB
#define CONFIG_GENERIC_MMC
/* Module stop status bits */
/* INTC-RT */
#define CONFIG_SMSTP0_ENA 0x00400000

1
include/configs/brppt1.h
View File

@ -48,7 +48,6 @@
/* MMC/SD IP block */
#if defined(CONFIG_EMMC_BOOT)
#define CONFIG_GENERIC_MMC
#define CONFIG_SUPPORT_EMMC_BOOT
#endif /* CONFIG_EMMC_BOOT */

1
include/configs/brxre1.h
View File

@ -43,7 +43,6 @@
/* GPIO */
/* MMC/SD IP block */
#define CONFIG_GENERIC_MMC
#define CONFIG_SUPPORT_EMMC_BOOT
/* Always 64 KiB env size */

3
include/configs/cardhu.h
View File

@ -30,9 +30,6 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
/* SD/MMC */
#define CONFIG_GENERIC_MMC
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)

3
include/configs/cei-tk1-som.h
View File

@ -29,9 +29,6 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
/* SD/MMC */
#define CONFIG_GENERIC_MMC
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)

1
include/configs/clearfog.h
View File

@ -43,7 +43,6 @@
/*
* SDIO/MMC Card Configuration
*/
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
/* Partition support */

1
include/configs/cm-bf537e.h
View File

@ -118,7 +118,6 @@
/*
* SPI_MMC Settings
*/
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC_SPI
/*

1
include/configs/cm-bf537u.h
View File

@ -116,7 +116,6 @@
/*
* SPI_MMC Settings
*/
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC_SPI
/*

2
include/configs/cm_t35.h
View File

@ -80,8 +80,6 @@
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define CONFIG_GENERIC_MMC
/* USB */
#define CONFIG_USB_OMAP3
#define CONFIG_USB_EHCI

2
include/configs/cm_t3517.h
View File

@ -87,8 +87,6 @@
#define CONFIG_OMAP_GPIO
#define CONFIG_GENERIC_MMC
/* USB */
#define CONFIG_USB_MUSB_AM35X

1
include/configs/colibri_imx6.h
View File

@ -65,7 +65,6 @@
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_FAT_WRITE

3
include/configs/colibri_t20.h
View File

@ -24,9 +24,6 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
/* SD/MMC support */
#define CONFIG_GENERIC_MMC
/* USB host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA

3
include/configs/colibri_t30.h
View File

@ -25,9 +25,6 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
/* SD/MMC support */
#define CONFIG_GENERIC_MMC
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \

2
include/configs/colibri_vf.h
View File

@ -57,8 +57,6 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
#define CONFIG_GENERIC_MMC
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */

2
include/configs/conga-qeval20-qa3-e3845.h
View File

@ -23,8 +23,6 @@
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}
#define CONFIG_GENERIC_MMC
#undef CONFIG_USB_MAX_CONTROLLER_COUNT
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1

2
include/configs/controlcenterd.h
View File

@ -206,8 +206,6 @@
/*
* MMC
*/
#define CONFIG_GENERIC_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR

1
include/configs/corenet_ds.h
View File

@ -620,7 +620,6 @@
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
#endif
/* Hash command with SHA acceleration supported in hardware */

2
include/configs/crownbay.h
View File

@ -24,8 +24,6 @@
#define CONFIG_SCSI_DEV_LIST \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
#define CONFIG_GENERIC_MMC
/* Environment configuration */
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_OFFSET 0

1
include/configs/cyrus.h
View File

@ -442,7 +442,6 @@
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
#endif
/*

5
include/configs/da850evm.h
View File

@ -310,11 +310,6 @@
#undef CONFIG_CMD_ENV
#endif
/* SD/MMC configuration */
#ifndef CONFIG_USE_NOR
#define CONFIG_GENERIC_MMC
#endif
#ifndef CONFIG_DIRECT_NOR_BOOT
/* defines for SPL */
#define CONFIG_SPL_FRAMEWORK

3
include/configs/dalmore.h
View File

@ -23,9 +23,6 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
/* SD/MMC */
#define CONFIG_GENERIC_MMC
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0

1
include/configs/db-88f6820-gp.h
View File

@ -43,7 +43,6 @@
/*
* SDIO/MMC Card Configuration
*/
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
/*

2
include/configs/dfi-bt700.h
View File

@ -28,8 +28,6 @@
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT}
#define CONFIG_GENERIC_MMC
#undef CONFIG_USB_MAX_CONTROLLER_COUNT
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1

3
include/configs/dragonboard410c.h
View File

@ -31,9 +31,6 @@
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 19000000
/* This are needed to have proper mmc support */
#define CONFIG_GENERIC_MMC
#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
/* Fixup - in init code we switch from device to host mode,

3
include/configs/e2220-1170.h
View File

@ -21,9 +21,6 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
/* SD/MMC */
#define CONFIG_GENERIC_MMC
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0

1
include/configs/ethernut5.h
View File

@ -126,7 +126,6 @@
/* MMC */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8
#endif

1
include/configs/exynos-common.h
View File

@ -37,7 +37,6 @@
#define CONFIG_BAUDRATE 115200
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
/* PWM */

3
include/configs/galileo.h
View File

@ -26,9 +26,6 @@
#undef CONFIG_SCSI_AHCI
#undef CONFIG_SCSI
/* SD/MMC support */
#define CONFIG_GENERIC_MMC
/* 10/100M Ethernet support */
#define CONFIG_DESIGNWARE_ETH
#define CONFIG_DW_ALTDESCRIPTOR

1
include/configs/ge_bx50v3.h
View File

@ -64,7 +64,6 @@
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
/* USB Configs */

1
include/configs/gose.h
View File

@ -94,7 +94,6 @@
#define CONFIG_SMSTP7_ENA 0x00200000
/* SDHI */
#define CONFIG_GENERIC_MMC
#define CONFIG_SH_SDHI_FREQ 97500000
#endif /* __GOSE_H */

3
include/configs/harmony.h
View File

@ -26,9 +26,6 @@
#define CONFIG_MACH_TYPE MACH_TYPE_HARMONY
/* SD/MMC */
#define CONFIG_GENERIC_MMC
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_TEGRA_NAND

1
include/configs/hikey.h
View File

@ -69,7 +69,6 @@
#define CONFIG_HIKEY_GPIO
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_FS_EXT4

2
include/configs/hrcon.h
View File

@ -26,8 +26,6 @@
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FPGAD
#define CONFIG_CMD_IOLOOP

5
include/configs/imx27lite-common.h
View File

@ -134,11 +134,6 @@
#define CONFIG_JFFS2_NAND
#define CONFIG_MXC_NAND_HWECC
/*
* SD/MMC
*/
#define CONFIG_GENERIC_MMC
/*
* GPIO
*/

3
include/configs/jetson-tk1.h
View File

@ -25,9 +25,6 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
/* SD/MMC */
#define CONFIG_GENERIC_MMC
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)

3
include/configs/k2g_evm.h
View File

@ -60,9 +60,6 @@
#define CONFIG_PHY_MICREL
#define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */
/* MMC/SD */
#define CONFIG_GENERIC_MMC
#undef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"

6
include/configs/kc1.h
View File

@ -84,12 +84,6 @@
#define CONFIG_SYS_NO_FLASH
/*
* MMC
*/
#define CONFIG_GENERIC_MMC
/*
* Power
*/

1
include/configs/koelsch.h
View File

@ -94,7 +94,6 @@
#define CONFIG_SMSTP7_ENA 0x00200000
/* SD */
#define CONFIG_GENERIC_MMC
#define CONFIG_SH_SDHI_FREQ 97500000
#endif /* __KOELSCH_H */

2
include/configs/lager.h
View File

@ -86,8 +86,6 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
/* MMC */
#define CONFIG_GENERIC_MMC
#define CONFIG_SH_MMCIF
#define CONFIG_SH_MMCIF_ADDR 0xEE220000
#define CONFIG_SH_MMCIF_CLK 97500000

3
include/configs/legoev3.h
View File

@ -213,9 +213,6 @@
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_SIZE (16 << 10)
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
/* additions for new relocation code, must added to all boards */
#define CONFIG_SYS_SDRAM_BASE 0xc0000000

1
include/configs/ls1012aqds.h
View File

@ -134,7 +134,6 @@
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
#endif
/* SATA */

1
include/configs/ls1012ardb.h
View File

@ -47,7 +47,6 @@
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
#endif
/* SATA */

1
include/configs/ls1021aiot.h
View File

@ -156,7 +156,6 @@
*/
#define CONFIG_CMD_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
/* SATA */
#define CONFIG_CMD_SCSI

1
include/configs/ls1021aqds.h
View File

@ -393,7 +393,6 @@ unsigned long get_board_ddr_clk(void);
* MMC
*/
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
/* SPI */
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)

1
include/configs/ls1021atwr.h
View File

@ -294,7 +294,6 @@
* MMC
*/
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
/* SPI */
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)

1
include/configs/ls1043a_common.h
View File

@ -130,7 +130,6 @@
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
#endif
/* DSPI */

1
include/configs/ls1046a_common.h
View File

@ -116,7 +116,6 @@
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
#endif
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */

1
include/configs/ls2080a_simu.h
View File

@ -136,7 +136,6 @@
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
#endif
/* Debug Server firmware */

1
include/configs/ls2080aqds.h
View File

@ -353,7 +353,6 @@ unsigned long get_board_ddr_clk(void);
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_GENERIC_MMC
#endif
/* Initial environment variables */

Some files were not shown because too many files have changed in this diff Show More